--- /dev/null
+/*
+ * Test Gadget
+ *
+ * (c) 2020 Martin Mareš <mj@ucw.cz>
+ */
+
+#include "util.h"
+
+#include <libopencm3/cm3/cortex.h>
+#include <libopencm3/cm3/nvic.h>
+#include <libopencm3/cm3/systick.h>
+#include <libopencm3/cm3/scb.h>
+#include <libopencm3/stm32/rcc.h>
+#include <libopencm3/stm32/desig.h>
+#include <libopencm3/stm32/gpio.h>
+#include <libopencm3/stm32/usart.h>
+#include <libopencm3/stm32/i2c.h>
+#include <libopencm3/usb/dfu.h>
+#include <libopencm3/usb/usbd.h>
+
+#include <string.h>
+
+/*** Hardware init ***/
+
+static void clock_init(void)
+{
+ rcc_clock_setup_in_hse_8mhz_out_72mhz();
+
+ rcc_periph_clock_enable(RCC_GPIOA);
+ rcc_periph_clock_enable(RCC_GPIOB);
+ rcc_periph_clock_enable(RCC_GPIOC);
+ rcc_periph_clock_enable(RCC_I2C1);
+ rcc_periph_clock_enable(RCC_USART1);
+ rcc_periph_clock_enable(RCC_USB);
+
+ rcc_periph_reset_pulse(RST_GPIOA);
+ rcc_periph_reset_pulse(RST_GPIOB);
+ rcc_periph_reset_pulse(RST_GPIOC);
+ rcc_periph_reset_pulse(RST_I2C1);
+ rcc_periph_reset_pulse(RST_USART1);
+ rcc_periph_reset_pulse(RST_USB);
+}
+
+static void gpio_init(void)
+{
+ // PA9 = TXD1 for debugging console
+ // PA10 = RXD1 for debugging console
+ gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO9);
+ gpio_set_mode(GPIOA, GPIO_MODE_INPUT, GPIO_CNF_INPUT_FLOAT, GPIO10);
+
+ // PC13 = BluePill LED
+ gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO13);
+ gpio_clear(GPIOC, GPIO13);
+
+ // PB7 = SDA for display controller
+ // PB6 = SCL for display controller
+ gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_ALTFN_OPENDRAIN, GPIO6 | GPIO7);
+}
+
+static void usart_init(void)
+{
+ usart_set_baudrate(USART1, 115200);
+ usart_set_databits(USART1, 8);
+ usart_set_stopbits(USART1, USART_STOPBITS_1);
+ usart_set_mode(USART1, USART_MODE_TX);
+ usart_set_parity(USART1, USART_PARITY_NONE);
+ usart_set_flow_control(USART1, USART_FLOWCONTROL_NONE);
+
+ usart_enable(USART1);
+}
+
+/*** System ticks ***/
+
+static volatile u32 ms_ticks;
+
+void sys_tick_handler(void)
+{
+ ms_ticks++;
+}
+
+static void tick_init(void)
+{
+ systick_set_frequency(1000, CPU_CLOCK_MHZ * 1000000);
+ systick_counter_enable();
+ systick_interrupt_enable();
+}
+
+static void delay_ms(uint ms)
+{
+ u32 start_ticks = ms_ticks;
+ while (ms_ticks - start_ticks < ms)
+ ;
+}
+
+/*** Display ***/
+
+/*
+ * Display digits:
+ *
+ * ---- 20 ----
+ * | |
+ * | |
+ * 40 10
+ * | |
+ * | |
+ * ---- 80 ----
+ * | |
+ * | |
+ * 08 02
+ * | |
+ * | |
+ * ---- 04 ----
+ * (01)
+ */
+
+
+static void display_init(void)
+{
+ debug_puts("I2C init\n");
+ i2c_peripheral_disable(I2C1);
+ i2c_set_speed(I2C1, i2c_speed_sm_100k, CPU_CLOCK_MHZ);
+ i2c_peripheral_enable(I2C1);
+
+ debug_puts("I2C transfer\n");
+
+ // byte disp[] = { 0x7f, 0x12, 0xb6, 0xd2 };
+ byte disp[] = { 0xff, 0xff, 0xff, 0xff };
+ byte cmds[] = { 0x00, 0x47, 0, 0, 0, 0 };
+ cmds[2] = (disp[0] & 0xf0) | (disp[2] >> 4);
+ cmds[3] = (disp[1] & 0xf0) | (disp[3] >> 4);
+ cmds[4] = (disp[2] & 0x0f) | (disp[0] << 4);
+ cmds[5] = (disp[3] & 0x0f) | (disp[1] << 4);
+ i2c_transfer7(I2C1, 0x70/2, (byte *) cmds, sizeof(cmds), NULL, 0);
+
+ debug_puts("I2C done\n");
+}
+
+/*** USB ***/
+
+static usbd_device *usbd_dev;
+
+enum usb_string {
+ STR_MANUFACTURER = 1,
+ STR_PRODUCT,
+ STR_SERIAL,
+};
+
+static char usb_serial_number[13];
+
+static const char *usb_strings[] = {
+ "United Computer Wizards",
+ "Test Gadget",
+ usb_serial_number,
+};
+
+static const struct usb_device_descriptor device = {
+ .bLength = USB_DT_DEVICE_SIZE,
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = 0x0200,
+ .bDeviceClass = 0xFF,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0,
+ .bMaxPacketSize0 = 64,
+ .idVendor = 0x4242,
+ .idProduct = 0x0007,
+ .bcdDevice = 0x0000,
+ .iManufacturer = STR_MANUFACTURER,
+ .iProduct = STR_PRODUCT,
+ .iSerialNumber = STR_SERIAL,
+ .bNumConfigurations = 1,
+};
+
+static const struct usb_endpoint_descriptor endpoints[] = {{
+ // Bulk end-point for sending values to DMX
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x01,
+ .bmAttributes = USB_ENDPOINT_ATTR_BULK,
+ .wMaxPacketSize = 64,
+ .bInterval = 1,
+}};
+
+static const struct usb_interface_descriptor iface = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 1,
+ .bInterfaceClass = 0xFF,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .iInterface = 0,
+ .endpoint = endpoints,
+};
+
+static const struct usb_dfu_descriptor dfu_function = {
+ .bLength = sizeof(struct usb_dfu_descriptor),
+ .bDescriptorType = DFU_FUNCTIONAL,
+ .bmAttributes = USB_DFU_CAN_DOWNLOAD | USB_DFU_WILL_DETACH,
+ .wDetachTimeout = 255,
+ .wTransferSize = 1024,
+ .bcdDFUVersion = 0x0100,
+};
+
+static const struct usb_interface_descriptor dfu_iface = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 1,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 0,
+ .bInterfaceClass = 0xFE,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 1,
+ .iInterface = 0,
+
+ .extra = &dfu_function,
+ .extralen = sizeof(dfu_function),
+};
+
+static const struct usb_interface ifaces[] = {{
+ .num_altsetting = 1,
+ .altsetting = &iface,
+}, {
+ .num_altsetting = 1,
+ .altsetting = &dfu_iface,
+}};
+
+static const struct usb_config_descriptor config = {
+ .bLength = USB_DT_CONFIGURATION_SIZE,
+ .bDescriptorType = USB_DT_CONFIGURATION,
+ .wTotalLength = 0,
+ .bNumInterfaces = 2,
+ .bConfigurationValue = 1,
+ .iConfiguration = 0,
+ .bmAttributes = 0x80,
+ .bMaxPower = 50, // multiplied by 2 mA
+ .interface = ifaces,
+};
+
+static byte usb_configured;
+static uint8_t usbd_control_buffer[64];
+
+static void dfu_detach_complete(usbd_device *dev UNUSED, struct usb_setup_data *req UNUSED)
+{
+ // Reset to bootloader, which implements the rest of DFU
+ debug_printf("Switching to DFU\n");
+ debug_flush();
+ scb_reset_core();
+}
+
+static enum usbd_request_return_codes dfu_control_cb(usbd_device *dev UNUSED,
+ struct usb_setup_data *req,
+ uint8_t **buf UNUSED,
+ uint16_t *len UNUSED,
+ void (**complete)(usbd_device *dev, struct usb_setup_data *req))
+{
+ if (req->bmRequestType != 0x21 || req->bRequest != DFU_DETACH)
+ return USBD_REQ_NOTSUPP;
+
+ *complete = dfu_detach_complete;
+ return USBD_REQ_HANDLED;
+}
+
+# if 0
+static void ep01_cb(usbd_device *dev, uint8_t ep UNUSED)
+{
+ // We received a frame from the USB host
+ uint len = usbd_ep_read_packet(dev, 0x01, dmx_next_packet, DMX_MAX_PACKET_SIZE);
+ debug_printf("USB: Host sent %u bytes\n", len);
+}
+#endif
+
+static void set_config_cb(usbd_device *dev, uint16_t wValue UNUSED)
+{
+ usbd_register_control_callback(
+ dev,
+ USB_REQ_TYPE_CLASS | USB_REQ_TYPE_INTERFACE,
+ USB_REQ_TYPE_TYPE | USB_REQ_TYPE_RECIPIENT,
+ dfu_control_cb);
+ // usbd_ep_setup(dev, 0x01, USB_ENDPOINT_ATTR_BULK, 64, ep01_cb);
+ usb_configured = 1;
+}
+
+static void reset_cb(void)
+{
+ debug_printf("USB: Reset\n");
+ usb_configured = 0;
+}
+
+static volatile bool usb_event_pending;
+
+void usb_lp_can_rx0_isr(void)
+{
+ /*
+ * We handle USB in the main loop to avoid race conditions between
+ * USB interrupts and other code. However, we need an interrupt to
+ * up the main loop from sleep.
+ *
+ * We set up only the low-priority ISR, because high-priority ISR handles
+ * only double-buffered bulk transfers and isochronous transfers.
+ */
+ nvic_disable_irq(NVIC_USB_LP_CAN_RX0_IRQ);
+ usb_event_pending = 1;
+}
+
+static void usb_init(void)
+{
+ // Simulate USB disconnect
+ gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_OPENDRAIN, GPIO11 | GPIO12);
+ gpio_clear(GPIOA, GPIO11 | GPIO12);
+ delay_ms(100);
+
+ usbd_dev = usbd_init(
+ &st_usbfs_v1_usb_driver,
+ &device,
+ &config,
+ usb_strings,
+ ARRAY_SIZE(usb_strings),
+ usbd_control_buffer,
+ sizeof(usbd_control_buffer)
+ );
+ usbd_register_reset_callback(usbd_dev, reset_cb);
+ usbd_register_set_config_callback(usbd_dev, set_config_cb);
+ usb_event_pending = 1;
+}
+
+/*** Main ***/
+
+int main(void)
+{
+ clock_init();
+ gpio_init();
+ tick_init();
+ usart_init();
+ desig_get_unique_id_as_dfu(usb_serial_number);
+
+ debug_printf("Hello, world!\n");
+
+ usb_init();
+ display_init();
+
+ u32 last_blink = 0;
+
+ for (;;) {
+ if (ms_ticks - last_blink >= 100) {
+ debug_led_toggle();
+ last_blink = ms_ticks;
+ }
+
+ if (usb_event_pending) {
+ usbd_poll(usbd_dev);
+ usb_event_pending = 0;
+ nvic_clear_pending_irq(NVIC_USB_LP_CAN_RX0_IRQ);
+ nvic_enable_irq(NVIC_USB_LP_CAN_RX0_IRQ);
+ }
+
+ wait_for_interrupt();
+ }
+
+ return 0;
+}
projects / home-hw.git / commitdiff