--- /dev/null
+[PreviousGenFiles]\r
+HeaderPath=/aux/misc/stm/testusb/Inc\r
+HeaderFiles=stm32f1xx_it.h;stm32_assert.h;stm32f1xx_hal_conf.h;main.h;\r
+SourcePath=/aux/misc/stm/testusb/Src\r
+SourceFiles=stm32f1xx_it.c;stm32f1xx_hal_msp.c;main.c;\r
+\r
+[PreviousLibFiles]\r
+LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_i2c.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cmSimd.h;\r
+\r
+[PreviousUsedMakefileFiles]\r
+SourceFiles=Src/main.c;Src/stm32f1xx_it.c;Src/stm32f1xx_hal_msp.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;/Src/system_stm32f1xx.c;/aux/misc/stm/F1-package/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;null;\r
+HeaderPath=/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;/aux/misc/stm/F1-package/Drivers/CMSIS/Device/ST/STM32F1xx/Include;/aux/misc/stm/F1-package/Drivers/CMSIS/Include;Inc;\r
+CDefines=USE_FULL_LL_DRIVER;\r
+\r
--- /dev/null
+/**
+ ******************************************************************************
+ * @file : main.h
+ * @brief : Header for main.c file.
+ * This file contains the common defines of the application.
+ ******************************************************************************
+ ** This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * COPYRIGHT(c) 2018 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H__
+#define __MAIN_H__
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_ll_i2c.h"
+#include "stm32f1xx_ll_rcc.h"
+#include "stm32f1xx_ll_bus.h"
+#include "stm32f1xx_ll_system.h"
+#include "stm32f1xx_ll_exti.h"
+#include "stm32f1xx_ll_cortex.h"
+#include "stm32f1xx_ll_utils.h"
+#include "stm32f1xx_ll_pwr.h"
+#include "stm32f1xx_ll_dma.h"
+#include "stm32f1xx.h"
+#include "stm32f1xx_ll_gpio.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private define ------------------------------------------------------------*/
+
+#define LED_Pin LL_GPIO_PIN_13
+#define LED_GPIO_Port GPIOC
+#define BMP_DONE_Pin LL_GPIO_PIN_5
+#define BMP_DONE_GPIO_Port GPIOB
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+void _Error_Handler(char *, int);
+
+#define Error_Handler() _Error_Handler(__FILE__, __LINE__)
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file stm32_assert.h
+ * @brief STM32 assert file.
+ ******************************************************************************
+ ** This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * COPYRIGHT(c) 2018 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_ASSERT_H
+#define __STM32_ASSERT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Includes ------------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32_ASSERT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_conf.h
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2018 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CONF_H
+#define __STM32F1xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "main.h"
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+
+#define HAL_MODULE_ENABLED
+/*#define HAL_ADC_MODULE_ENABLED */
+/*#define HAL_CRYP_MODULE_ENABLED */
+/*#define HAL_CAN_MODULE_ENABLED */
+/*#define HAL_CEC_MODULE_ENABLED */
+/*#define HAL_CORTEX_MODULE_ENABLED */
+/*#define HAL_CRC_MODULE_ENABLED */
+/*#define HAL_DAC_MODULE_ENABLED */
+/*#define HAL_DMA_MODULE_ENABLED */
+/*#define HAL_ETH_MODULE_ENABLED */
+/*#define HAL_FLASH_MODULE_ENABLED */
+/*#define HAL_GPIO_MODULE_ENABLED */
+/*#define HAL_I2C_MODULE_ENABLED */
+/*#define HAL_I2S_MODULE_ENABLED */
+/*#define HAL_IRDA_MODULE_ENABLED */
+/*#define HAL_IWDG_MODULE_ENABLED */
+/*#define HAL_NOR_MODULE_ENABLED */
+/*#define HAL_NAND_MODULE_ENABLED */
+/*#define HAL_PCCARD_MODULE_ENABLED */
+#define HAL_PCD_MODULE_ENABLED
+/*#define HAL_HCD_MODULE_ENABLED */
+/*#define HAL_PWR_MODULE_ENABLED */
+/*#define HAL_RCC_MODULE_ENABLED */
+/*#define HAL_RTC_MODULE_ENABLED */
+/*#define HAL_SD_MODULE_ENABLED */
+/*#define HAL_MMC_MODULE_ENABLED */
+/*#define HAL_SDRAM_MODULE_ENABLED */
+/*#define HAL_SMARTCARD_MODULE_ENABLED */
+/*#define HAL_SPI_MODULE_ENABLED */
+/*#define HAL_SRAM_MODULE_ENABLED */
+/*#define HAL_TIM_MODULE_ENABLED */
+/*#define HAL_UART_MODULE_ENABLED */
+/*#define HAL_USART_MODULE_ENABLED */
+/*#define HAL_WWDG_MODULE_ENABLED */
+
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ * This value is used by the UART, RTC HAL module to compute the system frequency
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2
+#define MAC_ADDR1 0
+#define MAC_ADDR2 0
+#define MAC_ADDR3 0
+#define MAC_ADDR4 0
+#define MAC_ADDR5 0
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)8) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/
+#define DP83848_PHY_ADDRESS 0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
+
+#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f1xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f1xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f1xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f1xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f1xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f1xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f1xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f1xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f1xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f1xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f1xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f1xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f1xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f1xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f1xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f1xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f1xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f1xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f1xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f1xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f1xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f1xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f1xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f1xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f1xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f1xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f1xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f1xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f1xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file stm32f1xx_it.h
+ * @brief This file contains the headers of the interrupt handlers.
+ ******************************************************************************
+ *
+ * COPYRIGHT(c) 2018 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_IT_H
+#define __STM32F1xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+#include "main.h"
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+##########################################################################################################################
+# File automatically-generated by tool: [projectgenerator] version: [2.27.0] date: [Wed Jun 20 23:42:35 CEST 2018]
+##########################################################################################################################
+
+# ------------------------------------------------
+# Generic Makefile (based on gcc)
+#
+# ChangeLog :
+# 2017-02-10 - Several enhancements + project update mode
+# 2015-07-22 - first version
+# ------------------------------------------------
+
+######################################
+# target
+######################################
+TARGET = testusb
+
+
+######################################
+# building variables
+######################################
+# debug build?
+DEBUG = 1
+# optimization
+OPT = -Og
+
+
+#######################################
+# paths
+#######################################
+# source path
+SOURCES_DIR = \
+Drivers \
+Application/User/Src/main.c \
+Application/User/Src \
+Application/User/Src/stm32f1xx_hal_msp.c \
+Drivers/STM32F1xx_HAL_Driver \
+Application/User/Src/stm32f1xx_it.c \
+Application/User \
+Drivers/CMSIS \
+Application
+
+# firmware library path
+PERIFLIB_PATH =
+
+# Build path
+BUILD_DIR = build
+
+######################################
+# source
+######################################
+# C sources
+C_SOURCES = \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c \
+Src/main.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c \
+/Src/system_stm32f1xx.c \
+Src/stm32f1xx_it.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c \
+Src/stm32f1xx_hal_msp.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c \
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c
+
+# ASM sources
+ASM_SOURCES = \
+startup_stm32f103xb.s
+
+
+######################################
+# firmware library
+######################################
+PERIFLIB_SOURCES =
+
+
+#######################################
+# binaries
+#######################################
+BINPATH = /usr/bin
+PREFIX = arm-none-eabi-
+CC = $(BINPATH)/$(PREFIX)gcc
+AS = $(BINPATH)/$(PREFIX)gcc -x assembler-with-cpp
+CP = $(BINPATH)/$(PREFIX)objcopy
+AR = $(BINPATH)/$(PREFIX)ar
+SZ = $(BINPATH)/$(PREFIX)size
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary -S
+
+#######################################
+# CFLAGS
+#######################################
+# cpu
+CPU = -mcpu=cortex-m3
+
+# fpu
+# NONE for Cortex-M0/M0+/M3
+
+# float-abi
+
+
+# mcu
+MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
+
+# macros for gcc
+# AS defines
+AS_DEFS =
+
+# C defines
+C_DEFS = \
+-DUSE_FULL_LL_DRIVER \
+-DSTM32F103xB \
+-DUSE_HAL_DRIVER
+
+
+# AS includes
+AS_INCLUDES =
+
+# C includes
+C_INCLUDES = \
+-IInc \
+-I/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc \
+-I/aux/misc/stm/F1-package/Drivers/CMSIS/Device/ST/STM32F1xx/Include \
+-I/aux/misc/stm/F1-package/Drivers/CMSIS/Include \
+-I/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy
+
+
+# compile gcc flags
+ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
+
+CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
+
+ifeq ($(DEBUG), 1)
+CFLAGS += -g -gdwarf-2
+endif
+
+
+# Generate dependency information
+CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@:%.o=%.d)"
+
+
+#######################################
+# LDFLAGS
+#######################################
+# link script
+LDSCRIPT = STM32F103C8Tx_FLASH.ld
+
+# libraries
+LIBS = -lc -lm -lnosys
+LIBDIR =
+LDFLAGS = $(MCU) -specs=nano.specs -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
+
+# default action: build all
+all: $(BUILD_DIR)/$(TARGET).elf $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
+
+flash: all
+ LD_LIBRARY_PATH=../stlink ../stlink/st-flash write $(BUILD_DIR)/$(TARGET).bin 0x8000000
+
+#######################################
+# build the application
+#######################################
+# list of objects
+OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
+vpath %.c $(sort $(dir $(C_SOURCES)))
+# list of ASM program objects
+OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_SOURCES:.s=.o)))
+vpath %.s $(sort $(dir $(ASM_SOURCES)))
+
+$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
+ $(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
+
+$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
+ $(AS) -c $(CFLAGS) $< -o $@
+
+$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
+ $(CC) $(OBJECTS) $(LDFLAGS) -o $@
+ $(SZ) $@
+
+$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
+ $(HEX) $< $@
+
+$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
+ $(BIN) $< $@
+
+$(BUILD_DIR):
+ mkdir $@
+
+#######################################
+# clean up
+#######################################
+clean:
+ -rm -fR .dep $(BUILD_DIR)
+
+#######################################
+# dependencies
+#######################################
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+# *** EOF ***
--- /dev/null
+/*
+*****************************************************************************
+**
+
+** File : LinkerScript.ld
+**
+** Abstract : Linker script for STM32F103C8Tx Device with
+** 64KByte FLASH, 20KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+**
+** Distribution: The file is distributed as is, without any warranty
+** of any kind.
+**
+** (c)Copyright Ac6.
+** You may use this file as-is or modify it according to the needs of your
+** project. Distribution of this file (unmodified or modified) is not
+** permitted. Ac6 permit registered System Workbench for MCU users the
+** rights to distribute the assembled, compiled & linked contents of this
+** file as part of an application binary file, provided that it is built
+** using the System Workbench for MCU toolchain.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20005000; /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K
+FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(8);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(8);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+
--- /dev/null
+
+/**
+ ******************************************************************************
+ * @file : main.c
+ * @brief : Main program body
+ ******************************************************************************
+ ** This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * COPYRIGHT(c) 2018 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f1xx_hal.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private variables ---------------------------------------------------------*/
+
+PCD_HandleTypeDef hpcd_USB_FS;
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_I2C1_Init(void);
+static void MX_I2C2_Init(void);
+static void MX_USB_PCD_Init(void);
+
+/* USER CODE BEGIN PFP */
+/* Private function prototypes -----------------------------------------------*/
+
+/* USER CODE END PFP */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+ * @brief The application entry point.
+ *
+ * @retval None
+ */
+int main(void)
+{
+ /* USER CODE BEGIN 1 */
+
+ /* USER CODE END 1 */
+
+ /* MCU Configuration----------------------------------------------------------*/
+
+ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+ HAL_Init();
+
+ /* USER CODE BEGIN Init */
+
+ /* USER CODE END Init */
+
+ /* Configure the system clock */
+ SystemClock_Config();
+
+ /* USER CODE BEGIN SysInit */
+
+ /* USER CODE END SysInit */
+
+ /* Initialize all configured peripherals */
+ MX_GPIO_Init();
+ MX_I2C1_Init();
+ MX_I2C2_Init();
+ MX_USB_PCD_Init();
+ /* USER CODE BEGIN 2 */
+
+ /* USER CODE END 2 */
+
+ /* Infinite loop */
+ /* USER CODE BEGIN WHILE */
+ while (1)
+ {
+ LL_GPIO_SetOutputPin(LED_GPIO_Port, LED_Pin);
+ LL_mDelay(1000);
+ LL_GPIO_ResetOutputPin(LED_GPIO_Port, LED_Pin);
+ LL_mDelay(1000);
+
+ /* USER CODE END WHILE */
+
+ /* USER CODE BEGIN 3 */
+
+ }
+ /* USER CODE END 3 */
+
+}
+
+/**
+ * @brief System Clock Configuration
+ * @retval None
+ */
+void SystemClock_Config(void)
+{
+
+ LL_FLASH_SetLatency(LL_FLASH_LATENCY_2);
+
+ if(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_2)
+ {
+ Error_Handler();
+ }
+ LL_RCC_HSE_Enable();
+
+ /* Wait till HSE is ready */
+ while(LL_RCC_HSE_IsReady() != 1)
+ {
+
+ }
+ LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE_DIV_1, LL_RCC_PLL_MUL_9);
+
+ LL_RCC_PLL_Enable();
+
+ /* Wait till PLL is ready */
+ while(LL_RCC_PLL_IsReady() != 1)
+ {
+
+ }
+ LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+
+ LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_2);
+
+ LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
+
+ LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+
+ /* Wait till System clock is ready */
+ while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+ {
+
+ }
+ LL_Init1msTick(72000000);
+
+ LL_SYSTICK_SetClkSource(LL_SYSTICK_CLKSOURCE_HCLK);
+
+ LL_SetSystemCoreClock(72000000);
+
+ LL_RCC_SetUSBClockSource(LL_RCC_USB_CLKSOURCE_PLL_DIV_1_5);
+
+ /* SysTick_IRQn interrupt configuration */
+ NVIC_SetPriority(SysTick_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),0, 0));
+}
+
+/* I2C1 init function */
+static void MX_I2C1_Init(void)
+{
+
+ LL_I2C_InitTypeDef I2C_InitStruct;
+
+ LL_GPIO_InitTypeDef GPIO_InitStruct;
+
+ /**I2C1 GPIO Configuration
+ PB6 ------> I2C1_SCL
+ PB7 ------> I2C1_SDA
+ */
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_6|LL_GPIO_PIN_7;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_OPENDRAIN;
+ LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /* Peripheral clock enable */
+ LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C1);
+
+ /**I2C Initialization
+ */
+ I2C_InitStruct.PeripheralMode = LL_I2C_MODE_I2C;
+ I2C_InitStruct.ClockSpeed = 100000;
+ I2C_InitStruct.DutyCycle = LL_I2C_DUTYCYCLE_2;
+ I2C_InitStruct.OwnAddress1 = 0;
+ I2C_InitStruct.TypeAcknowledge = LL_I2C_ACK;
+ I2C_InitStruct.OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT;
+ LL_I2C_Init(I2C1, &I2C_InitStruct);
+
+ LL_I2C_SetOwnAddress2(I2C1, 0);
+
+ LL_I2C_DisableOwnAddress2(I2C1);
+
+ LL_I2C_DisableGeneralCall(I2C1);
+
+ LL_I2C_EnableClockStretching(I2C1);
+
+}
+
+/* I2C2 init function */
+static void MX_I2C2_Init(void)
+{
+
+ LL_I2C_InitTypeDef I2C_InitStruct;
+
+ LL_GPIO_InitTypeDef GPIO_InitStruct;
+
+ /**I2C2 GPIO Configuration
+ PB10 ------> I2C2_SCL
+ PB11 ------> I2C2_SDA
+ */
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_10|LL_GPIO_PIN_11;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_OPENDRAIN;
+ LL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /* Peripheral clock enable */
+ LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C2);
+
+ /**I2C Initialization
+ */
+ I2C_InitStruct.PeripheralMode = LL_I2C_MODE_I2C;
+ I2C_InitStruct.ClockSpeed = 400000;
+ I2C_InitStruct.DutyCycle = LL_I2C_DUTYCYCLE_2;
+ I2C_InitStruct.OwnAddress1 = 0;
+ I2C_InitStruct.TypeAcknowledge = LL_I2C_ACK;
+ I2C_InitStruct.OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT;
+ LL_I2C_Init(I2C2, &I2C_InitStruct);
+
+ LL_I2C_SetOwnAddress2(I2C2, 0);
+
+ LL_I2C_DisableOwnAddress2(I2C2);
+
+ LL_I2C_DisableGeneralCall(I2C2);
+
+ LL_I2C_EnableClockStretching(I2C2);
+
+}
+
+/* USB init function */
+static void MX_USB_PCD_Init(void)
+{
+
+ hpcd_USB_FS.Instance = USB;
+ hpcd_USB_FS.Init.dev_endpoints = 8;
+ hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
+ hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_64;
+ hpcd_USB_FS.Init.low_power_enable = DISABLE;
+ hpcd_USB_FS.Init.lpm_enable = DISABLE;
+ hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
+ if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
+ {
+ _Error_Handler(__FILE__, __LINE__);
+ }
+
+}
+
+/** Configure pins as
+ * Analog
+ * Input
+ * Output
+ * EVENT_OUT
+ * EXTI
+*/
+static void MX_GPIO_Init(void)
+{
+
+ LL_GPIO_InitTypeDef GPIO_InitStruct;
+
+ /* GPIO Ports Clock Enable */
+ LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOC);
+ LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOD);
+ LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOB);
+ LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOA);
+
+ /**/
+ LL_GPIO_ResetOutputPin(LED_GPIO_Port, LED_Pin);
+
+ /**/
+ GPIO_InitStruct.Pin = LED_Pin;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ LL_GPIO_Init(LED_GPIO_Port, &GPIO_InitStruct);
+
+ /**/
+ GPIO_InitStruct.Pin = BMP_DONE_Pin;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_FLOATING;
+ LL_GPIO_Init(BMP_DONE_GPIO_Port, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+ * @brief This function is executed in case of error occurrence.
+ * @param file: The file name as string.
+ * @param line: The line in file as a number.
+ * @retval None
+ */
+void _Error_Handler(char *file, int line)
+{
+ /* USER CODE BEGIN Error_Handler_Debug */
+ /* User can add his own implementation to report the HAL error return state */
+ while(1)
+ {
+ }
+ /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief Reports the name of the source file and the source line number
+ * where the assert_param error has occurred.
+ * @param file: pointer to the source file name
+ * @param line: assert_param error line source number
+ * @retval None
+ */
+void assert_failed(uint8_t* file, uint32_t line)
+{
+ /* USER CODE BEGIN 6 */
+ /* User can add his own implementation to report the file name and line number,
+ tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+ /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * File Name : stm32f1xx_hal_msp.c
+ * Description : This file provides code for the MSP Initialization
+ * and de-Initialization codes.
+ ******************************************************************************
+ ** This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * COPYRIGHT(c) 2018 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+extern void _Error_Handler(char *, int);
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+ * Initializes the Global MSP.
+ */
+void HAL_MspInit(void)
+{
+ /* USER CODE BEGIN MspInit 0 */
+
+ /* USER CODE END MspInit 0 */
+
+ __HAL_RCC_AFIO_CLK_ENABLE();
+
+ HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+ /* System interrupt init*/
+ /* MemoryManagement_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(MemoryManagement_IRQn, 0, 0);
+ /* BusFault_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(BusFault_IRQn, 0, 0);
+ /* UsageFault_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(UsageFault_IRQn, 0, 0);
+ /* SVCall_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(SVCall_IRQn, 0, 0);
+ /* DebugMonitor_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(DebugMonitor_IRQn, 0, 0);
+ /* PendSV_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(PendSV_IRQn, 0, 0);
+ /* SysTick_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
+
+ /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled
+ */
+ __HAL_AFIO_REMAP_SWJ_NOJTAG();
+
+ /* USER CODE BEGIN MspInit 1 */
+
+ /* USER CODE END MspInit 1 */
+}
+
+void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
+{
+
+ if(hpcd->Instance==USB)
+ {
+ /* USER CODE BEGIN USB_MspInit 0 */
+
+ /* USER CODE END USB_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_USB_CLK_ENABLE();
+ /* USER CODE BEGIN USB_MspInit 1 */
+
+ /* USER CODE END USB_MspInit 1 */
+ }
+
+}
+
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
+{
+
+ if(hpcd->Instance==USB)
+ {
+ /* USER CODE BEGIN USB_MspDeInit 0 */
+
+ /* USER CODE END USB_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_USB_CLK_DISABLE();
+ /* USER CODE BEGIN USB_MspDeInit 1 */
+
+ /* USER CODE END USB_MspDeInit 1 */
+ }
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file stm32f1xx_it.c
+ * @brief Interrupt Service Routines.
+ ******************************************************************************
+ *
+ * COPYRIGHT(c) 2018 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+#include "stm32f1xx.h"
+#include "stm32f1xx_it.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/******************************************************************************/
+/* Cortex-M3 Processor Interruption and Exception Handlers */
+/******************************************************************************/
+
+/**
+* @brief This function handles Non maskable interrupt.
+*/
+void NMI_Handler(void)
+{
+ /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+ /* USER CODE END NonMaskableInt_IRQn 0 */
+ /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+ /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+* @brief This function handles Hard fault interrupt.
+*/
+void HardFault_Handler(void)
+{
+ /* USER CODE BEGIN HardFault_IRQn 0 */
+
+ /* USER CODE END HardFault_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+ /* USER CODE END W1_HardFault_IRQn 0 */
+ }
+ /* USER CODE BEGIN HardFault_IRQn 1 */
+
+ /* USER CODE END HardFault_IRQn 1 */
+}
+
+/**
+* @brief This function handles Memory management fault.
+*/
+void MemManage_Handler(void)
+{
+ /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+ /* USER CODE END MemoryManagement_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+ /* USER CODE END W1_MemoryManagement_IRQn 0 */
+ }
+ /* USER CODE BEGIN MemoryManagement_IRQn 1 */
+
+ /* USER CODE END MemoryManagement_IRQn 1 */
+}
+
+/**
+* @brief This function handles Prefetch fault, memory access fault.
+*/
+void BusFault_Handler(void)
+{
+ /* USER CODE BEGIN BusFault_IRQn 0 */
+
+ /* USER CODE END BusFault_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+ /* USER CODE END W1_BusFault_IRQn 0 */
+ }
+ /* USER CODE BEGIN BusFault_IRQn 1 */
+
+ /* USER CODE END BusFault_IRQn 1 */
+}
+
+/**
+* @brief This function handles Undefined instruction or illegal state.
+*/
+void UsageFault_Handler(void)
+{
+ /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+ /* USER CODE END UsageFault_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+ /* USER CODE END W1_UsageFault_IRQn 0 */
+ }
+ /* USER CODE BEGIN UsageFault_IRQn 1 */
+
+ /* USER CODE END UsageFault_IRQn 1 */
+}
+
+/**
+* @brief This function handles System service call via SWI instruction.
+*/
+void SVC_Handler(void)
+{
+ /* USER CODE BEGIN SVCall_IRQn 0 */
+
+ /* USER CODE END SVCall_IRQn 0 */
+ /* USER CODE BEGIN SVCall_IRQn 1 */
+
+ /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+* @brief This function handles Debug monitor.
+*/
+void DebugMon_Handler(void)
+{
+ /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+ /* USER CODE END DebugMonitor_IRQn 0 */
+ /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+ /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+* @brief This function handles Pendable request for system service.
+*/
+void PendSV_Handler(void)
+{
+ /* USER CODE BEGIN PendSV_IRQn 0 */
+
+ /* USER CODE END PendSV_IRQn 0 */
+ /* USER CODE BEGIN PendSV_IRQn 1 */
+
+ /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+* @brief This function handles System tick timer.
+*/
+void SysTick_Handler(void)
+{
+ /* USER CODE BEGIN SysTick_IRQn 0 */
+
+ /* USER CODE END SysTick_IRQn 0 */
+ HAL_IncTick();
+ HAL_SYSTICK_IRQHandler();
+ /* USER CODE BEGIN SysTick_IRQn 1 */
+
+ /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F1xx Peripheral Interrupt Handlers */
+/* Add here the Interrupt Handlers for the used peripherals. */
+/* For the available peripheral interrupt handler names, */
+/* please refer to the startup file (startup_stm32f1xx.s). */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file system_stm32f1xx.c
+ * @author MCD Application Team
+ * @version V4.2.0
+ * @date 31-March-2017
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+ * factors, AHB/APBx prescalers and Flash settings).
+ * This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f1xx_xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
+ * the product used), refer to "HSE_VALUE".
+ * When HSE is used as system clock source, directly or through PLL, and you
+ * are using different crystal you have to adapt the HSE value to your own
+ * configuration.
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f1xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F1xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f1xx.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F1xx_System_Private_Defines
+ * @{
+ */
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE 8000000U /*!< Default value of the External oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE 8000000U /*!< Default value of the Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to use external SRAM */
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F1xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F1xx_System_Private_Variables
+ * @{
+ */
+
+/*******************************************************************************
+* Clock Definitions
+*******************************************************************************/
+#if defined(STM32F100xB) ||defined(STM32F100xE)
+ uint32_t SystemCoreClock = 24000000U; /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+ uint32_t SystemCoreClock = 72000000U; /*!< System Clock Frequency (Core Clock) */
+#endif
+
+const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8U] = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+#ifdef DATA_IN_ExtSRAM
+ static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F1xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the Embedded Flash Interface, the PLL and update the
+ * SystemCoreClock variable.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+void SystemInit (void)
+{
+ /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+ /* Set HSION bit */
+ RCC->CR |= 0x00000001U;
+
+ /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#if !defined(STM32F105xC) && !defined(STM32F107xC)
+ RCC->CFGR &= 0xF8FF0000U;
+#else
+ RCC->CFGR &= 0xF0FF0000U;
+#endif /* STM32F105xC */
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= 0xFEF6FFFFU;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= 0xFFFBFFFFU;
+
+ /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+ RCC->CFGR &= 0xFF80FFFFU;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+ /* Reset PLL2ON and PLL3ON bits */
+ RCC->CR &= 0xEBFFFFFFU;
+
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x00FF0000U;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000U;
+#elif defined(STM32F100xB) || defined(STM32F100xE)
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000U;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000U;
+#else
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000U;
+#endif /* STM32F105xC */
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+ #ifdef DATA_IN_ExtSRAM
+ SystemInit_ExtMemCtl();
+ #endif /* DATA_IN_ExtSRAM */
+#endif
+
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+ * 8 MHz or 25 MHz, depending on the product used), user has to ensure
+ * that HSE_VALUE is same as the real frequency of the crystal used.
+ * Otherwise, this function may have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+ uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
+#endif /* STM32F105xC */
+
+#if defined(STM32F100xB) || defined(STM32F100xE)
+ uint32_t prediv1factor = 0U;
+#endif /* STM32F100xB or STM32F100xE */
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00U: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04U: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08U: /* PLL used as system clock */
+
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+
+#if !defined(STM32F105xC) && !defined(STM32F107xC)
+ pllmull = ( pllmull >> 18U) + 2U;
+
+ if (pllsource == 0x00U)
+ {
+ /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+ }
+ else
+ {
+ #if defined(STM32F100xB) || defined(STM32F100xE)
+ prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
+ #else
+ /* HSE selected as PLL clock entry */
+ if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+ {/* HSE oscillator clock divided by 2 */
+ SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
+ }
+ else
+ {
+ SystemCoreClock = HSE_VALUE * pllmull;
+ }
+ #endif
+ }
+#else
+ pllmull = pllmull >> 18U;
+
+ if (pllmull != 0x0DU)
+ {
+ pllmull += 2U;
+ }
+ else
+ { /* PLL multiplication factor = PLL input clock * 6.5 */
+ pllmull = 13U / 2U;
+ }
+
+ if (pllsource == 0x00U)
+ {
+ /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+ }
+ else
+ {/* PREDIV1 selected as PLL clock entry */
+
+ /* Get PREDIV1 clock source and division factor */
+ prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+ prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+
+ if (prediv1source == 0U)
+ {
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
+ }
+ else
+ {/* PLL2 clock selected as PREDIV1 clock entry */
+
+ /* Get PREDIV2 division factor and PLL2 multiplication factor */
+ prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
+ pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U;
+ SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
+ }
+ }
+#endif /* STM32F105xC */
+ break;
+
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+
+ /* Compute HCLK clock frequency ----------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/**
+ * @brief Setup the external memory controller. Called in startup_stm32f1xx.s
+ * before jump to __main
+ * @param None
+ * @retval None
+ */
+#ifdef DATA_IN_ExtSRAM
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f1xx_xx.s/.c before jump to main.
+ * This function configures the external SRAM mounted on STM3210E-EVAL
+ * board (STM32 High density devices). This SRAM will be used as program
+ * data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+ __IO uint32_t tmpreg;
+ /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
+ required, then adjust the Register Addresses */
+
+ /* Enable FSMC clock */
+ RCC->AHBENR = 0x00000114U;
+
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
+
+ /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
+ RCC->APB2ENR = 0x000001E0U;
+
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
+
+ (void)(tmpreg);
+
+/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
+/*---------------- SRAM Address lines configuration -------------------------*/
+/*---------------- NOE and NWE configuration --------------------------------*/
+/*---------------- NE3 configuration ----------------------------------------*/
+/*---------------- NBL0, NBL1 configuration ---------------------------------*/
+
+ GPIOD->CRL = 0x44BB44BBU;
+ GPIOD->CRH = 0xBBBBBBBBU;
+
+ GPIOE->CRL = 0xB44444BBU;
+ GPIOE->CRH = 0xBBBBBBBBU;
+
+ GPIOF->CRL = 0x44BBBBBBU;
+ GPIOF->CRH = 0xBBBB4444U;
+
+ GPIOG->CRL = 0x44BBBBBBU;
+ GPIOG->CRH = 0x444B4B44U;
+
+/*---------------- FSMC Configuration ---------------------------------------*/
+/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
+
+ FSMC_Bank1->BTCR[4U] = 0x00001091U;
+ FSMC_Bank1->BTCR[5U] = 0x00110212U;
+}
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+#!/bin/sh
+set -e
+for a in $(find . -name Makefile -o -name '*.c' -o -name '*.h' -o -name '*.s' -o -name '*.ld') ; do
+ echo $a
+ recode utf-8/crlf..utf-8 $a
+done
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>\r
+<Project>\r
+<ProjectName>/aux/misc/stm/testusb/\testusb</ProjectName>\r
+<ProjectNature>C</ProjectNature> \r
+<CMSIS>/aux/misc/stm/F1-package/Drivers/CMSIS</CMSIS>\r
+<HAL_Driver>/aux/misc/stm/F1-package/Drivers/CMSIS</HAL_Driver>\r
+<Toolchain>Makefile</Toolchain>\r
+<Version>0</Version>\r
+\r
+<filestoremove>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c</name>\r
+ </file>\r
+</filestoremove>\r
+\r
+<inctoremove>\r
+ <Aincludes>\r
+ <include></include>\r
+ </Aincludes>\r
+ <Cincludes>\r
+ </Cincludes>\r
+</inctoremove>\r
+\r
+<configs>\r
+ <config>\r
+ <name>testusb</name> \r
+ <device>STM32F103C8Tx</device> \r
+ <heapSize>0x200</heapSize>\r
+ <stackSize>0x400</stackSize>\r
+ \r
+ <board>custom</board>\r
+ \r
+ <usedDebug>true</usedDebug>\r
+ <debugprobe>swd</debugprobe>\r
+ <optimization></optimization>\r
+ <icfloc>0</icfloc>\r
+ <Adefines>\r
+ <define></define>\r
+ </Adefines> \r
+\r
+ <UsedFreeRTOS></UsedFreeRTOS>\r
+ <Aincludes>\r
+\r
+\r
+ <include></include>\r
+ </Aincludes>\r
+ <Cdefines>\r
+ <define>USE_FULL_LL_DRIVER</define>\r
+ </Cdefines>\r
+ <definestoremove>\r
+ <Adefines>\r
+ <define></define>\r
+ </Adefines>\r
+ <Cdefines>\r
+ <define>MBEDTLS_CONFIG_FILE="mbedtls_config.h"</define>\r
+ <define>_TIMEVAL_DEFINED</define>\r
+ <define>_SYS_TIME_H_</define>\r
+ </Cdefines> \r
+ </definestoremove>\r
+ \r
+ <Cincludes>\r
+ <include>Inc</include>\r
+ <include>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc</include>\r
+ <include>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy</include>\r
+ <include>/aux/misc/stm/F1-package/Drivers/CMSIS/Device/ST/STM32F1xx/Include</include>\r
+ <include>/aux/misc/stm/F1-package/Drivers/CMSIS/Include</include>\r
+\r
+ </Cincludes>\r
+ </config>\r
+ </configs> \r
+\r
+ <underRoot>false</underRoot>\r
+\r
+ <group>\r
+ <name>Drivers</name> \r
+ <group>\r
+ <name>STM32F1xx_HAL_Driver</name>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c</name>\r
+ </file>\r
+ </group>\r
+ <group>\r
+ <name>CMSIS</name>\r
+ <file>\r
+ <name>/Src/system_stm32f1xx.c</name>\r
+ </file>\r
+ </group>\r
+ </group> \r
+ <group>\r
+ <name>Application</name>\r
+ <group>\r
+ <name>User</name> \r
+ <file>\r
+ <name>Src/main.c</name>\r
+ </file>\r
+\r
+ <file>\r
+ <name>Src/stm32f1xx_it.c</name>\r
+ </file>\r
+\r
+ <file>\r
+ <name>Src/stm32f1xx_hal_msp.c</name>\r
+ </file>\r
+\r
+\r
+\r
+ <group>\r
+ <name>Src</name>\r
+ <group>\r
+ <name>main.c</name>\r
+ <file>\r
+ <name>Src/main.c</name>\r
+ </file>\r
+ </group>\r
+ </group>\r
+ <group>\r
+ <name>Src</name>\r
+ <group>\r
+ <name>stm32f1xx_it.c</name>\r
+ <file>\r
+ <name>Src/stm32f1xx_it.c</name>\r
+ </file>\r
+ </group>\r
+ </group>\r
+ <group>\r
+ <name>Src</name>\r
+ <group>\r
+ <name>stm32f1xx_hal_msp.c</name>\r
+ <file>\r
+ <name>Src/stm32f1xx_hal_msp.c</name>\r
+ </file>\r
+ </group>\r
+ </group>\r
+\r
+</group> \r
+ </group>\r
+</Project>\r
--- /dev/null
+/**
+ *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+ * @file startup_stm32f103xb.s
+ * @author MCD Application Team
+ * @version V4.2.0
+ * @date 31-March-2017
+ * @brief STM32F103xB Devices vector table for Atollic toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN1_TX_IRQHandler
+ .word USB_LP_CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_IRQHandler
+ .word TIM1_UP_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTC_Alarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x108. This is for boot in RAM mode for
+ STM32F10x Medium Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN1_TX_IRQHandler
+ .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN1_RX0_IRQHandler
+ .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_IRQHandler
+ .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_IRQHandler
+ .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTC_Alarm_IRQHandler
+ .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null
+#MicroXplorer Configuration settings - do not modify
+File.Version=6
+I2C1.I2C_Mode=I2C_Standard
+I2C1.IPParameters=I2C_Mode
+I2C2.I2C_Mode=I2C_Fast
+I2C2.IPParameters=I2C_Mode
+KeepUserPlacement=false
+Mcu.Family=STM32F1
+Mcu.IP0=I2C1
+Mcu.IP1=I2C2
+Mcu.IP2=NVIC
+Mcu.IP3=RCC
+Mcu.IP4=SYS
+Mcu.IP5=USB
+Mcu.IPNb=6
+Mcu.Name=STM32F103C(8-B)Tx
+Mcu.Package=LQFP48
+Mcu.Pin0=PC13-TAMPER-RTC
+Mcu.Pin1=PC14-OSC32_IN
+Mcu.Pin10=PA14
+Mcu.Pin11=PB5
+Mcu.Pin12=PB6
+Mcu.Pin13=PB7
+Mcu.Pin14=VP_SYS_VS_Systick
+Mcu.Pin2=PC15-OSC32_OUT
+Mcu.Pin3=PD0-OSC_IN
+Mcu.Pin4=PD1-OSC_OUT
+Mcu.Pin5=PB10
+Mcu.Pin6=PB11
+Mcu.Pin7=PA11
+Mcu.Pin8=PA12
+Mcu.Pin9=PA13
+Mcu.PinsNb=15
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32F103C8Tx
+MxCube.Version=4.25.1
+MxDb.Version=DB.4.0.251
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
+PA11.Mode=Device
+PA11.Signal=USB_DM
+PA12.Mode=Device
+PA12.Signal=USB_DP
+PA13.Mode=Serial_Wire
+PA13.Signal=SYS_JTMS-SWDIO
+PA14.Mode=Serial_Wire
+PA14.Signal=SYS_JTCK-SWCLK
+PB10.Mode=I2C
+PB10.Signal=I2C2_SCL
+PB11.Mode=I2C
+PB11.Signal=I2C2_SDA
+PB5.GPIOParameters=GPIO_Label
+PB5.GPIO_Label=BMP_DONE
+PB5.Locked=true
+PB5.Signal=GPIO_Input
+PB6.Mode=I2C
+PB6.Signal=I2C1_SCL
+PB7.Mode=I2C
+PB7.Signal=I2C1_SDA
+PC13-TAMPER-RTC.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
+PC13-TAMPER-RTC.GPIO_Label=LED
+PC13-TAMPER-RTC.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_PP
+PC13-TAMPER-RTC.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
+PC13-TAMPER-RTC.Locked=true
+PC13-TAMPER-RTC.PinState=GPIO_PIN_RESET
+PC13-TAMPER-RTC.Signal=GPIO_Output
+PC14-OSC32_IN.Mode=LSE-External-Oscillator
+PC14-OSC32_IN.Signal=RCC_OSC32_IN
+PC15-OSC32_OUT.Mode=LSE-External-Oscillator
+PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
+PCC.Checker=false
+PCC.Line=STM32F103
+PCC.MCU=STM32F103C(8-B)Tx
+PCC.PartNumber=STM32F103C8Tx
+PCC.Seq0=0
+PCC.Series=STM32F1
+PCC.Temperature=25
+PCC.Vdd=3.3
+PD0-OSC_IN.Mode=HSE-External-Oscillator
+PD0-OSC_IN.Signal=RCC_OSC_IN
+PD1-OSC_OUT.Mode=HSE-External-Oscillator
+PD1-OSC_OUT.Signal=RCC_OSC_OUT
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=3
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=/aux/misc/stm/F1-package
+ProjectManager.DefaultFWLocation=false
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32F103C8Tx
+ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.6.1
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=2
+ProjectManager.MainLocation=Src
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=testusb.ioc
+ProjectManager.ProjectName=testusb
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=Makefile
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-SystemClock_Config-RCC-false-LL-false,3-MX_I2C1_Init-I2C1-false-LL-true,4-MX_I2C2_Init-I2C2-false-LL-true,5-MX_USB_PCD_Init-USB-false-HAL-true
+RCC.ADCFreqValue=36000000
+RCC.AHBFreq_Value=72000000
+RCC.APB1CLKDivider=RCC_HCLK_DIV2
+RCC.APB1Freq_Value=36000000
+RCC.APB1TimFreq_Value=72000000
+RCC.APB2Freq_Value=72000000
+RCC.APB2TimFreq_Value=72000000
+RCC.FCLKCortexFreq_Value=72000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=72000000
+RCC.IPParameters=ADCFreqValue,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLMUL,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value,USBPrescaler,VCOOutput2Freq_Value
+RCC.MCOFreq_Value=72000000
+RCC.PLLCLKFreq_Value=72000000
+RCC.PLLMCOFreq_Value=36000000
+RCC.PLLMUL=RCC_PLL_MUL9
+RCC.SYSCLKFreq_VALUE=72000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.TimSysFreq_Value=72000000
+RCC.USBFreq_Value=48000000
+RCC.USBPrescaler=RCC_USBCLKSOURCE_PLL_DIV1_5
+RCC.VCOOutput2Freq_Value=8000000
+USB.IPParameters=ep0_mps
+USB.ep0_mps=DEP0CTL_MPS_64
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=testusb
projects / home-hw.git / commitdiff