-/**\r
- ******************************************************************************\r
- * @file stm32_assert.h\r
- * @brief STM32 assert file.\r
- ******************************************************************************\r
- ** This notice applies to any and all portions of this file\r
- * that are not between comment pairs USER CODE BEGIN and\r
- * USER CODE END. Other portions of this file, whether \r
- * inserted by the user or by software development tools\r
- * are owned by their respective copyright owners.\r
- *\r
- * COPYRIGHT(c) 2018 STMicroelectronics\r
- *\r
- * Redistribution and use in source and binary forms, with or without modification,\r
- * are permitted provided that the following conditions are met:\r
- * 1. Redistributions of source code must retain the above copyright notice,\r
- * this list of conditions and the following disclaimer.\r
- * 2. Redistributions in binary form must reproduce the above copyright notice,\r
- * this list of conditions and the following disclaimer in the documentation\r
- * and/or other materials provided with the distribution.\r
- * 3. Neither the name of STMicroelectronics nor the names of its contributors\r
- * may be used to endorse or promote products derived from this software\r
- * without specific prior written permission.\r
- *\r
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"\r
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE\r
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE\r
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE\r
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL\r
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR\r
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER\r
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,\r
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE\r
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\r
- *\r
- ******************************************************************************\r
- */\r
-\r
-/* Define to prevent recursive inclusion -------------------------------------*/\r
-#ifndef __STM32_ASSERT_H\r
-#define __STM32_ASSERT_H\r
-\r
-#ifdef __cplusplus\r
- extern "C" {\r
-#endif\r
-\r
-/* Exported types ------------------------------------------------------------*/\r
-/* Exported constants --------------------------------------------------------*/\r
-/* Includes ------------------------------------------------------------------*/\r
-/* Exported macro ------------------------------------------------------------*/\r
-#ifdef USE_FULL_ASSERT\r
-/**\r
- * @brief The assert_param macro is used for function's parameters check.\r
- * @param expr: If expr is false, it calls assert_failed function\r
- * which reports the name of the source file and the source\r
- * line number of the call that failed.\r
- * If expr is true, it returns no value.\r
- * @retval None\r
- */\r
- #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))\r
-/* Exported functions ------------------------------------------------------- */\r
- void assert_failed(uint8_t* file, uint32_t line);\r
-#else\r
- #define assert_param(expr) ((void)0U)\r
-#endif /* USE_FULL_ASSERT */\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-\r
-#endif /* __STM32_ASSERT_H */\r
-\r
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/\r
+/**
+ ******************************************************************************
+ * @file stm32_assert.h
+ * @brief STM32 assert file.
+ ******************************************************************************
+ ** This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * COPYRIGHT(c) 2018 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_ASSERT_H
+#define __STM32_ASSERT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Includes ------------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32_ASSERT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-/**\r
- ******************************************************************************\r
- * @file stm32f0xx_hal_conf.h\r
- * @brief HAL configuration file.\r
- ******************************************************************************\r
- * @attention\r
- *\r
- * <h2><center>© COPYRIGHT(c) 2018 STMicroelectronics</center></h2>\r
- *\r
- * Redistribution and use in source and binary forms, with or without modification,\r
- * are permitted provided that the following conditions are met:\r
- * 1. Redistributions of source code must retain the above copyright notice,\r
- * this list of conditions and the following disclaimer.\r
- * 2. Redistributions in binary form must reproduce the above copyright notice,\r
- * this list of conditions and the following disclaimer in the documentation\r
- * and/or other materials provided with the distribution.\r
- * 3. Neither the name of STMicroelectronics nor the names of its contributors\r
- * may be used to endorse or promote products derived from this software\r
- * without specific prior written permission.\r
- *\r
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"\r
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE\r
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE\r
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE\r
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL\r
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR\r
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER\r
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,\r
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE\r
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\r
- *\r
- ******************************************************************************\r
- */ \r
-\r
-/* Define to prevent recursive inclusion -------------------------------------*/\r
-#ifndef __STM32F0xx_HAL_CONF_H\r
-#define __STM32F0xx_HAL_CONF_H\r
-\r
-#ifdef __cplusplus\r
- extern "C" {\r
-#endif\r
-\r
-#include "main.h"\r
-/* Exported types ------------------------------------------------------------*/\r
-/* Exported constants --------------------------------------------------------*/\r
-\r
-/* ########################## Module Selection ############################## */\r
-/**\r
- * @brief This is the list of modules to be used in the HAL driver \r
- */\r
-#define HAL_MODULE_ENABLED \r
-/*#define HAL_ADC_MODULE_ENABLED */\r
-/*#define HAL_CRYP_MODULE_ENABLED */\r
-/*#define HAL_CAN_MODULE_ENABLED */\r
-/*#define HAL_CEC_MODULE_ENABLED */\r
-/*#define HAL_COMP_MODULE_ENABLED */\r
-/*#define HAL_CRC_MODULE_ENABLED */\r
-/*#define HAL_CRYP_MODULE_ENABLED */\r
-/*#define HAL_TSC_MODULE_ENABLED */\r
-/*#define HAL_DAC_MODULE_ENABLED */\r
-/*#define HAL_I2S_MODULE_ENABLED */\r
-/*#define HAL_IWDG_MODULE_ENABLED */\r
-/*#define HAL_LCD_MODULE_ENABLED */\r
-/*#define HAL_LPTIM_MODULE_ENABLED */\r
-/*#define HAL_RNG_MODULE_ENABLED */\r
-/*#define HAL_RTC_MODULE_ENABLED */\r
-/*#define HAL_SPI_MODULE_ENABLED */\r
-/*#define HAL_TIM_MODULE_ENABLED */\r
-/*#define HAL_UART_MODULE_ENABLED */\r
-/*#define HAL_USART_MODULE_ENABLED */\r
-/*#define HAL_IRDA_MODULE_ENABLED */\r
-/*#define HAL_SMARTCARD_MODULE_ENABLED */\r
-/*#define HAL_SMBUS_MODULE_ENABLED */\r
-/*#define HAL_WWDG_MODULE_ENABLED */\r
-/*#define HAL_PCD_MODULE_ENABLED */\r
-#define HAL_CORTEX_MODULE_ENABLED\r
-#define HAL_DMA_MODULE_ENABLED\r
-#define HAL_FLASH_MODULE_ENABLED\r
-#define HAL_GPIO_MODULE_ENABLED\r
-#define HAL_PWR_MODULE_ENABLED\r
-#define HAL_RCC_MODULE_ENABLED\r
-#define HAL_I2C_MODULE_ENABLED\r
-\r
-/* ########################## HSE/HSI Values adaptation ##################### */\r
-/**\r
- * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.\r
- * This value is used by the RCC HAL module to compute the system frequency\r
- * (when HSE is used as system clock source, directly or through the PLL). \r
- */\r
-#if !defined (HSE_VALUE) \r
- #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */\r
-#endif /* HSE_VALUE */\r
-\r
-/**\r
- * @brief In the following line adjust the External High Speed oscillator (HSE) Startup \r
- * Timeout value \r
- */\r
-#if !defined (HSE_STARTUP_TIMEOUT)\r
- #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */\r
-#endif /* HSE_STARTUP_TIMEOUT */\r
-\r
-/**\r
- * @brief Internal High Speed oscillator (HSI) value.\r
- * This value is used by the RCC HAL module to compute the system frequency\r
- * (when HSI is used as system clock source, directly or through the PLL). \r
- */\r
-#if !defined (HSI_VALUE)\r
- #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/\r
-#endif /* HSI_VALUE */\r
-\r
-/**\r
- * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup \r
- * Timeout value \r
- */\r
-#if !defined (HSI_STARTUP_TIMEOUT) \r
- #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */\r
-#endif /* HSI_STARTUP_TIMEOUT */ \r
-\r
-/**\r
- * @brief Internal High Speed oscillator for ADC (HSI14) value.\r
- */\r
-#if !defined (HSI14_VALUE) \r
-#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz.\r
- The real value may vary depending on the variations\r
- in voltage and temperature. */\r
-#endif /* HSI14_VALUE */\r
-\r
-/**\r
- * @brief Internal High Speed oscillator for USB (HSI48) value.\r
- */\r
-#if !defined (HSI48_VALUE) \r
-#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz.\r
- The real value may vary depending on the variations\r
- in voltage and temperature. */\r
-#endif /* HSI48_VALUE */\r
-\r
-/**\r
- * @brief Internal Low Speed oscillator (LSI) value.\r
- */\r
-#if !defined (LSI_VALUE) \r
- #define LSI_VALUE ((uint32_t)40000) \r
-#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz\r
- The real value may vary depending on the variations\r
- in voltage and temperature. */\r
-/**\r
- * @brief External Low Speed oscillator (LSI) value.\r
- */\r
-#if !defined (LSE_VALUE)\r
- #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */\r
-#endif /* LSE_VALUE */ \r
-\r
-#if !defined (LSE_STARTUP_TIMEOUT)\r
- #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */\r
-#endif /* LSE_STARTUP_TIMEOUT */\r
-\r
-/* Tip: To avoid modifying this file each time you need to use different HSE,\r
- === you can define the HSE value in your toolchain compiler preprocessor. */\r
-\r
-/* ########################### System Configuration ######################### */\r
-/**\r
- * @brief This is the HAL system configuration section\r
- */ \r
-#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ \r
-#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */ \r
- /* Warning: Must be set to higher priority for HAL_Delay() */\r
- /* and HAL_GetTick() usage under interrupt context */\r
-#define USE_RTOS 0 \r
-#define PREFETCH_ENABLE 1 \r
-#define INSTRUCTION_CACHE_ENABLE 0\r
-#define DATA_CACHE_ENABLE 0\r
-/* ########################## Assert Selection ############################## */\r
-/**\r
- * @brief Uncomment the line below to expanse the "assert_param" macro in the \r
- * HAL drivers code\r
- */\r
-/* #define USE_FULL_ASSERT 1U */\r
-\r
-/* ################## SPI peripheral configuration ########################## */\r
-\r
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver\r
-* Activated: CRC code is present inside driver\r
-* Deactivated: CRC code cleaned from driver\r
-*/\r
-\r
-#define USE_SPI_CRC 0U\r
-\r
-/* Includes ------------------------------------------------------------------*/\r
-/**\r
- * @brief Include module's header file \r
- */\r
-\r
-#ifdef HAL_RCC_MODULE_ENABLED\r
- #include "stm32f0xx_hal_rcc.h"\r
-#endif /* HAL_RCC_MODULE_ENABLED */\r
-\r
-#ifdef HAL_GPIO_MODULE_ENABLED\r
- #include "stm32f0xx_hal_gpio.h"\r
-#endif /* HAL_GPIO_MODULE_ENABLED */\r
-\r
-#ifdef HAL_DMA_MODULE_ENABLED\r
- #include "stm32f0xx_hal_dma.h"\r
-#endif /* HAL_DMA_MODULE_ENABLED */\r
-\r
-#ifdef HAL_CORTEX_MODULE_ENABLED\r
- #include "stm32f0xx_hal_cortex.h"\r
-#endif /* HAL_CORTEX_MODULE_ENABLED */\r
-\r
-#ifdef HAL_ADC_MODULE_ENABLED\r
- #include "stm32f0xx_hal_adc.h"\r
-#endif /* HAL_ADC_MODULE_ENABLED */\r
-\r
-#ifdef HAL_CAN_MODULE_ENABLED\r
- #include "stm32f0xx_hal_can.h"\r
-#endif /* HAL_CAN_MODULE_ENABLED */\r
-\r
-#ifdef HAL_CEC_MODULE_ENABLED\r
- #include "stm32f0xx_hal_cec.h"\r
-#endif /* HAL_CEC_MODULE_ENABLED */\r
-\r
-#ifdef HAL_COMP_MODULE_ENABLED\r
- #include "stm32f0xx_hal_comp.h"\r
-#endif /* HAL_COMP_MODULE_ENABLED */\r
-\r
-#ifdef HAL_CRC_MODULE_ENABLED\r
- #include "stm32f0xx_hal_crc.h"\r
-#endif /* HAL_CRC_MODULE_ENABLED */\r
-\r
-#ifdef HAL_DAC_MODULE_ENABLED\r
- #include "stm32f0xx_hal_dac.h"\r
-#endif /* HAL_DAC_MODULE_ENABLED */\r
-\r
-#ifdef HAL_FLASH_MODULE_ENABLED\r
- #include "stm32f0xx_hal_flash.h"\r
-#endif /* HAL_FLASH_MODULE_ENABLED */\r
-\r
-#ifdef HAL_I2C_MODULE_ENABLED\r
- #include "stm32f0xx_hal_i2c.h"\r
-#endif /* HAL_I2C_MODULE_ENABLED */\r
-\r
-#ifdef HAL_I2S_MODULE_ENABLED\r
- #include "stm32f0xx_hal_i2s.h"\r
-#endif /* HAL_I2S_MODULE_ENABLED */\r
-\r
-#ifdef HAL_IRDA_MODULE_ENABLED\r
- #include "stm32f0xx_hal_irda.h"\r
-#endif /* HAL_IRDA_MODULE_ENABLED */\r
-\r
-#ifdef HAL_IWDG_MODULE_ENABLED\r
- #include "stm32f0xx_hal_iwdg.h"\r
-#endif /* HAL_IWDG_MODULE_ENABLED */\r
-\r
-#ifdef HAL_PCD_MODULE_ENABLED\r
- #include "stm32f0xx_hal_pcd.h"\r
-#endif /* HAL_PCD_MODULE_ENABLED */\r
-\r
-#ifdef HAL_PWR_MODULE_ENABLED\r
- #include "stm32f0xx_hal_pwr.h"\r
-#endif /* HAL_PWR_MODULE_ENABLED */\r
-\r
-#ifdef HAL_RTC_MODULE_ENABLED\r
- #include "stm32f0xx_hal_rtc.h"\r
-#endif /* HAL_RTC_MODULE_ENABLED */\r
-\r
-#ifdef HAL_SMARTCARD_MODULE_ENABLED\r
- #include "stm32f0xx_hal_smartcard.h"\r
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */\r
-\r
-#ifdef HAL_SMBUS_MODULE_ENABLED\r
- #include "stm32f0xx_hal_smbus.h"\r
-#endif /* HAL_SMBUS_MODULE_ENABLED */\r
-\r
-#ifdef HAL_SPI_MODULE_ENABLED\r
- #include "stm32f0xx_hal_spi.h"\r
-#endif /* HAL_SPI_MODULE_ENABLED */\r
-\r
-#ifdef HAL_TIM_MODULE_ENABLED\r
- #include "stm32f0xx_hal_tim.h"\r
-#endif /* HAL_TIM_MODULE_ENABLED */\r
-\r
-#ifdef HAL_TSC_MODULE_ENABLED\r
- #include "stm32f0xx_hal_tsc.h"\r
-#endif /* HAL_TSC_MODULE_ENABLED */\r
-\r
-#ifdef HAL_UART_MODULE_ENABLED\r
- #include "stm32f0xx_hal_uart.h"\r
-#endif /* HAL_UART_MODULE_ENABLED */\r
-\r
-#ifdef HAL_USART_MODULE_ENABLED\r
- #include "stm32f0xx_hal_usart.h"\r
-#endif /* HAL_USART_MODULE_ENABLED */\r
-\r
-#ifdef HAL_WWDG_MODULE_ENABLED\r
- #include "stm32f0xx_hal_wwdg.h"\r
-#endif /* HAL_WWDG_MODULE_ENABLED */\r
-\r
-/* Exported macro ------------------------------------------------------------*/\r
-#ifdef USE_FULL_ASSERT\r
-/**\r
- * @brief The assert_param macro is used for function's parameters check.\r
- * @param expr: If expr is false, it calls assert_failed function\r
- * which reports the name of the source file and the source\r
- * line number of the call that failed. \r
- * If expr is true, it returns no value.\r
- * @retval None\r
- */\r
- #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))\r
-/* Exported functions ------------------------------------------------------- */\r
- void assert_failed(uint8_t* file, uint32_t line);\r
-#else\r
- #define assert_param(expr) ((void)0U)\r
-#endif /* USE_FULL_ASSERT */ \r
- \r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-\r
-#endif /* __STM32F0xx_HAL_CONF_H */\r
-\r
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/\r
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_conf.h
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2018 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CONF_H
+#define __STM32F0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "main.h"
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+/*#define HAL_ADC_MODULE_ENABLED */
+/*#define HAL_CRYP_MODULE_ENABLED */
+/*#define HAL_CAN_MODULE_ENABLED */
+/*#define HAL_CEC_MODULE_ENABLED */
+/*#define HAL_COMP_MODULE_ENABLED */
+/*#define HAL_CRC_MODULE_ENABLED */
+/*#define HAL_CRYP_MODULE_ENABLED */
+/*#define HAL_TSC_MODULE_ENABLED */
+/*#define HAL_DAC_MODULE_ENABLED */
+/*#define HAL_I2S_MODULE_ENABLED */
+/*#define HAL_IWDG_MODULE_ENABLED */
+/*#define HAL_LCD_MODULE_ENABLED */
+/*#define HAL_LPTIM_MODULE_ENABLED */
+/*#define HAL_RNG_MODULE_ENABLED */
+/*#define HAL_RTC_MODULE_ENABLED */
+/*#define HAL_SPI_MODULE_ENABLED */
+/*#define HAL_TIM_MODULE_ENABLED */
+/*#define HAL_UART_MODULE_ENABLED */
+/*#define HAL_USART_MODULE_ENABLED */
+/*#define HAL_IRDA_MODULE_ENABLED */
+/*#define HAL_SMARTCARD_MODULE_ENABLED */
+/*#define HAL_SMBUS_MODULE_ENABLED */
+/*#define HAL_WWDG_MODULE_ENABLED */
+/*#define HAL_PCD_MODULE_ENABLED */
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ * Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+ * Timeout value
+ */
+#if !defined (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator for ADC (HSI14) value.
+ */
+#if !defined (HSI14_VALUE)
+#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#endif /* HSI14_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator for USB (HSI48) value.
+ */
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#endif /* HSI48_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)40000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */
+ /* Warning: Must be set to higher priority for HAL_Delay() */
+ /* and HAL_GetTick() usage under interrupt context */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 0
+#define DATA_CACHE_ENABLE 0
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC 0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f0xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f0xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f0xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f0xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f0xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f0xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-/**\r
- ******************************************************************************\r
- * @file stm32f0xx_it.h\r
- * @brief This file contains the headers of the interrupt handlers.\r
- ******************************************************************************\r
- *\r
- * COPYRIGHT(c) 2018 STMicroelectronics\r
- *\r
- * Redistribution and use in source and binary forms, with or without modification,\r
- * are permitted provided that the following conditions are met:\r
- * 1. Redistributions of source code must retain the above copyright notice,\r
- * this list of conditions and the following disclaimer.\r
- * 2. Redistributions in binary form must reproduce the above copyright notice,\r
- * this list of conditions and the following disclaimer in the documentation\r
- * and/or other materials provided with the distribution.\r
- * 3. Neither the name of STMicroelectronics nor the names of its contributors\r
- * may be used to endorse or promote products derived from this software\r
- * without specific prior written permission.\r
- *\r
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"\r
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE\r
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE\r
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE\r
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL\r
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR\r
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER\r
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,\r
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE\r
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\r
- *\r
- ******************************************************************************\r
- */\r
-\r
-/* Define to prevent recursive inclusion -------------------------------------*/\r
-#ifndef __STM32F0xx_IT_H\r
-#define __STM32F0xx_IT_H\r
-\r
-#ifdef __cplusplus\r
- extern "C" {\r
-#endif \r
-\r
-/* Includes ------------------------------------------------------------------*/\r
-#include "stm32f0xx_ll_system.h"\r
-#include "stm32f0xx_ll_gpio.h"\r
-#include "stm32f0xx_ll_exti.h"\r
-#include "main.h"\r
-/* Exported types ------------------------------------------------------------*/\r
-/* Exported constants --------------------------------------------------------*/\r
-/* Exported macro ------------------------------------------------------------*/\r
-/* Exported functions ------------------------------------------------------- */\r
-\r
-void SysTick_Handler(void);\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-\r
-#endif /* __STM32F0xx_IT_H */\r
-\r
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/\r
+/**
+ ******************************************************************************
+ * @file stm32f0xx_it.h
+ * @brief This file contains the headers of the interrupt handlers.
+ ******************************************************************************
+ *
+ * COPYRIGHT(c) 2018 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_IT_H
+#define __STM32F0xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_ll_system.h"
+#include "stm32f0xx_ll_gpio.h"
+#include "stm32f0xx_ll_exti.h"
+#include "main.h"
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
projects / home-hw.git / commitdiff