[PreviousGenFiles]\r
HeaderPath=/aux/misc/stm/testusb/Inc\r
-HeaderFiles=stm32f1xx_it.h;stm32_assert.h;stm32f1xx_hal_conf.h;main.h;\r
+HeaderFiles=stm32f1xx_it.h;stm32_assert.h;stm32f1xx_hal_conf.h;main.h;usb_device.h;usbd_conf.h;usbd_desc.h;usbd_dfu_if.h;\r
SourcePath=/aux/misc/stm/testusb/Src\r
-SourceFiles=stm32f1xx_it.c;stm32f1xx_hal_msp.c;main.c;\r
+SourceFiles=stm32f1xx_it.c;stm32f1xx_hal_msp.c;main.c;usb_device.c;usbd_conf.c;usbd_desc.c;usbd_dfu_if.c;\r
\r
[PreviousLibFiles]\r
-LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_i2c.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cmSimd.h;\r
+LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_i2c.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_system.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_utils.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h;Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Inc/usbd_dfu.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Src/usbd_dfu.c;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cmSimd.h;\r
\r
[PreviousUsedMakefileFiles]\r
-SourceFiles=Src/main.c;Src/stm32f1xx_it.c;Src/stm32f1xx_hal_msp.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;/Src/system_stm32f1xx.c;/aux/misc/stm/F1-package/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;null;\r
-HeaderPath=/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;/aux/misc/stm/F1-package/Drivers/CMSIS/Device/ST/STM32F1xx/Include;/aux/misc/stm/F1-package/Drivers/CMSIS/Include;Inc;\r
+SourceFiles=Src/main.c;Src/usb_device.c;Src/usbd_conf.c;Src/usbd_desc.c;Src/usbd_dfu_if.c;Src/stm32f1xx_it.c;Src/stm32f1xx_hal_msp.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Src/usbd_dfu.c;/Src/system_stm32f1xx.c;/aux/misc/stm/F1-package/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;null;/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Src/usbd_dfu.c;\r
+HeaderPath=/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc;/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Inc;/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Inc;/aux/misc/stm/F1-package/Drivers/CMSIS/Device/ST/STM32F1xx/Include;/aux/misc/stm/F1-package/Drivers/CMSIS/Include;Inc;\r
CDefines=USE_FULL_LL_DRIVER;\r
\r
* @brief : Header for main.c file.
* This file contains the common defines of the application.
******************************************************************************
- ** This notice applies to any and all portions of this file
+ * This notice applies to any and all portions of this file
* that are not between comment pairs USER CODE BEGIN and
* USER CODE END. Other portions of this file, whether
* inserted by the user or by software development tools
* are owned by their respective copyright owners.
*
- * COPYRIGHT(c) 2018 STMicroelectronics
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
*
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
*
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
* @file stm32_assert.h
* @brief STM32 assert file.
******************************************************************************
- ** This notice applies to any and all portions of this file
+ * This notice applies to any and all portions of this file
* that are not between comment pairs USER CODE BEGIN and
* USER CODE END. Other portions of this file, whether
* inserted by the user or by software development tools
* are owned by their respective copyright owners.
*
- * COPYRIGHT(c) 2018 STMicroelectronics
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
*
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
*
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file : usb_device.h
+ * @version : v2.0_Cube
+ * @brief : Header for usb_device.c file.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_DEVICE__H__
+#define __USB_DEVICE__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+#include "stm32f1xx_hal.h"
+#include "usbd_def.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup USBD_OTG_DRIVER
+ * @{
+ */
+
+/** @defgroup USBD_DEVICE USBD_DEVICE
+ * @brief Device file for Usb otg low level driver.
+ * @{
+ */
+
+/** @defgroup USBD_DEVICE_Exported_Variables USBD_DEVICE_Exported_Variables
+ * @brief Public variables.
+ * @{
+ */
+
+/** USB device core handle. */
+extern USBD_HandleTypeDef hUsbDeviceFS;
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEVICE_Exported_FunctionsPrototype USBD_DEVICE_Exported_FunctionsPrototype
+ * @brief Declaration of public functions for Usb device.
+ * @{
+ */
+
+/** USB Device initialization function. */
+void MX_USB_DEVICE_Init(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_DEVICE__H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file : usbd_conf.h
+ * @version : v2.0_Cube
+ * @brief : Header for usbd_conf.c file.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CONF__H__
+#define __USBD_CONF__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "stm32f1xx.h"
+#include "stm32f1xx_hal.h"
+#include "usbd_def.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup USBD_OTG_DRIVER
+ * @{
+ */
+
+/** @defgroup USBD_CONF USBD_CONF
+ * @brief Configuration file for Usb otg low level driver.
+ * @{
+ */
+
+/** @defgroup USBD_CONF_Exported_Variables USBD_CONF_Exported_Variables
+ * @brief Public variables.
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Defines USBD_CONF_Exported_Defines
+ * @brief Defines for configuration of the Usb device.
+ * @{
+ */
+
+/*---------- -----------*/
+#define USBD_MAX_NUM_INTERFACES 1
+/*---------- -----------*/
+#define USBD_MAX_NUM_CONFIGURATION 1
+/*---------- -----------*/
+#define USBD_MAX_STR_DESC_SIZ 512
+/*---------- -----------*/
+#define USBD_SUPPORT_USER_STRING 1
+/*---------- -----------*/
+#define USBD_DEBUG_LEVEL 0
+/*---------- -----------*/
+#define USBD_SELF_POWERED 1
+/*---------- -----------*/
+#define USBD_DFU_MAX_ITF_NUM 1
+/*---------- -----------*/
+#define USBD_DFU_XFER_SIZE 1024
+/*---------- -----------*/
+#define USBD_DFU_APP_DEFAULT_ADD 0x08000000
+
+/****************************************/
+/* #define for FS and HS identification */
+#define DEVICE_FS 0
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Macros USBD_CONF_Exported_Macros
+ * @brief Aliases.
+ * @{
+ */
+
+/* Memory management macros */
+
+/** Alias for memory allocation. */
+#define USBD_malloc (uint32_t *)USBD_static_malloc
+
+/** Alias for memory release. */
+#define USBD_free USBD_static_free
+
+/** Alias for memory set. */
+#define USBD_memset /* Not used */
+
+/** Alias for memory copy. */
+#define USBD_memcpy /* Not used */
+
+/** Alias for delay. */
+#define USBD_Delay HAL_Delay
+
+/* For footprint reasons and since only one allocation is handled in the HID class
+ driver, the malloc/free is changed into a static allocation method */
+void *USBD_static_malloc(uint32_t size);
+void USBD_static_free(void *p);
+
+/* DEBUG macros */
+
+#if (USBD_DEBUG_LEVEL > 0)
+#define USBD_UsrLog(...) printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_UsrLog(...)
+#endif
+
+#if (USBD_DEBUG_LEVEL > 1)
+
+#define USBD_ErrLog(...) printf("ERROR: ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_ErrLog(...)
+#endif
+
+#if (USBD_DEBUG_LEVEL > 2)
+#define USBD_DbgLog(...) printf("DEBUG : ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_DbgLog(...)
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Types USBD_CONF_Exported_Types
+ * @brief Types.
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_FunctionsPrototype USBD_CONF_Exported_FunctionsPrototype
+ * @brief Declaration of public functions for Usb device.
+ * @{
+ */
+
+/* Exported functions -------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CONF__H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file : usbd_desc.h
+ * @version : v2.0_Cube
+ * @brief : Header for usbd_desc.c file.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DESC__H__
+#define __USBD_DESC__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_DESC USBD_DESC
+ * @brief Usb device descriptors module.
+ * @{
+ */
+
+/** @defgroup USBD_DESC_Exported_Defines USBD_DESC_Exported_Defines
+ * @brief Defines.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_DEFINES */
+
+/* USER CODE END EXPORTED_DEFINES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_TypesDefinitions USBD_DESC_Exported_TypesDefinitions
+ * @brief Types.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_TYPES */
+
+/* USER CODE END EXPORTED_TYPES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_Macros USBD_DESC_Exported_Macros
+ * @brief Aliases.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_MACRO */
+
+/* USER CODE END EXPORTED_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_Variables USBD_DESC_Exported_Variables
+ * @brief Public variables.
+ * @{
+ */
+
+/** Descriptor for the Usb device. */
+extern USBD_DescriptorsTypeDef FS_Desc;
+
+/* USER CODE BEGIN EXPORTED_VARIABLES */
+
+/* USER CODE END EXPORTED_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_FunctionsPrototype USBD_DESC_Exported_FunctionsPrototype
+ * @brief Public functions declaration.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_FUNCTIONS */
+
+/* USER CODE END EXPORTED_FUNCTIONS */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DESC__H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file : usbd_dfu_if.h
+ * @brief : Header for usbd_dfu_if.c file.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DFU_IF_H__
+#define __USBD_DFU_IF_H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_dfu.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @brief For Usb device.
+ * @{
+ */
+
+/** @defgroup USBD_MEDIA USBD_MEDIA
+ * @brief Header file for the usbd_dfu_if.c file.
+ * @{
+ */
+
+/** @defgroup USBD_MEDIA_Exported_Defines USBD_MEDIA_Exported_Defines
+ * @brief Defines.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_DEFINES */
+
+/* USER CODE END EXPORTED_DEFINES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_MEDIA_Exported_Types USBD_MEDIA_Exported_Types
+ * @brief Types.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_TYPES */
+
+/* USER CODE END EXPORTED_TYPES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_MEDIA_Exported_Macros USBD_MEDIA_Exported_Macros
+ * @brief Aliases.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_MACRO */
+
+/* USER CODE END EXPORTED_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_MEDIA_Exported_Variables USBD_MEDIA_Exported_Variables
+ * @brief Public variables.
+ * @{
+ */
+
+/** MEDIA Interface callback. */
+extern USBD_DFU_MediaTypeDef USBD_DFU_fops_FS;
+
+/* USER CODE BEGIN EXPORTED_VARIABLES */
+
+/* USER CODE END EXPORTED_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_MEDIA_Exported_FunctionsPrototype USBD_MEDIA_Exported_FunctionsPrototype
+ * @brief Public functions declaration.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_FUNCTIONS */
+
+/* USER CODE END EXPORTED_FUNCTIONS */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DFU_IF_H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
##########################################################################################################################
-# File automatically-generated by tool: [projectgenerator] version: [2.27.0] date: [Fri Jun 22 20:56:34 CEST 2018]
+# File automatically-generated by tool: [projectgenerator] version: [2.27.0] date: [Fri Jun 22 21:02:51 CEST 2018]
##########################################################################################################################
# ------------------------------------------------
/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c \
/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c \
/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c \
-/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c
+/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c \
+Src/usbd_conf.c \
+/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \
+Src/usbd_dfu_if.c \
+/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Src/usbd_dfu.c \
+/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c \
+/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \
+Src/usb_device.c \
+Src/usbd_desc.c
# ASM sources
ASM_SOURCES = \
-I/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc \
-I/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy \
-I/aux/misc/stm/F1-package/Drivers/CMSIS/Include \
--I/aux/misc/stm/F1-package/Drivers/CMSIS/Device/ST/STM32F1xx/Include
+-I/aux/misc/stm/F1-package/Drivers/CMSIS/Device/ST/STM32F1xx/Include \
+-I/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Inc \
+-I/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Inc
# compile gcc flags
* @file : main.c
* @brief : Main program body
******************************************************************************
- ** This notice applies to any and all portions of this file
+ * This notice applies to any and all portions of this file
* that are not between comment pairs USER CODE BEGIN and
* USER CODE END. Other portions of this file, whether
* inserted by the user or by software development tools
* are owned by their respective copyright owners.
*
- * COPYRIGHT(c) 2018 STMicroelectronics
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
*
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
*
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "stm32f1xx_hal.h"
+#include "usb_device.h"
/* USER CODE BEGIN Includes */
/* Private variables ---------------------------------------------------------*/
-PCD_HandleTypeDef hpcd_USB_FS;
-
/* USER CODE BEGIN PV */
/* Private variables ---------------------------------------------------------*/
+USBD_HandleTypeDef USBD_Device;
/* USER CODE END PV */
static void MX_GPIO_Init(void);
static void MX_I2C1_Init(void);
static void MX_I2C2_Init(void);
-static void MX_USB_PCD_Init(void);
/* USER CODE BEGIN PFP */
/* Private function prototypes -----------------------------------------------*/
MX_GPIO_Init();
MX_I2C1_Init();
MX_I2C2_Init();
- MX_USB_PCD_Init();
+ MX_USB_DEVICE_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
}
-/* USB init function */
-static void MX_USB_PCD_Init(void)
-{
-
- hpcd_USB_FS.Instance = USB;
- hpcd_USB_FS.Init.dev_endpoints = 8;
- hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
- hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_64;
- hpcd_USB_FS.Init.low_power_enable = DISABLE;
- hpcd_USB_FS.Init.lpm_enable = DISABLE;
- hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
- if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
- {
- _Error_Handler(__FILE__, __LINE__);
- }
-
-}
-
/** Configure pins as
* Analog
* Input
* Description : This file provides code for the MSP Initialization
* and de-Initialization codes.
******************************************************************************
- ** This notice applies to any and all portions of this file
+ * This notice applies to any and all portions of this file
* that are not between comment pairs USER CODE BEGIN and
* USER CODE END. Other portions of this file, whether
* inserted by the user or by software development tools
* are owned by their respective copyright owners.
*
- * COPYRIGHT(c) 2018 STMicroelectronics
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
*
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
*
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* USER CODE END MspInit 1 */
}
-void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
-{
-
- if(hpcd->Instance==USB)
- {
- /* USER CODE BEGIN USB_MspInit 0 */
-
- /* USER CODE END USB_MspInit 0 */
- /* Peripheral clock enable */
- __HAL_RCC_USB_CLK_ENABLE();
- /* USB interrupt Init */
- HAL_NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, 0, 0);
- HAL_NVIC_EnableIRQ(USB_HP_CAN1_TX_IRQn);
- HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0);
- HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn);
- /* USER CODE BEGIN USB_MspInit 1 */
-
- /* USER CODE END USB_MspInit 1 */
- }
-
-}
-
-void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
-{
-
- if(hpcd->Instance==USB)
- {
- /* USER CODE BEGIN USB_MspDeInit 0 */
-
- /* USER CODE END USB_MspDeInit 0 */
- /* Peripheral clock disable */
- __HAL_RCC_USB_CLK_DISABLE();
-
- /* USB interrupt DeInit */
- HAL_NVIC_DisableIRQ(USB_HP_CAN1_TX_IRQn);
- HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn);
- /* USER CODE BEGIN USB_MspDeInit 1 */
-
- /* USER CODE END USB_MspDeInit 1 */
- }
-
-}
-
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
--- /dev/null
+/**
+ ******************************************************************************
+ * @file : usb_device.c
+ * @version : v2.0_Cube
+ * @brief : This file implements the USB Device
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "usb_device.h"
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_dfu.h"
+#include "usbd_dfu_if.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+/* USER CODE BEGIN PFP */
+/* Private function prototypes -----------------------------------------------*/
+
+/* USER CODE END PFP */
+
+/* USB Device Core handle declaration. */
+USBD_HandleTypeDef hUsbDeviceFS;
+
+/*
+ * -- Insert your variables declaration here --
+ */
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*
+ * -- Insert your external function declaration here --
+ */
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/**
+ * Init USB device Library, add supported class and start the library
+ * @retval None
+ */
+void MX_USB_DEVICE_Init(void)
+{
+ /* USER CODE BEGIN USB_DEVICE_Init_PreTreatment */
+
+ /* USER CODE END USB_DEVICE_Init_PreTreatment */
+
+ /* Init Device Library, add supported class and start the library. */
+ USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS);
+
+ USBD_RegisterClass(&hUsbDeviceFS, &USBD_DFU);
+
+ USBD_DFU_RegisterMedia(&hUsbDeviceFS, &USBD_DFU_fops_FS);
+
+ USBD_Start(&hUsbDeviceFS);
+
+ /* USER CODE BEGIN USB_DEVICE_Init_PostTreatment */
+
+ /* USER CODE END USB_DEVICE_Init_PostTreatment */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file : usbd_conf.c
+ * @version : v2.0_Cube
+ * @brief : This file implements the board support package for the USB device library
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+#include "stm32f1xx_hal.h"
+#include "usbd_def.h"
+#include "usbd_core.h"
+#include "usbd_dfu.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+PCD_HandleTypeDef hpcd_USB_FS;
+void _Error_Handler(char * file, int line);
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* USER CODE BEGIN PFP */
+/* Private function prototypes -----------------------------------------------*/
+
+/* USER CODE END PFP */
+
+/* Private functions ---------------------------------------------------------*/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
+
+/*******************************************************************************
+ LL Driver Callbacks (PCD -> USB Device Library)
+*******************************************************************************/
+/* MSP Init */
+
+void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
+{
+ if(pcdHandle->Instance==USB)
+ {
+ /* USER CODE BEGIN USB_MspInit 0 */
+
+ /* USER CODE END USB_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_USB_CLK_ENABLE();
+
+ /* Peripheral interrupt init */
+ HAL_NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, 0, 0);
+ HAL_NVIC_EnableIRQ(USB_HP_CAN1_TX_IRQn);
+ HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0);
+ HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn);
+ /* USER CODE BEGIN USB_MspInit 1 */
+
+ /* USER CODE END USB_MspInit 1 */
+ }
+}
+
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
+{
+ if(pcdHandle->Instance==USB)
+ {
+ /* USER CODE BEGIN USB_MspDeInit 0 */
+
+ /* USER CODE END USB_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_USB_CLK_DISABLE();
+
+ /* Peripheral interrupt Deinit*/
+ HAL_NVIC_DisableIRQ(USB_HP_CAN1_TX_IRQn);
+
+ HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn);
+
+ /* USER CODE BEGIN USB_MspDeInit 1 */
+
+ /* USER CODE END USB_MspDeInit 1 */
+ }
+}
+
+/**
+ * @brief Setup stage callback
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
+}
+
+/**
+ * @brief Data Out stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
+}
+
+/**
+ * @brief Data In stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
+}
+
+/**
+ * @brief SOF callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+ * @brief Reset callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
+
+ /* Set USB current speed. */
+ switch (hpcd->Init.speed)
+ {
+ case PCD_SPEED_FULL:
+ speed = USBD_SPEED_FULL;
+ break;
+
+ default:
+ speed = USBD_SPEED_FULL;
+ break;
+ }
+ USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed);
+
+ /* Reset Device. */
+ USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+ * @brief Suspend callback.
+ * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Inform USB library that core enters in suspend Mode. */
+ USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
+ /* Enter in STOP mode. */
+ /* USER CODE BEGIN 2 */
+ if (hpcd->Init.low_power_enable)
+ {
+ /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
+ SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
+ }
+ /* USER CODE END 2 */
+}
+
+/**
+ * @brief Resume callback.
+ * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* USER CODE BEGIN 3 */
+
+ /* USER CODE END 3 */
+ USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+ * @brief ISOOUTIncomplete callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
+}
+
+/**
+ * @brief ISOINIncomplete callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
+}
+
+/**
+ * @brief Connect callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+ * @brief Disconnect callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/*******************************************************************************
+ LL Driver Interface (USB Device Library --> PCD)
+*******************************************************************************/
+
+/**
+ * @brief Initializes the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
+{
+ /* Init USB Ip. */
+ /* Link the driver to the stack. */
+ hpcd_USB_FS.pData = pdev;
+ pdev->pData = &hpcd_USB_FS;
+
+ hpcd_USB_FS.Instance = USB;
+ hpcd_USB_FS.Init.dev_endpoints = 8;
+ hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
+ hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_64;
+ hpcd_USB_FS.Init.low_power_enable = DISABLE;
+ hpcd_USB_FS.Init.lpm_enable = DISABLE;
+ hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
+ if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
+ {
+ _Error_Handler(__FILE__, __LINE__);
+ }
+
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18);
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58);
+ return USBD_OK;
+}
+
+/**
+ * @brief De-Initializes the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_DeInit(pdev->pData);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Starts the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_Start(pdev->pData);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Stops the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_Stop(pdev->pData);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Opens an endpoint of the low level driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @param ep_type: Endpoint type
+ * @param ep_mps: Endpoint max packet size
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Closes an endpoint of the low level driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Flushes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Sets a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Clears a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Returns Stall condition.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval Stall (1: Yes, 0: No)
+ */
+uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
+
+ if((ep_addr & 0x80) == 0x80)
+ {
+ return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
+ }
+ else
+ {
+ return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
+ }
+}
+
+/**
+ * @brief Assigns a USB address to the device.
+ * @param pdev: Device handle
+ * @param dev_addr: Device address
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Transmits data over an endpoint.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @param pbuf: Pointer to data to be sent
+ * @param size: Data size
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Prepares an endpoint for reception.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @param pbuf: Pointer to data to be received
+ * @param size: Data size
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Returns the last transfered packet size.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval Recived Data Size
+ */
+uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
+}
+
+/**
+ * @brief Delays routine for the USB device library.
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void USBD_LL_Delay(uint32_t Delay)
+{
+ HAL_Delay(Delay);
+}
+
+/**
+ * @brief Static single allocation.
+ * @param size: Size of allocated memory
+ * @retval None
+ */
+void *USBD_static_malloc(uint32_t size)
+{
+ static uint32_t mem[(sizeof(USBD_DFU_HandleTypeDef)/4)+1];/* On 32-bit boundary */
+ return mem;
+}
+
+/**
+ * @brief Dummy memory free
+ * @param p: Pointer to allocated memory address
+ * @retval None
+ */
+void USBD_static_free(void *p)
+{
+
+}
+
+/**
+ * @brief Software Device Connection
+ * @param hpcd: PCD handle
+ * @param state: Connection state (0: disconnected / 1: connected)
+ * @retval None
+ */
+void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
+{
+ /* USER CODE BEGIN 6 */
+ if (state == 1)
+ {
+ /* Configure Low connection state. */
+
+ }
+ else
+ {
+ /* Configure High connection state. */
+
+ }
+ /* USER CODE END 6 */
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file : usbd_desc.c
+ * @version : v2.0_Cube
+ * @brief : This file implements the USB device descriptors.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_conf.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @addtogroup USBD_DESC
+ * @{
+ */
+
+/** @defgroup USBD_DESC_Private_TypesDefinitions USBD_DESC_Private_TypesDefinitions
+ * @brief Private types.
+ * @{
+ */
+
+/* USER CODE BEGIN PRIVATE_TYPES */
+
+/* USER CODE END PRIVATE_TYPES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Defines USBD_DESC_Private_Defines
+ * @brief Private defines.
+ * @{
+ */
+
+#define USBD_VID 1155
+#define USBD_LANGID_STRING 1033
+#define USBD_MANUFACTURER_STRING "UCW"
+#define USBD_PID_FS 57105
+#define USBD_PRODUCT_STRING_FS "Mysterious Gadget"
+#define USBD_SERIALNUMBER_STRING_FS "00000000002A"
+#define USBD_CONFIGURATION_STRING_FS "DFU Config"
+#define USBD_INTERFACE_STRING_FS "DFU Interface"
+
+/* USER CODE BEGIN PRIVATE_DEFINES */
+
+/* USER CODE END PRIVATE_DEFINES */
+
+/**
+ * @}
+ */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/** @defgroup USBD_DESC_Private_Macros USBD_DESC_Private_Macros
+ * @brief Private macros.
+ * @{
+ */
+
+/* USER CODE BEGIN PRIVATE_MACRO */
+
+/* USER CODE END PRIVATE_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
+ * @brief Private functions declaration.
+ * @{
+ */
+
+uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+
+#ifdef USB_SUPPORT_USER_STRING_DESC
+uint8_t * USBD_FS_USRStringDesc(USBD_SpeedTypeDef speed, uint8_t idx, uint16_t *length);
+#endif /* USB_SUPPORT_USER_STRING_DESC */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
+ * @brief Private variables.
+ * @{
+ */
+
+USBD_DescriptorsTypeDef FS_Desc =
+{
+ USBD_FS_DeviceDescriptor
+, USBD_FS_LangIDStrDescriptor
+, USBD_FS_ManufacturerStrDescriptor
+, USBD_FS_ProductStrDescriptor
+, USBD_FS_SerialStrDescriptor
+, USBD_FS_ConfigStrDescriptor
+, USBD_FS_InterfaceStrDescriptor
+};
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+ #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+/** USB standard device descriptor. */
+__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
+{
+ 0x12, /*bLength */
+ USB_DESC_TYPE_DEVICE, /*bDescriptorType*/
+ 0x00, /*bcdUSB */
+ 0x02,
+ 0x00, /*bDeviceClass*/
+ 0x00, /*bDeviceSubClass*/
+ 0x00, /*bDeviceProtocol*/
+ USB_MAX_EP0_SIZE, /*bMaxPacketSize*/
+ LOBYTE(USBD_VID), /*idVendor*/
+ HIBYTE(USBD_VID), /*idVendor*/
+ LOBYTE(USBD_PID_FS), /*idProduct*/
+ HIBYTE(USBD_PID_FS), /*idProduct*/
+ 0x00, /*bcdDevice rel. 2.00*/
+ 0x02,
+ USBD_IDX_MFC_STR, /*Index of manufacturer string*/
+ USBD_IDX_PRODUCT_STR, /*Index of product string*/
+ USBD_IDX_SERIAL_STR, /*Index of serial number string*/
+ USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/
+};
+
+/* USB_DeviceDescriptor */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
+ * @brief Private variables.
+ * @{
+ */
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+ #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+
+/** USB lang indentifier descriptor. */
+__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END =
+{
+ USB_LEN_LANGID_STR_DESC,
+ USB_DESC_TYPE_STRING,
+ LOBYTE(USBD_LANGID_STRING),
+ HIBYTE(USBD_LANGID_STRING)
+};
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+ #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+/* Internal string descriptor. */
+__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Functions USBD_DESC_Private_Functions
+ * @brief Private functions.
+ * @{
+ */
+
+/**
+ * @brief Return the device descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ *length = sizeof(USBD_FS_DeviceDesc);
+ return USBD_FS_DeviceDesc;
+}
+
+/**
+ * @brief Return the LangID string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ *length = sizeof(USBD_LangIDDesc);
+ return USBD_LangIDDesc;
+}
+
+/**
+ * @brief Return the product string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == 0)
+ {
+ USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the manufacturer string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the serial number string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString((uint8_t *)USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the configuration string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the interface string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == 0)
+ {
+ USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null
+/**
+ ******************************************************************************
+ * @file : usbd_dfu_if.c
+ * @brief : Usb device for Download Firmware Update.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_dfu_if.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @brief Usb device.
+ * @{
+ */
+
+/** @defgroup USBD_DFU
+ * @brief Usb DFU device module.
+ * @{
+ */
+
+/** @defgroup USBD_DFU_Private_TypesDefinitions
+ * @brief Private types.
+ * @{
+ */
+
+/* USER CODE BEGIN PRIVATE_TYPES */
+
+/* USER CODE END PRIVATE_TYPES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DFU_Private_Defines
+ * @brief Private defines.
+ * @{
+ */
+
+#define FLASH_DESC_STR "@Internal Flash /0x08000000/03*016Ka,01*016Kg,01*064Kg,07*128Kg,04*016Kg,01*064Kg,07*128Kg"
+
+/* USER CODE BEGIN PRIVATE_DEFINES */
+
+/* USER CODE END PRIVATE_DEFINES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DFU_Private_Macros
+ * @brief Private macros.
+ * @{
+ */
+
+/* USER CODE BEGIN PRIVATE_MACRO */
+
+/* USER CODE END PRIVATE_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DFU_Private_Variables
+ * @brief Private variables.
+ * @{
+ */
+
+/* USER CODE BEGIN PRIVATE_VARIABLES */
+
+/* USER CODE END PRIVATE_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DFU_Exported_Variables
+ * @brief Public variables.
+ * @{
+ */
+
+extern USBD_HandleTypeDef hUsbDeviceFS;
+
+/* USER CODE BEGIN EXPORTED_VARIABLES */
+
+/* USER CODE END EXPORTED_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DFU_Private_FunctionPrototypes
+ * @brief Private functions declaration.
+ * @{
+ */
+
+static uint16_t MEM_If_Init_FS(void);
+static uint16_t MEM_If_Erase_FS(uint32_t Add);
+static uint16_t MEM_If_Write_FS(uint8_t *src, uint8_t *dest, uint32_t Len);
+static uint8_t *MEM_If_Read_FS(uint8_t *src, uint8_t *dest, uint32_t Len);
+static uint16_t MEM_If_DeInit_FS(void);
+static uint16_t MEM_If_GetStatus_FS(uint32_t Add, uint8_t Cmd, uint8_t *buffer);
+
+/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */
+
+/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */
+
+/**
+ * @}
+ */
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN USBD_DFU_MediaTypeDef USBD_DFU_fops_FS __ALIGN_END =
+{
+ (uint8_t*)FLASH_DESC_STR,
+ MEM_If_Init_FS,
+ MEM_If_DeInit_FS,
+ MEM_If_Erase_FS,
+ MEM_If_Write_FS,
+ MEM_If_Read_FS,
+ MEM_If_GetStatus_FS
+};
+
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @brief Memory initialization routine.
+ * @retval USBD_OK if operation is successful, MAL_FAIL else.
+ */
+uint16_t MEM_If_Init_FS(void)
+{
+ /* USER CODE BEGIN 0 */
+ return (USBD_OK);
+ /* USER CODE END 0 */
+}
+
+/**
+ * @brief De-Initializes Memory
+ * @retval USBD_OK if operation is successful, MAL_FAIL else
+ */
+uint16_t MEM_If_DeInit_FS(void)
+{
+ /* USER CODE BEGIN 1 */
+ return (USBD_OK);
+ /* USER CODE END 1 */
+}
+
+/**
+ * @brief Erase sector.
+ * @param Add: Address of sector to be erased.
+ * @retval 0 if operation is successful, MAL_FAIL else.
+ */
+uint16_t MEM_If_Erase_FS(uint32_t Add)
+{
+ /* USER CODE BEGIN 2 */
+
+ return (USBD_OK);
+ /* USER CODE END 2 */
+}
+
+/**
+ * @brief Memory write routine.
+ * @param src: Pointer to the source buffer. Address to be written to.
+ * @param dest: Pointer to the destination buffer.
+ * @param Len: Number of data to be written (in bytes).
+ * @retval USBD_OK if operation is successful, MAL_FAIL else.
+ */
+uint16_t MEM_If_Write_FS(uint8_t *src, uint8_t *dest, uint32_t Len)
+{
+ /* USER CODE BEGIN 3 */
+ return (USBD_OK);
+ /* USER CODE END 3 */
+}
+
+/**
+ * @brief Memory read routine.
+ * @param src: Pointer to the source buffer. Address to be written to.
+ * @param dest: Pointer to the destination buffer.
+ * @param Len: Number of data to be read (in bytes).
+ * @retval Pointer to the physical address where data should be read.
+ */
+uint8_t *MEM_If_Read_FS(uint8_t *src, uint8_t *dest, uint32_t Len)
+{
+ /* Return a valid address to avoid HardFault */
+ /* USER CODE BEGIN 4 */
+ return (uint8_t*)(USBD_OK);
+ /* USER CODE END 4 */
+}
+
+/**
+ * @brief Get status routine
+ * @param Add: Address to be read from
+ * @param Cmd: Number of data to be read (in bytes)
+ * @param buffer: used for returning the time necessary for a program or an erase operation
+ * @retval USBD_OK if operation is successful
+ */
+uint16_t MEM_If_GetStatus_FS(uint32_t Add, uint8_t Cmd, uint8_t *buffer)
+{
+ /* USER CODE BEGIN 5 */
+ switch (Cmd)
+ {
+ case DFU_MEDIA_PROGRAM:
+
+ break;
+
+ case DFU_MEDIA_ERASE:
+ default:
+
+ break;
+ }
+ return (USBD_OK);
+ /* USER CODE END 5 */
+}
+
+/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
+
+/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
<include></include>\r
</Aincludes>\r
<Cincludes>\r
- <include>../Drivers/CMSIS/Device/ST/STM32F1xx/Include</include>\r
</Cincludes>\r
</inctoremove>\r
\r
<include>Inc</include>\r
<include>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc</include>\r
<include>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy</include>\r
+ <include>/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Inc</include>\r
+ <include>/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Inc</include>\r
<include>/aux/misc/stm/F1-package/Drivers/CMSIS/Device/ST/STM32F1xx/Include</include>\r
<include>/aux/misc/stm/F1-package/Drivers/CMSIS/Include</include>\r
\r
\r
<underRoot>false</underRoot>\r
\r
+ <group>\r
+ <name>Middlewares</name> \r
+ <group>\r
+ <name>USB_Device_Library</name>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c</name>\r
+ </file>\r
+ <file>\r
+ <name>/aux/misc/stm/F1-package/Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Src/usbd_dfu.c</name>\r
+ </file>\r
+ </group>\r
+ </group> \r
<group>\r
<name>Drivers</name> \r
<group>\r
<name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c</name>\r
</file>\r
<file>\r
- <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c</name>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c</name>\r
</file>\r
<file>\r
- <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c</name>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c</name>\r
</file>\r
<file>\r
- <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c</name>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c</name>\r
</file>\r
<file>\r
- <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c</name>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_i2c.c</name>\r
</file>\r
<file>\r
- <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c</name>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_dma.c</name>\r
</file>\r
<file>\r
- <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c</name>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c</name>\r
</file>\r
<file>\r
- <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c</name>\r
+ <name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c</name>\r
</file>\r
<file>\r
<name>/aux/misc/stm/F1-package/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c</name>\r
<name>Src/main.c</name>\r
</file>\r
\r
+ <file>\r
+ <name>Src/usb_device.c</name>\r
+ </file>\r
+\r
+ <file>\r
+ <name>Src/usbd_conf.c</name>\r
+ </file>\r
+\r
+ <file>\r
+ <name>Src/usbd_desc.c</name>\r
+ </file>\r
+\r
+ <file>\r
+ <name>Src/usbd_dfu_if.c</name>\r
+ </file>\r
+\r
<file>\r
<name>Src/stm32f1xx_it.c</name>\r
</file>\r
</file>\r
</group>\r
</group>\r
+ <group>\r
+ <name>Src</name>\r
+ <group>\r
+ <name>usbd_conf.c</name>\r
+ <file>\r
+ <name>Src/usbd_conf.c</name>\r
+ </file>\r
+ </group>\r
+ </group>\r
+ <group>\r
+ <name>Src</name>\r
+ <group>\r
+ <name>usbd_dfu_if.c</name>\r
+ <file>\r
+ <name>Src/usbd_dfu_if.c</name>\r
+ </file>\r
+ </group>\r
+ </group>\r
<group>\r
<name>Src</name>\r
<group>\r
</file>\r
</group>\r
</group>\r
+ <group>\r
+ <name>Src</name>\r
+ <group>\r
+ <name>usb_device.c</name>\r
+ <file>\r
+ <name>Src/usb_device.c</name>\r
+ </file>\r
+ </group>\r
+ </group>\r
+ <group>\r
+ <name>Src</name>\r
+ <group>\r
+ <name>usbd_desc.c</name>\r
+ <file>\r
+ <name>Src/usbd_desc.c</name>\r
+ </file>\r
+ </group>\r
+ </group>\r
<group>\r
<name>Src</name>\r
<group>\r
Mcu.IP3=RCC
Mcu.IP4=SYS
Mcu.IP5=USB
-Mcu.IPNb=6
+Mcu.IP6=USB_DEVICE
+Mcu.IPNb=7
Mcu.Name=STM32F103C(8-B)Tx
Mcu.Package=LQFP48
Mcu.Pin0=PC13-TAMPER-RTC
Mcu.Pin12=PB6
Mcu.Pin13=PB7
Mcu.Pin14=VP_SYS_VS_Systick
+Mcu.Pin15=VP_USB_DEVICE_VS_USB_DEVICE_DFU_FS
Mcu.Pin2=PC15-OSC32_OUT
Mcu.Pin3=PD0-OSC_IN
Mcu.Pin4=PD1-OSC_OUT
Mcu.Pin7=PA11
Mcu.Pin8=PA12
Mcu.Pin9=PA13
-Mcu.PinsNb=15
+Mcu.PinsNb=16
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F103C8Tx
ProjectManager.TargetToolchain=Makefile
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-SystemClock_Config-RCC-false-LL-false,3-MX_I2C1_Init-I2C1-false-LL-true,4-MX_I2C2_Init-I2C2-false-LL-true,5-MX_USB_PCD_Init-USB-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-SystemClock_Config-RCC-false-LL-false,3-MX_I2C1_Init-I2C1-false-LL-true,4-MX_I2C2_Init-I2C2-false-LL-true,5-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-true
RCC.ADCFreqValue=36000000
RCC.AHBFreq_Value=72000000
RCC.APB1CLKDivider=RCC_HCLK_DIV2
RCC.VCOOutput2Freq_Value=8000000
USB.IPParameters=ep0_mps
USB.ep0_mps=DEP0CTL_MPS_64
+USB_DEVICE.CLASS_NAME_FS=DFU
+USB_DEVICE.IPParameters=VirtualMode,VirtualModeFS,CLASS_NAME_FS,MANUFACTURER_STRING,PRODUCT_STRING_DFU_FS,SERIALNUMBER_STRING_DFU_FS
+USB_DEVICE.MANUFACTURER_STRING=UCW
+USB_DEVICE.PRODUCT_STRING_DFU_FS=Mysterious Gadget
+USB_DEVICE.SERIALNUMBER_STRING_DFU_FS=00000000002A
+USB_DEVICE.VirtualMode=Dfu
+USB_DEVICE.VirtualModeFS=Dfu_FS
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_USB_DEVICE_VS_USB_DEVICE_DFU_FS.Mode=DFU_FS
+VP_USB_DEVICE_VS_USB_DEVICE_DFU_FS.Signal=USB_DEVICE_VS_USB_DEVICE_DFU_FS
board=testusb
projects / home-hw.git / commitdiff