*
* (c) 1997--2011 Martin Mares <mj@ucw.cz>
* (c) 2004 Robert Spalek <robert@ucw.cz>
+ * (c) 2014 Pavel Charvat <pchar@ucw.cz>
*
* This software may be freely distributed and used according to the terms
* of the GNU Lesser General Public License.
#include <string.h>
#include <alloca.h>
+#ifdef CONFIG_UCW_CLEAN_ABI
+#define bbcopy_slow ucw_bbcopy_slow
+#define bclose ucw_bclose
+#define bclose_file_helper ucw_bclose_file_helper
+#define bconfig ucw_bconfig
+#define beof_slow ucw_beof_slow
+#define bfdopen ucw_bfdopen
+#define bfdopen_internal ucw_bfdopen_internal
+#define bfdopen_shared ucw_bfdopen_shared
+#define bfilesize ucw_bfilesize
+#define bfilesync ucw_bfilesync
+#define bfix_tmp_file ucw_bfix_tmp_file
+#define bflush ucw_bflush
+#define bfmmopen_internal ucw_bfmmopen_internal
+#define bgetc_slow ucw_bgetc_slow
+#define bgets ucw_bgets
+#define bgets0 ucw_bgets0
+#define bgets_bb ucw_bgets_bb
+#define bgets_mp ucw_bgets_mp
+#define bgets_nodie ucw_bgets_nodie
+#define bgets_stk_init ucw_bgets_stk_init
+#define bgets_stk_step ucw_bgets_stk_step
+#define bopen ucw_bopen
+#define bopen_fd_name ucw_bopen_fd_name
+#define bopen_file ucw_bopen_file
+#define bopen_file_try ucw_bopen_file_try
+#define bopen_limited_fd ucw_bopen_limited_fd
+#define bopen_tmp ucw_bopen_tmp
+#define bopen_tmp_file ucw_bopen_tmp_file
+#define bopen_try ucw_bopen_try
+#define bpeekc_slow ucw_bpeekc_slow
+#define bprintf ucw_bprintf
+#define bputc_slow ucw_bputc_slow
+#define bread_slow ucw_bread_slow
+#define brefill ucw_brefill
+#define brewind ucw_brewind
+#define bseek ucw_bseek
+#define bsetpos ucw_bsetpos
+#define bskip_slow ucw_bskip_slow
+#define bspout ucw_bspout
+#define bthrow ucw_bthrow
+#define bwrite_slow ucw_bwrite_slow
+#define fb_tie ucw_fb_tie
+#define fbatomic_internal_write ucw_fbatomic_internal_write
+#define fbatomic_open ucw_fbatomic_open
+#define fbbuf_init_read ucw_fbbuf_init_read
+#define fbbuf_init_write ucw_fbbuf_init_write
+#define fbdir_cheat ucw_fbdir_cheat
+#define fbdir_open_fd_internal ucw_fbdir_open_fd_internal
+#define fbgrow_create ucw_fbgrow_create
+#define fbgrow_create_mp ucw_fbgrow_create_mp
+#define fbgrow_get_buf ucw_fbgrow_get_buf
+#define fbgrow_reset ucw_fbgrow_reset
+#define fbgrow_rewind ucw_fbgrow_rewind
+#define fbmem_clone_read ucw_fbmem_clone_read
+#define fbmem_create ucw_fbmem_create
+#define fbmulti_append ucw_fbmulti_append
+#define fbmulti_create ucw_fbmulti_create
+#define fbmulti_remove ucw_fbmulti_remove
+#define fbnull_open ucw_fbnull_open
+#define fbnull_start ucw_fbnull_start
+#define fbnull_test ucw_fbnull_test
+#define fbpar_cf ucw_fbpar_cf
+#define fbpar_def ucw_fbpar_def
+#define fbpool_end ucw_fbpool_end
+#define fbpool_init ucw_fbpool_init
+#define fbpool_start ucw_fbpool_start
+#define open_tmp ucw_open_tmp
+#define temp_file_name ucw_temp_file_name
+#define vbprintf ucw_vbprintf
+#endif
+
/***
* === Internal structure [[internal]]
*
* ^ ^ ^ ^
* buffer <= bstop (BE pos) <= bptr (FE pos) <= bufend
*
- * * This schema describes a fastbuf after its initialization or bflush().
+ * * This schema describes a fastbuf after its initialization or @bflush().
* * There is no cached data and we are ready for any read or write operation
* (well, only if the back-end supports it).
* * The interval `[bptr, bufend]` can be used by front-ends
* for how it works.
**/
struct fastbuf {
- byte is_fastbuf[0]; /* Dummy field for checking of type casts */
byte *bptr, *bstop; /* State of the buffer */
byte *buffer, *bufend; /* Start and end of the buffer */
char *name; /* File name (used for error messages) */
* Raises `ucw.fb.open` if the file does not exist.
**/
struct fastbuf *bopen_file(const char *name, int mode, struct fb_params *params);
-struct fastbuf *bopen_file_try(const char *name, int mode, struct fb_params *params); /** Like bopen_file(), but returns NULL on failure. **/
+struct fastbuf *bopen_file_try(const char *name, int mode, struct fb_params *params); /** Like @bopen_file(), but returns NULL on failure. **/
/**
* Opens a temporary file.
/**
* Initialize a new `fbpool`. The structure is allocated by the caller,
- * so bclose() should not be called and no resource tying takes place.
+ * so @bclose() should not be called and no resource tying takes place.
**/
void fbpool_init(struct fbpool *fb); /** Initialize a new mempool fastbuf. **/
/**
byte *expected_max_bptr;
uns slack_size;
};
-#define FB_ATOMIC(f) ((struct fb_atomic *)(f)->is_fastbuf)
/**
* Open an atomic fastbuf.
fbatomic_internal_write(b);
}
+/*** === Null fastbufs ***/
+
+/**
+ * Creates a new "/dev/null"-like fastbuf.
+ * Any read attempt returns an EOF, any write attempt is silently ignored.
+ **/
+struct fastbuf *fbnull_open(uns bufsize);
+
+/**
+ * Can be used by any back-end to switch it to the null mode.
+ * You need to provide at least one byte long buffer for writing.
+ **/
+void fbnull_start(struct fastbuf *b, byte *buf, uns bufsize);
+
+/**
+ * Checks whether a fastbuf has been switched to the null mode.
+ **/
+bool fbnull_test(struct fastbuf *b);
+
+/***
+ * === Fastbufs atop other fastbufs [[fbmulti]]
+ *
+ * Imagine some code which does massive string processing. It takes an input
+ * buffer, writes a part of it into an output buffer, then some other string
+ * and then the remaining part of the input buffer. Or anything else where you
+ * copy all the data at each stage of the complicated process.
+ *
+ * This backend takes multiple fastbufs and concatenates them formally into
+ * one. You may then read them consecutively as they were one fastbuf at all.
+ *
+ * This backend is read-only.
+ *
+ * This backend is seekable iff all of the supplied fastbufs are seekable.
+ *
+ * You aren't allowed to do anything with the underlying buffers while these
+ * are connected into fbmulti.
+ *
+ * The fbmulti is inited by @fbmulti_create(). It returns an empty fbmulti.
+ * Then you call @fbmulti_append() for each fbmulti.
+ *
+ * If @bclose() is called on fbmulti, all the underlying buffers get closed
+ * recursively.
+ *
+ * If you want to keep an underlying fastbuf open after @bclose, just remove it
+ * by @fbmulti_remove where the second parameter is a pointer to the removed
+ * fastbuf. If you pass NULL, all the underlying fastbufs are removed.
+ *
+ * After @fbmulti_remove, the state of the fbmulti is undefined. The only allowed
+ * operation is either another @fbmulti_remove or @bclose on the fbmulti.
+ ***/
+
+/**
+ * Create an empty fbmulti
+ **/
+struct fastbuf *fbmulti_create(void);
+
+/**
+ * Append a fb to fbmulti
+ **/
+void fbmulti_append(struct fastbuf *f, struct fastbuf *fb);
+
+/**
+ * Remove a fb from fbmulti
+ **/
+void fbmulti_remove(struct fastbuf *f, struct fastbuf *fb);
+
/*** === Configuring stream parameters [[bconfig]] ***/
enum bconfig_type { /** Parameters that could be configured. **/
projects / libucw.git / blobdiff