/*
* UCW Library -- Fast Buffered I/O
*
- * (c) 1997--2008 Martin Mares <mj@ucw.cz>
+ * (c) 1997--2011 Martin Mares <mj@ucw.cz>
* (c) 2004 Robert Spalek <robert@ucw.cz>
*
* This software may be freely distributed and used according to the terms
*
* - Initialization:
* * out: `buffer <= bstop <= bptr <= bufend` (flushed).
+ * * @fb_tie() should be called on the newly created fastbuf.
*
* - `refill`:
* * in: `buffer <= bstop <= bptr <= bufend` (reading or flushed).
* for how it works.
**/
struct fastbuf {
- byte is_fastbuf[0]; /* Dummy field for checking of type casts */
byte *bptr, *bstop; /* State of the buffer */
byte *buffer, *bufend; /* Start and end of the buffer */
char *name; /* File name (used for error messages) */
ucw_off_t pos; /* Position of bstop in the file */
+ uns flags; /* See enum fb_flags */
int (*refill)(struct fastbuf *); /* Get a buffer with new data, returns 0 on EOF */
void (*spout)(struct fastbuf *); /* Write buffer data to the file */
int (*seek)(struct fastbuf *, ucw_off_t, int);/* Slow path for @bseek(), buffer already flushed; returns success */
void (*close)(struct fastbuf *); /* Close the stream */
int (*config)(struct fastbuf *, uns, int); /* Configure the stream */
int can_overwrite_buffer; /* Can the buffer be altered? 0=never, 1=temporarily, 2=permanently */
+ struct resource *res; /* The fastbuf can be tied to a resource pool */
};
+/**
+ * Fastbuf flags
+ */
+enum fb_flags {
+ FB_DEAD = 0x1, /* Some fastbuf's method has thrown an exception */
+ FB_DIE_ON_EOF = 0x2, /* Most of read operations throw "fb.eof" on EOF */
+};
+
+/** Tie a fastbuf to a resource in the current resource pool. Returns the pointer to the same fastbuf. **/
+struct fastbuf *fb_tie(struct fastbuf *b); /* Tie fastbuf to a resource if there is an active pool */
+
/***
* === Fastbuf on files [[fbparam]]
*
* Use @params to select the fastbuf back-end and its parameters or
* pass NULL if you are fine with defaults.
*
- * Dies if the file does not exist.
+ * Raises `ucw.fb.open` if the file does not exist.
**/
struct fastbuf *bopen_file(const char *name, int mode, struct fb_params *params);
struct fastbuf *bopen_file_try(const char *name, int mode, struct fb_params *params); /** Like bopen_file(), but returns NULL on failure. **/
struct fastbuf *bfdopen_internal(int fd, const char *name, uns buflen);
struct fastbuf *bfmmopen_internal(int fd, const char *name, uns mode);
+#ifdef CONFIG_UCW_FB_DIRECT
extern uns fbdir_cheat;
struct asio_queue;
struct fastbuf *fbdir_open_fd_internal(int fd, const char *name, struct asio_queue *io_queue, uns buffer_size, uns read_ahead, uns write_back);
+#endif
void bclose_file_helper(struct fastbuf *f, int fd, int is_temp_file);
* of the buffer temporarily. In this case, set @can_overwrite as described
* in <<internal,Internals>>. If you do not care, keep @can_overwrite zero.
*
- * It is not possible to close this fastbuf.
+ * It is not possible to close this fastbuf. This implies that no tying to
+ * resources takes place.
*/
void fbbuf_init_read(struct fastbuf *f, byte *buffer, uns size, uns can_overwrite);
/**
* Creates a write-only fastbuf which writes into a provided memory buffer.
* The fastbuf structure is allocated by the caller and pointed to by @f.
- * An attempt to write behind the end of the buffer dies.
+ * An attempt to write behind the end of the buffer causes the `ucw.fb.write` exception.
*
* Data are written directly into the buffer, so it is not necessary to call @bflush()
* at any moment.
*
- * It is not possible to close this fastbuf.
+ * It is not possible to close this fastbuf. This implies that no tying to
+ * resources takes place.
*/
void fbbuf_init_write(struct fastbuf *f, byte *buffer, uns size);
* At every moment, you can use `fastbuf->buffer` to gain access to the stream.
***/
+struct mempool;
+
struct fastbuf *fbgrow_create(unsigned basic_size); /** Create the growing buffer pre-allocated to @basic_size bytes. **/
+struct fastbuf *fbgrow_create_mp(struct mempool *mp, unsigned basic_size); /** Create the growing buffer pre-allocated to @basic_size bytes. **/
void fbgrow_reset(struct fastbuf *b); /** Reset stream and prepare for writing. **/
void fbgrow_rewind(struct fastbuf *b); /** Prepare for reading (of already written data). **/
+/**
+ * Can be used in any state of @b (for example when writing or after
+ * @fbgrow_rewind()) to return the pointer to internal buffer and its length in
+ * bytes. The returned buffer can be invalidated by further requests.
+ **/
+uns fbgrow_get_buf(struct fastbuf *b, byte **buf);
+
/***
* === Fastbuf on memory pools [[fbpool]]
*
* buffer, but this time the buffer is allocated from within a memory pool.
***/
-struct mempool;
struct fbpool { /** Structure for fastbufs & mempools. **/
struct fastbuf fb;
struct mempool *mp;
};
/**
- * Initialize a new `fbpool`. The structure is allocated by the caller.
+ * Initialize a new `fbpool`. The structure is allocated by the caller,
+ * so bclose() should not be called and no resource tying takes place.
**/
void fbpool_init(struct fbpool *fb); /** Initialize a new mempool fastbuf. **/
/**
byte *expected_max_bptr;
uns slack_size;
};
-#define FB_ATOMIC(f) ((struct fb_atomic *)(f)->is_fastbuf)
/**
* Open an atomic fastbuf.
fbatomic_internal_write(b);
}
+/***
+ * === Fastbufs atop other fastbufs [[fbmulti]]
+ *
+ * Imagine some code which does massive string processing. It takes an input
+ * buffer, writes a part of it into an output buffer, then some other string
+ * and then the remaining part of the input buffer. Or anything else where you
+ * copy all the data at each stage of the complicated process.
+ *
+ * This backend takes multiple fastbufs and concatenates them formally into
+ * one. You may then read them consecutively as they were one fastbuf at all.
+ *
+ * This backend is read-only.
+ *
+ * This backend is seekable iff all of the supplied fastbufs are seekable.
+ *
+ * You aren't allowed to do anything with the underlying buffers while these
+ * are connected into fbmulti.
+ *
+ * The fbmulti is inited by @fbmulti_create(). It returns an empty fbmulti.
+ * Then you call @fbmulti_append() for each fbmulti.
+ *
+ * If @bclose() is called on fbmulti, all the underlying buffers get closed
+ * recursively.
+ *
+ * If you want to keep an underlying fastbuf open after @bclose, just remove it
+ * by @fbmulti_remove where the second parameter is a pointer to the removed
+ * fastbuf. If you pass NULL, all the underlying fastbufs are removed.
+ *
+ * After @fbmulti_remove, the state of the fbmulti is undefined. The only allowed
+ * operation is either another @fbmulti_remove or @bclose on the fbmulti.
+ ***/
+
+/**
+ * Create an empty fbmulti
+ **/
+struct fastbuf *fbmulti_create(void);
+
+/**
+ * Append a fb to fbmulti
+ **/
+void fbmulti_append(struct fastbuf *f, struct fastbuf *fb);
+
+/**
+ * Remove a fb from fbmulti
+ **/
+void fbmulti_remove(struct fastbuf *f, struct fastbuf *fb);
+
/*** === Configuring stream parameters [[bconfig]] ***/
enum bconfig_type { /** Parameters that could be configured. **/
* Can not be used for fastbufs not returned from function (initialized in a parameter, for example the one from `fbbuf_init_read`).
*/
void bclose(struct fastbuf *f);
+void bthrow(struct fastbuf *f, const char *id, const char *fmt, ...) FORMAT_CHECK(printf,3,4) NONRET; /** Throw exception on a given fastbuf **/
+int brefill(struct fastbuf *f, int allow_eof);
+void bspout(struct fastbuf *f);
void bflush(struct fastbuf *f); /** Write data (if it makes any sense, do not use for in-memory buffers). **/
void bseek(struct fastbuf *f, ucw_off_t pos, int whence); /** Seek in the buffer. See `man fseek` for description of @whence. Only for seekable fastbufs. **/
void bsetpos(struct fastbuf *f, ucw_off_t pos); /** Set position to @pos bytes from beginning. Only for seekable fastbufs. **/
return (f->bptr < f->bstop) ? (int) *f->bptr : bpeekc_slow(f);
}
+int beof_slow(struct fastbuf *f);
+static inline int beof(struct fastbuf *f) /** Have I reached EOF? **/
+{
+ return (f->bptr < f->bstop) ? 0 : beof_slow(f);
+}
+
static inline void bungetc(struct fastbuf *f) /** Return last read character back. Only one back is guaranteed to work. **/
{
f->bptr--;
/**
* Reads exactly @l bytes of data into @b.
* If at the end of file, it returns 0.
- * If there are data, but less than @l, it dies.
+ * If there are data, but less than @l, it raises `ucw.fb.eof`.
*/
static inline uns breadb(struct fastbuf *f, void *b, uns l)
{
/**
* Reads a line into @b and strips trailing `\n`.
* Returns pointer to the terminating 0 or NULL on `EOF`.
- * Dies if the line is longer than @l.
+ * Raises `ucw.fb.toolong` if the line is longer than @l.
**/
char *bgets(struct fastbuf *f, char *b, uns l);
char *bgets0(struct fastbuf *f, char *b, uns l); /** The same as @bgets(), but for 0-terminated strings. **/
struct bb_t;
/**
* Read a string, strip the trailing `\n` and store it into growing buffer @b.
- * Dies if the line is longer than @limit.
+ * Raises `ucw.fb.toolong` if the line is longer than @limit.
**/
uns bgets_bb(struct fastbuf *f, struct bb_t *b, uns limit);
/**
projects / libucw.git / blobdiff