* SPDX-License-Identifier: GPL-2.0-or-later
*/
-#include <getopt.h>
#include <memory.h>
#include <stdio.h>
#include <stdlib.h>
+#include <string.h>
#include "lmr/lmr.h"
const char program_name[] = "pcilmr";
+enum mode { MARGIN, FULL, SCAN };
+
static const char usage_msg[]
- = "Usage:\n"
- "pcilmr [<margining options>] <downstream component>\n\n"
+ = "! Utility requires preliminary preparation of the system. Refer to the pcilmr man page !\n\n"
+ "Usage:\n"
+ "pcilmr [--margin] [<margining options>] <downstream component> ...\n"
+ "pcilmr --full [<margining options>]\n"
+ "pcilmr --scan\n\n"
"Device Specifier:\n"
"<device/component>:\t[<domain>:]<bus>:<dev>.<func>\n\n"
+ "Modes:\n"
+ "--margin\t\tMargin selected Links\n"
+ "--full\t\t\tMargin all ready for testing Links in the system (one by one)\n"
+ "--scan\t\t\tScan for Links available for margining\n\n"
"Margining options:\n\n"
"Margining Test settings:\n"
"-c\t\t\tPrint Device Lane Margining Capabilities only. Do not run margining.\n"
"-v <steps>\t\tSpecify maximum number of steps for Voltage Margining.\n"
"Use only one of -T/-t options at the same time (same for -V/-v).\n"
"Without these options utility will use MaxSteps from Device\n"
- "capabilities as test limit.\n\n";
+ "capabilities as test limit.\n\n"
+ "Margining Log settings:\n"
+ "-o <directory>\t\tSave margining results in csv form into the\n"
+ "\t\t\tspecified directory. Utility will generate file with the\n"
+ "\t\t\tname in form of 'lmr_<downstream component>_Rx#_<timestamp>.csv'\n"
+ "\t\t\tfor each successfully tested receiver.\n";
static struct pci_dev *
dev_for_filter(struct pci_access *pacc, char *filter)
{
struct pci_filter pci_filter;
- char dev[17] = { 0 };
- strncpy(dev, filter, sizeof(dev) - 1);
pci_filter_init(pacc, &pci_filter);
- if (pci_filter_parse_slot(&pci_filter, dev))
+ if (pci_filter_parse_slot(&pci_filter, filter))
die("Invalid device ID: %s\n", filter);
if (pci_filter.bus == -1 || pci_filter.slot == -1 || pci_filter.func == -1)
return cnt;
}
+static void
+scan_links(struct pci_access *pacc, bool only_ready)
+{
+ if (only_ready)
+ printf("Links ready for margining:\n");
+ else
+ printf("Links with Lane Margining at the Receiver capabilities:\n");
+ bool flag = true;
+ for (struct pci_dev *up = pacc->devices; up; up = up->next)
+ {
+ if (pci_find_cap(up, PCI_EXT_CAP_ID_LMR, PCI_CAP_EXTENDED))
+ {
+ struct pci_dev *down = find_down_port_for_up(pacc, up);
+
+ if (down && margin_verify_link(down, up))
+ {
+ margin_log_bdfs(down, up);
+ if (!only_ready && (margin_check_ready_bit(down) || margin_check_ready_bit(up)))
+ printf(" - Ready");
+ printf("\n");
+ flag = false;
+ }
+ }
+ }
+ if (flag)
+ printf("Links not found or you don't have enough privileges.\n");
+ pci_cleanup(pacc);
+ exit(0);
+}
+
+static u8
+find_ready_links(struct pci_access *pacc, struct pci_dev **down_ports, struct pci_dev **up_ports,
+ bool cnt_only)
+{
+ u8 cnt = 0;
+ for (struct pci_dev *up = pacc->devices; up; up = up->next)
+ {
+ if (pci_find_cap(up, PCI_EXT_CAP_ID_LMR, PCI_CAP_EXTENDED))
+ {
+ struct pci_dev *down = find_down_port_for_up(pacc, up);
+
+ if (down && margin_verify_link(down, up)
+ && (margin_check_ready_bit(down) || margin_check_ready_bit(up)))
+ {
+ if (!cnt_only)
+ {
+ up_ports[cnt] = up;
+ down_ports[cnt] = down;
+ }
+ cnt++;
+ }
+ }
+ }
+ return cnt;
+}
+
int
main(int argc, char **argv)
{
struct pci_access *pacc;
- struct pci_dev *up_port;
- struct pci_dev *down_port;
+ struct pci_dev **up_ports;
+ struct pci_dev **down_ports;
+ u8 ports_n = 0;
- struct margin_link link;
+ struct margin_link *links;
+ bool *checks_status_ports;
bool status = true;
+ enum mode mode;
- struct margin_results *results;
- u8 results_n;
+ /* each link has several receivers -> several results */
+ struct margin_results **results;
+ u8 *results_n;
- struct margin_args args;
+ struct margin_args *args;
u8 steps_t_arg = 0;
u8 steps_v_arg = 0;
u8 parallel_lanes_arg = 1;
u8 error_limit = 4;
+ u8 lanes_arg[32];
+ u8 recvs_arg[6];
u8 lanes_n = 0;
u8 recvs_n = 0;
bool run_margin = true;
+ char *dir_for_csv = NULL;
+ bool save_csv = false;
+
u64 total_steps = 0;
pacc = pci_alloc();
margin_global_logging = true;
+ struct option long_options[]
+ = { { .name = "margin", .has_arg = no_argument, .flag = NULL, .val = 0 },
+ { .name = "scan", .has_arg = no_argument, .flag = NULL, .val = 1 },
+ { .name = "full", .has_arg = no_argument, .flag = NULL, .val = 2 },
+ { 0, 0, 0, 0 } };
+
int c;
+ c = getopt_long(argc, argv, ":", long_options, NULL);
+
+ switch (c)
+ {
+ case -1: /* no options (strings like component are possible) */
+ /* FALLTHROUGH */
+ case 0:
+ mode = MARGIN;
+ break;
+ case 1:
+ mode = SCAN;
+ if (optind == argc)
+ scan_links(pacc, false);
+ optind--;
+ break;
+ case 2:
+ mode = FULL;
+ break;
+ default: /* unknown option symbol */
+ mode = MARGIN;
+ optind--;
+ break;
+ }
- while ((c = getopt(argc, argv, ":r:e:l:cp:t:v:VT")) != -1)
+ while ((c = getopt(argc, argv, ":r:e:l:cp:t:v:VTo:")) != -1)
{
switch (c)
{
run_margin = false;
break;
case 'l':
- lanes_n = parse_csv_arg(optarg, args.lanes);
+ lanes_n = parse_csv_arg(optarg, lanes_arg);
break;
case 'e':
error_limit = atoi(optarg);
break;
case 'r':
- recvs_n = parse_csv_arg(optarg, args.recvs);
+ recvs_n = parse_csv_arg(optarg, recvs_arg);
+ break;
+ case 'o':
+ dir_for_csv = optarg;
+ save_csv = true;
break;
default:
die("Invalid arguments\n\n%s", usage_msg);
}
}
- if (optind != argc - 1)
+ if (mode == FULL && optind != argc)
+ status = false;
+ if (mode == MARGIN && optind == argc)
status = false;
if (!status && argc > 1)
die("Invalid arguments\n\n%s", usage_msg);
exit(0);
}
- up_port = dev_for_filter(pacc, argv[argc - 1]);
+ if (mode == FULL)
+ {
+ ports_n = find_ready_links(pacc, NULL, NULL, true);
+ if (ports_n == 0)
+ {
+ die("Links not found or you don't have enough privileges.\n");
+ }
+ else
+ {
+ up_ports = xmalloc(ports_n * sizeof(*up_ports));
+ down_ports = xmalloc(ports_n * sizeof(*down_ports));
+ find_ready_links(pacc, down_ports, up_ports, false);
+ }
+ }
+ else if (mode == MARGIN)
+ {
+ ports_n = argc - optind;
+ up_ports = xmalloc(ports_n * sizeof(*up_ports));
+ down_ports = xmalloc(ports_n * sizeof(*down_ports));
- down_port = find_down_port_for_up(pacc, up_port);
- if (!down_port)
- die("Cannot find Upstream Component for the specified device: %s\n", argv[argc - 1]);
+ u8 cnt = 0;
+ while (optind != argc)
+ {
+ up_ports[cnt] = dev_for_filter(pacc, argv[optind]);
+ down_ports[cnt] = find_down_port_for_up(pacc, up_ports[cnt]);
+ if (!down_ports[cnt])
+ die("Cannot find Upstream Component for the specified device: %s\n", argv[optind]);
+ cnt++;
+ optind++;
+ }
+ }
+ else
+ die("Bug in the args parsing!\n");
- if (!pci_find_cap(up_port, PCI_CAP_ID_EXP, PCI_CAP_NORMAL))
+ if (!pci_find_cap(up_ports[0], PCI_CAP_ID_EXP, PCI_CAP_NORMAL))
die("Looks like you don't have enough privileges to access "
"Device Configuration Space.\nTry to run utility as root.\n");
- if (!margin_fill_link(down_port, up_port, &link))
- {
- printf("Link ");
- margin_log_bdfs(down_port, up_port);
- printf(" is not ready for margining.\n"
- "Link data rate must be 16 GT/s or 32 GT/s.\n"
- "Downstream Component must be at D0 PM state.\n");
- status = false;
- }
+ results = xmalloc(ports_n * sizeof(*results));
+ results_n = xmalloc(ports_n * sizeof(*results_n));
+ links = xmalloc(ports_n * sizeof(*links));
+ checks_status_ports = xmalloc(ports_n * sizeof(*checks_status_ports));
+ args = xmalloc(ports_n * sizeof(*args));
- if (status)
+ for (int i = 0; i < ports_n; i++)
{
- args.error_limit = error_limit;
- args.lanes_n = lanes_n;
- args.recvs_n = recvs_n;
- args.steps_t = steps_t_arg;
- args.steps_v = steps_v_arg;
- args.parallel_lanes = parallel_lanes_arg;
- args.run_margin = run_margin;
- args.verbosity = 1;
- args.steps_utility = &total_steps;
+ args[i].error_limit = error_limit;
+ args[i].parallel_lanes = parallel_lanes_arg;
+ args[i].run_margin = run_margin;
+ args[i].verbosity = 1;
+ args[i].steps_t = steps_t_arg;
+ args[i].steps_v = steps_v_arg;
+ for (int j = 0; j < recvs_n; j++)
+ args[i].recvs[j] = recvs_arg[j];
+ args[i].recvs_n = recvs_n;
+ for (int j = 0; j < lanes_n; j++)
+ args[i].lanes[j] = lanes_arg[j];
+ args[i].lanes_n = lanes_n;
+ args[i].steps_utility = &total_steps;
enum margin_test_status args_status;
- if ((args_status = margin_process_args(&link.down_port, &args)) != MARGIN_TEST_OK)
+ if (!margin_fill_link(down_ports[i], up_ports[i], &links[i]))
{
- status = false;
- margin_log_link(&link);
- if (args_status == MARGIN_TEST_ARGS_RECVS)
- margin_log("\nInvalid RecNums specified.\n");
- else if (args_status == MARGIN_TEST_ARGS_LANES)
- margin_log("\nInvalid lanes specified.\n");
+ checks_status_ports[i] = false;
+ results[i] = xmalloc(sizeof(*results[i]));
+ results[i]->test_status = MARGIN_TEST_PREREQS;
+ continue;
}
- }
- if (status)
- {
+ if ((args_status = margin_process_args(&links[i].down_port, &args[i])) != MARGIN_TEST_OK)
+ {
+ checks_status_ports[i] = false;
+ results[i] = xmalloc(sizeof(*results[i]));
+ results[i]->test_status = args_status;
+ continue;
+ }
+
+ checks_status_ports[i] = true;
struct margin_params params;
- for (int i = 0; i < args.recvs_n; i++)
+ for (int j = 0; j < args[i].recvs_n; j++)
{
- if (margin_read_params(pacc, args.recvs[i] == 6 ? up_port : down_port, args.recvs[i],
- ¶ms))
+ if (margin_read_params(pacc, args[i].recvs[j] == 6 ? up_ports[i] : down_ports[i],
+ args[i].recvs[j], ¶ms))
{
u8 steps_t = steps_t_arg ? steps_t_arg : params.timing_steps;
u8 steps_v = steps_v_arg ? steps_v_arg : params.volt_steps;
parallel_lanes_arg;
u8 step_multiplier
- = args.lanes_n / parallel_recv + ((args.lanes_n % parallel_recv) > 0);
+ = args[i].lanes_n / parallel_recv + ((args[i].lanes_n % parallel_recv) > 0);
total_steps += steps_t * step_multiplier;
if (params.ind_left_right_tim)
}
}
}
+ }
- results = margin_test_link(&link, &args, &results_n);
+ for (int i = 0; i < ports_n; i++)
+ {
+ if (checks_status_ports[i])
+ results[i] = margin_test_link(&links[i], &args[i], &results_n[i]);
+ else
+ {
+ results_n[i] = 1;
+ if (results[i]->test_status == MARGIN_TEST_PREREQS)
+ {
+ printf("Link ");
+ margin_log_bdfs(down_ports[i], up_ports[i]);
+ printf(" is not ready for margining.\n"
+ "Link data rate must be 16 GT/s or 32 GT/s.\n"
+ "Downstream Component must be at D0 PM state.\n");
+ }
+ else if (results[i]->test_status == MARGIN_TEST_ARGS_RECVS)
+ {
+ margin_log_link(&links[i]);
+ printf("\nInvalid RecNums specified.\n");
+ }
+ else if (results[i]->test_status == MARGIN_TEST_ARGS_LANES)
+ {
+ margin_log_link(&links[i]);
+ printf("\nInvalid lanes specified.\n");
+ }
+ }
+ printf("\n----\n\n");
}
- if (status && run_margin)
+ if (run_margin)
{
- printf("\nResults:\n");
+ printf("Results:\n");
printf("\nPass/fail criteria:\nTiming:\n");
printf("Minimum Offset (spec): %d %% UI\nRecommended Offset: %d %% UI\n", MARGIN_TIM_MIN,
MARGIN_TIM_RECOMMEND);
printf("THR -\tThe set (using the utility options) \n\tstep threshold has been reached\n\n");
printf("Notations:\nst - steps\n\n");
- margin_results_print_brief(results, results_n);
+ for (int i = 0; i < ports_n; i++)
+ {
+ printf("Link ");
+ margin_log_bdfs(down_ports[i], up_ports[i]);
+ printf(":\n\n");
+ margin_results_print_brief(results[i], results_n[i]);
+ if (save_csv)
+ margin_results_save_csv(results[i], results_n[i], dir_for_csv, up_ports[i]);
+ printf("\n");
+ }
}
- if (status)
- margin_free_results(results, results_n);
+ for (int i = 0; i < ports_n; i++)
+ margin_free_results(results[i], results_n[i]);
+ free(results_n);
+ free(results);
+ free(up_ports);
+ free(down_ports);
+ free(links);
+ free(checks_status_ports);
+ free(args);
pci_cleanup(pacc);
return 0;
projects / pciutils.git / blobdiff