-.TH lspci 8 "@TODAY@" "@VERSION@" "Linux PCI Utilities"
+.TH lspci 8 "@TODAY@" "@VERSION@" "The PCI Utilities"
.IX lspci
.SH NAME
lspci \- list all PCI devices
Show hexadecimal dump of whole PCI configuration space. Available only for root
as several PCI devices
.B crash
-when you try to read undefined portions of the config space (this behaviour probably
+when you try to read undefined portions of the config space (this behavior probably
doesn't violate the PCI standard, but it's at least very stupid).
.TP
+.B -xxxx
+Show hexadecimal dump of the extended PCI configuration space.
+.TP
.B -b
Bus-centric view. Show all IRQ numbers and addresses as seen by the cards on the
PCI bus instead of as seen by the kernel.
Show a tree-like diagram containing all buses, bridges, devices and connections
between them.
.TP
-.B -s [[<bus>]:][<slot>][.[<func>]]
-Show only devices in specified bus, slot and function. Each component of the device
-address can be omitted or set as "*" meaning "any value". All numbers are
+.B -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]
+Show only devices in the specified domain (in case your machine has several host bridges,
+they can either share a common bus number space or each of them can address a PCI domain
+of its own; domains are numbered from 0 to ffff), bus (0 to ff), slot (0 to 1f) and function (0 to 7).
+Each component of the device address can be omitted or set to "*", both meaning "any value". All numbers are
hexadecimal. E.g., "0:" means all devices on bus 0, "0" means all functions of device 0
on any bus, "0.3" selects third function of device 0 on all buses and ".4" shows only
-fourth function of each device.
+the fourth function of each device.
.TP
.B -d [<vendor>]:[<device>]
Show only devices with specified vendor and device ID. Both ID's are given in
-hexadecimal and may be omitted or given as "*" meaning "any value".
+hexadecimal and may be omitted or given as "*", both meaning "any value".
.TP
.B -i <file>
Use
for easy parsing by scripts.
.TP
.B -M
-Invoke bus mapping mode which scans the bus extensively to find all devices including
-those behind misconfigured bridges etc. Please note that this is intended only for
-debugging and as it can crash the machine (only in case of buggy devices, but
-unfortunately these happen to exist), it's available only to root. Also using
--M on PCI access methods which don't directly touch the hardware has no
-sense since the results are (modulo bugs in lspci) identical to normal listing
-modes.
+Invoke bus mapping mode which performs a thorough scan of all PCI devices, including
+those behind misconfigured bridges etc. This option is available only to root and it
+gives meaningful results only if combined with direct hardware access mode (otherwise
+the results are identical to normal listing modes, modulo bugs in lspci). Please note
+that the bus mapper doesn't support PCI domains and scans only domain 0.
.TP
.B --version
Shows
.I lspci
-version. This option should be used standalone.
+version. This option should be used stand-alone.
.SH PCILIB OPTIONS
The PCI utilities use PCILIB (a portable library providing platform-independent
.B -H2
Use direct hardware access via Intel configuration mechanism 2. Warning: This method
is able to address only first 16 devices on any bus and it seems to be very
-unrealiable in many cases. (i386 and compatible only)
+unreliable in many cases. (i386 and compatible only)
.TP
.B -F <file>
Extract all information from given file containing output of lspci -x. This is very
file containing a list of all PCI devices.
.SH SEE ALSO
-.BR setpci (8), update-pciids (8)
+.BR setpci (8),
+.BR update-pciids (8)
.SH AUTHOR
-The Linux PCI Utilities are maintained by Martin Mares <mj@ucw.cz>.
+The PCI Utilities are maintained by Martin Mares <mj@ucw.cz>.