/*
- * $Id: header.h,v 1.8 2002/03/30 15:39:25 mj Exp $
- *
* The PCI Library -- PCI Header Structure (extracted from <linux/pci.h>)
*
* Copyright (c) 1997--2002 Martin Mares <mj@ucw.cz>
#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */
#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */
#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */
-#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL)
-#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL)
+#define PCI_BASE_ADDRESS_MEM_MASK (~(pciaddr_t)0x0f)
+#define PCI_BASE_ADDRESS_IO_MASK (~(pciaddr_t)0x03)
/* bit 1 is reserved if address_space = 1 */
/* Header type 0 (normal devices) */
#define PCI_SUBSYSTEM_ID 0x2e
#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */
#define PCI_ROM_ADDRESS_ENABLE 0x01
-#define PCI_ROM_ADDRESS_MASK (~0x7ffUL)
+#define PCI_ROM_ADDRESS_MASK (~(pciaddr_t)0x7ff)
#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
#define PCI_AGP_RFU 3 /* Rest of capability flags */
#define PCI_AGP_STATUS 4 /* Status register */
#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */
+#define PCI_AGP_STATUS_ISOCH 0x10000 /* Isochronous transactions supported */
+#define PCI_AGP_STATUS_ARQSZ_MASK 0xe000 /* log2(optimum async req size in bytes) - 4 */
+#define PCI_AGP_STATUS_CAL_MASK 0x1c00 /* Calibration cycle timing */
#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */
-#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */
-#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */
-#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */
-#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */
-#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */
+#define PCI_AGP_STATUS_ITA_COH 0x0100 /* In-aperture accesses always coherent */
+#define PCI_AGP_STATUS_GART64 0x0080 /* 64-bit GART entries supported */
+#define PCI_AGP_STATUS_HTRANS 0x0040 /* If 0, core logic can xlate host CPU accesses thru aperture */
+#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing cycles supported */
+#define PCI_AGP_STATUS_FW 0x0010 /* Fast write transfers supported */
+#define PCI_AGP_STATUS_AGP3 0x0008 /* AGP3 mode supported */
+#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported (RFU in AGP3 mode) */
+#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported (8x in AGP3 mode) */
+#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported (4x in AGP3 mode) */
#define PCI_AGP_COMMAND 8 /* Control register */
#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
+#define PCI_AGP_COMMAND_ARQSZ_MASK 0xe000 /* log2(optimum async req size in bytes) - 4 */
+#define PCI_AGP_COMMAND_CAL_MASK 0x1c00 /* Calibration cycle timing */
#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
-#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
-#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
-#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
-#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */
-#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */
+#define PCI_AGP_COMMAND_GART64 0x0080 /* 64-bit GART entries enabled */
+#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow generation of 64-bit addr cycles */
+#define PCI_AGP_COMMAND_FW 0x0010 /* Enable FW transfers */
+#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate (RFU in AGP3 mode) */
+#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate (8x in AGP3 mode) */
+#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate (4x in AGP3 mode) */
#define PCI_AGP_SIZEOF 12
/* Slot Identification */