libpci: ecam: Fix big address range mappings

[pciutils.git] / lib / header.h

diff --git a/lib/header.h b/lib/header.h
index 332c97b5b1e23da505709ba974a3a88516e2fb34..2bace9357f3fea3e817c2f537b70c8f8cc0f6f67 100644 (file)
--- a/lib/header.h
+++ b/lib/header.h
@@ -3,7 +3,9 @@
  *
  *     Copyright (c) 1997--2010 Martin Mares <mj@ucw.cz>
  *
- *     Can be freely distributed and used under the terms of the GNU GPL.
+ *     Can be freely distributed and used under the terms of the GNU GPL v2+
+ *
+ *     SPDX-License-Identifier: GPL-2.0-or-later
  */
 
 /*
@@ -252,6 +254,7 @@
 #define PCI_EXT_CAP_ID_LMR     0x27    /* Lane Margining at Receiver */
 #define PCI_EXT_CAP_ID_HIER_ID 0x28    /* Hierarchy ID */
 #define PCI_EXT_CAP_ID_NPEM    0x29    /* Native PCIe Enclosure Management */
+#define PCI_EXT_CAP_ID_32GT    0x2a    /* Physical Layer 32.0 GT/s */
 #define PCI_EXT_CAP_ID_DOE     0x2e    /* Data Object Exchange */
 
 /*** Definitions of capabilities ***/
@@ -900,9 +903,13 @@
 #define  PCI_EXP_DEVCTL2_ARI           0x0020  /* ARI Forwarding */
 #define  PCI_EXP_DEVCTL2_ATOMICOP_REQUESTER_EN 0x0040  /* AtomicOp RequesterEnable */
 #define  PCI_EXP_DEVCTL2_ATOMICOP_EGRESS_BLOCK 0x0080  /* AtomicOp Egress Blocking */
+#define  PCI_EXP_DEVCTL2_IDO_REQ_EN    0x0100  /* Allow IDO for requests */
+#define  PCI_EXP_DEVCTL2_IDO_CMP_EN    0x0200  /* Allow IDO for completions */
 #define  PCI_EXP_DEVCTL2_LTR           0x0400  /* LTR enabled */
+#define  PCI_EXP_DEVCTL2_EPR_REQ       0x0800  /* Emergency Power Reduction Request */
 #define  PCI_EXP_DEVCTL2_10BIT_TAG_REQ 0x1000 /* 10 Bit Tag Requester enabled */
 #define  PCI_EXP_DEVCTL2_OBFF(x)               (((x) >> 13) & 3) /* OBFF enabled */
+#define  PCI_EXP_DEVCTL2_EE_TLP_BLK    0x8000  /* End-End TLP Prefix Blocking */
 #define PCI_EXP_DEVSTA2                        0x2a    /* Device Status */
 #define PCI_EXP_LNKCAP2                        0x2c    /* Link Capabilities */
 #define  PCI_EXP_LNKCAP2_SPEED(x)      (((x) >> 1) & 0x7f)
@@ -1312,9 +1319,10 @@
 #define  PCI_PRI_CTRL_ENABLE   0x01    /* Enable */
 #define  PCI_PRI_CTRL_RESET    0x02    /* Reset */
 #define PCI_PRI_STATUS         0x06    /* PRI status register */
-#define  PCI_PRI_STATUS_RF     0x001   /* Response Failure */
-#define  PCI_PRI_STATUS_UPRGI  0x002   /* Unexpected PRG index */
-#define  PCI_PRI_STATUS_STOPPED        0x100   /* PRI Stopped */
+#define  PCI_PRI_STATUS_RF     0x0001  /* Response Failure */
+#define  PCI_PRI_STATUS_UPRGI  0x0002  /* Unexpected PRG index */
+#define  PCI_PRI_STATUS_STOPPED        0x0100  /* PRI Stopped */
+#define  PCI_PRI_STATUS_PASID  0x8000  /* PASID required in PRG response */
 #define PCI_PRI_MAX_REQ                0x08    /* PRI max reqs supported */
 #define PCI_PRI_ALLOC_REQ      0x0c    /* PRI max reqs allowed */
 
@@ -1403,7 +1411,7 @@
 #define PCI_DOE_STS            0xC     /* DOE Status Register */
 #define  PCI_DOE_STS_BUSY              0x1     /* DOE Busy */
 #define  PCI_DOE_STS_INT               0x2     /* DOE Interrupt Status */
-#define  PCI_DOE_STS_ERROR             0x3     /* DOE Error */
+#define  PCI_DOE_STS_ERROR             0x4     /* DOE Error */
 #define  PCI_DOE_STS_OBJECT_READY      0x80000000 /* Data Object Ready */
 
 /*