#include <libopencm3/cm3/scb.h>
#include <libopencm3/cm3/systick.h>
#include <libopencm3/stm32/rcc.h>
+#include <libopencm3/stm32/crc.h>
#include <libopencm3/stm32/gpio.h>
#include <libopencm3/stm32/flash.h>
#include <libopencm3/stm32/usart.h>
#define DEBUG(x...) do { } while (0)
#endif
-byte usbd_control_buffer[1024];
+// Offsets to firmware header fields (see tools/dfu-sign.c)
+#define HDR_LENGTH 0x1c
+#define HDR_FLASH_IN_PROGRESS 0x20
-static enum dfu_state usbdfu_state = STATE_DFU_IDLE;
+// DFU blocks should be equal to erase blocks of the flash
+#define BLOCK_SIZE 1024
+byte usbd_control_buffer[BLOCK_SIZE];
+
+static enum dfu_state dfu_state = STATE_DFU_IDLE;
+static uint timeout;
+#define DEFAULT_TIMEOUT 5000 // ms
+#define DFU_TIMEOUT 2000
static struct {
byte buf[sizeof(usbd_control_buffer)];
- u16 len;
- u32 addr;
u16 blocknum;
+ u16 len;
} prog;
static char usb_serial_number[13];
enum usb_string {
STR_MANUFACTURER = 1,
- STR_DEVICE,
+ STR_PRODUCT,
STR_SERIAL,
};
static const char *usb_strings[] = {
BOOTLOADER_MFG_NAME,
- BOOTLOADER_DEV_NAME,
+ BOOTLOADER_PROD_NAME,
usb_serial_number,
};
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = BOOTLOADER_MFG_ID,
- .idProduct = BOOTLOADER_DEV_ID,
- .bcdDevice = BOOTLOADER_DEV_VERSION,
+ .idProduct = BOOTLOADER_PROD_ID,
+ .bcdDevice = BOOTLOADER_PROD_VERSION,
.iManufacturer = STR_MANUFACTURER,
- .iProduct = STR_DEVICE,
+ .iProduct = STR_PRODUCT,
.iSerialNumber = STR_SERIAL,
.bNumConfigurations = 1,
};
.bDescriptorType = DFU_FUNCTIONAL,
.bmAttributes = USB_DFU_CAN_DOWNLOAD | USB_DFU_WILL_DETACH,
.wDetachTimeout = 255,
- .wTransferSize = 1024,
+ .wTransferSize = BLOCK_SIZE,
.bcdDFUVersion = 0x0100,
};
.interface = ifaces,
};
-static byte usbdfu_getstatus(usbd_device *usbd_dev UNUSED, u32 *bwPollTimeout)
+static inline u32 get_u32(u32 addr)
+{
+ return *(u32*)addr;
+}
+
+static inline u16 get_u16(u32 addr)
+{
+ return *(u16*)addr;
+}
+
+static bool verify_firmware(void)
+{
+ u32 len = get_u32(BOOTLOADER_APP_START + HDR_LENGTH);
+ u16 flash_in_progress = get_u16(BOOTLOADER_APP_START + HDR_FLASH_IN_PROGRESS);
+
+ // FIXME: Should check if len is reasonable
+
+ crc_reset();
+ u32 crc = crc_calculate_block((u32 *)BOOTLOADER_APP_START, len/4);
+ u32 want_crc = get_u32(BOOTLOADER_APP_START + len);
+ DEBUG("DFU: fip=%04x crc=%08x/%08x len=%u\n", (uint) flash_in_progress, (uint) crc, (uint) want_crc, (uint) len);
+ if (flash_in_progress || crc != want_crc) {
+ DEBUG("DFU: Bad firmware\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+static byte dfu_getstatus(usbd_device *usbd_dev UNUSED, u32 *bwPollTimeout)
{
- switch (usbdfu_state) {
+ switch (dfu_state) {
case STATE_DFU_DNLOAD_SYNC:
- usbdfu_state = STATE_DFU_DNBUSY;
+ dfu_state = STATE_DFU_DNBUSY;
*bwPollTimeout = 100;
return DFU_STATUS_OK;
case STATE_DFU_MANIFEST_SYNC:
/* Device will reset when read is complete. */
- usbdfu_state = STATE_DFU_MANIFEST;
+ dfu_state = STATE_DFU_MANIFEST;
return DFU_STATUS_OK;
+ case STATE_DFU_ERROR:
+ return DFU_STATUS_ERR_VERIFY;
default:
return DFU_STATUS_OK;
}
}
-static void usbdfu_getstatus_complete(usbd_device *usbd_dev UNUSED, struct usb_setup_data *req UNUSED)
+static void dfu_getstatus_complete(usbd_device *usbd_dev UNUSED, struct usb_setup_data *req UNUSED)
{
- switch (usbdfu_state) {
- case STATE_DFU_DNBUSY: {
+ switch (dfu_state) {
+ case STATE_DFU_DNBUSY:
+ if (prog.blocknum == 0) {
+ // The "flash in progress" word is programmed as 0xffff first and reset later
+ *(u16*)(prog.buf + HDR_FLASH_IN_PROGRESS) = 0xffff;
+ }
+ u32 baseaddr = BOOTLOADER_APP_START + prog.blocknum * BLOCK_SIZE;
+ DEBUG("DFU: Block %u -> %08x + %u\n", prog.blocknum, (uint) baseaddr, prog.len);
flash_unlock();
- u32 baseaddr = BOOTLOADER_APP_START + prog.blocknum * dfu_function.wTransferSize;
- DEBUG("DFU: Block %u -> %08x\n", prog.blocknum, (uint) baseaddr);
flash_erase_page(baseaddr);
- for (uint i = 0; i < prog.len; i += 2) {
- u16 *dat = (u16 *)(prog.buf + i);
- flash_program_half_word(baseaddr + i, *dat);
- }
+ for (uint i = 0; i < prog.len; i += 2)
+ flash_program_half_word(baseaddr + i, *(u16*)(prog.buf + i));
flash_lock();
- usbdfu_state = STATE_DFU_DNLOAD_IDLE;
- return;
+ for (uint i = 0; i < prog.len; i++) {
+ if (*(byte *)(baseaddr + i) != prog.buf[i]) {
+ DEBUG("DFU: Verification failed\n");
+ dfu_state = STATE_DFU_ERROR;
+ }
}
+ dfu_state = STATE_DFU_DNLOAD_IDLE;
+ return;
case STATE_DFU_MANIFEST:
- /* USB device must detach, we just reset... */
- scb_reset_system();
- return; /* Will never return. */
+ // At the very end, re-flash the "flash in progress" word
+ flash_unlock();
+ flash_program_half_word(BOOTLOADER_APP_START + 0x20, 0);
+ flash_lock();
+ if (verify_firmware())
+ dfu_state = STATE_DFU_MANIFEST_WAIT_RESET;
+ else
+ dfu_state = STATE_DFU_ERROR;
+ return;
default:
return;
}
}
-static enum usbd_request_return_codes usbdfu_control_request(usbd_device *usbd_dev,
+static enum usbd_request_return_codes dfu_control_request(usbd_device *usbd_dev,
struct usb_setup_data *req,
byte **buf,
u16 *len,
if ((req->bmRequestType & 0x7F) != 0x21)
return USBD_REQ_NOTSUPP; /* Only accept class request. */
- DEBUG("DFU: req %02x in state %d\n", req->bRequest, usbdfu_state);
+ DEBUG("DFU: Request %02x in state %d\n", req->bRequest, dfu_state);
+ timeout = DFU_TIMEOUT;
switch (req->bRequest) {
case DFU_DNLOAD:
if (len == NULL || *len == 0) {
- usbdfu_state = STATE_DFU_MANIFEST_SYNC;
+ dfu_state = STATE_DFU_MANIFEST_SYNC;
} else {
/* Copy download data for use on GET_STATUS. */
prog.blocknum = req->wValue;
prog.len = *len;
memcpy(prog.buf, *buf, *len);
- usbdfu_state = STATE_DFU_DNLOAD_SYNC;
+ dfu_state = STATE_DFU_DNLOAD_SYNC;
}
return USBD_REQ_HANDLED;
case DFU_CLRSTATUS:
/* Clear error and return to dfuIDLE. */
- if (usbdfu_state == STATE_DFU_ERROR)
- usbdfu_state = STATE_DFU_IDLE;
+ if (dfu_state == STATE_DFU_ERROR)
+ dfu_state = STATE_DFU_IDLE;
return USBD_REQ_HANDLED;
case DFU_ABORT:
/* Abort returns to dfuIDLE state. */
- usbdfu_state = STATE_DFU_IDLE;
+ dfu_state = STATE_DFU_IDLE;
return USBD_REQ_HANDLED;
case DFU_UPLOAD:
/* Upload not supported for now. */
return USBD_REQ_NOTSUPP;
case DFU_GETSTATUS: {
u32 bwPollTimeout = 0; /* 24-bit number of milliseconds */
- (*buf)[0] = usbdfu_getstatus(usbd_dev, &bwPollTimeout);
+ (*buf)[0] = dfu_getstatus(usbd_dev, &bwPollTimeout);
(*buf)[1] = bwPollTimeout & 0xFF;
(*buf)[2] = (bwPollTimeout >> 8) & 0xFF;
(*buf)[3] = (bwPollTimeout >> 16) & 0xFF;
- (*buf)[4] = usbdfu_state;
+ (*buf)[4] = dfu_state;
(*buf)[5] = 0; /* iString not used here */
*len = 6;
- *complete = usbdfu_getstatus_complete;
+ *complete = dfu_getstatus_complete;
return USBD_REQ_HANDLED;
}
case DFU_GETSTATE:
/* Return state with no state transition. */
- *buf[0] = usbdfu_state;
+ *buf[0] = dfu_state;
*len = 1;
return USBD_REQ_HANDLED;
}
return USBD_REQ_NOTSUPP;
}
-static void usbdfu_set_config(usbd_device *usbd_dev, u16 wValue UNUSED)
+static void dfu_set_config(usbd_device *usbd_dev, u16 wValue UNUSED)
{
usbd_register_control_callback(
- usbd_dev,
- USB_REQ_TYPE_CLASS | USB_REQ_TYPE_INTERFACE,
- USB_REQ_TYPE_TYPE | USB_REQ_TYPE_RECIPIENT,
- usbdfu_control_request);
+ usbd_dev,
+ USB_REQ_TYPE_CLASS | USB_REQ_TYPE_INTERFACE,
+ USB_REQ_TYPE_TYPE | USB_REQ_TYPE_RECIPIENT,
+ dfu_control_request);
}
-static void usbdfu_reset(void)
+static void dfu_reset(void)
{
- usbdfu_state = STATE_DFU_IDLE;
+ dfu_state = STATE_DFU_IDLE;
}
-int main(void)
+/*
+ * This is a modified version of rcc_clock_setup_in_hsi_out_48mhz(),
+ * which properly turns off the PLL before setting its parameters.
+ */
+static void my_rcc_clock_setup_in_hsi_out_48mhz(void)
{
- usbd_device *usbd_dev;
+ /* Enable internal high-speed oscillator. */
+ rcc_osc_on(RCC_HSI);
+ rcc_wait_for_osc_ready(RCC_HSI);
+
+ /* Select HSI as SYSCLK source. */
+ rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_HSICLK);
+
+ // XXX: Disable PLL
+ rcc_osc_off(RCC_PLL);
+
+ /*
+ * Set prescalers for AHB, ADC, ABP1, ABP2.
+ * Do this before touching the PLL (TODO: why?).
+ */
+ rcc_set_hpre(RCC_CFGR_HPRE_SYSCLK_NODIV); /*Set.48MHz Max.72MHz */
+ rcc_set_adcpre(RCC_CFGR_ADCPRE_PCLK2_DIV8); /*Set. 6MHz Max.14MHz */
+ rcc_set_ppre1(RCC_CFGR_PPRE1_HCLK_DIV2); /*Set.24MHz Max.36MHz */
+ rcc_set_ppre2(RCC_CFGR_PPRE2_HCLK_NODIV); /*Set.48MHz Max.72MHz */
+ rcc_set_usbpre(RCC_CFGR_USBPRE_PLL_CLK_NODIV); /*Set.48MHz Max.48MHz */
+
+ /*
+ * Sysclk runs with 48MHz -> 1 waitstates.
+ * 0WS from 0-24MHz
+ * 1WS from 24-48MHz
+ * 2WS from 48-72MHz
+ */
+ flash_set_ws(FLASH_ACR_LATENCY_1WS);
+
+ /*
+ * Set the PLL multiplication factor to 12.
+ * 8MHz (internal) * 12 (multiplier) / 2 (PLLSRC_HSI_CLK_DIV2) = 48MHz
+ */
+ rcc_set_pll_multiplication_factor(RCC_CFGR_PLLMUL_PLL_CLK_MUL12);
+
+ /* Select HSI/2 as PLL source. */
+ rcc_set_pll_source(RCC_CFGR_PLLSRC_HSI_CLK_DIV2);
+
+ /* Enable PLL oscillator and wait for it to stabilize. */
+ rcc_osc_on(RCC_PLL);
+ rcc_wait_for_osc_ready(RCC_PLL);
+
+ /* Select PLL as SYSCLK source. */
+ rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_PLLCLK);
+
+ /* Set the peripheral clock frequencies used */
+ rcc_ahb_frequency = 48000000;
+ rcc_apb1_frequency = 24000000;
+ rcc_apb2_frequency = 48000000;
+}
- // Flash programming requires running on the internal oscillator
- rcc_clock_setup_in_hsi_out_48mhz();
+static void clock_plain_hsi(void)
+{
+ // Select HSI as SYSCLK source
+ rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_HSICLK);
+
+ // Disable PLL
+ rcc_osc_off(RCC_PLL);
+
+ // Set prescalers for AHB, ADC, ABP1, ABP2, USB to defaults
+ rcc_set_hpre(RCC_CFGR_HPRE_SYSCLK_NODIV);
+ rcc_set_adcpre(RCC_CFGR_ADCPRE_PCLK2_DIV2);
+ rcc_set_ppre1(RCC_CFGR_PPRE1_HCLK_NODIV);
+ rcc_set_ppre2(RCC_CFGR_PPRE2_HCLK_NODIV);
+ rcc_set_usbpre(RCC_CFGR_USBPRE_PLL_VCO_CLK_DIV3);
+}
+
+static void reset_peripherals(void)
+{
+ // Turn off clock to all peripherals and reset them
+ RCC_AHBENR = 0x00000014;
+ RCC_APB1ENR = 0;
+ RCC_APB2ENR = 0;
+ RCC_APB1RSTR = 0x22fec9ff;
+ RCC_APB2RSTR = 0x0038fffd;
+ RCC_APB1RSTR = 0;
+ RCC_APB2RSTR = 0;
+}
+static void configure_hardware(void)
+{
rcc_periph_clock_enable(RCC_GPIOA);
rcc_periph_clock_enable(RCC_GPIOC);
rcc_periph_clock_enable(RCC_USB);
-
- rcc_periph_reset_pulse(RST_GPIOA);
- rcc_periph_reset_pulse(RST_GPIOC);
- rcc_periph_reset_pulse(RST_USB);
+ rcc_periph_clock_enable(RCC_CRC);
#ifdef DEBUG_USART
// Currently, only USART1 is supported
systick_set_frequency(1000, CPU_CLOCK_MHZ * 1000000);
systick_clear();
systick_counter_enable();
+}
- desig_get_unique_id_as_dfu(usb_serial_number);
-
- DEBUG("DFU: Entered boot-loader (SN %s)\n", usb_serial_number);
-
- // Simulate USB disconnect
+static void usb_disconnect(void)
+{
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_OPENDRAIN, GPIO11 | GPIO12);
gpio_clear(GPIOA, GPIO11 | GPIO12);
- for (uint i=0; i<1000; i++) {
+ for (uint i=0; i<100; i++) {
while (!systick_get_countflag())
;
}
+}
+
+int main(void)
+{
+ usbd_device *usbd_dev;
+
+ reset_peripherals();
+
+ // Flash programming requires running on the internal oscillator
+ my_rcc_clock_setup_in_hsi_out_48mhz();
+
+ configure_hardware();
+ desig_get_unique_id_as_dfu(usb_serial_number);
+
+ DEBUG("DFU: Started (SN %s)\n", usb_serial_number);
+
+ usb_disconnect();
DEBUG("DFU: Ready\n");
debug_led(0);
usbd_dev = usbd_init(&st_usbfs_v1_usb_driver, &dev, &config, usb_strings, ARRAY_SIZE(usb_strings), usbd_control_buffer, sizeof(usbd_control_buffer));
- usbd_register_reset_callback(usbd_dev, usbdfu_reset);
- usbd_register_set_config_callback(usbd_dev, usbdfu_set_config);
+ usbd_register_reset_callback(usbd_dev, dfu_reset);
+ usbd_register_set_config_callback(usbd_dev, dfu_set_config);
restart: ;
- uint timeout = 5000;
- while (timeout) {
+ timeout = DEFAULT_TIMEOUT;
+ while (timeout || (dfu_state != STATE_DFU_IDLE && dfu_state != STATE_DFU_MANIFEST_WAIT_RESET)) {
usbd_poll(usbd_dev);
- if (systick_get_countflag()) {
+ if (timeout && systick_get_countflag()) {
timeout--;
+ // FIXME: Blink LED even after timeout
if (!(timeout & 0x3f))
debug_led_toggle();
}
}
- volatile u32 *app = (volatile u32 *) BOOTLOADER_APP_START;
- u32 sp = app[0];
- u32 pc = app[1];
-
- DEBUG("DFU: Starting application (sp=%08x, pc=%08x)\n", (uint) sp, (uint) pc);
- if (sp & 0x2ffe0000 != 0x20000000) {
- DEBUG("DFU: Suspicious SP, refusing to start\n");
+ if (!verify_firmware())
goto restart;
- }
+
+ u32 sp = get_u32(BOOTLOADER_APP_START);
+ u32 pc = get_u32(BOOTLOADER_APP_START + 4);
+ DEBUG("DFU: Boot (sp=%08x pc=%08x)\n", (uint) sp, (uint) pc);
#ifdef DEBUG_USART
while (!usart_get_flag(DEBUG_USART, USART_FLAG_TC))
;
#endif
debug_led(0);
- cm_disable_interrupts();
+
+ reset_peripherals();
+ clock_plain_hsi();
/* Set vector table base address. */
- SCB_VTOR = BOOTLOADER_APP_START & 0xFFFF;
+ SCB_VTOR = BOOTLOADER_APP_START;
/* Initialize master stack pointer. */
asm volatile("msr msp, %0"::"g" (sp));