}
echo_n "Configuring libpci for your system..."
-sharedir=${1:-/usr/share}
+idsdir=${1:-/usr/share}
version=${2:-0.0}
sys=`uname -s`
rel=`uname -r`
else
cpu=`uname -m | sed 's/^i.86$/i386/;s/^sun4u$/sparc64/;s/^i86pc$/i386/'`
fi
-echo " $sys/$cpu $rel"
+if [ "$sys" = "GNU/kFreeBSD" -o "$sys" = "DragonFly" ]
+then
+ sys=freebsd
+fi
+host=${3:-$cpu-$sys}
+# CAVEAT: tr on Solaris is a bit weird and the extra [] is otherwise harmless.
+host=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)$/\1--\2/' | tr '[A-Z]' '[a-z]'`
+cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+sys=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+rel=${4:-$rel}
+echo " $host $rel"
+zlib=$5
c=config.h
-echo >$c "#define ARCH_`echo $cpu | tr 'a-z' 'A-Z'`"
-echo >>$c "#define OS_`echo $sys | tr 'a-z' 'A-Z'`"
+m=config.mk
+echo >$c "#define PCI_ARCH_`echo $cpu | tr '[a-z]' '[A-Z]'`"
+echo >>$c "#define PCI_OS_`echo $sys | tr '[a-z]' '[A-Z]'`"
+rm -f $m
echo_n "Looking for access methods..."
case $sys in
- Linux)
- case $rel in
- 2.[1-9]*|[3-9]*) echo_n " proc"
- echo >>$c '#define HAVE_PM_LINUX_PROC'
- echo >>$c '#define HAVE_LINUX_BYTEORDER_H'
- echo >>$c '#define PATH_PROC_BUS_PCI "/proc/bus/pci"'
- ok=1
- ;;
- esac
+ linux*)
+ echo_n " sysfs proc"
+ echo >>$c '#define PCI_HAVE_PM_LINUX_SYSFS'
+ echo >>$c '#define PCI_HAVE_PM_LINUX_PROC'
+ echo >>$c '#define PCI_HAVE_LINUX_BYTEORDER_H'
+ echo >>$c '#define PCI_PATH_PROC_BUS_PCI "/proc/bus/pci"'
+ echo >>$c '#define PCI_PATH_SYS_BUS_PCI "/sys/bus/pci"'
case $cpu in
i386) echo_n " i386-ports"
- echo >>$c '#define HAVE_PM_INTEL_CONF'
- ok=1
- ;;
- alpha|ia64|sparc|sparc64)
- echo >>$c '#define HAVE_64BIT_ADDRESS'
+ echo >>$c '#define PCI_HAVE_PM_INTEL_CONF'
;;
esac
+ echo >>$c '#define PCI_HAVE_64BIT_ADDRESS'
;;
- SunOS)
+ sunos)
case $cpu in
i386) echo_n " i386-ports"
- echo >>$c "#define HAVE_PM_INTEL_CONF"
- ok=1
+ echo >>$c "#define PCI_HAVE_PM_INTEL_CONF"
;;
*)
- echo " The PCI library is does not support Solaris for this architecture: $cpu"
+ echo " The PCI library does not support Solaris for this architecture: $cpu"
exit 1
;;
esac
+ echo >>$c '#define PCI_HAVE_STDINT_H'
;;
-
- FreeBSD)
+ freebsd)
echo_n " fbsd-device"
- echo >>$c '#define HAVE_PM_FBSD_DEVICE'
- echo >>$c '#define PATH_FBSD_DEVICE "/dev/pci"'
- ok=1
+ echo >>$c '#define PCI_HAVE_PM_FBSD_DEVICE'
+ echo >>$c '#define PCI_PATH_FBSD_DEVICE "/dev/pci"'
+ ;;
+ openbsd)
+ echo_n " obsd-device"
+ echo >>$c '#define PCI_HAVE_PM_OBSD_DEVICE'
+ echo >>$c '#define PCI_PATH_OBSD_DEVICE "/dev/pci"'
;;
- AIX)
+ aix)
echo_n " aix-device"
- echo >>$c '#define HAVE_PM_AIX_DEVICE'
- ok=1
+ echo >>$c '#define PCI_HAVE_PM_AIX_DEVICE'
+ echo >>$m 'CFLAGS=-g'
+ echo >>$m 'INSTALL=installbsd'
+ echo >>$m 'DIRINSTALL=mkdir -p'
;;
- NetBSD)
+ netbsd)
echo_n " nbsd-libpci"
- echo >>$c '#define HAVE_PM_NBSD_LIBPCI'
- echo >>$c '#define PATH_NBSD_DEVICE "/dev/pci0"'
- ok=1
+ echo >>$c '#define PCI_HAVE_PM_NBSD_LIBPCI'
+ echo >>$c '#define PCI_PATH_NBSD_DEVICE "/dev/pci0"'
+ echo >>$m 'PCILIB=lib/libpciutils.a'
+ echo >>$m 'LDLIBS+=-lpci'
;;
- GNU)
+ gnu)
echo_n " i386-ports"
- echo >>$c '#define HAVE_PM_INTEL_CONF'
- ok=1
+ echo >>$c '#define PCI_HAVE_PM_INTEL_CONF'
;;
*)
echo " Unfortunately, your OS is not supported by the PCI Library"
;;
esac
-echo >>$c '#define HAVE_PM_DUMP'
+echo >>$c '#define PCI_HAVE_PM_DUMP'
echo " dump"
-if [ -z "$ok" ] ; then
- echo "WARNING: No real configuration access method is available."
+
+echo_n "Checking for zlib support... "
+if [ "$zlib" = yes -o "$zlib" = no ] ; then
+ echo "$zlib (set manually)"
+else
+ if [ -f /usr/include/zlib.h ] ; then
+ zlib=yes
+ else
+ zlib=no
+ fi
+ echo "$zlib (auto-detected)"
fi
-echo >>$c "#define PATH_PCI_IDS \"$sharedir/pci.ids\""
+if [ "$zlib" = yes ] ; then
+ echo >>$c '#define PCI_COMPRESSED_IDS'
+ echo >>$c '#define PCI_IDS "pci.ids.gz"'
+ echo >>$m 'LIBZ=-lz'
+ echo >>$m 'LDLIBS+=$(LIBZ)'
+else
+ echo >>$c '#define PCI_IDS "pci.ids"'
+fi
+echo >>$c "#define PCI_PATH_IDS_DIR \"$idsdir\""
+
echo >>$c "#define PCILIB_VERSION \"$version\""
-sed '/^#define [^ ]*$/!d;s/^#define \(.*\)/\1=1/' <$c >config.mk
+sed '/"/{s/^#define \([^ ]*\) "\(.*\)"$/\1=\2/;p;d;};s/^#define \(.*\)/\1=1/' <$c >>$m