\section{Minor-closed graph classes}\id{minorclosed}%
-The contractive algorithm given in section~\ref{contalg} has been found to perform
+The contractive algorithm given in Section~\ref{contalg} has been found to perform
well on planar graphs, but in the general case its time complexity was not linear.
-Can we find any broader class of graphs where the algorithm is still efficient?
+Can we find any broader class of graphs where this algorithm is still linear?
The right context turns out to be the minor-closed graph classes, which are
closed under contractions and have bounded density.
\defn
A~class~$\cal C$ of graphs is \df{minor-closed}, when for every $G\in\cal C$ and
-its every minor~$H$, the graph~$H$ lies in~$\cal C$ as well. A~class~$\cal C$ is called
+every minor~$H$ of~$G$, the graph~$H$ lies in~$\cal C$ as well. A~class~$\cal C$ is called
\df{non-trivial} if at least one graph lies in~$\cal C$ and at least one lies outside~$\cal C$.
\example
\para
Many of the nice structural properties of planar graphs extend to
-minor-closed classes, too (see \cite{lovasz:minors} for a~nice survey
-of this theory and \cite{diestel:gt} for some of the deeper results).
+minor-closed classes, too (see Lov\'asz \cite{lovasz:minors} for a~nice survey
+of this theory and Diestel \cite{diestel:gt} for some of the deeper results).
The most important property is probably the characterization
of such classes in terms of their forbidden minors.
\defn
For a~class~$\cal H$ of graphs we define $\Forb({\cal H})$ as the class
-of graphs which do not contain any of the graphs in~$\cal H$ as a~minor.
+of graphs that do not contain any of the graphs in~$\cal H$ as a~minor.
We will call $\cal H$ the set of \df{forbidden (or excluded) minors} for this class.
We will often abbreviate $\Forb(\{M_1,\ldots,M_n\})$ to $\Forb(M_1,\ldots,M_n)$.
--- this follows from the Kuratowski's theorem (the theorem speaks of forbidden
subdivisions, but while in general this is not the same as forbidden minors, it
is for $K_5$ and $K_{3,3}$). The celebrated theorem by Robertson and Seymour
-guarantees that we can always find a~finite set of forbidden minors.
+guarantees that we can always find a~finite set of forbidden minors:
\thmn{Excluded minors, Robertson \& Seymour \cite{rs:wagner}}
For every non-trivial minor-closed graph class~$\cal C$ there exists
a~finite set~$\cal H$ of graphs such that ${\cal C}=\Forb({\cal H})$.
+\qed
-\proof
This theorem has been proven in a~long series of papers on graph minors
culminating with~\cite{rs:wagner}. See this paper and follow the references
to the previous articles in the series.
-\qed
\para
For analysis of the contractive algorithm,
we will make use of another important property --- the bounded density of
minor-closed classes. The connection between minors and density dates back to
Mader in the 1960's and it can be proven without use of the Robertson-Seymour
-theorem.
+theory.
\defn\id{density}%
-Let $\cal C$ be a class of graphs. We define its \df{edge density} $\varrho(\cal C)$
-to be the infimum of all~$\varrho$'s such that $m(G) \le \varrho\cdot n(G)$
-holds for every $G\in\cal C$.
+Let $G$ be a~graph and $\cal C$ be a class of graphs. We define the \df{edge density}
+$\varrho(G)$ of~$G$ as the average number of edges per vertex, i.e., $m(G)/n(G)$. The
+edge density $\varrho(\cal C)$ of the class is then defined as the supremum of $\varrho(G)$ over all $G\in\cal C$.
-\thmn{Mader \cite{mader:dens}}
+\thmn{Mader \cite{mader:dens}}\id{maderthm}%
For every $k\in{\bb N}$ there exists $h(k)\in{\bb R}$ such that every graph
of average degree at least~$h(k)$ contains a~subdivision of~$K_{k}$ as a~subgraph.
Let us fix~$k$ and prove by induction on~$m$ that every graph of average
degree at least~$2^m$ contains a~subdivision of some graph with $k$~vertices
-and ${k\choose 2}\ge m\ge k$~edges. For $m={k\choose 2}$ the theorem follows
+and $m$~edges (for $k\le m\le {k\choose 2}$). When we reach $m={k\choose 2}$, the theorem follows
as the only graph with~$k$ vertices and~$k\choose 2$ edges is~$K_k$.
The base case $m=k$: Let us observe that when the average degree
Induction step: Let~$G$ be a~graph with average degree at least~$2^m$ and
assume that the theorem already holds for $m-1$. Without loss of generality,
$G$~is connected. Consider a~maximal set $U\subseteq V$ such that the subgraph $G[U]$
-induced by~$U$ is connected and the graph $G.U$ ($G$~with $U$~contracted to
+induced by~$U$ is connected and the graph $G\sgc U$ ($G$~with $U$~contracted to
a~single vertex) has average degree at least~$2^m$ (such~$U$ exists, because
-$G=G.U$ whenever $\vert U\vert=1$). Now consider the subgraph~$H$ induced
+$G=G\sgc U$ whenever $\vert U\vert=1$). Now consider the subgraph~$H$ induced
in~$G$ by the neighbors of~$U$. Every $v\in V(H)$ must have $\deg_H(v) \ge 2^{m-1}$,
as otherwise we can add this vertex to~$U$, contradicting its
maximality. By the induction hypothesis, $H$ contains a~subdivision of some
-graph~$R$ with $r$~vertices and $m-1$ edges. Any two non-adjacent vertices
+graph~$R$ with $k$~vertices and $m-1$ edges. Any two non-adjacent vertices
of~$R$ can be connected in the subdivision by a~path lying entirely in~$G[U]$,
which reveals a~subdivision of a~graph with $m$~edges. \qed
Every non-trivial minor-closed class of graphs has finite edge density.
\proof
-Let~$\cal C$ be any such class, $X$~its smallest excluded minor and $x=n(X)$.
-As $H\minorof K_x$, the class $\cal C$ entirely lies in ${\cal C}'=\Forb(K_x)$, so
+Let~$\cal C$ be any such class, $X$~its excluded minor with the smallest number
+of vertices~$x$.
+As $X\minorof K_x$, the class $\cal C$ is entirely contained in ${\cal C}'=\Forb(K_x)$, so
$\varrho({\cal C}) \le \varrho({\cal C}')$ and therefore it suffices to prove the
theorem for classes excluding a~single complete graph~$K_x$.
$G$~would contain a~subdivision of~$K_x$ and hence $K_x$ as a~minor.
\qed
-\rem
-Minor-closed classes share many other interesting properties, as shown for
-example by Theorem 6.1 of \cite{nesetril:minors}.
+Let us return to the analysis of our algorithm.
-\thmn{MST on minor-closed classes \cite{mm:mst}}\id{mstmcc}%
+\thmn{MST on minor-closed classes, Tarjan \cite{tarjan:dsna}}\id{mstmcc}%
For any fixed non-trivial minor-closed class~$\cal C$ of graphs, the Contractive Bor\o{u}vka's
algorithm (\ref{contbor}) finds the MST of any graph of this class in time
$\O(n)$. (The constant hidden in the~$\O$ depends on the class.)
\proof
Following the proof for planar graphs (\ref{planarbor}), we denote the graph considered
-by the algorithm at the beginning of the $i$-th iteration by~$G_i$ and its number of vertices
+by the algorithm at the beginning of the $i$-th Bor\o{u}vka step by~$G_i$ and its number of vertices
and edges by $n_i$ and $m_i$ respectively. Again the $i$-th phase runs in time $\O(m_i)$
-and $n_i \le n/2^i$, so it remains to show a linear bound for the $m_i$'s.
+and we have $n_i \le n/2^i$, so it remains to show a linear bound for the $m_i$'s.
Since each $G_i$ is produced from~$G_{i-1}$ by a sequence of edge contractions,
-all $G_i$'s are minors of~$G$.\foot{Technically, these are multigraph contractions,
+all $G_i$'s are minors of the input graph.\foot{Technically, these are multigraph contractions,
but followed by flattening, so they are equivalent to contractions on simple graphs.}
-So they also belong to~$\cal C$ and by the previous theorem $m_i\le \varrho({\cal C})\cdot n_i$.
+So they also belong to~$\cal C$ and by the Density theorem $m_i\le \varrho({\cal C})\cdot n_i$.
+The time complexity is therefore $\sum_i \O(m_i) = \sum_i \O(n_i) = \O(\sum_i n/2^i) = \O(n)$.
\qed
-\rem\id{nobatch}%
+\paran{Local contractions}\id{nobatch}%
The contractive algorithm uses ``batch processing'' to perform many contractions
-in a single step. It is also possible to perform contractions one edge at a~time,
+in a single step. It is also possible to perform them one edge at a~time,
batching only the flattenings. A~contraction of an edge~$uv$ can be done
in time~$\O(\deg(u))$ by removing all edges incident with~$u$ and inserting them back
with $u$ replaced by~$v$. Therefore we need to find a lot of vertices with small
\rem
The proof can be also viewed
probabilistically: let $X$ be the degree of a vertex of~$G$ chosen uniformly at
-random. Then ${\bb E}X \le 2\varrho$, hence by the Markov's inequality
+random. Then $\E X \le 2\varrho$, hence by the Markov's inequality
${\rm Pr}[X > 4\varrho] < 1/2$, so for at least $n/2$ vertices~$v$ we have
$\deg(v)\le 4\varrho$.
-\algn{Local Bor\o{u}vka's Algorithm \cite{mm:mst}}%
+\algn{Local Bor\o{u}vka's Algorithm, Mare\v{s} \cite{mm:mst}}%
\algo
\algin A~graph~$G$ with an edge comparison oracle and a~parameter~$t\in{\bb N}$.
\:$T\=\emptyset$.
\:While $n(G)>1$:
\::While there exists a~vertex~$v$ such that $\deg(v)\le t$:
\:::Select the lightest edge~$e$ incident with~$v$.
-\:::Contract~$G$ along~$e$.
+\:::Contract~$e$.
\:::$T\=T + \ell(e)$.
\::Flatten $G$, removing parallel edges and loops.
\algout Minimum spanning tree~$T$.
For the choice $t=4\varrho$, the Lemma on low-degree vertices (\ref{lowdeg})
guarantees that at the beginning of the $i$-th iteration, at least $n_i/2$ vertices
have degree at most~$t$. Each selected edge removes one such vertex and
-possibly increases the degree of another, so at least $n_i/4$ edges get selected.
-Hence $n_i\le 3/4\cdot n_{i-1}$ and therefore $n_i\le n\cdot (3/4)^i$ and the
+possibly increases the degree of another one, so at least $n_i/4$ edges get selected.
+Hence $n_i\le 3/4\cdot n_{i-1}$ and $n_i\le n\cdot (3/4)^i$, so the
algorithm terminates after $\O(\log n)$ iterations.
Each selected edge belongs to $\mst(G)$, because it is the lightest edge of
-the trivial cut $\delta(v)$ (see the Blue Rule in \ref{rbma}).
+the trivial cut $\delta(v)$ (see the Blue rule, Lemma \ref{rbma}).
The steps 6 and~7 therefore correspond to the operation
-described by the Lemma on contraction of MST edges (\ref{contlemma}) and when
+described by the Contraction Lemma (\ref{contlemma}) and when
the algorithm stops, $T$~is indeed the minimum spanning tree.
-It remains to analyse the time complexity of the algorithm. Since $G_i\in{\cal C}$, we have
+It remains to analyse the time complexity of the algorithm. Since $G_i\in{\cal C}$, we know that
$m_i\le \varrho n_i \le \varrho n/2^i$.
We will show that the $i$-th iteration is carried out in time $\O(m_i)$.
Steps 5 and~6 run in time $\O(\deg(v))=\O(t)$ for each~$v$, so summed
-over all $v$'s they take $\O(tn_i)$, which is linear for a fixed class~$\cal C$.
-Flattening takes $\O(m_i)$, as already noted in the analysis of the Contracting
+over all $v$'s they take $\O(tn_i)$, which is $\O(n_i)$ for a fixed class~$\cal C$.
+Flattening takes $\O(m_i)$ as already noted in the analysis of the Contracting
Bor\o{u}vka's Algorithm (see \ref{contiter}).
The whole algorithm therefore runs in time $\O(\sum_i m_i) = \O(\sum_i n/2^i) = \O(n)$.
\qed
-\rem
-For planar graphs, we can get a sharper version of the low-degree lemma,
-showing that the algorithm works with $t=8$ as well (we had $t=12$ as
+\paran{Back to planar graphs}%
+For planar graphs, we can obtain a sharper version of the low-degree lemma
+showing that the algorithm works with $t=8$ as well (we had $t=12$ from
$\varrho=3$). While this does not change the asymptotic time complexity
of the algorithm, the constant-factor speedup can still delight the hearts of
its practical users.
\proof
It suffices to show that the lemma holds for triangulations (if there
are any edges missing, the situation can only get better) with at
-least 3 vertices. Since $G$ is planar, $\sum_v \deg(v) < 6n$.
+least 4 vertices. Since $G$ is planar, we have $\sum_v \deg(v) < 6n$.
The numbers $d(v):=\deg(v)-3$ are non-negative and $\sum_v d(v) < 3n$,
so by the same argument as in the proof of the general lemma, for at least $n/2$
-vertices~$v$ it holds that $d(v) < 6$, hence $\deg(v) \le 8$.
+vertices~$v$ it holds that $d(v) < 6$, and thus $\deg(v) \le 8$.
\qed
\rem\id{hexa}%
The constant~8 in the previous lemma is the best we can have.
Consider a $k\times k$ triangular grid. It has $n=k^2$ vertices, $\O(k)$ of them
-lie on the outer face and have degrees at most~6, the remaining $n-\O(k)$ interior
+lie on the outer face and they have degree at most~6, the remaining $n-\O(k)$ interior
vertices have degree exactly~6. Therefore the number of faces~$f$ is $6/3\cdot n=2n$,
ignoring terms of order $\O(k)$. All interior triangles can be properly colored with
two colors, black and white. Now add a~new vertex inside each white face and connect
-it to all three vertices on the boundary of that face. This adds $f/2 \approx n$
+it to all three vertices on the boundary of that face (see the picture). This adds $f/2 \approx n$
vertices of degree~3 and it increases the degrees of the original $\approx n$ interior
-vertices to~9, therefore about a half of the vertices of the new planar graph
+vertices to~9, therefore about a~half of the vertices of the new planar graph
has degree~9.
\figure{hexangle.eps}{\epsfxsize}{The construction from Remark~\ref{hexa}}
\rem
-The observation in~Theorem~\ref{mstmcc} was also made by Gustedt in~\cite{gustedt:parallel},
-who studied a~parallel version of the contractive Bor\o{u}vka's algorithm applied
+The observation in~Theorem~\ref{mstmcc} was also used by Gustedt \cite{gustedt:parallel},
+to construct parallel version of the Contractive Bor\o{u}vka's algorithm applied
to minor-closed classes.
+\rem
+The bound on the average degree needed to enforce a~$K_k$ minor, which we get from Theorem \ref{maderthm},
+is very coarse. Kostochka \cite{kostochka:lbh} and independently Thomason \cite{thomason:efc}
+have proven that an~average degree $\Omega(k\sqrt{\log k})$ is sufficient and that this
+is the best what we can get.
+
+\rem
+Minor-closed classes share many other interesting properties, for example bounded chromatic
+numbers of various kinds, as shown by Theorem 6.1 of \cite{nesetril:minors}. We can expect
+that many algorithmic problems will turn out to be easy for them.
+
%--------------------------------------------------------------------------------
-\section{Using Fibonacci heaps}
-\id{fibonacci}
+\section{Iterated algorithms}\id{iteralg}%
We have seen that the Jarn\'\i{}k's Algorithm \ref{jarnik} runs in $\Theta(m\log n)$ time.
-Fredman and Tarjan have shown a~faster implementation in~\cite{ft:fibonacci}
-using their Fibonacci heaps. In this section, we convey their results and we
-show several interesting consequences.
+Fredman and Tarjan \cite{ft:fibonacci} have shown a~faster implementation
+using their Fibonacci heaps. In this section, we will convey their results and we
+will show several interesting consequences.
The previous implementation of the algorithm used a binary heap to store all edges
separating the current tree~$T$ from the rest of the graph, i.e., edges of the cut~$\delta(T)$.
When we want to extend~$T$ by the lightest edge of~$\delta(T)$, it is sufficient to
find the lightest active edge~$uv$ and add this edge to~$T$ together with the new vertex~$v$.
Then we have to update the active edges as follows. The edge~$uv$ has just ceased to
-be active. We scan all neighbors~$w$ of the vertex~$v$. When $w$~is in~$T$, no action
+be active. We scan all neighbors~$w$ of the vertex~$v$. When $w$~is already in~$T$, no action
is needed. If $w$~is outside~$T$ and it was not adjacent to~$T$ (there is no active edge
remembered for it so far), we set the edge~$vw$ as active. Otherwise we check the existing
active edge for~$w$ and replace it by~$vw$ if the new edge is lighter.
The following algorithm shows how these operations translate to insertions, decreases
-and deletions on the heap.
+and deletions in the heap.
\algn{Active Edge Jarn\'\i{}k; Fredman and Tarjan \cite{ft:fibonacci}}\id{jarniktwo}%
\algo
\algin A~graph~$G$ with an edge comparison oracle.
\:$v_0\=$ an~arbitrary vertex of~$G$.
\:$T\=$ a tree containing just the vertex~$v_0$.
-\:$H\=$ a~Fibonacci heap of active edges stored as pairs $(u,v)$ where $u\in T,v\not\in T$, ordered by the weights $w(uv)$, initially empty.
+\:$H\=$ a~Fibonacci heap of active edges stored as pairs $(u,v)$ where $u\in T,v\not\in T$, ordered by the weights $w(uv)$, and initially empty.
\:$A\=$ a~mapping of vertices outside~$T$ to their active edges in the heap; initially all elements undefined.
\:\<Insert> all edges incident with~$v_0$ to~$H$ and update~$A$ accordingly.
\:While $H$ is not empty:
\algout Minimum spanning tree~$T$.
\endalgo
-\para
-To analyze the time complexity of this algorithm, we will use the standard
+\paran{Analysis}%
+To analyse the time complexity of this algorithm, we will use the standard
theorem on~complexity of the Fibonacci heap:
-\thmn{Fibonacci heaps} The~Fibonacci heap performs the following operations
+\thmn{Fibonacci heaps, Fredman and Tarjan \cite{ft:fibonacci}} The~Fibonacci heap performs the following operations
with the indicated amortized time complexities:
\itemize\ibull
\:\<Insert> (insertion of a~new element) in $\O(1)$,
-\:\<Decrease> (decreasing value of an~existing element) in $\O(1)$,
+\:\<Decrease> (decreasing the value of an~existing element) in $\O(1)$,
\:\<Merge> (merging of two heaps into one) in $\O(1)$,
\:\<DeleteMin> (deletion of the minimal element) in $\O(\log n)$,
\:\<Delete> (deletion of an~arbitrary element) in $\O(\log n)$,
\qed
\cor
-For graphs with edge density at least $\log n$, this algorithm runs in linear time.
+For graphs with edge density $\Omega(\log n)$, this algorithm runs in linear time.
-\rem
-We can consider using other kinds of heaps which have the property that inserts
+\remn{Other heaps}%
+We can consider using other kinds of heaps that have the property that inserts
and decreases are faster than deletes. Of course, the Fibonacci heaps are asymptotically
optimal (by the standard $\Omega(n\log n)$ lower bound on sorting by comparisons, see
for example \cite{clrs}), so the other data structures can improve only
multiplicative constants or offer an~easier implementation.
-A~nice example is a~\df{$d$-regular heap} --- a~variant of the usual binary heap
+A~nice example is the \df{$d$-regular heap} --- a~variant of the usual binary heap
in the form of a~complete $d$-regular tree. \<Insert>, \<Decrease> and other operations
involving bubbling the values up spend $\O(1)$ time at a~single level, so they run
in~$\O(\log_d n)$ time. \<Delete> and \<DeleteMin> require bubbling down, which incurs
Another possibility is to use the 2-3-heaps \cite{takaoka:twothree} or Trinomial
heaps \cite{takaoka:trinomial}. Both have the same asymptotic complexity as Fibonacci
heaps (the latter even in the worst case, but it does not matter here) and their
-authors claim faster implementation.
+authors claim faster implementation. For integer weights, we can use Thorup's priority
+queues described in \cite{thorup:sssp} which have constant-time \<Insert> and \<Decrease>
+and $\O(\log\log n)$ time \<DeleteMin>. (We will however omit the details since we will
+show a~faster integer algorithm soon.)
-\FIXME{Mention Thorup's Fibonacci-like heaps for integers?}
-
-\para
+\paran{Combining MST algorithms}%
As we already noted, the improved Jarn\'\i{}k's algorithm runs in linear time
for sufficiently dense graphs. In some cases, it is useful to combine it with
another MST algorithm, which identifies a~part of the MST edges and contracts
-the graph to increase its density. For example, we can perform several
-iterations of the Contractive Bor\o{u}vka's algorithm and find the rest of the
-MST by the Active Edge Jarn\'\i{}k's algorithm.
+them to increase the density of the graph. For example, we can perform several Bor\o{u}vka
+steps and then find the rest of the MST by the Active Edge Jarn\'\i{}k's algorithm.
\algn{Mixed Bor\o{u}vka-Jarn\'\i{}k}
\algo
\algin A~graph~$G$ with an edge comparison oracle.
-\:Run $\log\log n$ iterations of the Contractive Bor\o{u}vka's algorithm (\ref{contbor}),
- getting a~MST~$T_1$.
+\:Run $\log\log n$ Bor\o{u}vka steps (\ref{contbor}), getting a~MST~$T_1$.
\:Run the Active Edge Jarn\'\i{}k's algorithm (\ref{jarniktwo}) on the resulting
graph, getting a~MST~$T_2$.
\:Combine $T_1$ and~$T_2$ to~$T$ as in the Contraction lemma (\ref{contlemma}).
and both trees can be combined in linear time, too.
\qed
-\para
+\paran{Iterating Jarn\'\i{}k's algorithm}%
Actually, there is a~much better choice of the algorithms to combine: use the
-Active Edge Jarn\'\i{}k's algorithm multiple times, each time stopping after a~while.
+Active Edge Jarn\'\i{}k's algorithm multiple times, each time stopping it after a~while.
A~good choice of the stopping condition is to place a~limit on the size of the heap.
We start with an~arbitrary vertex, grow the tree as usually and once the heap gets too large,
we conserve the current tree and start with a~different vertex and an~empty heap. When this
process runs out of vertices, it has identified a~sub-forest of the MST, so we can
-contract the graph along the edges of~this forest and iterate.
+contract the edges of~this forest and iterate.
-\algn{Iterated Jarn\'\i{}k; Fredman and Tarjan \cite{ft:fibonacci}}
+\algn{Iterated Jarn\'\i{}k; Fredman and Tarjan \cite{ft:fibonacci}}\id{itjar}%
\algo
\algin A~graph~$G$ with an edge comparison oracle.
\:$T\=\emptyset$. \cmt{edges of the MST}
\:$\ell(e)\=e$ for all edges~$e$. \cmt{edge labels as usually}
-\:$m_0\=m$.
+\:$m_0\=m$. \cmt{in the following, $n$ and $m$ will change with the graph}
\:While $n>1$: \cmt{We will call iterations of this loop \df{phases}.}
\::$F\=\emptyset$. \cmt{forest built in the current phase}
\::$t\=2^{\lceil 2m_0/n \rceil}$. \cmt{the limit on heap size}
\:::Denote the resulting tree~$R$.
\:::$F\=F\cup R$.
\::$T\=T\cup \ell[F]$. \cmt{Remember MST edges found in this phase.}
-\::Contract~$G$ along all edges of~$F$ and flatten it.
+\::Contract all edges of~$F$ and flatten~$G$.
\algout Minimum spanning tree~$T$.
\endalgo
lemma makes the reason clear:
\lemma\id{ijphase}%
-The $i$-th phase of the Iterated Jarn\'\i{}k's algorithm runs in time~$\O(m)$.
+Each phase of the Iterated Jarn\'\i{}k's algorithm runs in time~$\O(m)$.
\proof
-During the phase, the heap always contains at most~$t_i$ elements, so it takes
+During the $i$-th phase, the heap always contains at most~$t_i$ elements, so it takes
time~$\O(\log t_i)=\O(m/n_i)$ to delete an~element from the heap. The trees~$R_i^j$
are edge-disjoint, so there are at most~$n_i$ \<DeleteMin>'s over the course of the phase.
Each edge is considered at most twice (once per its endpoint), so the number
of the other heap operations is~$\O(m_i)$. Together, it equals $\O(m_i + n_i\log t_i) = \O(m_i+m) = \O(m)$.
\qed
-\lemma
+\lemma\id{ijsize}%
Unless the $i$-th phase is final, the forest~$F_i$ consists of at most $2m_i/t_i$ trees.
\proof
As every edge of~$G_i$ is incident with at most two trees of~$F_i$, it is sufficient
to establish that there are at least~$t_i$ edges incident with every such tree, including
-connecting two vertices of the tree.
+edges connecting two vertices of the same tree.
The forest~$F_i$ evolves by additions of the trees~$R_i^j$. Let us consider the possibilities
how the algorithm could have stopped growing the tree~$R_i^j$:
\itemize\ibull
\:the heap had more than~$t_i$ elements (step~10): since the each elements stored in the heap
- corresponds to a~unique edges incident with~$R_i^j$, we have enough such edges;
+ corresponds to a~unique edge incident with~$R_i^j$, we have enough such edges;
\:the algorithm just added a~vertex of~$F_i$ to~$R_i^j$ (step~9): in this case, an~existing
tree of~$F_i$ is extended, so the number of edges incident with it cannot decrease;\foot{%
This is the place where we needed to count the interior edges as well.}
\thm\id{itjarthm}%
The Iterated Jarn\'\i{}k's algorithm finds the MST of the input graph in time
-$\O(m\timesbeta(m,n))$, where $\beta(m,n):=\min\{ i: \log^{(i)}n \le m/n \}$.
+$\O(m\timesbeta(m,n))$, where $\beta(m,n):=\min\{ i \mid \log^{(i)}n \le m/n \}$.
\proof
Phases are finite and in every phase at least one edge is contracted, so the outer
\left. \vcenter{\hbox{$\displaystyle t_i \ge 2^{2^{\scriptstyle 2^{\scriptstyle\rddots^{\scriptstyle m/n}}}} $}}\;\right\}
\,\hbox{a~tower of~$i$ exponentials.}
$$
-As soon as~$t_i\ge n$, the $i$-th phase must be final, because at that time
-there is enough space in the heap to process the whole graph. So~there are
-at most~$\beta(m,n)$ phases and we already know (Lemma~\ref{ijphase}) that each
-phase runs in linear time.
+As soon as~$t_i\ge n$, the $i$-th phase is final, because at that time
+there is enough space in the heap to process the whole graph without stopping. So~there are
+at most~$\beta(m,n)$ phases and we already know that each phase runs in linear
+time (Lemma~\ref{ijphase}).
\qed
\cor
The Iterated Jarn\'\i{}k's algorithm runs in time $\O(m\log^* n)$.
\proof
-$\beta(m,n) \le \beta(1,n) = \log^* n$.
+$\beta(m,n) \le \beta(n,n) \le \log^* n$.
\qed
-\cor
+\cor\id{ijdens}%
When we use the Iterated Jarn\'\i{}k's algorithm on graphs with edge density
at least~$\log^{(k)} n$ for some $k\in{\bb N}^+$, it runs in time~$\O(km)$.
If $m/n \ge \log^{(k)} n$, then $\beta(m,n)\le k$.
\qed
-\obs
+\paran{Integer weights}%
The algorithm spends most of the time in phases which have small heaps. Once the
heap grows to $\Omega(\log^{(k)} n)$ for any fixed~$k$, the graph gets dense enough
to guarantee that at most~$k$ phases remain. This means that if we are able to
we can get a~linear-time algorithm for MST. This is the case when the weights are
integers:
-\thmn{MST for graphs with integer weights, Fredman and Willard \cite{fw:transdich}}
+\thmn{MST for integer weights, Fredman and Willard \cite{fw:transdich}}\id{intmst}%
MST of a~graph with integer edge weights can be found in time $\O(m)$ on the Word-RAM.
\proof
-We will combine the Iterated Jarn\'\i{}k's algorithm with the Q-heaps from section \ref{qheaps}.
+We will combine the Iterated Jarn\'\i{}k's algorithm with the Q-heaps from Section \ref{qheaps}.
We modify the first pass of the algorithm to choose $t=\log n$ and use the Q-heap tree instead
of the Fibonacci heap. From Theorem \ref{qh} and Remark \ref{qhtreerem} we know that the
operations on the Q-heap tree run in constant time, so the modified first phase takes time~$\O(m)$.
Following the analysis of the original algorithm in the proof of Theorem \ref{itjarthm} we obtain
-$t_2\ge 2^{t_1} = 2^{\log n} = n$, so the algorithm stops after the second phase.
+$t_2\ge 2^{t_1} = 2^{\log n} = n$, so the algorithm stops after the second phase.\foot{%
+Alternatively, we can use the Q-heaps directly with $k=\log^{1/4}n$ and then the algorithm stops
+after the third phase.}
\qed
-\para
-We can also use this technique if the edge weights are not integers, but they
-are already sorted. We already knew that the Kruskal's algorithm runs in time
-$\O(m\alpha(n))$ in such cases (Theorem \ref{kruskal}), but we can do better:
-
-\corn{MST for graphs with sorted edges}
-For a~graph with edges already sorted by their weights, we can find
-the MST in time $\O(m)$ on the Word-RAM.
-
-\proof
-We renumber the weights to $1,\ldots,m$, which does not change the MST
-(Lemma \ref{mstiso}), and find the MST using the previous theorem.
-
-\rem
+\paran{Further improvements}%
Gabow et al.~\cite{gabow:mst} have shown how to speed up the Iterated Jarn\'\i{}k's algorithm to~$\O(m\log\beta(m,n))$.
They split the adjacency lists of the vertices to small buckets, keep each bucket
sorted and consider only the lightest edge in each bucket until it is removed.
The mechanics of the algorithm is complex and there is a~lot of technical details
which need careful handling, so we omit the description of this algorithm.
+A~better algorithm will be shown in Chapter~\ref{optchap}.
+
+%--------------------------------------------------------------------------------
+
+\section{Verification of minimality}\id{verifysect}%
+
+Now we will turn our attention to a~slightly different problem: given a~spanning
+tree, how to verify that it is minimum? We will show that this can be achieved
+in linear time and it will serve as a~basis for a~randomized linear-time
+MST algorithm in Section~\ref{randmst}.
+
+MST verification has been studied by Koml\'os \cite{komlos:verify}, who has
+proven that $\O(m)$ edge comparisons are sufficient, but his algorithm needed
+super-linear time to find the edges to compare. Dixon, Rauch and Tarjan \cite{dixon:verify}
+have later shown that the overhead can be reduced
+to linear time on the RAM using preprocessing and table lookup on small
+subtrees. Later, King has given a~simpler algorithm in \cite{king:verifytwo}.
+
+In this section, we will follow Koml\'os's steps and study the comparisons
+needed, saving the actual efficient implementation for later.
+
+\para
+To verify that a~spanning tree~$T$ is minimum, it is sufficient to check that all
+edges outside~$T$ are $T$-heavy (by the Minimality Theorem, \ref{mstthm}). In fact, we will be
+able to find all $T$-light edges efficiently. For each edge $uv\in E\setminus T$,
+we will find the heaviest edge of the tree path $T[u,v]$ and compare its weight
+to $w(uv)$. It is therefore sufficient to solve the following problem:
+
+\problem
+Given a~weighted tree~$T$ and a~set of \df{query paths} $Q \subseteq \{ T[u,v] \mid u,v\in V(T) \}$
+specified by their endpoints, find the heaviest edge \df{(peak)} of every path in~$Q$.
+
+\paran{Bor\o{u}vka trees}%
+Finding the peaks can be burdensome if the tree~$T$ is degenerated,
+so we will first reduce it to the same problem on a~balanced tree. We run
+the Bor\o{u}vka's algorithm on~$T$, which certainly produces $T$ itself, and we
+record the order, in which the subtrees have been merged, in another tree~$B(T)$.
+The peak queries on~$T$ can be then easily translated to peak queries on~$B(T)$.
+
+\defn
+For a~weighted tree~$T$ we define its \df{Bor\o{u}vka tree} $B(T)$ as a~rooted tree which records
+the execution of the Bor\o{u}vka's algorithm run on~$T$. The leaves of $B(T)$
+are all the vertices of~$T$, an~internal vertex~$v$ at level~$i$ from the bottom
+corresponds to a~component tree~$C(v)$ formed in the $i$-th iteration of the algorithm. When
+a~tree $C(v)$ selects an adjacent edge~$e$ and gets merged with some other trees to form
+a~component $C(u)$, we add an~edge $uv$ to~$B(T)$ and set its weight to $w(e)$.
+
+\figure{bortree.eps}{\epsfxsize}{An octipede and its Bor\o{u}vka tree}
+
+\obs
+As the algorithm finishes with a~single component in the last phase, the Bor\o{u}vka tree
+is really a~tree. All its leaves are on the same level and each internal vertex has
+at least two sons. Such trees will be called \df{complete branching trees.}
+
+\lemma
+For every tree~$T$ and every pair of its vertices $x,y\in V(T)$, the peak
+of the path $T[x,y]$ has the same weight as the peak of~the path $B(T)[x,y]$.
+
+\proof
+Let us denote the path $T[x,y]$ by~$P$ and its heaviest edge by~$h=ab$. Similarly,
+let us use $P'$ for $B(T)[x,y]$ and $h'$ for the heaviest edge of~$P'$.
+
+We will first prove that~$h$ has its counterpart of the same weight in~$P'$,
+so $w(h') \ge w(h)$. Consider the lowest vertex $u$ of~$B(T)$ such that the
+component $C(u)$ contains both $a$ and~$b$, and consider the sons $v_a$ and $v_b$ of~$u$
+for which $a\in C(v_a)$ and $b\in C(v_b)$. As the edge~$h$ must have been
+selected by at least one of these components, we assume without loss of generality that
+it was $C(v_a)$, and hence we have $w(uv_a)=w(h)$. We will show that the
+edge~$uv_a$ lies in~$P'$, because exactly one of the vertices $x$, $y$ lies
+in~$C(v_a)$. Both cannot lie there, since it would imply that $C(v_a)$,
+being connected, contains the whole path~$P$, including~$h$. On the other hand,
+if $C(v_a)$ contained neither~$x$ nor~$y$, it would have to be incident with
+another edge of~$P$ different from~$h$, so this lighter edge would be selected
+instead of~$h$.
+
+In the other direction: for any edge~$uv\in P'$, the tree~$C(v)$ is incident
+with at least one edge of~$P$, so the selected edge must be lighter or equal
+to this edge and hence also to~$h$.
+\qed
+
+\para
+We will simplify the problem even further: For an~arbitrary tree~$T$, we split each
+query path $T[x,y]$ to two half-paths $T[x,a]$ and $T[a,y]$ where~$a$ is the
+\df{lowest common ancestor} of~$x$ and~$y$ in~$T$. It is therefore sufficient to
+consider only paths that connect a~vertex with one of its ancestors.
+
+When we combine the two transforms, we get:
+
+\lemman{Balancing of trees}\id{verbranch}%
+For each tree~$T$ on $n$~vertices and a~set~$Q$ of $q$~query paths on~$T$, it is possible
+to find a~complete branching tree~$T'$, together with a~set~$Q'$ of paths on~$T'$,
+such that the weights of the heaviest edges of the paths in~$Q$ can be deduced from
+the same of the paths in~$Q'$. The tree $T'$ has at most $2n$ vertices and $\O(\log n)$
+levels. The set~$Q'$ contains at most~$2q$ paths and each of them connects a~vertex of~$T'$
+with one of its ancestors. The construction of~$T'$ involves $\O(n)$ comparisons
+and the transformation of the answers takes $\O(q)$ comparisons.
+
+\proof
+The tree~$T'$ will be the Bor\o{u}vka tree for~$T$, obtained by running the
+contractive version of the Bor\o{u}vka's algorithm (Algorithm \ref{contbor})
+on~$T$. The algorithm runs in linear time, for example because trees are planar
+(Theorem \ref{planarbor}). We therefore spend $\O(n)$ comparisons in it.
+
+As~$T'$ has~$n$ leaves and it is a~complete branching tree, it has at most~$n$ internal vertices,
+so~$n(T')\le 2n$ as promised. Since the number of iterations of the Bor\o{u}vka's
+algorithm is $\O(\log n)$, the depth of the Bor\o{u}vka tree must be logarithmic as well.
+
+For each query path $T[x,y]$ we find the lowest common ancestor of~$x$ and~$y$
+and split the path by the two half-paths. This produces a~set~$Q'$ of at most~$2q$ half-paths.
+The peak of every original query path is then the heavier of the peaks of its halves.
+\qed
+
+\paran{Bounding comparisons}%
+We will now describe a~simple variant of the depth-first search which finds the
+peaks of all query paths of the balanced problem. As we promised,
+we will take care of the number of comparisons only, as long as all other operations
+are well-defined and they can be performed in polynomial time.
+
+\defn
+For every edge~$e=uv$, we consider the set $Q_e$ of all query paths containing~$e$.
+The vertex of a~path, that is closer to the root, will be called the \df{top} of the path,
+the other vertex its \df{bottom.}
+We define arrays $T_e$ and~$P_e$ as follows: $T_e$~contains
+the tops of the paths in~$Q_e$ in order of their increasing depth (we
+will call them \df{active tops} and each of them will be stored exactly once). For
+each active top~$t=T_e[i]$, we define $P_e[i]$ as the peak of the path $T[v,t]$.
+
+\obs
+As for every~$i$ the path $T[v,T_e[i+1]]$ is contained within $T[v,T_e[i]]$,
+the edges of~$P_e$ must have non-increasing weights, that is $w(P_e[i+1]) \le
+w(P_e[i])$.
+This leads to the following algorithm:
+
+\alg $\<FindPeaks>(u,p,T_p,P_p)$ --- process all queries located in the subtree rooted
+at~$u$ entered from its parent via an~edge~$p$.
+\id{findpeaks}
+
+\algo
+\:Process all query paths whose bottom is~$u$ and record their peaks.
+This is accomplished by finding the index~$i$ of each path's top in~$T_p$ and reading
+the desired edge from~$P_p[i]$.
+
+\:For every son~$v$ of~$u$, process the edge $e=uv$:
+
+\::Construct the array of tops~$T_e$ for the edge~$e$: Start with~$T_p$, remove
+ the tops of the paths that do not contain~$e$ and add the vertex~$u$ itself
+ if there is a~query path which has~$u$ as its top and whose bottom lies somewhere
+ in the subtree rooted at~$v$.
+
+\::Prepare the array of the peaks~$P_e$: Start with~$P_p$, remove the entries
+ corresponding to the tops that are no longer active. If $u$ became an~active
+ top, append~$e$ to the array.
+
+\::Finish~$P_e$:
+ Since the paths leading to all active tops have been extended by the
+ edge~$e$, compare $w(e)$ with weights of the edges recorded in~$P_e$ and replace
+ those edges which are lighter by~$e$.
+ Since $P_p$ was sorted, we can use binary search
+ to locate the boundary between the lighter and heavier edges in~$P_e$.
+
+\::Recurse on~$v$: call $\<FindPeaks>(v,e,T_e,P_e)$.
+\endalgo
+
+\>As we need a~parent edge to start the recursion, we add an~imaginary parent
+edge~$p_0$ of the root vertex~$r$, for which no queries are defined. We can
+therefore start with $\<FindPeaks>(r,p_0,\emptyset,\emptyset)$.
+
+Let us account for the comparisons:
+
+\lemma\id{vercompares}%
+When the procedure \<FindPeaks> is called on the balanced problem, it
+performs $\O(n+q)$ comparisons, where $n$ is the size of the tree and
+$q$ is the number of query paths.
+
+\proof
+We will calculate the number of comparisons~$c_i$ performed when processing the edges
+going from the $(i+1)$-th to the $i$-th level of the tree.
+The levels are numbered from the bottom, so leaves are at level~0 and the root
+is at level $\ell\le \lceil \log_2 n\rceil$. There are $n_i\le n/2^i$ vertices
+at the $i$-th level, so we consider exactly $n_i$ edges. To avoid taking a~logarithm\foot{All logarithms are binary.}
+of zero, we define $\vert T_e\vert=1$ for $T_e=\emptyset$.
+\def\eqalign#1{\null\,\vcenter{\openup\jot
+ \ialign{\strut\hfil$\displaystyle{##}$&$\displaystyle{{}##}$\hfil
+ \crcr#1\crcr}}\,}
+$$\vcenter{\openup\jot\halign{\strut\hfil $\displaystyle{#}$&$\displaystyle{{}#}$\hfil&\quad#\hfil\cr
+c_i &\le \sum_e \left( 1 + \log \vert T_e\vert \right)&(Total cost of the binary searches.)\cr
+ &\le n_i + \sum_e \log\vert T_e\vert&(We sum over $n_i$ edges.)\cr
+ &\le n_i + n_i \cdot {\sum_e \log\vert T_e\vert \over n_i}&(Consider the average of logarithms.) \cr
+ &\le n_i + n_i \cdot \log{\sum_e \vert T_e\vert \over n_i}&(Logarithm is concave.) \cr
+ &\le n_i + n_i \cdot \log{q+n\over n_i}&(Bound the number of tops by queries.) \cr
+ &= n_i \cdot \left( 1 + \log\left({q+n\over n}\cdot{n\over n_i}\right) \right)\cr
+ &= n_i + n_i\log{q+n\over n} + n_i\log{n\over n_i}.\cr
+}}$$
+Summing over all levels, we estimate the total number of comparisons as:
+$$
+c = \sum_i c_i = \left( \sum_i n_i \right) + \left( \sum_i n_i \log{q+n\over n}\right) + \left( \sum_i n_i \log{n\over n_i}\right).
+$$
+The first part is equal to~$n$, the second one to $n\log((q+n)/n)\le q+n$. For the third
+one, we would like to plug in the bound $n_i \le n/2^i$, but we unfortunately have one~$n_i$
+in the denominator. We save the situation by observing that the function $f(x)=x\log(n/x)$
+is decreasing\foot{We can easily check the derivative: $f(x)=(x\ln n-x\ln x)/\ln 2$, so $f'(x)\cdot \ln2 =
+\ln n - \ln x - 1$. We want $f'(x)<0$ and therefore $\ln x > \ln n - 1$, i.e., $x > n/e$.}
+for $x > n/e$, so for $i\ge 2$ it holds that:
+$$
+n_i\log{n\over n_i} \le {n\over 2^i}\cdot\log{n\over n/2^i} = {n\over 2^i} \cdot i.
+$$
+We can therefore rewrite the third part as:
+$$\eqalign{
+\sum_i n_i\log{n\over n_i} &\le n_0\log{n\over n_0} + n_1\log{n\over n_1} + n\cdot\sum_{i\ge 2}{i\over 2^i} \le\cr
+&\le n\log1 + n_1\cdot {n\over n_1} + n\cdot\O(1) = \O(n).\cr
+}$$
+Putting all three parts together, we conclude that:
+$$
+c \le n + (q+n) + \O(n) = \O(n+q). \qedmath
+$$
+
+\para
+When we combine this lemma with the above reduction from general trees to balanced trees, we get the following theorem:
+
+\thmn{Verification of the MST, Koml\'os \cite{komlos:verify}}\id{verify}%
+For every weighted graph~$G$ and its spanning tree~$T$, it is sufficient to
+perform $\O(m)$ comparisons of edge weights to determine whether~$T$ is minimum
+and to find all $T$-light edges in~$G$.
+
+\proof
+We first transform the problem to finding all peaks of a~set
+of query paths in~$T$ (these are exactly the paths covered by the edges
+of $G\setminus T$). We use the reduction from Lemma \ref{verbranch} to get
+an~equivalent problem with a~full branching tree and a~set of parent-descendant
+paths. The reduction costs $\O(m+n)$ comparisons.
+Then we run the \<FindPeaks> procedure (Algorithm \ref{findpeaks}) to find
+the tops of all query paths. According to Lemma \ref{vercompares}, this spends another $\O(m+n)$
+comparisons. Since we (as always) assume that~$G$ is connected, $\O(m+n)=\O(m)$.
+\qed
+
+\paran{Other applications}%
+The problem of computing path maxima or minima in a~weighted tree has several other interesting
+applications. One of them is computing minimum cuts separating given pairs of vertices in a~given
+weighted undirected graph~$G$. We construct a~Gomory-Hu tree~$T$ for the graph as described in \cite{gomoryhu}
+(see also \cite{bhalgat:ght} for a~more efficient algorithm running in time
+$\widetilde\O(mn)$ for unit-cost graphs). The crucial property of this tree is that for every two
+vertices $u$, $v$ of the graph~$G$, the minimum-cost edge on $T[u,v]$ has the same cost
+as the minimum cut separating $u$ and~$v$ in~$G$. Since the construction of~$T$ generally
+takes $\Omega(n^2)$ time, we could of course invest this time in precomputing the minima for
+all pairs of vertices. This would however require quadratic space, so we can better use
+the method of this section which fits in $\O(n+q)$ space for $q$~queries.
+
+\paran{Dynamic verification}%
+A~dynamic version of the problem is also often considered. It calls for a~data structure
+representing a~weighted forest with operations for modifying the structure of the forest
+and querying minima or maxima on paths. Sleator and Tarjan have shown in \cite{sleator:trees}
+how to do this in $\O(\log n)$ time amortized per operation, which leads to
+an~implementation of the Dinic's maximum flow algorithm \cite{dinic:flow}
+in time $\O(mn\log n)$.
+
+%--------------------------------------------------------------------------------
+
+\section{Verification in linear time}\id{verifysect}%
+
+We have proven that $\O(m)$ edge weight comparisons suffice to verify minimality
+of a~given spanning tree. Now we will show an~algorithm for the RAM
+which finds the required comparisons in linear time. We will follow the idea
+of King from \cite{king:verifytwo}, but as we have the power of the RAM data structures
+from Section~\ref{bitsect} at our command, the low-level details will be easier,
+especially the construction of vertex and edge labels.
+
+\para
+First of all, let us make sure that the reduction to fully branching trees
+in the Balancing lemma (\ref{verbranch}) can be made run in linear time. As already noticed
+in the proof, the Bor\o{u}vka's algorithm runs in linear time. Constructing
+the Bor\o{u}vka tree in the process adds at most a~constant overhead to every
+step of the algorithm.
+
+Finding the common ancestors is not trivial, but Harel and Tarjan have shown
+in \cite{harel:nca} that linear time is sufficient on the RAM. Several more
+accessible algorithms have been developed since then (see the Alstrup's survey
+paper \cite{alstrup:nca} and a~particularly elegant algorithm described by Bender
+and Falach-Colton in \cite{bender:lca}). Any of them implies the following
+theorem:
+
+\thmn{Lowest common ancestors}\id{lcathm}%
+On the RAM, it is possible to preprocess a~tree~$T$ in time $\O(n)$ and then
+answer lowest common ancestor queries presented online in constant time.
+
+\cor
+The reductions in Lemma \ref{verbranch} can be performed in time $\O(m)$.
+
+\para
+Having the balanced problem at hand, it remains to implement the procedure \<FindPeaks>
+of Algorithm \ref{findpeaks} efficiently. We need a~compact representation of
+the arrays $T_e$ and~$P_e$, which will allow to reduce the overhead of the algorithm
+to time linear in the number of comparisons performed. To achieve
+this goal, we will encode the arrays in RAM vectors (see Section \ref{bitsect}
+for the vector operations).
+
+\defn
+
+\em{Vertex identifiers:} Since all vertices processed by the procedure
+lie on the path from the root to the current vertex~$u$, we modify the algorithm
+to keep a~stack of these vertices in an~array. We will often refer to each vertex by its
+index in this array, i.e., by its depth. We will call these identifiers \df{vertex
+labels} and we note that each label requires only $\ell=\lceil \log\lceil\log n\rceil\rceil$
+bits. As every tree edge is uniquely identified by its bottom vertex, we can
+use the same encoding for \df{edge labels.}
+
+\em{Slots:} As we are going to need several operations which are not computable
+in constant time on the RAM, we precompute tables for these operations
+like we did in the Q-heaps (cf.~Lemma \ref{qhprecomp}). A~table for word-sized
+arguments would take too much time to precompute, so we will generally store
+our data structures in \df{slots} of $s=\lceil 1/3\cdot\log n\rceil$ bits each.
+We will soon show that it is possible to precompute a~table of any reasonable
+function whose arguments fit in two slots.
+
+\em{Top masks:} The array~$T_e$ will be represented by a~bit mask~$M_e$ called the \df{top mask.} For each
+of the possible tops~$t$ (i.e., the ancestors of the current vertex), we store
+a~single bit telling whether $t\in T_e$. Each top mask fits in $\lceil\log n\rceil$
+bits and therefore in a~single machine word. If needed, it can be split to three slots.
+Unions and intersections of sets of tops then translate to $\band$/$\bor$
+on the top masks.
+
+\em{Small and big lists:} The heaviest edge found so far for each top is stored
+by the algorithm in the array~$P_e$. Instead of keeping the real array,
+we store the labels of these edges in a~list encoded in a~bit string.
+Depending on the size of the list, we use one of two possible encodings:
+\df{Small lists} are stored in a~vector that fits in a~single slot, with
+the unused fields filled by a~special constant, so that we can easily infer the
+length of the list.
+
+If the data do not fit in a~small list, we use a~\df{big list} instead. It
+is stored in $\O(\log\log n)$ words, each of them containing a~slot-sized
+vector. Unlike the small lists, we use the big lists as arrays. If a~top~$t$ of
+depth~$d$ is active, we keep the corresponding entry of~$P_e$ in the $d$-th
+field of the big list. Otherwise, we keep that entry unused.
+
+We want to perform all operations on small lists in constant time,
+but we can afford spending time $\O(\log\log n)$ on every big list. This
+is true because whenever we use a~big list, $\vert T_e\vert = \Omega(\log n/\log\log n)$,
+hence we need $\log\vert T_e\vert = \Omega(\log\log n)$ comparisons anyway.
+
+\em{Pointers:} When we need to construct a~small list containing a~sub-list
+of a~big list, we do not have enough time to see the whole big list. To handle
+this, we introduce \df{pointers} as another kind of edge identifiers.
+A~pointer is an~index to the nearest big list on the path from the small
+list containing the pointer to the root. As each big list has at most $\lceil\log n\rceil$
+fields, the pointer fits in~$\ell$ bits, but we need one extra bit to distinguish
+between regular labels and pointers.
+
+\lemman{Precomputation of tables}
+When~$f$ is a~function of up to two arguments computable in polynomial time, we can
+precompute a~table of the values of~$f$ for all values of arguments that fit
+in a~single slot. The precomputation takes $\O(n)$ time.
+
+\proof
+Similar to the proof of Lemma \ref{qhprecomp}. There are $\O(2^{2s}) = \O(n^{2/3})$
+possible values of arguments, so the precomputation takes time $\O(n^{2/3}\cdot\poly(s))
+= \O(n^{2/3}\cdot\poly(\log n)) = \O(n)$.
+\qed
+
+\example
+As we can afford spending $\O(n)$ time on preprocessing,
+we can assume that we can compute the following functions in constant time:
+
+\itemize\ibull
+\:$\<Weight>(x)$ --- the Hamming weight of a~slot-sized number~$x$
+(we already considered this operation in Algorithm \ref{lsbmsb}, but we needed
+quadratic word size for it). We can easily extend this function to $\log n$-bit numbers
+by splitting the number in three slots and adding their weights.
+
+\:$\<FindKth>(x,k)$ --- the $k$-th set bit from the top of the slot-sized
+number~$x$. Again, this can be extended to multi-slot numbers by calculating
+the \<Weight> of each slot first and then finding the slot containing the
+$k$-th~\1.
+
+\:$\<Bits>(m)$ --- for a~slot-sized bit mask~$m$, it returns a~small list
+of the positions of the bits set in~$\(m)$.
+
+\:$\<Select>(x,m)$ --- constructs a~slot containing the substring of $\(x)$
+selected by the bits set in~$\(m)$.
+
+\:$\<SubList>(x,m)$ --- when~$x$ is a~small list and~$m$ a bit mask, it returns
+a~small list containing the elements of~$x$ selected by the bits set in~$m$.
+\endlist
+
+\para
+We will now show how to perform all parts of the procedure \<FindPeaks>
+in the required time. We will denote the size of the tree by~$n$ and the
+number of query paths by~$q$.
+
+\lemma
+Depths of all vertices and all top masks can be computed in time $\O(n+q)$.
+
+\proof
+Run depth-first search on the tree, assign the depth of a~vertex when entering
+it and construct its top mask when leaving it. The top mask can be obtained
+by $\bor$-ing the masks of its sons, excluding the level of the sons and
+including the tops of all query paths that have their bottoms at the current vertex
+(the depths of the tops are already assigned).
+\qed
+
+\lemma\id{verth}%
+The arrays $T_e$ and~$P_e$ can be indexed in constant time.
+
+\proof
+Indexing~$T_e$ is exactly the operation \<FindKth> applied on the corresponding
+top mask~$M_e$.
+
+If $P_e$ is stored in a~big list, we calculate the index of the particular
+slot and the position of the field inside the slot. This field can be then
+extracted using bit masking and shifts.
+
+If it is a~small list, we extract the field directly, but we have to
+dereference it in case it is a pointer. We modify the recursion in \<FindPeaks>
+to pass the depth of the lowest edge endowed with a~big list and when we
+encounter a~pointer, we index this big list.
+\qed
+
+\lemma\id{verhe}%
+For an~arbitrary active top~$t$, the corresponding entry of~$P_e$ can be
+extracted in constant time.
+
+\proof
+We look up the precomputed depth~$d$ of~$t$ first.
+If $P_e$ is stored in a~big list, we extract the $d$-th entry of the list.
+If the list is small, we find the position of the particular field
+by counting bits of the top mask~$M_e$ at position~$d$ and higher
+(this is \<Weight> of $M_e$ with the lower bits masked out).
+\qed
+
+\lemma\id{verfh}%
+\<FindPeaks> processes an~edge~$e$ in time $\O(\log \vert T_e\vert + q_e)$,
+where $q_e$~is the number of query paths having~$e$ as its bottom edge.
+
+\proof
+The edge is examined in steps 1, 3, 4 and~5 of the algorithm. We will show how to
+perform each of these steps in constant time if $P_e$ is a~small list or
+$\O(\log\log n)$ if it is big.
+
+\em{Step~1} looks up $q_e$~tops in~$P_e$ and we already know from Lemma \ref{verhe}
+how to do that in constant time per top.
+
+\em{Step~3} is trivial as we have already computed the top masks and we can
+reconstruct the entries of~$T_e$ in constant time according to Lemma \ref{verth}.
-\FIXME{Reference to Chazelle.}
+\em{Step~5} involves binary search on~$P_e$ in $\O(\log\vert T_e\vert)$ comparisons,
+each of them indexes~$P_e$, which is $\O(1)$ again by Lemma \ref{verth}. Rewriting the
+lighter edges is $\O(1)$ for small lists by replication and bit masking, for a~big
+list we do the same for each of its slots.
+
+\em{Step~4} is the only non-trivial one. We already know which tops to select
+(we have the top masks $M_e$ and~$M_p$ precomputed), but we have to carefully
+extract the sublist.
+We need to handle these four cases:
+
+\itemize\ibull
+\:\em{Small from small:} We use $\<Select>(T_e,T_p)$ to find the fields of~$P_p$
+that shall be deleted by a~subsequent call to \<SubList>. Pointers
+can be retained as they still refer to the same ancestor list.
+
+\:\em{Big from big:} We can copy the whole~$P_p$, since the layout of the
+big lists is fixed and the items, which we do not want, simply end up as unused
+fields in~$P_e$.
+
+\:\em{Small from big:} We use the operation \<Bits> to construct a~list
+of pointers (we use bit masking to add the ``this is a~pointer'' flags).
+
+\:\em{Big from small:} First we have to dereference the pointers in the
+small list~$S$. For each slot~$B_i$ of the ancestor big list, we construct
+a~subvector of~$S$ containing only the pointers referring to that slot,
+adjusted to be relative to the beginning of the slot (we use \<Compare>
+and \<Replicate> from Algorithm \ref{vecops} and bit masking). Then we
+use a~precomputed table to replace the pointers by the fields of~$B_i$
+they point to. We $\bor$ together the partial results and we again have
+a~small list.
+
+Finally, we have to spread the fields of this small list to the whole big list.
+This is similar: for each slot of the big list, we find the part of the small
+list keeping the fields we want (we call \<Weight> on the sub-words of~$M_e$ before
+and after the intended interval of depths) and we use a~tabulated function
+to shift the fields to the right locations in the slot (controlled by the
+sub-word of~$M_e$ in the intended interval).
+\qeditem
+\endlist
+
+\>We now have all the necessary ingredients to prove the following theorem
+and thus conclude this section:
+
+\thmn{Verification of MST on the RAM}\id{ramverify}%
+There is a~RAM algorithm which for every weighted graph~$G$ and its spanning tree~$T$
+determines whether~$T$ is minimum and finds all $T$-light edges in~$G$ in time $\O(m)$.
+
+\proof
+Implement the Koml\'os's algorithm from Theorem \ref{verify} with the data
+structures developed in this section.
+According to Lemma \ref{verfh}, the algorithm runs in time $\sum_e \O(\log\vert T_e\vert + q_e)
+= \O(\sum_e \log\vert T_e\vert) + \O(\sum_e q_e)$. The second sum is $\O(m)$
+as there are $\O(1)$ query paths per edge, the first sum is $\O(\#\hbox{comparisons})$,
+which is $\O(m)$ by Theorem \ref{verify}.
+\qed
+
+\>In Section \ref{kbestsect}, we will need a~more specialized statement:
+
+\cor\id{rampeaks}%
+There is a~RAM algorithm which for every weighted tree~$T$ and a~set~$P$ of
+paths in~$T$ calculates the peaks of these paths in time $\O(n(T) + \vert P\vert)$.
+
+\paran{Verification on the Pointer Machine}\id{pmverify}%
+Buchsbaum et al.~\cite{buchsbaum:verify} have recently shown that linear-time
+verification can be achieved even on the Pointer Machine. They first solve the
+problem of finding the lowest common ancestors for a~set of pairs of vertices
+by batch processing: They combine an~algorithm of time complexity $\O(m\timesalpha(m,n))$
+based on the Disjoint Set Union data structure with the framework of topological graph
+computations described in Section \ref{bucketsort}. Then they use a~similar
+technique for finding the peaks themselves.
+
+\paran{Online verification}%
+The online version of this problem has turned out to be more difficult. It calls for an~algorithm
+that preprocesses the tree and then answers queries for peaks of paths presented online. Pettie
+\cite{pettie:onlineverify} has proven an~interesting lower bound based on the inverses of the
+Ackermann's function. If we want to answer queries within $t$~comparisons, we
+have to invest $\Omega(n\log\lambda_t(n))$ time into preprocessing.\foot{$\lambda_t(n)$ is the
+$t$-th row inverse of the Ackermann's function, $\alpha(n)$ is its diagonal inverse. See
+\ref{ackerinv} for the exact definitions.} This implies that with
+preprocessing in linear time, the queries require $\Omega(\alpha(n))$ time.
%--------------------------------------------------------------------------------
-%\section{Verification of minimality}
+\section{A randomized algorithm}\id{randmst}%
+
+When we analysed the Contractive Bor\o{u}vka's algorithm in Section~\ref{contalg},
+we observed that while the number of vertices per iteration decreases exponentially,
+the number of edges generally does not, so we spend $\Theta(m)$ time on every phase.
+Karger, Klein and Tarjan \cite{karger:randomized} have overcome this problem by
+combining the Bor\o{u}vka's algorithm with filtering based on random sampling.
+This leads to a~randomized algorithm which runs in linear expected time.
+
+The principle of the filtering is simple: Let us consider any spanning tree~$T$
+of the input graph~$G$. Each edge of~$G$ that is $T$-heavy is the heaviest edge
+of some cycle, so by the Red lemma (\ref{redlemma}) it cannot participate in
+the MST of~$G$. We can therefore discard all $T$-heavy edges and continue with
+finding the MST on the reduced graph. Of course, not all choices of~$T$ are equally
+good, but it will soon turn out that when we take~$T$ as the MST of a~randomly selected
+subgraph, only a~small expected number of edges remains.
+
+Selecting a~subgraph at random will unavoidably produce disconnected subgraphs
+at occasion, so we will drop the implicit assumption that all graphs are
+connected for this section and we will always search for the minimum spanning forest.
+As we already noted (\ref{disconn}), with a~little bit of care our
+algorithms and theorems keep working.
+
+Since we need the MST verification algorithm for finding the $T$-heavy edges,
+we will assume that we are working on the RAM.
+
+\lemman{Random sampling, Karger \cite{karger:sampling}}\id{samplemma}%
+Let $H$~be a~subgraph of~$G$ obtained by including each edge independently
+with probability~$p$. Let further $F$~be the minimum spanning forest of~$H$. Then the
+expected number of $F$-nonheavy\foot{That is, $F$-light edges and also edges of~$F$ itself.}
+edges in~$G$ is at most $n/p$.
+
+\proof
+Let us observe that we can obtain the forest~$F$ by running the Kruskal's algorithm
+(\ref{kruskal}) combined with the random process producing~$H$ from~$G$. We sort all edges of~$G$
+by their weights and we start with an~empty forest~$F$. For each edge, we first
+flip a~biased coin (that gives heads with probability~$p$) and if it comes up
+tails, we discard the edge. Otherwise we perform a~single step of the Kruskal's
+algorithm: We check whether $F+e$ contains a~cycle. If it does, we discard~$e$, otherwise
+we add~$e$ to~$F$. At the end, we have produced the subgraph~$H$ and its MSF~$F$.
+
+When we exchange the check for cycles with flipping the coin, we get an~equivalent
+algorithm which will turn out to be more convenient to analyse:
+\algo
+\:If $F+e$ contains a~cycle, we immediately discard~$e$ (we can flip
+the coin, but we need not to, because the edge will be discarded regardless of
+the outcome). We note that~$e$ is $F$-heavy with respect to both the
+current state of~$F$ and the final MSF.
+\:If $F+e$ is acyclic, we flip the coin:
+\::If it comes up heads, we add~$e$ to~$F$. In this case, $e$~is neither $F$-light
+ nor $F$-heavy.
+\::If it comes up tails, we discard~$e$. Such edges are $F$-light.
+\endalgo
+
+The number of $F$-nonheavy edges is therefore equal to the total number of the coin
+flips in step~2 of this algorithm. We also know that the algorithm stops before
+it adds $n$~edges to~$F$. Therefore it flips at most as many coins as a~simple
+random process that repeatedly flips until it gets~$n$ heads. As waiting for
+every occurrence of heads takes expected time~$1/p$ (the distribution is geometric),
+waiting for~$n$ heads must take $n/p$. This is the bound we wanted to achieve.
+\qed
+
+\para
+We will formulate the algorithm as a~doubly-recursive procedure. It alternatively
+performs steps of the Bor\o{u}vka's algorithm and filtering based on the above lemma.
+The first recursive call computes the MSF of the sampled subgraph, the second one
+finds the MSF of the original graph, but without the heavy edges.
+
+As in all contractive algorithms, we use edge labels to keep track of the
+original locations of the edges in the input graph. For the sake of simplicity,
+we do not mention it in the algorithm explicitly.
+
+\algn{MSF by random sampling --- the KKT algorithm}\id{kkt}%
+\algo
+\algin A~graph $G$ with an~edge comparison oracle.
+\:Remove isolated vertices from~$G$. If no vertices remain, stop and return an~empty forest.
+\:Perform two Bor\o{u}vka steps (iterations of Algorithm \ref{contbor}) on~$G$ and
+ remember the set~$B$ of the edges having been contracted.
+\:Select a~subgraph~$H\subseteq G$ by including each edge independently with
+ probability $1/2$.
+\:$F\=\msf(H)$ calculated recursively.
+\:Construct $G'\subseteq G$ by removing all $F$-heavy edges of~$G$.
+\:$R\=\msf(G')$ calculated recursively.
+\:Return $R\cup B$.
+\algout The minimum spanning forest of~$G$.
+\endalgo
+
+\nota
+Let us analyse the time complexity of this algorithm by studying properties of its \df{recursion tree.}
+This tree describes the subproblems processed by the recursive calls. For any vertex~$v$
+of the tree, we denote the number of vertices and edges of the corresponding subproblem~$G_v$
+by~$n_v$ and~$m_v$ respectively.
+If $m_v>0$, the recursion continues: the left son of~$v$ corresponds to the
+call on the sampled subgraph~$H_v$, the right son to the reduced graph~$G^\prime_v$.
+(Similarly, we use letters subscripted with~$v$ for the state of the other variables
+of the algorithm.)
+The root of the recursion tree is obviously the original graph~$G$, the leaves are
+trivial graphs with no edges.
+
+\obs
+The Bor\o{u}vka steps together with the removal of isolated vertices guarantee that the number
+of vertices drops at least by a~factor of four in every recursive call. The size of a~subproblem~$G_v$
+at level~$i$ is therefore at most $n/4^i$ and the depth of the tree is at most $\lceil\log_4 n\rceil$.
+As there are no more than~$2^i$ subproblems at level~$i$, the sum of all~$n_v$'s
+on that level is at most $n/2^i$, which is at most~$2n$ when summed over the whole tree.
+
+We are going to show that the worst case of the KKT algorithm is not worse than
+of the plain contractive algorithm, while the average case is linear.
+
+\lemma
+For every subproblem~$G_v$, the KKT algorithm spends $\O(m_v+n_v)$ time plus the cost
+of the recursive calls.
+
+\proof
+We know from Lemma \ref{contiter} that each Bor\o{u}vka step takes time $\O(m_v+n_v)$.\foot{We
+need to add $n_v$, because the graph could be disconnected.}
+The selection of the edges of~$H_v$ is straightforward.
+Finding the $F_v$-heavy edges is not, but we have already shown in Theorem \ref{ramverify}
+that linear time is sufficient on the RAM.
+\qed
+
+\thmn{Worst-case complexity of the KKT algorithm}
+The KKT algorithm runs in time $\O(\min(n^2,m\log n))$ in the worst case on the RAM.
+
+\proof
+The argument for the $\O(n^2)$ bound is similar to the analysis of the plain
+contractive algorithm. As every subproblem~$G_v$ is a~simple graph, the number
+of its edges~$m_v$ is less than~$n_v^2$. By the previous lemma, we spend time
+$\O(n_v^2)$ on it. Summing over all subproblems yields $\sum_v \O(n_v^2) =
+\O((\sum_v n_v)^2) = \O(n^2)$.
+
+In order to prove the $\O(m\log n)$ bound, it is sufficient to show that the total time
+spent on every level of the recursion tree is $\O(m)$. Suppose that $v$~is a~vertex
+of the recursion tree with its left son~$\ell$ and right son~$r$. Some edges of~$G_v$
+are removed in the Bor\o{u}vka steps, let us denote their number by~$b_v$.
+The remaining edges fall either to~$G_\ell = H_v$, or to $G_r = G^\prime_v$, or possibly
+to both.
+
+We can observe that the intersection $G_\ell\cap G_r$ cannot be large: The edges of~$H_v$ that
+are not in the forest~$F_v$ are $F_v$-heavy, so they do not end up in~$G_r$. Therefore the
+intersection can contain only the edges of~$F_v$. As there are at most $n_v/4$ such edges,
+we have $m_\ell + m_r + b_v \le m_v + n_v/4$.
+
+On the other hand, the first Bor\o{u}vka step selects at least $n_v/2$ edges,
+so $b_v \ge n_v/2$. The duplication of edges between $G_\ell$ and~$G_r$ is therefore
+compensated by the loss of edges by contraction and $m_\ell + m_r \le m_v$. So the total
+number of edges per level does not decrease and it remains to apply the previous lemma.
+\qed
+
+\thmn{Expected complexity of the KKT algorithm}\id{kktavg}%
+The expected time complexity of the KKT algorithm on the RAM is $\O(m)$.
+
+\proof
+The structure of the recursion tree depends on the random choices taken,
+but as its worst-case depth is at most~$\lceil \log_4 n\rceil$, the tree
+is always a~subtree of the complete binary tree of that depth. We will
+therefore prove the theorem by examining the complete tree, possibly with
+empty subproblems in some vertices.
+
+The left edges of the tree (edges connecting a~parent with its left
+son) form a~set of \df{left paths.} Let us consider the expected time spent on
+a~single left path. When walking the path downwards from its top vertex~$r$,
+the expected size of the subproblems decreases exponentially: for a~son~$\ell$
+of a~vertex~$v$, we have $n_\ell \le n_v/4$ and $\E m_\ell = \E m_v/2$. The
+expected total time spend on the path is therefore $\O(n_r+m_r)$ and it remains
+to sum this over all left paths.
+
+With the exception of the path going from the root of the tree,
+the top~$r$ of a~left path is always a~right son of a~unique parent vertex~$v$.
+Since the subproblem~$G_r$ has been obtained from its parent subproblem~$G_v$
+by filtering out all heavy edges, we can use the Sampling lemma (\ref{samplemma}) to show that
+$\E m_r \le 2n_v$. The sum of the expected sizes of all top subproblems is
+then $\sum_r n_r + m_r \le \sum_v 3n_v = \O(n)$. After adding the exceptional path
+from the root, we get $\O(m+n)=\O(m)$.
+\qed
+\paran{High probability}%
+There is also a~high-probability version of the above theorem. According to
+Karger, Klein and Tarjan \cite{karger:randomized}, the time complexity
+of the algorithm is $\O(m)$ with probability $1-\exp(-\Omega(m))$. The proof
+again follows the recursion tree and it involves applying the Chernoff bound
+\cite{chernoff} to bound the tail probabilities.
+
+\paran{Different sampling}%
+We could also use a~slightly different formulation of the Sampling lemma
+suggested by Chan \cite{chan:backward}. He changes the selection of the subgraph~$H$
+to choosing an~$mp$-edge subset of~$E(G)$ uniformly at random. The proof is then
+a~straightforward application of the backward analysis method. We however preferred
+the Karger's original version, because generating a~random subset of a~given size
+requires an~unbounded number of random bits in the worst case.
+
+\paran{On the Pointer Machine}%
+The only place where we needed the power of the RAM is finding the heavy edges,
+so we can employ the pointer-machine verification algorithm mentioned in \ref{pmverify}
+to bring the results of this section to the~PM.
\endpart