+2014-11-02 Martin Mares <mj@ucw.cz>
+
+ * Device names exported by BIOS are displayed on Linux.
+
+ * On Linux systems, HWDB is used to look up device names
+ when our ID database gives no match. (More precisely,
+ HWDB is consulted after local pci.ids, but before using
+ network to query online pci.ids.) Thanks to Tom Gundersen
+ for the initial patch.
+
+ * Added experimental back-end for OS X / Darwin. Thanks to
+ Richard Yao for providing it.
+
+ * Interrupt Pin and Interrupt Line registers are displayed
+ for bridge devices, too.
+
+ * Several portability bugs have been fixed.
+
+ * Several typos have been fixed. Also, use of questionable
+ constructs in man pages has been reduced.
+
+ * PCIe link capabilities now include the ASPMOptComp bit.
+
+ * The "CRS Software Visibility" bit is now decoded properly.
+
+ * Updated pci.ids to the current snapshot of the database.
+
+2013-11-10 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.2.1.
+
+ * CardBus bridge capabilities are displayed.
+
+ * PCIe L1 PM substates are decoded.
+
+ * Various bugs were fixed in decoding of PCIe capabilities.
+
+ * The sysfs back-end does not spit out unnecessary warnings when
+ empty slots report only a partial device address. This actually
+ happens on IBM pSeries.
+
+ * Updated pci.ids to the today's snapshot of the database.
+
+2013-04-19 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.2.0.
+
+ * On newer Linux systems, we use libkmod to look up kernel modules
+ (modules.pcimap no longer exists). To facilitate this, libpci
+ is able to look up module aliases in sysfs.
+
+ * Various minor bug fixes.
+
+ * Updated pci.ids to the today's snapshot of the database.
+
+2012-06-25 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.1.10.
+
+ * Decoding of LTR/OBFF in PCIe capabilities.
+
+ * Various minor bug fixes.
+
+ * Updated pci.ids to the today's snapshot of the database.
+
+2012-01-14 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.1.9.
+
+ * Updated README.
+
+ * Wherever we mention the PCI ID database, we now refer to
+ http://pci-ids.ucw.cz/ and the sf.net site is mentioned only
+ as a mirror. This includes update-pciids.
+
+ * Decode PCIe Gen 3 speeds and link status fields.
+
+ * Various minor bug fixes.
+
+ * Updated pci.ids to the today's snapshot of the database.
+
+2011-10-02 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.1.8.
+
+ * More capabilities: Transaction Processing Hints, Latency Tolerance
+ Reporting. Thanks to Jesse Barnes.
+
+ * Added BeOS and Haiku ports. Contributed by Francois Revol.
+
+ * pciutils.pc now uses Libs.private properly.
+
+ * When we format a name and it does not fit in the buffer, we truncate
+ it instead of returning "buffer too small" instead. This works on all
+ platforms with sane (i.e., C99-compatible) snprintf().
+
+ * Various minor bug fixes.
+
+ * Updated pci.ids to the today's snapshot of the database.
+
+2010-01-31 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.1.7.
+
+ * Minor improvements and bug fixes in decoding of the Virtual Channel
+ capability.
+
+2010-01-24 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.1.6.
+
+ * More capabilities decoded: Virtual Channel (except arbitration
+ tables), Root Complex Link, Vendor-Specific (header only), SATA HBA.
+
+ * All extended capabilities have their version displayed (-vv or more).
+
+2010-01-19 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.1.5.
+
+ * Updated pci.ids to the today's snapshot of the database.
+
+ * When scanning extended capabilities, properly mask the lowest 2 bits,
+ which are currently reserved. This avoids unaligned access errors on
+ broken hardware (see tests/broken-ecaps).
+
+ * Large bar sizes are displayed in human-readable format (with units).
+ Thanks to Matthew Wilcox.
+
+ * Physical slot information is displayed correctly for multi-function cards.
+ Fixed by Matthew Wilcox.
+
+ * Fixed a couple of typos everywhere.
+
+ * Library: Fixed bugs in freeing of capabilities.
+
+ * Windows back-end compiles again.
+
+2009-08-14 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.1.4.
+ (sorry that I have missed 22/7 and released it later :-))
+
+ * Updated pci.ids to the today's snapshot of the database.
+
+ * Fixed memory and file descriptor leak in the dump back-end.
+
+ * The SR-IOV capability decoder now prints the VF BAR's.
+ Patch by Chris Wright, cleaned up by me.
+
+ * On request of certain company's lawyers, we now include a copy
+ of the GPL with our package. It seems that the pciutils are getting
+ mature if the most important bug of the month was this one ;-)
+
+2009-07-04 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.1.3.
+
+ * Updated pci.ids to the current snapshot of the database.
+
+ * The VPD parser now reports unknown and vendor-defined items
+ properly. It also stops on any item in unknown format, avoiding long
+ output on bogus VPD data. Thanks to Ben Hutchings and Matthew Wilcox.
+
+ * The MSI-X table size now matches the spec. Thanks to Michael S.
+ Tsirkin.
+
+ * The Power Management capability now includes the soft reset bit.
+ Thanks to Yu Zhao.
+
+ * Decoding of the Advanced Features capability has been added.
+ Thanks to Yu Zhao.
+
+ * The whole package compiles on GNU/kFreeBSD again.
+
+ The following patches have been contributed by Matthew Wilcox:
+
+ * The procfs back-end is able to cope with /proc/bus/pci
+ containing names with domains, which occur on sparc64 and
+ possibly other architectures due to a kernel bug.
+
+ * The sysfs back-end no longer complains when a slot address
+ is missing, which happens with old versions of Linux fakephp.
+
+ * The Device Serial Number capability is printed in the right
+ byte order.
+
+ * The MSI and MSI-X capabilities are printed in a prettier way.
+
+ * The tree output mode (`lspci -t') shows domain numbers only
+ at the root, which makes the output more compact.
+
+ * Updated documentation on the bus mapping mode (`lspci -M').
+
+2009-02-01 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.1.2.
+
+ * Fixed another silly bug in the command-line parser of setpci.
+
+2009-01-30 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.1.1.
+
+ * Updated pci.ids to the current snapshot of the database.
+
+ * The configure script now sets LC_ALL to avoid being fooled by
+ locale-dependent behavior of `tr'.
+
+ * The command-line parser of setpci did sometimes segfault on invalid
+ input. Thanks to Andreas Wiese for a fix.
+
+2009-01-18 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.1.0.
+
+ * Updated pci.ids to the current snapshot of the database.
+
+ * The Cygwin backend now works on Windows Vista. Thanks to Jonathan
+ Kotta.
+
+ * Fixed a bug in decoding of the SR-IOV capability. Patch by Yu Zhao.
+
+ * Details of some PCIe capabilities are displayed only with -vv.
+
+ * When a BAR is reported by the OS, but not by the device (i.e.,
+ it is marked as [virtual] in lspci), the [disabled] flag is
+ suppressed, because it does not make sense in such cases.
+ Patch by Yu Zhao.
+
+2008-12-13 Martin Mares <mj@ucw.cz>
+
+ * The source code of lspci has been split to multiple files, hopefully
+ making it easier to maintain.
+
+ * The library and lspci now know about physical slot names. So far,
+ they are provided by the sysfs back-end only. Thanks go to Alex Chiang.
+
+ * When a device has the VPD (Vital Product Data) capability and the
+ VPD data are supplied by the OS, they are decoded and printed in the
+ verbose mode. This currently works only on Linux with the sysfs
+ back-end. Thanks to Ben Hutchings of Solarflare for the patch.
+
+ * `setpci --version' now works properly.
+
+ * `setpci --dumpregs' prints a table of all known names of
+ registers and capabilities. This replaces the table of registers
+ in the setpci man page.
+
+ * The dry-run mode of setpci gives better feedback.
+
+ * The setpci utility is now able to address registers stored in PCI
+ capabilities (actually it allows a more general form of relative
+ addressing).
+
+ * The library has gained functions for working with PCI capabilities.
+
+ * Address Translation Services capability is now decoded. Patch by
+ Yu Zhao.
+
+2008-11-09 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.0.3.
+
+ * `lspci -k' now displays the subsystem ID, too. This makes `-k'
+ show everything needed to identify the device and the available
+ drivers, which was called for by many users.
+
+ * Fixed spelling of MSI. Patch by Matthew Wilcox.
+
+ * Better support for cross-compilation. Thanks to Alon Bar-Lev
+ for the patch.
+
+ * Fixed printing of the AER capability. Patch by Max Asbock.
+
+ * HT 1.02 capabilities are decoded as HT 1.03. Suggested by
+ Carl-Daniel Hailfinger.
+
+ * Fixed Cygwin build. Thanks to Steve Elliott for reporting the bug.
+
+ * Updated pci.ids to the current snapshot of the database.
+
+2008-09-19 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.0.2.
+
+ * Fixed a minor bug in the configure script, which caused warnings
+ about redefinition of symbols during compilation.
+
+2008-09-11 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.0.1.
+
+ * Updated pci.ids to the most recent snapshot.
+
+ * Added a Cygwin port. Patch by Christopher Voltz, ported to the
+ current tree by Martin Mares.
+
+ * Worked around compatibility problems with various default settings
+ of wget (we have to set --no-timestamping explicitly). Thanks to Ville
+ Skytta for pointing that out.
+
+ * Fixed printing of MSI capabilities. Thanks to Matthew Wilcox for
+ a patch.
+
+ * Added decoding of several PCI-X capabilities: device/link/slot 2,
+ Advanced Error Reporting, Access Control Services, Alternative Routing-ID,
+ Single Root I/O Virtualization. Thanks to Yu Zhao for patches.
+
+ * Fixed bug in filters which caused them to refuse vendor/device ID 0xffff.
+
+ * README: The linux-pci mailing list has moved to linux-pci@vger.kernel.org.
+
+ * Fixed several build problems: builds without PCI_USE_DNS on Linux
+ and with PCI_USE_DNS on Solaris and *BSD. Static library mode also
+ compiles again on old versions of GCC.
+
+2008-04-10 Martin Mares <mj@ucw.cz>
+
+ * Released as 3.0.0.
+
+ * Updated API and ABI version.
+
+2008-02-20 Martin Mares <mj@ucw.cz>
+
+ * Released as 2.99.1-alpha2.
+
+ * Changed the default domain for the DNS resolver.
+
+2008-02-18 Martin Mares <mj@ucw.cz>
+
+ * Released as 2.99.1-alpha1.
+
+ * The makefile system has been reworked. All configuration settings
+ are now passed to the configure script in environment variables,
+ allowing for easy tweaking in the top-level Makefile. All control
+ knobs are now described in the README.
+
+ * The libpci can be built as a shared library with properly restricted
+ symbol exports. Use `make SHARED=yes' to enable that or `make SHARED=local'
+ for a local testing build (with hardwired paths to the library, so that
+ it does not need installation).
+
+ * The example program has been moved from lib/example.c to the top-level
+ directory, because it should be built exactly as the other utilities
+ are. It has been also improved slightly to educate better.
+
+ * The i386-ports method is enabled on Linux/x86_64 as well.
+
+2008-02-13 Martin Mares <mj@ucw.cz>
+
+ * Released as 2.2.10-net2.
+
+ * Support for resolving of PCI ID's using DNS together with a local
+ cache of resolved entries has been added. See the `-q' and `-Q' options
+ of lspci.
+
+ * The library now has a generic system of settable parameters, which
+ also include settings of the DNS resolver and cache. An `-O' option
+ has been added to lspci and setpci to allow setting of these options.
+
+ * Configuration of the access methods are now specified by the new
+ parameter system, replacing the pci_access->method_params array.
+
+ * Access methods now also have sensible names and help texts and it
+ is possible to look up method ID by a name.
+
+ * An `-A' switch has been added to both lspci and setpci, allowing to
+ select an arbitrary access method. The `-P' switch (configure proc
+ backend) has been removed as it is no longer needed and I do not know
+ any its user.
+
+ * Several source files have been split for better maintainability
+ (most notably the resolving of ID's).
+
+ * Man pages and help texts have been updated. A new man page `pcilib(7)'
+ has been added and description of library options has been moved there.
+
+ * When an unknown device ID is encountered, we print `Device <id>'
+ instead of `Unknown device <id>'. It uses less space and it also
+ should reduce the number of inexperienced users complaining that
+ the device is not supported by the OS. To lookup up OS drivers,
+ use the `-k' option.
+
+ * PCI_LIB_VERSION has been bumped to 0x020299.
+
+ * Makefile: stripping of the binaries during installation can be
+ overridden by the STRIP variable.
+
+ * lib/types.h: We use the integer types from <stdint.h> if the
+ compiler claims C99 support.
+
+2008-02-11 Martin Mares <mj@ucw.cz>
+
+ * Released as 2.2.10.
+
+ * lspci.c, setpci.c: Cleaned up the list of options.
+
+ * lib/names.c: Fix displaying of errors reported by zlib.
+ Previously, the buffer containing the error message had
+ been deallocated by gzclose() before the message was printed.
+
+2008-01-07 Martin Mares <mj@ucw.cz>
+
+ * update-pciids.sh: Added quiet mode (-q). Clean up uncompressed
+ files left by previous versions of the pciutils. Patch by Mike
+ Frysinger.
+
+ * update-pciids.man: Mention the -q switch.
+
+2007-11-29 Martin Mares <mj@ucw.cz>
+
+ * lib/dump.c: Squashed compiler warnings about code with
+ no effect (there really were surplus *'s).
+
2007-11-06 Martin Mares <mj@ucw.cz>
+ * Released as 2.2.9.
+
* lspci.c: Added a new switch `-k' which requests printing
of information on kernel drivers attached to each device
and on kernel modules reporting the ability to handle the