+Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * Released as version 2.1.
+
+ * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
+ lots of contributed entries.
+
+Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
+
+ * pci.ids: Added lots of subsystem definitions.
+
+Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * setpci.man: Better example.
+
+ * lspci.c: Resolve prog-if names.
+
+ * lib/names.c: Adapted to new pci.ids syntax.
+
+ * pci.ids: Reorganized the pci.ids file. Subsystems are listed
+ under devices, classes can optionally contain prog-if information.
+ New ID's, as usually.
+
+Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * pci.ids: New ID's. As usually.
+
+ * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
+ unless we're vvvery verbose.
+
+Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
+
+Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * pci.ids: New ID's. Again.
+
+Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * lspci.c (show_size): Don't show size if it's zero (usually
+ due to bus-centric mode being enabled).
+
+Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * lib/pci.h: Types are OS dependent.
+
+ * lib/internal.h: Byte order hacks are OS dependent.
+
+ * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
+
+ * lib/Makefile, lib/access.c: Added fbsd-device target.
+
+ * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
+ incorrectly set to device ID.
+
+ * README: Added a note that we support FreeBSD.
+
+ * Makefile (PREFIX, ROOT): Set it depending on the OS.
+ (%.8): Grrr, BSD date is not able to convert date formats the same way
+ as GNU date does. Use sed instead.
+ (install): Use `-c' when calling install.
+
+ * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
+ by Jari Kirma <kirma@cs.hut.fi>.
+
+ * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
+ and pwrite only when we are certain it's safe (i.e., glibc 2.1
+ on all architectures or any libc on a i386 where we really know
+ how to use syscalls directly). In all other cases, emulate it
+ with lseek/read/write.
+
+ * pci.ids: Some more IDs.
+
+Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * pci.ids: Added IDs of parallel port controller cards as sent
+ by Tim Waugh <tim@cyberelk.demon.co.uk>.
+
+Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
+
+ * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
+ HAVE_LONG_ADDRESS.
+
+ * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
+ are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
+ to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
+ and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
+ on Alpha.
+
+ * lspci.c (show_msi): Added dumping of the MSI capability.
+ (show_slotid): The same for SlotID capability.
+ (show_caps): Seperated capability dumping, because it should
+ be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
+ layout of htype2, so I'm a bit unsure about it wrt capabilities
+ -- they at least have to live somewhere else since address 0x34
+ is already defined differently in htype2.
+
+ * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
+ (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
+ (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
+
+ * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
+ (required by the PCI 2.2 specs).
+
+Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * lspci.c (show_size): Added new function for dumping of region sizes.
+ (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
+ ROMs et cetera.
+
+ * lib/pci.h (struct pci_dev): known_fields moved to the public part
+ of the structure.
+
+ * Added support for region sizes. Needs support in the kernel, because
+ sizes have to be scanned before drivers initialize yourself. pci_fill_info()
+ now returns a bitmask of what fields were really read.
+
+Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
+
+ * Makefile:
+ Added `uninstall' target - removes all traces of pciutils.
+ * pci.ids:
+ - Lots of cleanups in the ATI, S3, Adaptec vendors.
+ - Changed Compaq QVision 1280/p definitions, as it's not possible
+ to determine the revision from the device ID.
+ - Same for the Tseng ET4000.
+ The id's said I had a rev C, when it was actually a rev B.
+ - Removed some unnecessary strings
+ `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
+ `Ethernet card'. This should be determined from config space.
+ - Lots of other new vendors & devices
+ - Other additional small cleanups.
+
+Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * lib/names.c (pci_lookup_name): When device ID lookup
+ fails, return hexadecimal device ID instead of vendor ID.
+ Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
+ I've just extended the fix to subsystem ID's.
+
+Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * lspci.c (show_agp): Bug fix from Petr Vandrovec
+ <vandrove@vc.cvut.cz>. The command register was displayed
+ incorrectly.
+
+Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
+ numbers if not supplied by the libc.
+
+Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * Released the whole package as version 2.0.
+
+Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
+
+ * pci.ids: Added several new ID's contributed by people
+ on the linux-pci list.
+
Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
* lspci.c: Display I/O addresses correctly on sparc64.
projects / pciutils.git / blobdiff