]> mj.ucw.cz Git - pciutils.git/blobdiff - ChangeLog
Merge with git+ssh://git.ucw.cz/home/mj/GIT/pciutils.git
[pciutils.git] / ChangeLog
index 00bafa4b5bc601459395fa41049eed3fd06cef8e..35cb5db97d251d4f895adcc6c7ed7f8d537f1887 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,187 @@
+2008-02-11  Martin Mares <mj@ucw.cz>
+
+       * lib/names.c: Fix displaying of errors reported by zlib.
+       Previously, the buffer containing the error message had
+       been deallocated by gzclose() before the message was printed.
+
+2008-01-07  Martin Mares <mj@ucw.cz>
+
+       * update-pciids.sh: Added quiet mode (-q). Clean up uncompressed
+       files left by previous versions of the pciutils. Patch by Mike
+       Frysinger.
+
+       * update-pciids.man: Mention the -q switch.
+
+2007-11-29  Martin Mares <mj@ucw.cz>
+
+       * lib/dump.c: Squashed compiler warnings about code with
+       no effect (there really were surplus *'s).
+
+2007-11-06  Martin Mares <mj@ucw.cz>
+
+       * Released as 2.2.9.
+
+       * lspci.c: Added a new switch `-k' which requests printing
+       of information on kernel drivers attached to each device
+       and on kernel modules reporting the ability to handle the
+       device. So far, this is supported only on Linux with the
+       sysfs back-end, so it is implemented internally in the lspci
+       instead of the libpci. Thanks to Anicka <anicka@anicka.net>
+       for help.
+
+2007-10-19  Martin Mares <mj@ucw.cz>
+
+       * Makefile, lib/Makefile: Moved -lz from LDFLAGS to LDLIBS.
+       Also added an explicit pattern rule for linking to make sure
+       that LDLIBS is used on all platforms. Thanks to Dan Nicholson
+       for the suggestion.
+
+2007-10-19  Martin Mares <mj@ucw.cz>
+
+       * Released as 2.2.8.
+
+       * pci.ids: Revised class codes to match Conventional PCI 3.0 specs.
+       Added a couple of new ones, renumbered `ADMA continuous operation'
+       prog-if to 0x30 (even the old SATA Class Code ECN doesn't mention
+       0x40) and renumbered the satellite communication controllers.
+
+       * lib/header.h: Include `PCI hot-plug' and `Secure device'
+       capabilities from PCI 3.0 specs. Also added `SATA HBA' and
+       `Advanced features' caps from various ECN's.
+
+       * lspci.c: All known capabilities have at least their name displayed
+       now. When we are unable to decode them completely, we signalize it
+       with a `<?>' mark.
+
+       * lspci.man: Document `<?>' and also mention that extended config
+       space is currently available only with the linux_sysfs back-end.
+
+       * lspci.c: Decode the Debug port capability (per EHCI 0.96 spec).
+
+       * lspci.c: Big code cleanup: re-arranged functions in the code,
+       renamed everything related to capabilities to cap_* and
+       all options except verbose to opt_*.
+
+2007-10-14  Martin Mares <mj@ucw.cz>
+
+       * lib/[fno]bsd-*: Removed extraneous braces.
+
+2007-10-12  Martin Mares <mj@ucw.cz>
+
+       * Capability loop detection introduced 2.2.7 did not work
+         properly with extended capabilities. Fixed.
+
+2007-10-05  Martin Mares <mj@ucw.cz>
+
+       * Released as 2.2.7.
+
+       * lspci.c (show_caps, show_ext_caps): Detect and report loops in
+       capability lists.
+
+       * lspci.c, lib/header.h: Finished decoding of the PCI Express
+       capability. The extended capabilities remain undecoded for now,
+       but at least the list of them has been updated to reflect the
+       current PCI Express 2.0 spec.
+
+       * lspci.c, lib/header.h: Decode new bits of traditional registers
+       as defined by PCIE / PCI-X. This includes discard timers in the bridge
+       control register and INTx enable/status in device control/status
+       registers.
+
+       * lib/fbsd-device.c: Support domains on new FreeBSD's. Contributed
+       by Marius Strobl.
+
+2007-09-12  Hasso Tepper <hasso@estpak.ee>
+
+       * Extended the fbsd-device backend to run on Dragonfly BSD.
+
+       * lspci.c: alloca() is declared in <stdlib.h> on BSD's, not <alloca.h>.
+
+2007-09-03  Martin Mares <mj@ucw.cz>
+
+       * Resurrected the Windows port, including cross-compilation by MinGW.
+       Patch by Samuel Bronson <naesten@gmail.com>.
+
+2007-08-31  Martin Mares <mj@ucw.cz>
+
+       * Makefile, lib/Makefile: `ar' and `ranlib' can be overriden to allow
+       cross-compilation.
+
+2007-08-27  Martin Mares  <mj@ucw.cz>
+
+       * lib/names.c (pci_open): When calling gzopen(), use "rb" file mode
+       instead of "r". This is needed on DOS systems, where this function
+       somewhat illogically uses the binary flag for the compressed file
+       instead of the decompressed stream inside, where binariness really
+       matters.
+
+2007-08-14  Martin Mares  <mj@ucw.cz>
+
+       * lspci.c (show_ht): Added decoding of Hypertransport MSI mapping capability,
+       based on a patch by Jason Gunthorpe.
+
+       * tests/cap-MSI-mapping: Added a test case. I plan to add test cases
+       (which are dumps of config space) for all new features.
+
+2007-06-20  Martin Mares  <mj@ucw.cz>
+
+       * Released as 2.2.6.
+
+       * Makefile: Added an "install-lib" target. Thanks to Dan Nicholson
+       for a patch.
+
+       * Makefile, lib/Makefile: Generate and install pkg-config file
+       for libpci. Again by Dan Nicholson.
+
+2007-06-20  Thomas Schwinge  <tschwinge@gnu.org>
+
+       * lib/i386-io-hurd.h: Rewritten for new Hurd kernels.
+
+2007-05-04  Martin Mares  <mj@ucw.cz>
+
+       * Released as 2.2.5.
+
+       * pci.ids: Updated to the current snapshot of the database.
+
+2007-02-14  Martin Mares  <mj@ucw.cz>
+
+       * lspci.c (show_express): Added PCI/PCI-X to PCI-Express Bridge type.
+       Patch by Mark Glines.
+
+>>>>>>> main
+2007-02-09  Martin Mares  <mj@ucw.cz>
+
+       * pci.ids: Updated to the current snapshot of the database.
+
+2007-02-06  Martin Mares  <mj@ucw.cz>
+
+       * Replaced bzero() by memset() everywhere, it's better to lose a tiny
+       bit of readability than maintain hacks to make it work on various systems.
+
+       * lib/configure: tr on Solaris is a bit weird and it requires `[A-Z]'
+       instead of `A-Z'. Fortunately, the extra brackets don't hurt otherwise.
+
+       * lib/types.h, lib/configure: Solaris should use <stdint.h> to get precise
+       integer types.
+
+2007-02-04  Martin Mares  <mj@ucw.cz>
+
+       * lspci.c: alloca() needs <alloca.h>.
+
+2006-09-17  Martin Mares  <mj@ucw.cz>
+
+       * lib/dump.c: Fixed a couple of bugs in the dump backend which caused
+       devices with domains or with extended config space to be read incorrectly.
+       Also, dumps with partial lines are allowed now.
+
+2006-09-10  Martin Mares  <mj@ucw.cz>
+
+       * pci.ids: Updated to the current database snapshot.
+
+       * lspci.c (scan_device): If an error occurs when reading the standard config
+       header of a device, report it and ignore the device and return with exit
+       code 2 at the end.
+
 2006-09-09  Martin Mares  <mj@ucw.cz>
 
        * Released as 2.2.4.