lib/configure

   1 #!/bin/sh
   2 # Configuration script for the PCI library
   3 # (c) 1998--2013 Martin Mares <mj@ucw.cz>
   4
   5 LC_ALL=C
   6 export LC_ALL
   7
   8 echo_n() {
   9         printf '%s' "$*"
  10 }
  11
  12 if [ -z "$VERSION" -o -z "$IDSDIR" ] ; then
  13         echo >&2 "Please run the configure script from the top-level Makefile"
  14         exit 1
  15 fi
  16
  17 echo_n "Configuring libpci for your system..."
  18 if [ -z "$HOST" ] ; then
  19         sys=`uname -s`
  20         rel=`uname -r`
  21         realsys="$sys"
  22         if [ "$sys" = "AIX" -a -x /usr/bin/oslevel -a -x /usr/sbin/lsattr ]
  23         then
  24                 rel=`/usr/bin/oslevel`
  25                 proc=`/usr/sbin/lsdev -C -c processor -S available -F name | head -1`
  26                 cpu=`/usr/sbin/lsattr -F value -l $proc -a type | sed 's/_.*//'`
  27         else
  28                 cpu=`uname -m | sed 's/^i.86$/i386/;s/^sun4u$/sparc64/;s/^i86pc$/i386/;s/^BePC$/i386/;s/^BeMac$/powerpc/;s/^BeBox$/powerpc/'`
  29         fi
  30         if [ "$sys" = "GNU/kFreeBSD" -o "$sys" = "DragonFly" ]
  31         then
  32                 sys=freebsd
  33         fi
  34         if [ "$sys" = "CYGWIN_NT-5.1" -o "$sys" = "CYGWIN_NT-6.0" ]
  35         then
  36                 sys=cygwin
  37         fi
  38         HOST=${3:-$cpu-$sys}
  39 fi
  40 [ -n "$RELEASE" ] && rel="${RELEASE}"
  41 # CAVEAT: tr on Solaris is a bit weird and the extra [] is otherwise harmless.
  42 host=`echo $HOST | sed -e 's/^\([^-]*\)-\([^-]*\)-\([^-]*\)-\([^-]*\)$/\1-\3/' -e 's/^\([^-]*\)-\([^-]*\)-\([^-]*\)$/\1-\2/' -e 's/^\([^-]*\)-\([^-]*\)$/\1--\2/' | tr '[A-Z]' '[a-z]'`
  43 cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
  44 sys=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
  45 echo " $host $rel $cpu $sys"
  46
  47 c=config.h
  48 m=config.mk
  49 echo >$c '#define PCI_CONFIG_H'
  50 echo >>$c "#define PCI_ARCH_`echo $cpu | tr '[a-z]' '[A-Z]'`"
  51 echo >>$c "#define PCI_OS_`echo $sys | tr '[a-z]' '[A-Z]'`"
  52 echo >$m 'WITH_LIBS='
  53
  54 echo_n "Looking for access methods..."
  55 LIBRESOLV=-lresolv
  56 LIBEXT=so
  57
  58 case $sys in
  59         linux*)
  60                 echo_n " sysfs proc"
  61                 echo >>$c '#define PCI_HAVE_PM_LINUX_SYSFS'
  62                 echo >>$c '#define PCI_HAVE_PM_LINUX_PROC'
  63                 echo >>$c '#define PCI_HAVE_LINUX_BYTEORDER_H'
  64                 echo >>$c '#define PCI_PATH_PROC_BUS_PCI "/proc/bus/pci"'
  65                 echo >>$c '#define PCI_PATH_SYS_BUS_PCI "/sys/bus/pci"'
  66                 case $cpu in
  67                                 i?86|x86_64)    echo_n " i386-ports"
  68                                                 echo >>$c '#define PCI_HAVE_PM_INTEL_CONF'
  69                                                 ;;
  70                 esac
  71                 echo >>$c '#define PCI_HAVE_64BIT_ADDRESS'
  72                 ;;
  73         sunos)
  74                 case $cpu in
  75                                 i?86)           echo_n " i386-ports"
  76                                                 echo >>$c "#define PCI_HAVE_PM_INTEL_CONF"
  77                                                 ;;
  78                                 *)
  79                                                 echo " The PCI library does not support Solaris for this architecture: $cpu"
  80                                                 exit 1
  81                                                 ;;
  82                 esac
  83                 echo >>$c '#define PCI_HAVE_STDINT_H'
  84                 ;;
  85         freebsd*)
  86                 echo_n " fbsd-device"
  87                 echo >>$c '#define PCI_HAVE_PM_FBSD_DEVICE'
  88                 echo >>$c '#define PCI_PATH_FBSD_DEVICE "/dev/pci"'
  89                 if [ "$realsys" != "GNU/kFreeBSD" ] ; then
  90                         LIBRESOLV=
  91                 fi
  92                 ;;
  93         openbsd)
  94                 echo_n " obsd-device"
  95                 echo >>$c '#define PCI_HAVE_PM_OBSD_DEVICE'
  96                 echo >>$c '#define PCI_PATH_OBSD_DEVICE "/dev/pci"'
  97                 LIBRESOLV=
  98                 ;;
  99
 100         darwin*)
 101                 echo_n " darwin"
 102                 echo >>$c '#define PCI_HAVE_PM_DARWIN_DEVICE'
 103                 echo >>$m 'WITH_LIBS+=-lresolv -framework CoreFoundation -framework IOKit'
 104                 echo >>$c '#define PCI_HAVE_64BIT_ADDRESS'
 105                 LIBRESOLV=
 106                 LIBEXT=dylib
 107                 ;;
 108         aix)
 109                 echo_n " aix-device"
 110                 echo >>$c '#define PCI_HAVE_PM_AIX_DEVICE'
 111                 echo >>$m 'CFLAGS=-g'
 112                 echo >>$m 'INSTALL=installbsd'
 113                 echo >>$m 'DIRINSTALL=mkdir -p'
 114                 ;;
 115         netbsd)
 116                 echo_n " nbsd-libpci"
 117                 echo >>$c '#define PCI_HAVE_PM_NBSD_LIBPCI'
 118                 echo >>$c '#define PCI_PATH_NBSD_DEVICE "/dev/pci0"'
 119                 echo >>$c '#define PCI_HAVE_64BIT_ADDRESS'
 120                 echo >>$m 'LIBNAME=libpciutils'
 121                 echo >>$m 'WITH_LIBS+=-lpci'
 122                 LIBRESOLV=
 123                 ;;
 124         gnu)
 125                 echo_n " i386-ports"
 126                 echo >>$c '#define PCI_HAVE_PM_INTEL_CONF'
 127                 ;;
 128         djgpp)
 129                 echo_n " i386-ports"
 130                 echo >>$c '#define PCI_HAVE_PM_INTEL_CONF'
 131                 ;;
 132         cygwin)
 133                 echo_n " i386-ports"
 134                 echo >>$c '#define PCI_HAVE_PM_INTEL_CONF'
 135                 echo >>$m 'WITH_LIBS+=-lioperm'
 136                 ;;
 137         beos|haiku)
 138                 case $cpu in
 139                                 i?86|x86_64)    echo_n " i386-ports"
 140                                                 echo >>$c '#define PCI_HAVE_PM_INTEL_CONF'
 141                                                 ;;
 142                 esac
 143                 echo >>$c '#define PCI_HAVE_STDINT_H'
 144                 ;;
 145         sylixos)
 146                 echo >>$c '#define PCI_PATH_SYLIXOS_DEVICE "/proc/pci"'
 147                 echo >>$c '#define PCI_HAVE_64BIT_ADDRESS'
 148                 echo >>$c '#define PCI_HAVE_PM_SYLIXOS_DEVICE'
 149                 IDSDIR="/etc/pci"
 150                 LIBRESOLV=
 151                 ;;
 152         *)
 153                 echo " Unfortunately, your OS is not supported by the PCI Library"
 154                 exit 1
 155                 ;;
 156 esac
 157
 158 echo >>$m "LIBEXT="$LIBEXT
 159 echo >>$c '#define PCI_HAVE_PM_DUMP'
 160 echo " dump"
 161
 162 echo_n "Checking for zlib support... "
 163 if [ "$ZLIB" = yes -o "$ZLIB" = no ] ; then
 164         echo "$ZLIB (set manually)"
 165 else
 166         if [ -f /usr/include/zlib.h -o -f /usr/local/include/zlib.h ] ; then
 167                 ZLIB=yes
 168         else
 169                 ZLIB=no
 170         fi
 171         echo "$ZLIB (auto-detected)"
 172 fi
 173 if [ "$ZLIB" = yes ] ; then
 174         echo >>$c '#define PCI_COMPRESSED_IDS'
 175         echo >>$c '#define PCI_IDS "pci.ids.gz"'
 176         echo >>$m 'LIBZ=-lz'
 177         echo >>$m 'WITH_LIBS+=$(LIBZ)'
 178 else
 179         echo >>$c '#define PCI_IDS "pci.ids"'
 180 fi
 181 echo >>$c "#define PCI_PATH_IDS_DIR \"$IDSDIR\""
 182
 183 echo_n "Checking for DNS support... "
 184 if [ "$DNS" = yes -o "$DNS" = no ] ; then
 185         echo "$DNS (set manually)"
 186 else
 187         if [ -f /usr/include/resolv.h ] ; then
 188                 DNS=yes
 189         else
 190                 DNS=no
 191         fi
 192         echo "$DNS (auto-detected)"
 193 fi
 194 if [ "$DNS" = yes ] ; then
 195         echo >>$c "#define PCI_USE_DNS"
 196         echo >>$c "#define PCI_ID_DOMAIN \"pci.id.ucw.cz\""
 197         echo >>$m "WITH_LIBS+=$LIBRESOLV"
 198 fi
 199
 200 if [ "$sys" = linux ] ; then
 201         echo_n "Checking for libkmod... "
 202         LIBKMOD_DETECTED=
 203         if [ -z "$PKG_CONFIG" ] ; then
 204                 PKG_CONFIG=pkg-config
 205         fi
 206         if [ "$LIBKMOD" != no ] ; then
 207                 if ! which $PKG_CONFIG >/dev/null ; then
 208                         echo_n "($PKG_CONFIG not found) "
 209                 elif $PKG_CONFIG libkmod ; then
 210                         LIBKMOD_DETECTED=1
 211                 fi
 212         fi
 213         if [ "$LIBKMOD" = yes -o "$LIBKMOD" = no ] ; then
 214                 echo "$LIBKMOD (set manually)"
 215                 if [ "$LIBKMOD" = yes -a -z "$LIBKMOD_DETECTED" ] ; then
 216                         echo "Requested use of libkmod, but it is not available. Giving up."
 217                         exit 1
 218                 fi
 219         else
 220                 if [ -n "$LIBKMOD_DETECTED" ] ; then
 221                         LIBKMOD=yes
 222                 else
 223                         LIBKMOD=no
 224                 fi
 225                 echo "$LIBKMOD (auto-detected)"
 226         fi
 227         if [ "$LIBKMOD" = yes ] ; then
 228                 echo >>$c "#define PCI_USE_LIBKMOD"
 229                 echo >>$m "LIBKMOD_CFLAGS=$($PKG_CONFIG --cflags libkmod)"
 230                 echo >>$m "LIBKMOD_LIBS=$($PKG_CONFIG --libs libkmod)"
 231         fi
 232
 233         echo_n "Checking for udev hwdb support... "
 234         if [ "$HWDB" = yes -o "$HWDB" = no ] ; then
 235                 echo "$HWDB (set manually)"
 236         else
 237                 if `which pkg-config >/dev/null && pkg-config --atleast-version=196 libudev` ; then
 238                         HWDB=yes
 239                 else
 240                         HWDB=no
 241                 fi
 242                 echo "$HWDB (auto-detected)"
 243         fi
 244         if [ "$HWDB" = yes ] ; then
 245                 echo >>$c '#define PCI_HAVE_HWDB'
 246                 echo >>$m 'LIBUDEV=-ludev'
 247                 echo >>$m 'WITH_LIBS+=$(LIBUDEV)'
 248         fi
 249 fi
 250
 251 echo "Checking whether to build a shared library... $SHARED (set manually)"
 252 if [ "$SHARED" = no ] ; then
 253         echo >>$m 'PCILIB=$(LIBNAME).a'
 254         echo >>$m 'LDLIBS=$(WITH_LIBS)'
 255         echo >>$m 'LIB_LDLIBS='
 256 else
 257         if [ "$LIBEXT" = so ]; then
 258                 echo >>$m 'PCILIB=$(LIBNAME).$(LIBEXT).$(VERSION)'
 259         else
 260                 echo >>$m 'PCILIB=$(LIBNAME).$(VERSION).$(LIBEXT)'
 261         fi
 262         # We link the dependencies _to_ the library, so we do not need explicit deps in .pc
 263         echo >>$m 'LDLIBS='
 264         echo >>$m 'LIB_LDLIBS=$(WITH_LIBS)'
 265         echo >>$c '#define PCI_SHARED_LIB'
 266         if [ "$SHARED" = yes -a "$LIBEXT" = so ]; then
 267                 echo >>$m 'SONAME=-Wl,-soname,$(LIBNAME).$(LIBEXT)$(ABI_VERSION)'
 268         fi
 269 fi
 270 echo >>$m 'PCILIBPC=$(LIBNAME).pc'
 271
 272 echo >>$c "#define PCILIB_VERSION \"$VERSION\""
 273 sed '/"/{s/^#define \([^ ]*\) "\(.*\)"$/\1=\2/;p;d;};s/^#define \(.*\)/\1=1/' <$c >>$m