[saga.git] / dyn.tex

\ifx\endpart\undefined
\input macros.tex
\fi

\chapter{Dynamic Spanning Trees}\id{dynchap}%

\section{Dynamic graph algorithms}

In many applications, we often need to solve a~certain graph problem for a~sequence of graphs that
differ only a~little, so recomputing the solution for every graph from scratch would be a~waste of
time. In such cases, we usually turn our attention to \df{dynamic graph algorithms.} A~dynamic
algorithm is in fact a~data structure that remembers a~graph. It offers operations that modify the
structure of the graph and also operations that query the result of the problem for the current
state of the graph. A~typical example of a~problem of this kind is dynamic maintenance of connected
components:

\problemn{Dynamic connectivity}
Maintain an~undirected graph under a~sequence of the following operations:
\itemize\ibull
\:$\<Init>(n)$ --- Create a~graph with $n$~isolated vertices $\{1,\ldots,n\}$.\foot{%
The structure could support dynamic addition and removal of vertices, too,
but this is easy to add and infrequently used, so we will rather keep the set
of vertices fixed for clarity.}
\:$\<Insert>(G,u,v)$ --- Insert an~edge $uv$ to~$G$ and return its unique
identifier. This assumes that the edge did not exist yet.
\:$\<Delete>(G,e)$ --- Delete an~edge specified by its identifier from~$G$.
\:$\<Connected>(G,u,v)$ --- Test if vertices $u$ and~$v$ are in the same connected component of~$G$.
\endlist

\para
We have already encountered a~special case of dynamic connectivity when implementing the
Kruskal's algorithm in Section \ref{classalg}. At that time, we did not need to delete
any edges from the graph, which makes the problem substantially easier. This special
case is customarily called an~\df{incremental} or \df{semidynamic} graph algorithm.
We mentioned the Disjoint Set Union data structure of Tarjan and van Leeuwen (Theorem \ref{dfu})
which can be used for that: Connected components are represented by equivalence classes.
Queries on connectedness translate to \<Find>, edge insertions to \<Find>
followed by \<Union> if the new edge joins two different components. This way,
a~sequence of $m$~operations starting with an~empty graph on $n$~vertices is
processed in time $\O(n+m\timesalpha(m,n))$ and this holds even for the Pointer
Machine. Fredman and Saks \cite{fredman:cellprobe} have proven a~matching lower
bound in the cell-probe model which is stronger than RAM with $\O(\log n)$-bit
words.

In this chapter, we will focus on the dynamic version of the minimum spanning forest.
This problem seems to be intimately related to the dynamic connectivity. Indeed, all known
algorithms for dynamic connectivity maintain some sort of a~spanning forest. For example, in the
incremental algorithm we have just mentioned, this forest is formed by the edges that have
triggered the \<Union>s. This suggests that a~dynamic MSF algorithm could be obtained by modifying
the mechanism to keep the forest minimum. This will indeed turn out to be true, although we cannot
be sure that it will lead to the most efficient solution possible --- as of now, the known lower
bounds are very far.

Incremental MST will be easy to achieve even in the few pages of this section, but making it fully
dynamic will require more effort, so we will review some of the required building blocks before
going into that.

We however have to answer one important question first: What should be the output of
our MSF data structure? Adding an~operation that would return the MSF of the current
graph is of course possible, but somewhat impractical as this operation has to
spend $\Omega(n)$ time on the mere writing of its output. A~better way seems to
be making the \<Insert> and \<Delete> operations report the list of modifications
of the MSF implied by the change in the graph.

Let us see what happens when we \<Insert> an~edge~$e$ to a~graph~$G$ with its minimum spanning
forest~$F$, obtaining a~new graph~$G'$ with its MSF~$F'$. If $e$~connects two components of~$G$ (and
therefore also of~$F$), we have to add~$e$ to~$F$. Otherwise, one of the following cases happens:
Either $e$~is $F$-heavy and so the forest~$F$ is also the MSF of the new graph. Or it is $F$-light
and we have to modify~$F$ by exchanging the heaviest edge~$f$ of the path $F[e]$ with~$e$.

Correctness of the former case follows immediately from the Theorem on Minimality by order
(\ref{mstthm}), because any $F'$-light would be also $F$-light, which is impossible as $F$~was
minimum. In the latter case, the edge~$f$ is not contained in~$F'$ because it is the heaviest
on the cycle $F[e]+e$ (by the Red lemma, \ref{redlemma}). We can now use the Blue lemma
(\ref{bluelemma}) to prove that it should be replaced with~$e$. Consider the tree~$T$
of~$F$ that contains both endpoints of the edge~$e$. When we remove~$f$ from~$F$, this tree falls
apart to two components $T_1$ and~$T_2$. The edge~$f$ was the lightest in the cut~$\delta_G(T_1)$
and $e$~is lighter than~$f$, so $e$~is the lightest in~$\delta_{G'}(T_1)$ and hence $e\in F'$.

A~\<Delete> of an~edge that is not contained in~$F$ does not change~$F$. When we delete
an~MSF edge, we have to reconnect~$F$ by choosing the lightest edge of the cut separating
the new components (again the Blue lemma in action). If there is no such
replacement edge, we have deleted a~bridge, so the MSF has to remain
disconnected.

The idea of reporting differences in the MSF indeed works very well. We can summarize
what we have shown in the following lemma and use it to define the dynamic MSF.

\lemma
An~\<Insert> or \<Delete> of an~edge in~$G$ causes at most one edge addition, edge
removal or edge exchange in $\msf(G)$.

\problemn{Dynamic minimum spanning forest}
Maintain an~undirected graph with distinct weights on edges (drawn from a~totally ordered set)
and its minimum spanning forest under a~sequence of the following operations:
\itemize\ibull
\:$\<Init>(n)$ --- Create a~graph with $n$~isolated vertices $\{1,\ldots,n\}$.
\:$\<Insert>(G,u,v)$ --- Insert an~edge $uv$ to~$G$. Return its unique
        identifier and the list of additions and deletions of edges in $\msf(G)$.
\:$\<Delete>(G,e)$ --- Delete an~edge specified by its identifier from~$G$.
        Return the list of additions and deletions of edges in $\msf(G)$.
\endlist

\paran{Incremental MSF}%
To obtain an~incremental MSF algorithm, we need to keep the forest in a~data structure that
supports search for the heaviest edge on the path connecting a~given pair
of vertices. This can be handled efficiently by the Link-Cut trees of Sleator and Tarjan:

\thmn{Link-Cut Trees, Sleator and Tarjan \cite{sleator:trees}}\id{sletar}%
There is a~data structure that represents a~forest of rooted trees on~$n$ vertices.
Each edge of the forest has a~weight drawn from a~totally ordered set. The structure
supports the following operations in time $\O(\log n)$ amortized:\foot{%
The Link-Cut trees can offer a~plethora of other operations, but we do not mention them
as they are not needed in our application.}
\itemize\ibull
\:$\<Parent>(v)$ --- Return the parent of~$v$ in its tree or \<null> if $v$~is a~root.
\:$\<Root>(v)$ --- Return the root of the tree containing~$v$.
\:$\<Weight>(v)$ --- Return the weight of the edge $(\<Parent(v)>,v)$.
\:$\<PathMax>(v)$ --- Return the vertex~$w$ closest to $\<Root>(v)$ such that the edge
        $(\<Parent>(w),w)$ is the heaviest of those on the path from the root to~$v$.
        If more edges have the maximum weight, break the tie arbitrarily.
        If there is no such edge ($v$~is the root itself), return \<null>.
\:$\<Link>(u,v,x)$ --- Connect the trees containing $u$ and~$v$ by an~edge $(u,v)$ of
        weight~$x$. Assumes that $v~$is a tree root and $u$~lies in a~different tree.
\:$\<Cut>(v)$ --- Split the tree containing the non-root vertex $v$ to two trees by
        removing the edge $(\<Parent>(v),v)$. Returns the weight of this edge.
\:$\<Evert>(v)$ --- Modify the orientations of edges to make~$v$ the root of its tree.
\endlist

%% \>Additionally, all edges on the path from~$v$ to $\<Root>(v)$ can be enumerated in
%% time $\O(\ell + \log n)$, where $\ell$~is the length of that path. This operation
%% (and also the path itself) is called $\<Path>(v)$.
%% 
%% \>If the weights are real numbers (or in general an~arbitrary group), the $\O(\log n)$
%% operations also include:
%% 
%% \itemize\ibull
%% \:$\<PathWeight>(v)$ --- Return the sum of the weights on $\<Path>(v)$.
%% \:$\<PathUpdate>(v,x)$ --- Add~$x$ to the weights of all edges on $\<Path>(v)$.
%% \endlist

\proof
See \cite{sleator:trees}.
\qed

Once we have this structure, we can turn our ideas on updating of the MSF to
an~incremental algorithm:

\algn{\<Insert> in an~incremental MSF}
\algo
\algin A~graph~$G$ with its MSF $F$ represented as a~Link-Cut forest, an~edge~$uv$
with weight~$w$ to be inserted.
\:$\<Evert>(u)$. \cmt{$u$~is now the root of its tree.}
\:If $\<Root>(v) \ne u$: \cmt{$u$~and~$v$ lie in different trees.}
\::$\<Link>(v,u,w)$. \cmt{Connect the trees.}
\::Return ``$uv$ added''.
\:Otherwise: \cmt{both are in the same tree}
\::$y\=\<PathMax>(v)$.
\::$x\=\<Parent>(y)$.  \cmt{Edge~$xy$ is the heaviest on $F[uv]$.}
\::If $\<Weight>(y) > w$: \cmt{We have to exchange~$xy$ with~$uv$.}
\:::$\<Cut>(y)$, $\<Evert>(v)$, $\<Link>(u,v,w)$.
\:::Return ``$uv$~added, $xy$~removed''.
\::Otherwise return ``no changes''.
\algout The list of changes in~$F$.
\endalgo

\thmn{Incremental MSF}
When only edge insertions are allowed, the dynamic MSF can be maintained in time $\O(\log n)$
amortized per operation.

\proof
Every \<Insert> performs $\O(1)$ operations on the Link-Cut forest, which take
$\O(\log n)$ each by Theorem \ref{sletar}.
\qed

\rem
We can easily extend the semidynamic MSF algorithm to allow an~operation commonly called
\<Backtrack> --- removal of the most recently inserted edge. It is sufficient to keep the
history of all MSF changes in a~stack and reverse the most recent change upon backtrack.

What are the obstacles to making the structure fully dynamic?
Deletion of edges that do not belong to the MSF is trivial (we do not
need to change anything) and so is deletion of bridges (we just remove the bridge
from the Link-Cut tree, knowing that there is no edge to replace it). The hard part
is the search for replacement edges after an~edge belonging to the MSF is deleted.

This very problem also has to be solved by algorithms for fully dynamic connectivity,
we will take a~look on them first.

%--------------------------------------------------------------------------------

\section{Eulerian Tour trees}

An~important stop on the road to fully dynamic algorithms has the name \df{Eulerian Tour trees} or
simply \df{ET-trees}. It is a~representation of forests introduced by Henzinger and King
\cite{henzinger:randdyn} in their randomized dynamic algorithms. It is similar to the Link-Cut
trees, but it is much simpler and instead of path operations it offers efficient operations on
subtrees. It is also possible to attach auxiliary data to vertices and edges of the original tree.

\defn\id{eulseq}%
Let~$T$ be a~rooted tree. We will call a~sequence of vertices of~$T$ its \df{Eulerian Tour sequence (ET-sequence)}
if it lists the vertices visited by the depth-first traversal of~$T$.
More precisely, it can be generated by the following procedure $\<ET>(v)$
when it is invoked on the root of the tree:
\algo
\:Record~$v$ in the sequence.
\:For each son~$w$ of~$v$:
\::Call $\<ET>(w)$.
\::Record~$w$.
\endalgo
\>A~single tree can have multiple ET-sequences, corresponding to different orders in which the
sons can be enumerated in step~2.

In every ET-tree, one of the occurrences of each vertex is defined as its \df{active occurrence} and
it will be used to store auxiliary data associated with that vertex.

\obs
An~ET-sequence contains a~vertex of degree~$d$ exactly $d$~times except for the root which
occurs $d+1$ times. The whole sequence therefore contains $2n-1$ elements. It indeed describes the
order vertices on an~Eulerian tour in the tree with all edges doubled. Let us observe what happens
to an~ET-sequence when we modify the tree.

When we \em{delete} an~edge $uv$ from the tree~$T$ (let $u$~be the parent of~$v$), the sequence
$AuvBvuC$ (with no~$u$ nor~$v$ in~$B$) splits to two sequences $AuC$ and $vBv$.
If there was only a~single occurrence of~$v$, then $v$~was a~leaf and thus the sequence
transforms from $AuvuC$ to $AuC$ and $v$~alone.

\em{Changing the root} of the tree~$T$ from~$v$ to~$w$ changes the sequence from $vAwBwCv$ to $wBwCvAw$.
If $w$~was a~leaf, the sequence changes from $vAwCv$ to $wCvAw$. If $vw$ was the only edge of~$T$,
the sequence $vw$ becomes $wv$. Note that this works regardless of the possible presence of~$w$ inside~$B$.

\em{Joining} the roots of two trees by a~new edge makes their ET-sequences $vAv$ and~$wBw$
combine to $vAvwBwv$. Again, we have to handle the cases when $v$ or~$w$ has degree~1 separately:
$v$~and~$wBw$ combine to $vwBwv$, and $v$~with~$w$ makes $vwv$.

\float{\valign{\vfil#\vfil\cr
\hbox{\epsfbox{pic/ettree.eps}}\cr
\noalign{\qquad\quad}
  \halign{#\hfil\cr
    $T_1: 0121034546474308980$,~~$T_2: aba$. \cr
    $T_1-34: 01210308980, 4546474$. \cr
    $T_1\hbox{~rooted at~3}: 3454647430898012103$. \cr
    $T_1+0a+T_2$: $0121034546474308980aba0$. \cr
  }\cr
}}{Trees and their ET-sequences}

If any of the occurrences that we have removed from the sequence was active, there is always
a~new occurrence of the same vertex that can stand in its place and inherit the auxiliary data.

The ET-trees will store the ET-sequences as $(a,b)$-trees with the parameter~$a$ set upon
initialization of the structure and with $b=2a$. We know from the standard theorems of $(a,b)$-trees
(see for example \cite{clrs}) that the depth of a~tree with $n$~leaves is always $\O(\log_a n)$
and that all basic operations including insertion, deletion, search, splitting and joining the trees
run in time $\O(b\log_a n)$ in the worst case.

We will use the ET-trees to maintain a~spanning forest of the dynamic graph. The auxiliary data of
each vertex will hold a~list of edges incident with the given vertex, that do not lie in the
forest. Such edges are usually called the \df{non-tree edges.}

\defn
\df{Eulerian Tour trees (ET-trees)} are a~data structure that represents a~forest of trees and a~set of non-tree
edges associated with the vertices of the forest. To avoid confusion, we will distinguish between
\df{original} vertices and edges (of the given trees) and the vertices and edges of the
data structure. The structure consists of:
\itemize\ibull
\:A~collection of $(a,b)$-trees of some fixed parameters $a$ and~$b$.
        Each such tree corresponds to one of the original trees~$T$. Its
        leaves (in the usual tree order) correspond to the elements
        of an~ET-sequence for~$T$. Each two consecutive leaves $u$ and~$v$ are separated
        by a~unique key stored in an~internal vertex of the $(a,b)$-tree. This key is used to represent
        the original edge~$uv$. Each original edge is therefore kept in both its orientations.
\:Mappings \<act>, \<edge> and \<twin>:
        \itemize\icirc
                \:$\<act>(v)$ maps each original vertex to the leaf containing its active occurrence;
                \:$\<edge>(e)$ of an~original edge~$e$ is one of the internal keys representing~it;
                \:$\<twin>(k)$ pairs an~internal key~$k$ with the other internal key of the same original edge.
        \endlist
\:A~list of non-tree edges placed in each leaf. The lists are allowed to be non-empty only
        in the leaves that represent active occurrences of original vertices.
\:Boolean \df{markers} in the internal vertices that signal presence of a~non-tree
        edge anywhere in the subtree rooted at the internal vertex.
\:Counters $\<leaves>(v)$ that contain the number of leaves in the subtree rooted at~$v$.
\endlist

\defn
The ET-trees support the following operations on the original trees:
\itemize\ibull
\:\<Create> --- Create a~single-vertex tree.
\:$\<Link>(u,v)$ --- Join two different trees by an~edge~$uv$ and return a~unique identifier
        of this edge.
\:$\<Cut>(e)$ --- Split a~tree by removing the edge~$e$ given by its identifier.
\:$\<Connected>(u,v)$ --- Test if the vertices $u$ and~$v$ lie in the same tree.
\:$\<Size>(v)$ --- Return the number of vertices in the tree containing the vertex~$v$.
\:$\<InsertNontree>(v,e)$ --- Add a~non-tree edge~$e$ to the list at~$v$ and return a~unique
        identifier of this edge.
\:$\<DeleteNontree>(e)$ --- Delete a~non-tree edge~$e$ given by its identifier.
\:$\<ScanNontree>(v)$ --- Return a~list of non-tree edges associated with the vertices
        of the $v$'s tree.
\endlist

\impl
We will implement the operations on the ET-trees by translating the intended changes of the
ET-sequences to operations on the $(a,b)$-trees. The role of identifiers of the original vertices
and edges will be of course played by pointers to the respective leaves and internal keys of
the $(a,b)$-trees.

\<Cut> of an~edge splits the $(a,b)$-tree at both internal keys representing the given edge
and joins them back in the different order.

\<Link> of two trees can be accomplished by making both vertices the roots of their trees first
and joining the roots by an~edge afterwards. Re-rooting involves splits and joins of $(a,b)$-trees.
As we can split at any occurrence of the new root vertex, we will use the active occurrence
which we remember. Linking of the roots is translated to joining of the $(a,b)$-trees.

\<Connected> follows parent pointers from both $u$ and~$v$ to the roots of their trees.
Then it checks if the roots are equal.

\<Size> finds the root and returns its counter.

\<InsertNontree> finds the leaf $\<act>(v)$ containing the list of $v$'s non-tree edges
and inserts the new edge there. The returned identifier will consist from the pointer to
the edge and the vertex in whose list it is stored. Then we have to recalculate the markers
on the path from $\<act>(v)$ to the root. \<DeleteNontree> is analogous.

Whenever any other operation changes a~vertex of the tree, it will also update its marker and
counter and, if necessary, the markers and counters on the path to the root.

\<ScanNontree> traverses the tree recursively from the root, but it does not enter the
subtrees whose roots are not marked.

Analysis of time complexity of the operations is now straightforward:

\thmn{Eulerian Tour trees, Henzinger and Rauch \cite{henzinger:randdyn}}\id{etthm}%
The ET-trees perform the operations \<Link> and \<Cut> in time $\O(a\log_a n)$, \<Create>
in $\O(1)$, \<Connected>, \<Size>, \<InsertNontree>, and \<DeleteNontree> in $\O(\log_a n)$, and
\<ScanNontree> in $\O(a\log_a n)$ per edge reported. Here $n$~is the number of vertices
in the original forest and $a\ge 2$ is an~arbitrary constant.

\proof
We set $b=2a$. Our implementation performs $\O(1)$ operations on the $(a,b)$-trees
per operation on the ET-tree, plus $\O(1)$ other work. We apply the standard theorems
on the complexity of $(a,b)$-trees \cite{clrs}.
\qed

\examplen{Connectivity acceleration}\id{accel}%
In most cases, the ET-trees are used with $a$~constant, but sometimes choosing~$a$ as a~function
of~$n$ can also have its beauty. Suppose that there is a~data structure which maintains an~arbitrary
spanning forest of a~dynamic graph. Suppose also that the structure works in time $\O(\log^k n)$
per operation and that it reports $\O(1)$ changes in the spanning forest for every change
in the graph. If we keep the spanning forest in ET-trees with $a=\log n$, the updates of the
data structure cost an~additional $\O(\log^2 n / \log\log n)$, but connectivity queries accelerate to $\O(\log
n/\log\log n)$.

\paran{ET-trees with weights}
In some cases, we will also need a~representation of weighted graphs and enumerate the non-tree
edges in order of their increasing weights (in fact, it will be sufficient to find the
lightest one, remove it and iterate). This can be handled by a~minute modification of the
ET-trees.

The tree edges will remember their weight in the corresponding internal keys of the ET-tree.
We replace each list of non-tree edges by an~$(a,b)$-tree keeping the edges sorted by weight.
We also store the minimum element of that tree separately, so that it can be accessed in constant
time. The boolean \em{marker} will then become the minimum weight of a~non-tree edge attached to the
particular subtree, which can be recalculated as easy as the markers can. Searching for the
lightest non-tree edge then just follows the modified markers.

The time complexities of all operations therefore remain the same, with a~possible
exception of the operations on non-tree edges, to which we have added the burden of
updating the new $(a,b)$-trees. This however consists of $\O(1)$ updates per a~single
call to \<InsertNontree> or \<DeleteNontree>, which takes $\O(a\log_a n)$ time only.
We can therefore conclude:

\corn{Weighted ET-trees}\id{wtet}%
The time bounds in Theorem \ref{etthm} hold for the weighted ET-trees, too.


%--------------------------------------------------------------------------------

\section{Dynamic connectivity}

The fully dynamic connectivity problem has a~long and rich history. In the 1980's, Frederickson \cite{frederickson:dynamic}
has used his topological trees to construct a~dynamic connectivity algorithm of complexity $\O(\sqrt m)$ per update and
$\O(1)$ per query. Eppstein et al.~\cite{eppstein:sparsify} have introduced a~sparsification technique which can bring the
updates down to $\O(\sqrt n)$. Later, several different algorithms with complexity on the order of $n^\varepsilon$
were presented by Henzinger and King \cite{henzinger:mst} and also by Mare\v{s} \cite{mares:dga}.
A~polylogarithmic time bound was first reached by the randomized algorithm of Henzinger and King \cite{henzinger:randdyn}.
The best result known as of now is the $\O(\log^2 n)$ time deterministic algorithm by Holm,
de~Lichtenberg and Thorup \cite{holm:polylog}, which will we describe in this section.

The algorithm will maintain a~spanning forest~$F$ of the current graph~$G$, represented by an~ET-tree
which will be used to answer connectivity queries. The edges of~$G\setminus F$ will be stored as~non-tree
edges in the ET-tree. Hence, an~insertion of an~edge to~$G$ either adds it to~$F$ or inserts it as non-tree.
Deletions of non-tree edges are also easy, but when a~tree edge is deleted, we have to search for its
replacement among the non-tree edges.

To govern the search in an~efficient way, we will associate each edge~$e$ with a~level $\ell(e) \le
L = \lfloor\log_2 n\rfloor$. For each level~$i$, we will use~$F_i$ to denote the subforest
of~$F$ containing edges of level at least~$i$. Therefore $F=F_0 \supseteq F_1 \supseteq \ldots \supseteq F_L$.
We will maintain the following \em{invariants:}

{\narrower
\def\iinv{{\bo I\the\itemcount~}}
\numlist\iinv
\:$F$~is the maximum spanning forest of~$G$ with respect to the levels. In other words,
if $uv$ is a~non-tree edge, then $u$ and~$v$ are connected in~$F_{\ell(uv)}$.
\:For each~$i$, the components of~$F_i$ have at most $\lfloor n/2^i \rfloor$ vertices.
This implies that all~$F_i$ for $i>L$ are empty.
\endlist
}

At the beginning, the graph contains no edges, so both invariants are trivially
satistifed. Newly inserted edges can enter level~0, which cannot break I1 nor~I2.

When we delete a~tree edge at level~$\ell$, we split a~tree~$T$ of~$F_\ell$ to two
trees $T_1$ and~$T_2$. Without loss of generality, let us assume that $T_1$ is the
smaller one. We will try to find the replacement edge of the highest possible
level that connects them back. From I1, we know that such an~edge cannot belong to
level greater than~$\ell$, so we start looking for it at level~$\ell$. According
to~I2, the tree~$T$ had at most $\lfloor n/2^\ell\rfloor$ vertices, so $T_1$ has
at most $\lfloor n/2^{\ell+1} \rfloor$ of them. Thus we can increase the levels
of all edges of~$T_1$ without violating either invariant.

We now start enumerating the non-tree edges incident with~$T_1$. For each such edge,
we test whether its other endpoint lies in~$T_2$. If it does, we have found the replacement
edge and we insert it to~$F_\ell$. Otherwise we move the edge one level up. (This will
be the gist of our amortization argument: We can charge most of the work on level
increases and we know that the level of each edge can reach at most~$L$.)

If the non-tree edges at level~$\ell$ are exhausted, we try the same in the next
lower level and so on. If there is no replacement edge on level~0, the tree~$T$
remains disconnected.

\impl
We will use a~single ET-tree with~$a$ set to~2 for each level. For the $i$-th level, the ET-tree
${\cal E}_i$ will represent the forest~$F_i$ and the non-tree edges of
level~$i$ will be attached to its vertices.

\algn{Insertion of an~edge}
\algo
\algin An~edge $uv$ to insert.
\:$\ell(uv) \= 0$.
\:Ask the ET-tree ${\cal E}_0$ if $u$ and~$v$ are in the same component. If they are:
\::Add $uv$ to the list of non-tree edges in ${\cal E}_0$ at both $u$ and~$v$.
\:Otherwise:
\::Add $uv$ to~$F_0$.
\endalgo

\algn{Deletion of an~edge}
\algo
\algin An~edge $uv$ to delete.
\:$\ell \= \ell(uv)$.
\:If $uv$ is a~non-tree edge:
\::Remove $uv$ from the lists of non-tree edges at both $u$ and~$v$ in~${\cal E}_{\ell}$.
\:Otherwise:
\::Remove $uv$ from~$F_\ell$.
\::Call $\<Replace>(uv,\ell)$.
\endalgo

\algn{$\<Replace>(uv,i)$ -- Search for an~replacement edge for~$uv$ at level~$i$}
\algo
\:Let $T_1$ and~$T_2$ be the trees in~$F_i$ containing $u$ and~$v$ respectively.
\:If $n(T_1) > n(T_2)$, swap $T_1$ with~$T_2$.
\:Move all level~$i$ edges in~$T_1$ to level~$i+1$ and insert them to~${\cal E}_{i+1}$.
\:Enumerate non-tree edges incident with vertices of~$T_1$ and stored in ${\cal E}_i$.
  For each edge~$xy$, $x\in T_1$, do:
\::If $y\in T_2$, add the edge $xy$ to~$F_i$ and return.
\::Otherwise increase $\ell(xy)$ by one. This includes deleting~$xy$ from~${\cal E}_i$
  and inserting it to~${\cal E}_{i+1}$.
\:If $i>0$, call $\<Replace>(xy,i-1)$.
\endalgo

\>Analysis of the time complexity is straightforward:

\thmn{Fully dynamic connectivity, Holm et al.~\cite{holm:polylog}}\id{dyncon}%
Dynamic connectivity can be maintained in time $\O(\log^2 n)$ amortized for both
\<Insert> and \<Delete> and in time $\O(\log n/\log\log n)$ per \<Connected>
in the worst case.

\proof
The direct cost of an~\<Insert> is $\O(\log n)$ for the operations on the ET-trees
(by Theorem \ref{etthm}). We will have it pre-pay all level increases of the new
edge. Since the levels never decrease, each edge can be brought a~level up at most
$L=\lfloor\log n\rfloor$ times. Every increase costs $\O(\log n)$ on the ET-tree
operations, so we pay $\O(\log^2 n)$ for all of them.

A~\<Delete> costs $\O(\log^2 n)$ directly, as we might have to update all~$L$
ET-trees. Additionally, we call \<Replace> up to $L$ times. The initialization of
\<Replace> costs $\O(\log n)$ per call, the rest is paid for by the edge level
increases.

To bring the complexity of \<Connected> from $\O(\log n)$ down to $\O(\log n/\log\log n)$,
we apply the trick from Example \ref{accel} and store~$F_0$ in a~ET-tree with $a=\max(\lfloor\log n\rfloor,2)$.
This does not hurt the complexity of insertions and deletions, but allows for faster queries.
\qed

%--------------------------------------------------------------------------------

\section{Dynamic MSF}

Most of the early algorithms for dynamic connectivity also imply $\O(n^\varepsilon)$
algorithms for dynamic maintenance of the MSF. Henzinger and King \cite{henzinger:twoec,henzinger:randdyn}
have generalized their randomized connectivity algorithm to maintain the MSF in $\O(\log^5 n)$ time per
operation, or $\O(k\log^3 n)$ if only~$k$ different values of edge weights are allowed. They have solved
the decremental version of the problem first (which starts with a~given graph and only edge deletions
are allowed) and then presented a~general reduction from the fully dynamic MSF to its decremental version.
We will describe the algorithm of Holm, de Lichtenberg and Thorup \cite{holm:polylog}, who have followed
the same path. They have modified their dynamic connectivity algorithm to solve the decremental MSF
in $\O(\log^2 n)$ and obtained the fully dynamic MSF working in $\O(\log^4 n)$ per operation.

\paran{Decremental MSF}%
Turning the algorithm from the previous section to decremental MSF requires only two
changes: First, we have to start with the forest~$F$ equal to the MSF of the initial
graph. As we require to pay $\O(\log^2 n)$ for every insertion, we can use almost arbitrary
MSF algorithm to find~$F$. Second, when we search for an~replacement edge, we need to pick
the lightest possible choice. We will therefore use the weighted version of the ET-trees (Corollary \ref{wtet})
and try the lightest non-tree edge incident with the examined tree first. We must ensure
that the lower levels cannot contain a~lighter replacement edge, but fortunately the
light edges tend to ``bubble up'' in the hierarchy of levels. This can be formalized as
the following invariant:

{\narrower
\def\iinv{{\bo I\the\itemcount~}}
\numlist\iinv
\itemcount=2
\:On every cycle, the heaviest edge has the smallest level.
\endlist
}

\>This easily implies that we select the right replacement edge:

\lemma\id{msfrepl}%
Let $F$~be the minimum spanning forest and $e$ any its edge. Then among all replacement
edges for~$e$, the lightest one is on the maximum level.

\proof
Let us consider any two edges $f_1$ and~$f_2$ replacing~$e$. By minimality of~$F$ and the Cycle
rule (\ref{cyclerule}), each $f_i$ is the heaviest edge on the cycle~$C_i = F[f_i] + f_i$.
In a~moment, we will show that the symmetric difference~$C$ of these two cycles is again a~cycle.
This implies that if $f_1$ is heavier than~$f_2$, then by I3 $f_1$~is the heaviest edge on~$C$, so
$\ell(f_1) \le \ell(f_2)$. Therefore the lightest of all replacement edges must have
the maximum level.

Why is~$C$ a~cycle:
Let $F^a$ and~$F^b$ be the trees of~$F-e$ in which the endpoints of~$e$ lie, and for
every edge~$g$ between $F^a$ and~$F^b$ let $g^a$ and~$g^b$ be its respective endpoints.
We know that $C_i$ consists of the path $F[f_i^a,e^a]$, the edge~$e$, the path $F[e^b,f_i^b]$,
and the edge~$f_i$. Thus~$C$ must contain the paths $F[f_1^a,f_2^a]$ and $F[f_1^b,f_2^b]$ and
the edges $f_1$ and~$f_2$, which together form a~simple cycle.
\qed

We now have to make sure that the additional invariant is observed:

\lemma\id{ithree}%
After every operation, I3 is satisfied.

\proof
When the structure is freshly initialized, I3 is obviously satisfied, because all edges
are at level~0. Sole deletions of edges (both tree and non-tree) cannot violate I3, so we need
to check only the replaces, in particular when an~edge~$e$ either gets its level increased
or becomes a~tree edge.

For the violation to happen, $e$~must be the heaviest on some cycle~$C$, so by the Cycle
rule, $e$~must be non-tree. The increase of $\ell(e)$ must therefore happen when~$e$ is
considered as a~replacement edge incident with some tree~$T_1$ at level $\ell=\ell(e)$.
We will pause the computation just before this increase and we will prove that
all other edges of~$C$ already are at levels greater than~$\ell$.

Let us first show that for edges of~$C$ incident with~$T_1$. All edges of~$T_1$ itself
already are on the higher levels as they were moved there at the very beginning of the
search for the replacement edge. As the algorithm always tries the lightest candidate
for the replacement edge first, all non-tree edges incident with~$T_1$ which are lighter
than~$e$ were already considered and thus also moved one level up. This includes all
other edges of~$C$ that are incident with~$T_1$.

The case of edges that do not touch~$T_1$ is easy to handle: Such edges do not exist.
If they did, at least two edges of~$C$ would have to be non-tree edges connecting~$T_1$
with the other trees at level~$\ell$, so one of them that is lighter than~$e$ would be selected as the
replacement edge before~$e$ could be considered.
\qed

We can conclude:

\thmn{Decremental MSF, Holm et al.~\cite{holm:polylog}}
When we start with a~graph with $n$~vertices and~$m\ge n$ edges and we perform
$d$~edge deletions, the MSF can be maintained in time $\O((m+d)\cdot\log^2 n)$.

\paran{Fully dynamic MSF}%
The decremental MSF algorithm can be turned to a~fully dynamic one by a~blackbox
reduction whose properties are summarized by the following theorem:

\thmn{MSF dynamization, Henzinger et al.~\cite{henzinger:twoec}, Holm et al.~\cite{holm:polylog}}
Suppose that we have a~decremental MSF algorithm that for any $a$,~$b$ can be initialized
on a~graph with~$a$ vertices and~$b$ edges and then it executes an~arbitrary sequence
of deletions in time $\O(b\cdot t(a,b))$, where~$t$ is a~non-decreasing function.
Then there exists a~fully dynamic MSF algorithm for a~graph on $n$~vertices, starting
with no edges, that performs $m$~insertions and deletions in amortized time:
$$
\O\left( \log^3 n + \sum_{i=1}^{\log m} \sum_{j=1}^i \; t(\min(n,2^j), 2^j) \right) \hbox{\quad per operation.}
$$

\proofsketch
The reduction is very technical, but its essence is the following: We maintain a~logarithmic number
of decremental structures $A_0,\ldots,A_{\log n}$ of exponentially increasing sizes. Every non-tree
edge is contained in exactly one~$A_i$, tree edges can belong to multiple structures.

When an~edge is inserted, we union it with some of the $A_i$'s, build a~new decremental structure
and amortize the cost of the build over the insertions. Deletes of non-tree edges are trivial.
Delete of a~non-tree edge is performed on all $A_i$'s containing it and the replacement edge is
sought among the replacement edges found in these structures. The unused replacement edges then have
to be reinserted back to the structure.

The original reduction of Henzinger et al.~handles the reinserts by a~mechanism of batch insertions
supported by their decremental structure, which is not available in our case. Holm et al.~have
replaced it by a~system of auxiliary edges inserted at various places in the structure.
We refer to the article \cite{holm:polylog} for details.
\qed

\corn{Fully dynamic MSF}
There is a~fully dynamic MSF algorithm that works in amortized time $\O(\log^4 n)$
per operation for graphs on $n$~vertices.

\proof
Apply the reduction from the previous theorem to the decremental algorithm we have
developed. This results in an~algorithm of amortized complexity $\O(\log^4 m)$ where~$m$
is the number of operations performed. This could be more than $\O(\log^4 n)$ if
$m$~is very large, but we can rebuild the whole structure after $n^2$~operations,
which brings $\log m$ down to $\O(\log n)$. The $\O(n^2\log^4 n)$ cost of the
rebuild then incurs only $\O(\log^4 n)$ additional cost on each operation.
\qed

\rem
The limitation of MSF structures based on the Holm's algorithm for connectivity
to edge deletions only seems to be unavoidable. The invariant I3 could be easily
broken for many cycles at once whenever a~very light non-tree edge is inserted.
We could try increasing the level of the newly inserted edge, but we would quite
possibly hit I1 before we skipped the levels of all the heavies edges on the
particular cycles.

On the other hand, if we decided to drop I3, we would encounter different problems.
We have enough time to scan all non-tree edges incident to the current tree~$T_1$
--- we can charge it on the level increases of its tree edges and if we use the
degree reduction from Lemma \ref{degred}, there are at most two non-tree edges
per vertex. (The reduction can be used dynamically as it always translates a~single
change of the original graph to $\O(1)$ changes of the reduced graph.) The lightest
replacement edge however could also be located in the super-trees of~$T_1$ on the
lower levels, which are too large to scan and both I1 and I2 prevent us from
charging the time on increasing levels there.

An~interesting special case in which insertions are possible is when all non-tree
edges have the same weight. This leads to the following algorithm for dynamic MSF
on~graphs with a~small set of allowed edge weights.

\paran{Dynamic MSF with limited edge weights}%
Let us assume for a~while that our graph has edges of only two different weights (let us say
1~and~2). We will drop our rule that all edge weights are distinct for a~moment and we recall that
the basic structural properties of the MST's from Section \ref{mstbasics} still hold.

We split the graph~$G$ to two subgraphs~$G_1$ and~$G_2$ according to the edge
weights. We use one instance~$\C_1$ of the dynamic connectivity algorithm to maintain
an~arbitrary spanning forest~$F_1$ of~$G_1$, which is obviously minimum. Then we add
another instance~$\C_2$ to maintain a~spanning forest~$F_2$ of the graph $G_2\cup F_1$
such that all edges of~$F_1$ are forced to be in~$F_2$. Obviously, $F_2$~is the
MSF of the whole graph~$G$ --- if any edge of~$F_1$ were not contained in~$\msf(G)$,
we could use the standard exchange argument to create an~even lighter spanning tree.\foot{This
is of course the Blue lemma in action, but we have to be careful as we did not have proven it
for graphs with multiple edges of the same weight.}

When a~weight~2 edge is inserted to~$G$, we insert it to~$\C_2$ and it either enters~$F_2$
or becomes a~non-tree edge. Similarly, deletion of a~weight~2 edge is a~pure deletion in~$\C_2$,
because such edges can be replaced only by other weight~2 edges.

Insertion of edges of weight~1 needs more attention: We insert the edge to~$\C_1$. If~$F_1$
stays unchanged, we are done. If the new edge enters~$F_1$, we use Sleator-Tarjan trees
kept for~$F_2$ to check if the new edge covers some tree edge of weight~2. If this is not
the case, we insert the new edge to~$\C_2$ and hence also to~$F_2$ and we are done.
Otherwise we exchange one of the covered weight~2 edges~$f$ for~$e$ in~$\C_2$. We note
that~$e$ can inherit the level of~$f$ and $f$~can become a~non-tree edge without
changing its level. This adjustment can be performed in time $\O(\log^2 n)$, including
paying for the future level increases of the new edge.

Deletion of weight~1 edges is once more straightforward. We delete the edge from~$\C_1$.
If it has no replacement, we delete it from~$\C_2$ as well. If it has a~replacement,
we delete the edge from~$\C_2$ and insert the replacement on its place as described
above. We observe than this pair of operations causes an~insertion, deletion or
a~replacement in~$\C_2$.

This way, we can handle every insertion and deletion in time $\O(\log^2 n)$ amortized.
This construction can be iterated in an~obvious way: if we have $k$~distinct edge weights,
we build $k$~connectivity structures $\C_1,\ldots,\C_k$. The structure~$\C_i$ contains edges of
weight~$i$ and the MSF edges from~$\C_{i-1}$. Bounding the time complexity is then easy:

\thmn{MSF with limited edge weights}
There is a~fully dynamic MSF algorithm that works in time $\O(k\cdot\log^2 n)$ amortized
per operation for graphs on $n$~vertices with only $k$~distinct edge weights allowed.

\proof
A~change in the graph~$G$ involving an~edge of weight~$w$ causes a~change in~$\C_w$,
which can propagate to~$\C_{w+1}$ and so on, possibly up to~$\C_k$. In each~$\C_i$,
we spend time $\O(\log^2 n)$ by updating the connectivity structure according to
Theorem \ref{dyncon}.
\qed


\endpart