1 Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
3 * pci.ids: New ID's. Again.
5 Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
7 * lspci.c (show_size): Don't show size if it's zero (usually
8 due to bus-centric mode being enabled).
10 Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
12 * lib/pci.h: Types are OS dependent.
14 * lib/internal.h: Byte order hacks are OS dependent.
16 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
18 * lib/Makefile, lib/access.c: Added fbsd-device target.
20 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
21 incorrectly set to device ID.
23 * README: Added a note that we support FreeBSD.
25 * Makefile (PREFIX, ROOT): Set it depending on the OS.
26 (%.8): Grrr, BSD date is not able to convert date formats the same way
27 as GNU date does. Use sed instead.
28 (install): Use `-c' when calling install.
30 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
31 by Jari Kirma <kirma@cs.hut.fi>.
33 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
34 and pwrite only when we are certain it's safe (i.e., glibc 2.1
35 on all architectures or any libc on a i386 where we really know
36 how to use syscalls directly). In all other cases, emulate it
37 with lseek/read/write.
39 * pci.ids: Some more IDs.
41 Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
43 * pci.ids: Added IDs of parallel port controller cards as sent
44 by Tim Waugh <tim@cyberelk.demon.co.uk>.
46 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
48 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
50 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
53 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
54 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
55 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
56 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
59 * lspci.c (show_msi): Added dumping of the MSI capability.
60 (show_slotid): The same for SlotID capability.
61 (show_caps): Seperated capability dumping, because it should
62 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
63 layout of htype2, so I'm a bit unsure about it wrt capabilities
64 -- they at least have to live somewhere else since address 0x34
65 is already defined differently in htype2.
67 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
68 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
69 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
71 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
72 (required by the PCI 2.2 specs).
74 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
76 * lspci.c (show_size): Added new function for dumping of region sizes.
77 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
80 * lib/pci.h (struct pci_dev): known_fields moved to the public part
83 * Added support for region sizes. Needs support in the kernel, because
84 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
85 now returns a bitmask of what fields were really read.
87 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
90 Added `uninstall' target - removes all traces of pciutils.
92 - Lots of cleanups in the ATI, S3, Adaptec vendors.
93 - Changed Compaq QVision 1280/p definitions, as it's not possible
94 to determine the revision from the device ID.
95 - Same for the Tseng ET4000.
96 The id's said I had a rev C, when it was actually a rev B.
97 - Removed some unnecessary strings
98 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
99 `Ethernet card'. This should be determined from config space.
100 - Lots of other new vendors & devices
101 - Other additional small cleanups.
103 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
105 * lib/names.c (pci_lookup_name): When device ID lookup
106 fails, return hexadecimal device ID instead of vendor ID.
107 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
108 I've just extended the fix to subsystem ID's.
110 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
112 * lspci.c (show_agp): Bug fix from Petr Vandrovec
113 <vandrove@vc.cvut.cz>. The command register was displayed
116 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
118 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
119 numbers if not supplied by the libc.
121 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
123 * Released the whole package as version 2.0.
125 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
127 * pci.ids: Added several new ID's contributed by people
128 on the linux-pci list.
130 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
132 * lspci.c: Display I/O addresses correctly on sparc64.
133 * lib/header.h: Ditto.
135 * lib/configure: On sparc set HAVE_64BIT* as well, we want
136 a binary which works on both 32bit and 64bit SPARCs.
138 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
140 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
143 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
145 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
147 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
148 as a multi-function device, because several single-function devices
149 don't decode the function bits at all.
151 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
153 * Makefile (install): Don't use "-o root -g root" for installation
154 since it breaks on machines where programs are not installed by root.
155 Reported by Richard Gooch <rgooch@atnf.csiro.au>
157 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
159 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
161 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
162 or 64-bit depending on CPU.
164 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
165 according to bus address width.
167 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
169 * Released as 1.99.4.
171 * lspci.c: Capability list parser now recognizes both AGP
172 registers and PCI Power Management registers (the latter
173 is mainly guesswork based on DEC/Intel 21153 bridge specs
174 since I don't have the PCI Power Management document).
176 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
179 * lspci.c: Added bridge checks to bus mapping code.
181 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
183 * lspci.c: Implemented bus mapping mode (-M).
185 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
186 (show): Split to show() and show_device().
188 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
189 set it to the real access method afterwards.
191 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
193 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
194 don't check PCI_COMMAND for I/O and memory enables.
196 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
198 * Makefile: Added target `release' which substitutes new version
199 number to .spec, .lsm and README. Also rewrote target `dist'.
201 * Released as 1.99.3.
203 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
205 * lib/header.h: Until kernel adopts new layout of PCI
206 includes (i.e., separate declaration of header structure,
207 functions and device IDs), which is not going to happen
208 before 2.3, we'll use our own definiton of the header.
210 * lspci.c (show_verbose): Display `Cap' flag in device status.
212 * lspci.c (show_htype0): Display capability lists whereever
213 available. The only capability name we recognize now is `AGP'.
214 Unfortunately, capabilities are stored in device-dependent
215 portion of the configuration space and are thus available
216 only to root unless you read a dump.
218 * lspci.c (scan_devices): Use cache instead of buffering.
220 * lib/buffer.c: Removed (obsoleted by the cache).
222 * lib/access.c: Added general caching mechanism.
224 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
226 * pci.ids: Added few devices.
228 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
230 * Version string is now defined in top-level Makefile, exported
231 to the configure script and also substituted to man pages.
233 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
234 (show_verbose): Rewrote interrupt display logic.
236 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
238 * lib/configure: Rewrote detection of Linux versions. Now it
239 works on 2.0 kernels (only with direct/dump access, of course).
241 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
244 * lib/proc.c (proc_read, proc_write): Distinguish between short
245 read/write and real errors.
247 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
248 libpci respects buscentric mode automatically.
250 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
251 bytes of header (the whole standard part).
253 * common.c: pcilib options are now all uppercase. Also moved
254 PCI access debugging option here.
256 * Released as 1.99.2.
258 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
260 * Wrote configure script and rewrote Makefiles.
262 * Removed few unused variables.
264 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
266 * common.c: Moved several functions used in both setpci and lspci
267 here. This includes parsing of libpci-related options.
269 * More library tweaks.
271 * filter.c, names.c: Moved to library.
273 * setpci: Rewritten to use the library.
275 * Released as 1.99.1.
277 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
279 * lspci.c (scan_devices): For cardbus bridges, read first 128
280 bytes of config space to get full standard header.
282 * Makefile (CFLAGS): Removed "-Wno-unused".
284 * Started the "New Generation" branch and introduced the
287 * lspci: Rewritten to use the library.
289 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
291 * Released as version 1.10.
293 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
295 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
296 Dag Wieers <dag@digibel.be>.
298 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
300 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
302 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
304 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
306 * Released as version 1.09.
308 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
310 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
311 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
313 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
315 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
317 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
319 * Released as version 1.08.
321 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
323 * lspci.8: Changed warning about lspci -xxx.
325 * lspci.c: Require "-xxx" for full configuration space dump, so that
326 it's impossible to crash the machine by single typo.
328 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
330 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
332 * lspci.c (show_bases): Better displaying of unassigned and
333 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
336 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
338 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
339 (thanks to Geert Uytterhoeven for finding this out)
341 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
343 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
344 (show_machine): Print subsystem ID.
346 * names.c: New name resolution engine supporting subsystem IDs.
348 * Released as version 1.07.
350 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
352 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
353 (show_bases): Honor the `cnt' argument.
354 (grow_tree): Parse CardBus headers in tree mode as well.
356 * pci.h: Updated CardBus header field description. I still don't
357 have the CardBus standard available, but OZ6832 specs contain
358 full description of all header fields supported by the chip.
360 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
364 * names.c (parse_name_list): Killed an unused variable.
366 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
367 if they are not defined by glibc (needed for glibc built on older
370 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
372 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
376 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
377 should be gone. Again thanks to Steve for bug report.
379 * filter.c (filter_parse_slot): Fixed ":x" type filters.
381 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
382 <steve@icarus.com> for reporting this.
384 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
386 * lspci.c (main), setpci.c (main): Implemented "--version".
390 * pciutils.h (PCIUTILS_VERSION): Added version string.
392 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
393 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
396 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
398 * pci.ids: More updates from Jens Maurer.
400 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
402 * pci.ids: Updates from Jens Maurer.
404 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
410 * setpci.c: Finished.
412 * lspci.c: Now able to fetch expansion ROM base from kernel device list
413 and print it if not in buscentric mode.
415 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
419 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
421 * lspci.8: Updated the documentation.
423 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
425 * filter.c: Introduced new generic device filter.
427 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
429 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
430 of PCI-to-PCI bridges in the tree format.
432 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
434 * lspci.c (show_machine): Added non-verbose mode of machine-readable
437 * pci.ids: Updates from Jens Maurer.
439 * Released as version 1.02.
441 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
443 * lspci.c: Added a "-m" switch for dumping machine-readable
444 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
446 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
448 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
449 if available. This should avoid all problems with official kernel
450 not synchronized to newer PCI code in CVS -- standard distribution
451 of pciutils now contains pci.h from current CVS kernel, pciutils
452 in CVS contain no pci.h and use the correct kernel include.
454 * Makefile: Fixed installation path for man pages.
456 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
460 * lspci.8: Created a man page.
462 * Releasing as version 1.0.
464 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
466 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
467 to all the C sources. This should eliminate problems with 32-bit compilers
470 * lspci.c (show_verbose): Recognize CardBus bridge header type.
471 (show_htype2): Stub routine.
472 (scan_config): Write sensible error message if the kernel denies reading of
473 upper part of the PCI config space.