1 2002-03-30 Martin Mares <mj@ucw.cz>
3 * lib/names.c (parse_name_list): End-of-line comments are no longer
4 supported. Hashes are now perfectly valid in all names and they start
5 a comment only at the start of the line.
7 * pci.ids: Synchronized with the PCI ID database.
9 2002-03-26 Martin Mares <mj@ucw.cz>
13 * Makefile: When the currently installed pci.ids file is newer than
14 the version to be installed, don't overwrite it. Suggested by
15 Jean Delvare <khali@linux-fr.org>.
17 2002-03-24 Martin Mares <mj@ucw.cz>
19 * lspci.c (show_pcix_bridge): Added PCI-X capability display.
20 Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
22 * lib/header.h: Added PCI-X stuff. Again by Jeff.
24 * Makefile (CFLAGS): -Werror is gone.
26 * lspci.c (format_agp_rate): Fixed AGP rate reporting.
28 * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
31 * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
32 or device hexadecimally, don't confuse it with chip vendor/device ID.
33 First reported by Marc Boucher <marc@mbsi.ca>.
35 2001-11-04 Martin Mares <mj@ucw.cz>
39 * pci.ids: Synced with the PCI ID Repository at SourceForge
40 (http://pciids.sourceforge.net/).
42 2000-08-25 Martin Mares <mj@albireo.ucw.cz>
44 * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
46 2000-06-13 Martin Mares <mj@albireo.ucw.cz>
48 * Makefile (uninstall): Fixed.
50 * pci.ids: ID updates.
52 2000-05-20 Martin Mares <mj@albireo.ucw.cz>
56 * pci.ids: ID updates.
58 * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
60 2000-05-04 Martin Mares <mj@albireo.ucw.cz>
62 * lspci.c (show_verbose): If the header type doesn't match device
63 class, just print a warning and still use the header type, assuming
66 2000-05-01 Martin Mares <mj@albireo.ucw.cz>
68 * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
70 * pci.ids: Updated Contemporary Control ARCnet card entries.
72 * pci.ids: Synchronized class list with latest PCI SIG documents.
74 2000-04-29 Martin Mares <mj@albireo.ucw.cz>
76 * lib/names.c (pci_lookup_name): Fixed the cheat.
78 * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
80 * pci.ids: Various ID updates.
82 2000-04-21 Martin Mares <mj@albireo.ucw.cz>
86 * pciutils.spec: Added German description.
88 * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
89 are the same as device ID and just output subsystem name according to
92 * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
94 * lib/pci.h: Added the correct typedefs for AIX.
96 * lib/generic.c (pci_generic_scan_bus): Export.
98 * lib/configure: Detect AIX. Use "echo '...\c'" instead of
99 "echo -n" if the shell isn't bash.
101 * lspci.c: Avoid using alloca() if not compiled by GCC.
102 (insert_dev): Avoid returning a void value.
104 * Makefile: Choose which install utility to use according to
105 OS type. Also use `-o' instead of `-or' in find arguments.
106 Part of the AIX port.
108 * lib/aix-device.c: Added AIX low-level interface. Contributed
109 by Dave Johnson <ddj@brown.edu>, thanks a lot!
111 * pci.ids: Few new ID's.
113 * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
114 when not compiled by GCC.
116 2000-04-17 Martin Mares <mj@albireo.ucw.cz>
120 * pci.ids: Added a large batch of ID's contributed by Gunther
121 Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
122 list with the 2.3.99pre6 kernel.
124 Thu Mar 9 13:11:39 2000 Martin Mares <mj@albireo.ucw.cz>
126 * lib/example.c: Added a simple example of how to use
129 * lspci.man, setpci.man: Revealed --version. Well spotted
132 * pci.ids: Added lots of new ID's and synced with 2.3.50.
134 Tue Feb 15 00:16:21 2000 Martin Mares <mj@albireo.ucw.cz>
138 * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
139 %{_mandir} to find the right location to install manual pages to.
143 * setpci.c (main): Don't crash when `-s' or `-d' is given with
146 Mon Jan 24 20:04:11 2000 Andreas Jaeger <aj@suse.de>
148 * lib/i386-ports.c: Include <asm/io.h> only on systems without
151 Mon Jan 24 11:24:43 2000 Martin Mares <mj@albireo.ucw.cz>
153 * Makefile: Modified to work with the Linux FHS brain-damaged idea
154 of putting man pages to /usr/share/man. Now we choose either /usr/man
155 or /usr/share/man depending on which one exists.
157 Sun Jan 23 10:52:34 2000 Martin Mares <mj@albireo.ucw.cz>
159 * pci.ids: Synced with Linux 2.3.40.
161 * Released as version 2.1.4.
163 Thu Jan 20 11:08:32 2000 Martin Mares <mj@albireo.ucw.cz>
165 * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
167 * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
169 * lspci.c (format_agp_rate): Better formatting of AGP rates.
173 * lib/configure: Added configuration for ia64 (the same as for Alpha).
174 Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
176 Thu Jan 13 23:01:52 2000 Martin Mares <mj@albireo.ucw.cz>
178 * Released as version 2.1.3.
182 * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
184 * lib/access.c: Corrected order of access methods -- it's wonderful how
185 long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
187 Sat Dec 11 23:34:48 1999 Martin Mares <mj@albireo.ucw.cz>
189 * Released as version 2.1.2.
191 * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
193 Sat Dec 4 13:11:03 1999 Martin Mares <mj@albireo.ucw.cz>
195 * Released as version 2.1.1.
197 * pci.ids: Several new ID's.
199 * setpci.c (exec_op): Don't forget to increment address after writing
200 single value, so that `30.b=12,34,56,78' works as expected. Reported
201 by Petr Soucek <petr@ryston.cz>.
203 Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz>
205 * lspci.c (show_terse): If prog-if is zero, but it's present in the
208 Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
210 * Released as version 2.1.
212 * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
213 lots of contributed entries.
215 Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
217 * pci.ids: Added lots of subsystem definitions.
219 Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
221 * setpci.man: Better example.
223 * lspci.c: Resolve prog-if names.
225 * lib/names.c: Adapted to new pci.ids syntax.
227 * pci.ids: Reorganized the pci.ids file. Subsystems are listed
228 under devices, classes can optionally contain prog-if information.
229 New ID's, as usually.
231 Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
233 * pci.ids: New ID's. As usually.
235 * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
236 unless we're vvvery verbose.
238 Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
240 * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
242 Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
244 * pci.ids: New ID's. Again.
246 Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
248 * lspci.c (show_size): Don't show size if it's zero (usually
249 due to bus-centric mode being enabled).
251 Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
253 * lib/pci.h: Types are OS dependent.
255 * lib/internal.h: Byte order hacks are OS dependent.
257 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
259 * lib/Makefile, lib/access.c: Added fbsd-device target.
261 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
262 incorrectly set to device ID.
264 * README: Added a note that we support FreeBSD.
266 * Makefile (PREFIX, ROOT): Set it depending on the OS.
267 (%.8): Grrr, BSD date is not able to convert date formats the same way
268 as GNU date does. Use sed instead.
269 (install): Use `-c' when calling install.
271 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
272 by Jari Kirma <kirma@cs.hut.fi>.
274 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
275 and pwrite only when we are certain it's safe (i.e., glibc 2.1
276 on all architectures or any libc on a i386 where we really know
277 how to use syscalls directly). In all other cases, emulate it
278 with lseek/read/write.
280 * pci.ids: Some more IDs.
282 Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
284 * pci.ids: Added IDs of parallel port controller cards as sent
285 by Tim Waugh <tim@cyberelk.demon.co.uk>.
287 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
289 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
291 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
294 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
295 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
296 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
297 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
300 * lspci.c (show_msi): Added dumping of the MSI capability.
301 (show_slotid): The same for SlotID capability.
302 (show_caps): Seperated capability dumping, because it should
303 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
304 layout of htype2, so I'm a bit unsure about it wrt capabilities
305 -- they at least have to live somewhere else since address 0x34
306 is already defined differently in htype2.
308 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
309 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
310 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
312 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
313 (required by the PCI 2.2 specs).
315 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
317 * lspci.c (show_size): Added new function for dumping of region sizes.
318 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
321 * lib/pci.h (struct pci_dev): known_fields moved to the public part
324 * Added support for region sizes. Needs support in the kernel, because
325 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
326 now returns a bitmask of what fields were really read.
328 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
331 Added `uninstall' target - removes all traces of pciutils.
333 - Lots of cleanups in the ATI, S3, Adaptec vendors.
334 - Changed Compaq QVision 1280/p definitions, as it's not possible
335 to determine the revision from the device ID.
336 - Same for the Tseng ET4000.
337 The id's said I had a rev C, when it was actually a rev B.
338 - Removed some unnecessary strings
339 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
340 `Ethernet card'. This should be determined from config space.
341 - Lots of other new vendors & devices
342 - Other additional small cleanups.
344 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
346 * lib/names.c (pci_lookup_name): When device ID lookup
347 fails, return hexadecimal device ID instead of vendor ID.
348 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
349 I've just extended the fix to subsystem ID's.
351 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
353 * lspci.c (show_agp): Bug fix from Petr Vandrovec
354 <vandrove@vc.cvut.cz>. The command register was displayed
357 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
359 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
360 numbers if not supplied by the libc.
362 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
364 * Released the whole package as version 2.0.
366 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
368 * pci.ids: Added several new ID's contributed by people
369 on the linux-pci list.
371 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
373 * lspci.c: Display I/O addresses correctly on sparc64.
374 * lib/header.h: Ditto.
376 * lib/configure: On sparc set HAVE_64BIT* as well, we want
377 a binary which works on both 32bit and 64bit SPARCs.
379 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
381 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
384 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
386 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
388 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
389 as a multi-function device, because several single-function devices
390 don't decode the function bits at all.
392 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
394 * Makefile (install): Don't use "-o root -g root" for installation
395 since it breaks on machines where programs are not installed by root.
396 Reported by Richard Gooch <rgooch@atnf.csiro.au>
398 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
400 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
402 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
403 or 64-bit depending on CPU.
405 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
406 according to bus address width.
408 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
410 * Released as 1.99.4.
412 * lspci.c: Capability list parser now recognizes both AGP
413 registers and PCI Power Management registers (the latter
414 is mainly guesswork based on DEC/Intel 21153 bridge specs
415 since I don't have the PCI Power Management document).
417 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
420 * lspci.c: Added bridge checks to bus mapping code.
422 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
424 * lspci.c: Implemented bus mapping mode (-M).
426 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
427 (show): Split to show() and show_device().
429 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
430 set it to the real access method afterwards.
432 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
434 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
435 don't check PCI_COMMAND for I/O and memory enables.
437 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
439 * Makefile: Added target `release' which substitutes new version
440 number to .spec, .lsm and README. Also rewrote target `dist'.
442 * Released as 1.99.3.
444 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
446 * lib/header.h: Until kernel adopts new layout of PCI
447 includes (i.e., separate declaration of header structure,
448 functions and device IDs), which is not going to happen
449 before 2.3, we'll use our own definiton of the header.
451 * lspci.c (show_verbose): Display `Cap' flag in device status.
453 * lspci.c (show_htype0): Display capability lists whereever
454 available. The only capability name we recognize now is `AGP'.
455 Unfortunately, capabilities are stored in device-dependent
456 portion of the configuration space and are thus available
457 only to root unless you read a dump.
459 * lspci.c (scan_devices): Use cache instead of buffering.
461 * lib/buffer.c: Removed (obsoleted by the cache).
463 * lib/access.c: Added general caching mechanism.
465 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
467 * pci.ids: Added few devices.
469 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
471 * Version string is now defined in top-level Makefile, exported
472 to the configure script and also substituted to man pages.
474 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
475 (show_verbose): Rewrote interrupt display logic.
477 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
479 * lib/configure: Rewrote detection of Linux versions. Now it
480 works on 2.0 kernels (only with direct/dump access, of course).
482 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
485 * lib/proc.c (proc_read, proc_write): Distinguish between short
486 read/write and real errors.
488 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
489 libpci respects buscentric mode automatically.
491 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
492 bytes of header (the whole standard part).
494 * common.c: pcilib options are now all uppercase. Also moved
495 PCI access debugging option here.
497 * Released as 1.99.2.
499 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
501 * Wrote configure script and rewrote Makefiles.
503 * Removed few unused variables.
505 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
507 * common.c: Moved several functions used in both setpci and lspci
508 here. This includes parsing of libpci-related options.
510 * More library tweaks.
512 * filter.c, names.c: Moved to library.
514 * setpci: Rewritten to use the library.
516 * Released as 1.99.1.
518 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
520 * lspci.c (scan_devices): For cardbus bridges, read first 128
521 bytes of config space to get full standard header.
523 * Makefile (CFLAGS): Removed "-Wno-unused".
525 * Started the "New Generation" branch and introduced the
528 * lspci: Rewritten to use the library.
530 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
532 * Released as version 1.10.
534 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
536 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
537 Dag Wieers <dag@digibel.be>.
539 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
541 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
543 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
545 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
547 * Released as version 1.09.
549 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
551 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
552 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
554 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
556 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
558 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
560 * Released as version 1.08.
562 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
564 * lspci.8: Changed warning about lspci -xxx.
566 * lspci.c: Require "-xxx" for full configuration space dump, so that
567 it's impossible to crash the machine by single typo.
569 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
571 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
573 * lspci.c (show_bases): Better displaying of unassigned and
574 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
577 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
579 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
580 (thanks to Geert Uytterhoeven for finding this out)
582 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
584 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
585 (show_machine): Print subsystem ID.
587 * names.c: New name resolution engine supporting subsystem IDs.
589 * Released as version 1.07.
591 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
593 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
594 (show_bases): Honor the `cnt' argument.
595 (grow_tree): Parse CardBus headers in tree mode as well.
597 * pci.h: Updated CardBus header field description. I still don't
598 have the CardBus standard available, but OZ6832 specs contain
599 full description of all header fields supported by the chip.
601 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
605 * names.c (parse_name_list): Killed an unused variable.
607 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
608 if they are not defined by glibc (needed for glibc built on older
611 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
613 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
617 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
618 should be gone. Again thanks to Steve for bug report.
620 * filter.c (filter_parse_slot): Fixed ":x" type filters.
622 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
623 <steve@icarus.com> for reporting this.
625 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
627 * lspci.c (main), setpci.c (main): Implemented "--version".
631 * pciutils.h (PCIUTILS_VERSION): Added version string.
633 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
634 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
637 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
639 * pci.ids: More updates from Jens Maurer.
641 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
643 * pci.ids: Updates from Jens Maurer.
645 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
651 * setpci.c: Finished.
653 * lspci.c: Now able to fetch expansion ROM base from kernel device list
654 and print it if not in buscentric mode.
656 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
660 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
662 * lspci.8: Updated the documentation.
664 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
666 * filter.c: Introduced new generic device filter.
668 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
670 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
671 of PCI-to-PCI bridges in the tree format.
673 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
675 * lspci.c (show_machine): Added non-verbose mode of machine-readable
678 * pci.ids: Updates from Jens Maurer.
680 * Released as version 1.02.
682 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
684 * lspci.c: Added a "-m" switch for dumping machine-readable
685 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
687 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
689 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
690 if available. This should avoid all problems with official kernel
691 not synchronized to newer PCI code in CVS -- standard distribution
692 of pciutils now contains pci.h from current CVS kernel, pciutils
693 in CVS contain no pci.h and use the correct kernel include.
695 * Makefile: Fixed installation path for man pages.
697 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
701 * lspci.8: Created a man page.
703 * Releasing as version 1.0.
705 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
707 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
708 to all the C sources. This should eliminate problems with 32-bit compilers
711 * lspci.c (show_verbose): Recognize CardBus bridge header type.
712 (show_htype2): Stub routine.
713 (scan_config): Write sensible error message if the kernel denies reading of
714 upper part of the PCI config space.