1 2004-05-28 Martin Mares <mj@ucw.cz>
3 * Released as 2.1.99-test4.
5 * lspci.c (show_verbose): Header type 1 is probably legal for all
6 types of bridges, not only for PCI-to-PCI bridges.
8 * lspci.c (format_agp_rate): Write "x16", not "x@".
9 (show_agp): rate[] could overflow.
10 Bugs reported by Jakub Bogusz <qboosh@pld-linux.org>.
12 * lspci.c (show_ht_*): Show HyperTransport capability with all its
13 details. Once again code by Maciej simplified (i.e., possibly broken)
16 * lib/header.h: Added declarations of HyperTransport capability.
17 Again thanks to Maciej.
19 * lspci.c: Decode all bits of the secondary status word in type 1 headers.
20 Thanks to Maciej W. Rozycki <macro@ds2.pg.gda.pl> for the patch.
22 2003-12-27 Martin Mares <mj@ucw.cz>
24 * Released as 2.1.99-test3.
26 * lspci.man, setpci.man: Document domains and correct spelling.
28 * lib/dump.c (dump_init): Added ability to read domain numbers.
30 * lspci.c: Devices in domains different from 0 have their slot number
31 printed as "<domain>:<bus>:<slot>.<func>". Tree view supports domains
34 * lib/filter.c: Slot filters understand domains.
36 * lib/generic.c: Mention the domain in slot numbers in all error messages.
38 * lib/internal.h: The #ifdef for Linux <asm/byteorder.h> was wrong.
40 * lib/access.c (pci_get_dev): Added support for domains.
42 * lib/sysfs.c (sysfs_scan): Read vendor and device ID from the config
43 registers (or to be precise, leave it for the generic parts of the pcilib
44 to do so) instead of reading them from the sysfs. It's faster this way.
46 * lspci.c (show_pcix): Don't touch pci_dev->hdrtype, it's an internal
47 variable. Better read it from the config registers (it's cached anyway).
49 * lib/sysfs.c (sysfs_scan), lib/proc.c (proc_scan): Don't read the hdrtype.
50 lib/generic.c (pci_generic_fill_info): If hdrtype is -1 (unset), read it.
51 Saves lots of unnecessary file accesses.
53 * lib/pci.h (PCIADDR_PORT_FMT): Use %llx instead of %Lx, because the latter
54 is not supported by all C libraries.
56 * Makefile: Always enter the lib directory (remember that we don't have
57 full dependecies for the library in the top-level Makefile; hmmm, another
58 thing to rewrite some day).
60 * lib/sysfs.c: Added Linux sysfs access method based on the patch
61 written by Matthew Wilcox <willy@fc.hp.com>.
63 * lib/proc.c: Renamed the access method name from "/proc/bus/pci" to "Linux-proc".
65 * lib/pread.h: The hacks to support pread on various versions
66 of Linux libc moved there.
68 * lib/proc.c (proc_setup): The return value of snprintf() varies
69 between glibc versions, so we need to check both for a negative
70 values and for too large values.
72 * Removed last few references to the "Linux PCI Utilities", the
73 package is pretty cross-platform now :)
75 2003-12-27 Martin Mares <mj@ucw.cz>
77 * Released as 2.1.99-test2.
79 * README, pciutils.lsm, pciutils.spec: Use @VERSION@ to make the
80 release scripts insert the current version. "make release" is gone.
82 * maint/release, maint/release.pm: Added a new system of scripts for
83 making releases including inter-version diffs etc.
85 * Makefile: Cleaned up.
87 * lib/fbsd-device.c: I patched another copy of this file by mistake,
88 this time the version checks should be right.
90 2003-12-27 Martin Mares <mj@ucw.cz>
92 * Released as 2.1.99-test1.
94 * pciutils.h, common.c, lspci.man, setpci.man, lib/internal.h:
95 Remove shadows of the syscall access method which was never
98 * update-pciids.sh: Try to preserve permissions of the old file
99 if chmod supports --reference. Should close Debian Bug #223740.
101 * lib/proc.c (proc_setup): Increased path name length limit to 1024.
102 Thanks for Redhat and Mandrake for inspiration.
104 * lib/configure: Recognize ppc and ppc64, both have 64-bit addresses.
105 Grabbed from Redhat (Fedora) patches.
107 2003-12-27 Martin Mares <mj@ucw.cz>
109 Merged bug fixes from Debian patches:
111 * lspci.c (show_verbose): "Cache Line Size" should be capitalized.
113 * lspci.c (show_pcix_nobridge): Added a missing newline.
115 * lib/proc.c (proc_scan): When reading the header type, don't
116 forget to clear the topmost bit indicating that the device has
119 2003-12-27 Martin Mares <mj@ucw.cz>
121 Updated the FreeBSD port. Thanks to Samy Al Bahra <samy@kerneled.com>
124 * lib/Makefile: Add ${FREEBSD_SYS} to the include path if it's defined.
125 * lib/fbsd-device.c: Select the right set of system includes according
126 to __FreeBSD_version.
128 2003-12-27 Martin Mares <mj@ucw.cz>
130 Merged support for Solaris on i386 by Bill Moore <billm@eng.sun.com>
133 * lib/configure: Recognize SunOS.
134 * lib/internal.h: Learn how to recognize byte order on SunOS.
135 * lib/i386-ports.c: Split OS-dependent I/O port access from i386-ports.c.
136 * lib/i386-io-linux.h: Linux specific part.
137 * lib/i386-io-hurd.h: GNU/Hurd specific part.
138 * lib/i386-io-sunos.h: SunOS specific part.
140 2003-12-26 Martin Mares <mj@ucw.cz>
142 * lib/header.h (PCI_*_MASK): Cast to pciaddr_t explicitly.
144 * lib/pci.h: Types declared in <sys/types.h> should be usable on all
145 platforms we currently support, so kill the forest of #ifdef's and
146 use them in all cases.
148 * lib/pci.h: Use ULONG_MASK to decide whether we should use long
149 or long long to represent a 64-bit address. Killed HAVE_LONG_ADDRESS.
150 Define format strings for addresses, port numbers and IRQ numbers
153 * lib/proc.c (proc_scan): Use PCIADDR_T_FMT for scanf'ing addresses.
155 2003-12-26 Marco Gerards <metgerards@student.han.nl>
157 Added support for the GNU Hurd (cleaned up by Martin Mares):
159 * lib/configure [GNU]: Use the i386 ports for configuration access.
160 * lib/i386-ports.c: Don't call iopl() on the Hurd.
161 * lib/pci.h [OS_GNU]: Include <sys/types.h> and use it for defining
164 2003-12-26 Martin Mares <mj@ucw.cz>
166 * lspci.c (show_pcix_bridge, show_pcix_nobridge): Don't forget to call
167 config_fetch() to ensure that the registers have been read. Thanks to
168 Bill Wood <bill.wood@hp.com> for the patch.
170 * lspci.c: Ensure that failure of config_fetch() is handled correctly
173 * lspci.man: There was one more explicit reference to /usr/share/pci.ids.
174 Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <macro@ds2.pg.gda.pl>.
176 * setpci.c (main): Better error messages.
178 * setpci.c (ex_op): The demo mode should disable only writing, not reading.
180 * setpci.man: The documentation was inconsistent on what should -D do.
181 Document the new behaviour.
183 * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
184 the GCC specific __attribute__((noreturn)) and killed the hack with
185 redefining __attribute__ on non-GCC compilers.
187 * Makefile: Added missing dependencies. Parallel builds work now.
188 Problem reported by Andreas Haumer <andreas@xss.co.at>, but I chose
191 * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
192 command every time $(MANDIR) is referenced.
194 * lspci.c (main): The error message for `lspci -s' incorrectly mentioned
195 a `-f' switch. Reported by Steve Finney <Steve.Finney@SpirentCom.COM>.
197 * lib/generic.c: Removed memory leak in pci_generic_bus_scan().
198 Reported by Gary Parnes <gary_parnes@terago.com>.
200 * Replaced obsolete syntax of __attribute__((unused)) in the middle of
201 parameter declarations (which is no longer supported by GCC 3.1) by the
202 current syntax (attribute at the end). Thanks to pixel@mandrakesoft.com
203 for reporting this problem.
205 * Removed CVS $Id$ tags from all files.
207 * Makefile: Added some more warnings.
209 * setpci.c: Cleaned up mask/value code.
211 2003-12-08 Thayne Harbaugh <tharbaugh@lnxi.com>
213 * setpci.c: Individual bits to be set can be specified as <value>:<mask>.
215 2003-11-29 Martin Mares <mj@ucw.cz>
217 * Imported the pciutils sources to my Arch repository. Good-bye, CVS.
219 2003-01-04 Martin Mares <mj@ucw.cz>
221 * Released as 2.1.11.
223 * Makefile: Changed configuration of installation directories --
224 all paths are now set at the top of the Makefile instead of being
225 scattered between the installation rules. The default installation
226 now goes always to /usr/local regardless of the OS as most distributions
227 already contain some version of pciutils and we don't want custom
228 installations to interfere with the default ones.
230 * Makefile: Removed a couple of ancient install hacks: we no longer
231 try to avoid overwriting a newer pci.ids file (users are now expected
232 to use update-ids) and we don't try to remove /etc/pci.ids (a long time
233 has passed since the last version which used it).
235 * Makefile: Paths to pci.ids in man pages automatically get the right path.
237 * Added the update-ids utility.
239 * lib: Removed partially implemented "syscall" access method which will
240 probably never be needed.
242 2002-12-27 Martin Mares <mj@ucw.cz>
244 * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.
246 * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
247 discontiguous numbering of functions. This is already present in the Linux
248 kernel for several years, but I forgot to update pciutils as well.
250 2002-12-26 Martin Mares <mj@ucw.cz>
252 * lib/header.h, lspci.c: Dump AGP3 flags and speeds.
254 * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
255 there is no reason to prefer the kernel version.
257 * lib/proc.c (proc_scan): Don't forget to initialize hdrtype.
259 * Added preliminary version of NetBSD support by Quentin Garnier
260 <netbsd@quatriemek.com>.
262 2002-04-06 Martin Mares <mj@ucw.cz>
264 * lspci.c: Mention "-xxx" in the help.
266 2002-03-30 Martin Mares <mj@ucw.cz>
268 * Released as 2.1.10.
270 * Removed pci.ids from the CVS as they are now maintained separately.
271 They are still included in the tarball, but if you are building pciutils
272 from CVS sources or you want to get a newer ID file than the one distributed,
273 just use "make update-ids" to download the most recent snapshot from
276 * Makefile, README: Updated accordingly.
278 * Makefile: Added a couple of maintenance targets.
280 * maint/*: Maintainer's utilities now reside here (present only in CVS,
283 * lib/names.c (parse_name_list): End-of-line comments are no longer
284 supported. Hashes are now perfectly valid in all names and they start
285 a comment only at the start of the line.
287 2002-03-26 Martin Mares <mj@ucw.cz>
291 * Makefile: When the currently installed pci.ids file is newer than
292 the version to be installed, don't overwrite it. Suggested by
293 Jean Delvare <khali@linux-fr.org>.
295 2002-03-24 Martin Mares <mj@ucw.cz>
297 * lspci.c (show_pcix_bridge): Added PCI-X capability display.
298 Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
300 * lib/header.h: Added PCI-X stuff. Again by Jeff.
302 * Makefile (CFLAGS): -Werror is gone.
304 * lspci.c (format_agp_rate): Fixed AGP rate reporting.
306 * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
309 * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
310 or device hexadecimally, don't confuse it with chip vendor/device ID.
311 First reported by Marc Boucher <marc@mbsi.ca>.
313 2001-11-04 Martin Mares <mj@ucw.cz>
317 * pci.ids: Synced with the PCI ID Repository at SourceForge
318 (http://pciids.sourceforge.net/).
320 2000-08-25 Martin Mares <mj@albireo.ucw.cz>
322 * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
324 2000-06-13 Martin Mares <mj@albireo.ucw.cz>
326 * Makefile (uninstall): Fixed.
328 * pci.ids: ID updates.
330 2000-05-20 Martin Mares <mj@albireo.ucw.cz>
334 * pci.ids: ID updates.
336 * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
338 2000-05-04 Martin Mares <mj@albireo.ucw.cz>
340 * lspci.c (show_verbose): If the header type doesn't match device
341 class, just print a warning and still use the header type, assuming
344 2000-05-01 Martin Mares <mj@albireo.ucw.cz>
346 * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
348 * pci.ids: Updated Contemporary Control ARCnet card entries.
350 * pci.ids: Synchronized class list with latest PCI SIG documents.
352 2000-04-29 Martin Mares <mj@albireo.ucw.cz>
354 * lib/names.c (pci_lookup_name): Fixed the cheat.
356 * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
358 * pci.ids: Various ID updates.
360 2000-04-21 Martin Mares <mj@albireo.ucw.cz>
364 * pciutils.spec: Added German description.
366 * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
367 are the same as device ID and just output subsystem name according to
370 * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
372 * lib/pci.h: Added the correct typedefs for AIX.
374 * lib/generic.c (pci_generic_scan_bus): Export.
376 * lib/configure: Detect AIX. Use "echo '...\c'" instead of
377 "echo -n" if the shell isn't bash.
379 * lspci.c: Avoid using alloca() if not compiled by GCC.
380 (insert_dev): Avoid returning a void value.
382 * Makefile: Choose which install utility to use according to
383 OS type. Also use `-o' instead of `-or' in find arguments.
384 Part of the AIX port.
386 * lib/aix-device.c: Added AIX low-level interface. Contributed
387 by Dave Johnson <ddj@brown.edu>, thanks a lot!
389 * pci.ids: Few new ID's.
391 * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
392 when not compiled by GCC.
394 2000-04-17 Martin Mares <mj@albireo.ucw.cz>
398 * pci.ids: Added a large batch of ID's contributed by Gunther
399 Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
400 list with the 2.3.99pre6 kernel.
402 Thu Mar 9 13:11:39 2000 Martin Mares <mj@albireo.ucw.cz>
404 * lib/example.c: Added a simple example of how to use
407 * lspci.man, setpci.man: Revealed --version. Well spotted
410 * pci.ids: Added lots of new ID's and synced with 2.3.50.
412 Tue Feb 15 00:16:21 2000 Martin Mares <mj@albireo.ucw.cz>
416 * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
417 %{_mandir} to find the right location to install manual pages to.
421 * setpci.c (main): Don't crash when `-s' or `-d' is given with
424 Mon Jan 24 20:04:11 2000 Andreas Jaeger <aj@suse.de>
426 * lib/i386-ports.c: Include <asm/io.h> only on systems without
429 Mon Jan 24 11:24:43 2000 Martin Mares <mj@albireo.ucw.cz>
431 * Makefile: Modified to work with the Linux FHS brain-damaged idea
432 of putting man pages to /usr/share/man. Now we choose either /usr/man
433 or /usr/share/man depending on which one exists.
435 Sun Jan 23 10:52:34 2000 Martin Mares <mj@albireo.ucw.cz>
437 * pci.ids: Synced with Linux 2.3.40.
439 * Released as version 2.1.4.
441 Thu Jan 20 11:08:32 2000 Martin Mares <mj@albireo.ucw.cz>
443 * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
445 * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
447 * lspci.c (format_agp_rate): Better formatting of AGP rates.
451 * lib/configure: Added configuration for ia64 (the same as for Alpha).
452 Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
454 Thu Jan 13 23:01:52 2000 Martin Mares <mj@albireo.ucw.cz>
456 * Released as version 2.1.3.
460 * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
462 * lib/access.c: Corrected order of access methods -- it's wonderful how
463 long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
465 Sat Dec 11 23:34:48 1999 Martin Mares <mj@albireo.ucw.cz>
467 * Released as version 2.1.2.
469 * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
471 Sat Dec 4 13:11:03 1999 Martin Mares <mj@albireo.ucw.cz>
473 * Released as version 2.1.1.
475 * pci.ids: Several new ID's.
477 * setpci.c (exec_op): Don't forget to increment address after writing
478 single value, so that `30.b=12,34,56,78' works as expected. Reported
479 by Petr Soucek <petr@ryston.cz>.
481 Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz>
483 * lspci.c (show_terse): If prog-if is zero, but it's present in the
486 Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
488 * Released as version 2.1.
490 * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
491 lots of contributed entries.
493 Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
495 * pci.ids: Added lots of subsystem definitions.
497 Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
499 * setpci.man: Better example.
501 * lspci.c: Resolve prog-if names.
503 * lib/names.c: Adapted to new pci.ids syntax.
505 * pci.ids: Reorganized the pci.ids file. Subsystems are listed
506 under devices, classes can optionally contain prog-if information.
507 New ID's, as usually.
509 Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
511 * pci.ids: New ID's. As usually.
513 * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
514 unless we're vvvery verbose.
516 Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
518 * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
520 Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
522 * pci.ids: New ID's. Again.
524 Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
526 * lspci.c (show_size): Don't show size if it's zero (usually
527 due to bus-centric mode being enabled).
529 Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
531 * lib/pci.h: Types are OS dependent.
533 * lib/internal.h: Byte order hacks are OS dependent.
535 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
537 * lib/Makefile, lib/access.c: Added fbsd-device target.
539 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
540 incorrectly set to device ID.
542 * README: Added a note that we support FreeBSD.
544 * Makefile (PREFIX, ROOT): Set it depending on the OS.
545 (%.8): Grrr, BSD date is not able to convert date formats the same way
546 as GNU date does. Use sed instead.
547 (install): Use `-c' when calling install.
549 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
550 by Jari Kirma <kirma@cs.hut.fi>.
552 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
553 and pwrite only when we are certain it's safe (i.e., glibc 2.1
554 on all architectures or any libc on a i386 where we really know
555 how to use syscalls directly). In all other cases, emulate it
556 with lseek/read/write.
558 * pci.ids: Some more IDs.
560 Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
562 * pci.ids: Added IDs of parallel port controller cards as sent
563 by Tim Waugh <tim@cyberelk.demon.co.uk>.
565 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
567 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
569 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
572 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
573 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
574 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
575 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
578 * lspci.c (show_msi): Added dumping of the MSI capability.
579 (show_slotid): The same for SlotID capability.
580 (show_caps): Seperated capability dumping, because it should
581 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
582 layout of htype2, so I'm a bit unsure about it wrt capabilities
583 -- they at least have to live somewhere else since address 0x34
584 is already defined differently in htype2.
586 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
587 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
588 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
590 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
591 (required by the PCI 2.2 specs).
593 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
595 * lspci.c (show_size): Added new function for dumping of region sizes.
596 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
599 * lib/pci.h (struct pci_dev): known_fields moved to the public part
602 * Added support for region sizes. Needs support in the kernel, because
603 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
604 now returns a bitmask of what fields were really read.
606 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
609 Added `uninstall' target - removes all traces of pciutils.
611 - Lots of cleanups in the ATI, S3, Adaptec vendors.
612 - Changed Compaq QVision 1280/p definitions, as it's not possible
613 to determine the revision from the device ID.
614 - Same for the Tseng ET4000.
615 The id's said I had a rev C, when it was actually a rev B.
616 - Removed some unnecessary strings
617 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
618 `Ethernet card'. This should be determined from config space.
619 - Lots of other new vendors & devices
620 - Other additional small cleanups.
622 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
624 * lib/names.c (pci_lookup_name): When device ID lookup
625 fails, return hexadecimal device ID instead of vendor ID.
626 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
627 I've just extended the fix to subsystem ID's.
629 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
631 * lspci.c (show_agp): Bug fix from Petr Vandrovec
632 <vandrove@vc.cvut.cz>. The command register was displayed
635 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
637 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
638 numbers if not supplied by the libc.
640 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
642 * Released the whole package as version 2.0.
644 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
646 * pci.ids: Added several new ID's contributed by people
647 on the linux-pci list.
649 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
651 * lspci.c: Display I/O addresses correctly on sparc64.
652 * lib/header.h: Ditto.
654 * lib/configure: On sparc set HAVE_64BIT* as well, we want
655 a binary which works on both 32bit and 64bit SPARCs.
657 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
659 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
662 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
664 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
666 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
667 as a multi-function device, because several single-function devices
668 don't decode the function bits at all.
670 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
672 * Makefile (install): Don't use "-o root -g root" for installation
673 since it breaks on machines where programs are not installed by root.
674 Reported by Richard Gooch <rgooch@atnf.csiro.au>
676 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
678 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
680 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
681 or 64-bit depending on CPU.
683 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
684 according to bus address width.
686 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
688 * Released as 1.99.4.
690 * lspci.c: Capability list parser now recognizes both AGP
691 registers and PCI Power Management registers (the latter
692 is mainly guesswork based on DEC/Intel 21153 bridge specs
693 since I don't have the PCI Power Management document).
695 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
698 * lspci.c: Added bridge checks to bus mapping code.
700 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
702 * lspci.c: Implemented bus mapping mode (-M).
704 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
705 (show): Split to show() and show_device().
707 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
708 set it to the real access method afterwards.
710 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
712 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
713 don't check PCI_COMMAND for I/O and memory enables.
715 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
717 * Makefile: Added target `release' which substitutes new version
718 number to .spec, .lsm and README. Also rewrote target `dist'.
720 * Released as 1.99.3.
722 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
724 * lib/header.h: Until kernel adopts new layout of PCI
725 includes (i.e., separate declaration of header structure,
726 functions and device IDs), which is not going to happen
727 before 2.3, we'll use our own definiton of the header.
729 * lspci.c (show_verbose): Display `Cap' flag in device status.
731 * lspci.c (show_htype0): Display capability lists whereever
732 available. The only capability name we recognize now is `AGP'.
733 Unfortunately, capabilities are stored in device-dependent
734 portion of the configuration space and are thus available
735 only to root unless you read a dump.
737 * lspci.c (scan_devices): Use cache instead of buffering.
739 * lib/buffer.c: Removed (obsoleted by the cache).
741 * lib/access.c: Added general caching mechanism.
743 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
745 * pci.ids: Added few devices.
747 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
749 * Version string is now defined in top-level Makefile, exported
750 to the configure script and also substituted to man pages.
752 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
753 (show_verbose): Rewrote interrupt display logic.
755 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
757 * lib/configure: Rewrote detection of Linux versions. Now it
758 works on 2.0 kernels (only with direct/dump access, of course).
760 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
763 * lib/proc.c (proc_read, proc_write): Distinguish between short
764 read/write and real errors.
766 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
767 libpci respects buscentric mode automatically.
769 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
770 bytes of header (the whole standard part).
772 * common.c: pcilib options are now all uppercase. Also moved
773 PCI access debugging option here.
775 * Released as 1.99.2.
777 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
779 * Wrote configure script and rewrote Makefiles.
781 * Removed few unused variables.
783 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
785 * common.c: Moved several functions used in both setpci and lspci
786 here. This includes parsing of libpci-related options.
788 * More library tweaks.
790 * filter.c, names.c: Moved to library.
792 * setpci: Rewritten to use the library.
794 * Released as 1.99.1.
796 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
798 * lspci.c (scan_devices): For cardbus bridges, read first 128
799 bytes of config space to get full standard header.
801 * Makefile (CFLAGS): Removed "-Wno-unused".
803 * Started the "New Generation" branch and introduced the
806 * lspci: Rewritten to use the library.
808 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
810 * Released as version 1.10.
812 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
814 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
815 Dag Wieers <dag@digibel.be>.
817 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
819 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
821 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
823 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
825 * Released as version 1.09.
827 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
829 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
830 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
832 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
834 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
836 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
838 * Released as version 1.08.
840 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
842 * lspci.8: Changed warning about lspci -xxx.
844 * lspci.c: Require "-xxx" for full configuration space dump, so that
845 it's impossible to crash the machine by single typo.
847 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
849 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
851 * lspci.c (show_bases): Better displaying of unassigned and
852 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
855 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
857 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
858 (thanks to Geert Uytterhoeven for finding this out)
860 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
862 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
863 (show_machine): Print subsystem ID.
865 * names.c: New name resolution engine supporting subsystem IDs.
867 * Released as version 1.07.
869 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
871 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
872 (show_bases): Honor the `cnt' argument.
873 (grow_tree): Parse CardBus headers in tree mode as well.
875 * pci.h: Updated CardBus header field description. I still don't
876 have the CardBus standard available, but OZ6832 specs contain
877 full description of all header fields supported by the chip.
879 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
883 * names.c (parse_name_list): Killed an unused variable.
885 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
886 if they are not defined by glibc (needed for glibc built on older
889 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
891 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
895 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
896 should be gone. Again thanks to Steve for bug report.
898 * filter.c (filter_parse_slot): Fixed ":x" type filters.
900 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
901 <steve@icarus.com> for reporting this.
903 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
905 * lspci.c (main), setpci.c (main): Implemented "--version".
909 * pciutils.h (PCIUTILS_VERSION): Added version string.
911 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
912 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
915 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
917 * pci.ids: More updates from Jens Maurer.
919 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
921 * pci.ids: Updates from Jens Maurer.
923 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
929 * setpci.c: Finished.
931 * lspci.c: Now able to fetch expansion ROM base from kernel device list
932 and print it if not in buscentric mode.
934 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
938 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
940 * lspci.8: Updated the documentation.
942 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
944 * filter.c: Introduced new generic device filter.
946 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
948 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
949 of PCI-to-PCI bridges in the tree format.
951 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
953 * lspci.c (show_machine): Added non-verbose mode of machine-readable
956 * pci.ids: Updates from Jens Maurer.
958 * Released as version 1.02.
960 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
962 * lspci.c: Added a "-m" switch for dumping machine-readable
963 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
965 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
967 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
968 if available. This should avoid all problems with official kernel
969 not synchronized to newer PCI code in CVS -- standard distribution
970 of pciutils now contains pci.h from current CVS kernel, pciutils
971 in CVS contain no pci.h and use the correct kernel include.
973 * Makefile: Fixed installation path for man pages.
975 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
979 * lspci.8: Created a man page.
981 * Releasing as version 1.0.
983 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
985 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
986 to all the C sources. This should eliminate problems with 32-bit compilers
989 * lspci.c (show_verbose): Recognize CardBus bridge header type.
990 (show_htype2): Stub routine.
991 (scan_config): Write sensible error message if the kernel denies reading of
992 upper part of the PCI config space.