1 Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz>
3 * lspci.c (show_terse): If prog-if is zero, but it's present in the
6 Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
8 * Released as version 2.1.
10 * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
11 lots of contributed entries.
13 Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
15 * pci.ids: Added lots of subsystem definitions.
17 Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
19 * setpci.man: Better example.
21 * lspci.c: Resolve prog-if names.
23 * lib/names.c: Adapted to new pci.ids syntax.
25 * pci.ids: Reorganized the pci.ids file. Subsystems are listed
26 under devices, classes can optionally contain prog-if information.
29 Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
31 * pci.ids: New ID's. As usually.
33 * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
34 unless we're vvvery verbose.
36 Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
38 * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
40 Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
42 * pci.ids: New ID's. Again.
44 Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
46 * lspci.c (show_size): Don't show size if it's zero (usually
47 due to bus-centric mode being enabled).
49 Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
51 * lib/pci.h: Types are OS dependent.
53 * lib/internal.h: Byte order hacks are OS dependent.
55 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
57 * lib/Makefile, lib/access.c: Added fbsd-device target.
59 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
60 incorrectly set to device ID.
62 * README: Added a note that we support FreeBSD.
64 * Makefile (PREFIX, ROOT): Set it depending on the OS.
65 (%.8): Grrr, BSD date is not able to convert date formats the same way
66 as GNU date does. Use sed instead.
67 (install): Use `-c' when calling install.
69 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
70 by Jari Kirma <kirma@cs.hut.fi>.
72 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
73 and pwrite only when we are certain it's safe (i.e., glibc 2.1
74 on all architectures or any libc on a i386 where we really know
75 how to use syscalls directly). In all other cases, emulate it
76 with lseek/read/write.
78 * pci.ids: Some more IDs.
80 Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
82 * pci.ids: Added IDs of parallel port controller cards as sent
83 by Tim Waugh <tim@cyberelk.demon.co.uk>.
85 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
87 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
89 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
92 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
93 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
94 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
95 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
98 * lspci.c (show_msi): Added dumping of the MSI capability.
99 (show_slotid): The same for SlotID capability.
100 (show_caps): Seperated capability dumping, because it should
101 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
102 layout of htype2, so I'm a bit unsure about it wrt capabilities
103 -- they at least have to live somewhere else since address 0x34
104 is already defined differently in htype2.
106 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
107 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
108 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
110 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
111 (required by the PCI 2.2 specs).
113 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
115 * lspci.c (show_size): Added new function for dumping of region sizes.
116 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
119 * lib/pci.h (struct pci_dev): known_fields moved to the public part
122 * Added support for region sizes. Needs support in the kernel, because
123 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
124 now returns a bitmask of what fields were really read.
126 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
129 Added `uninstall' target - removes all traces of pciutils.
131 - Lots of cleanups in the ATI, S3, Adaptec vendors.
132 - Changed Compaq QVision 1280/p definitions, as it's not possible
133 to determine the revision from the device ID.
134 - Same for the Tseng ET4000.
135 The id's said I had a rev C, when it was actually a rev B.
136 - Removed some unnecessary strings
137 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
138 `Ethernet card'. This should be determined from config space.
139 - Lots of other new vendors & devices
140 - Other additional small cleanups.
142 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
144 * lib/names.c (pci_lookup_name): When device ID lookup
145 fails, return hexadecimal device ID instead of vendor ID.
146 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
147 I've just extended the fix to subsystem ID's.
149 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
151 * lspci.c (show_agp): Bug fix from Petr Vandrovec
152 <vandrove@vc.cvut.cz>. The command register was displayed
155 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
157 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
158 numbers if not supplied by the libc.
160 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
162 * Released the whole package as version 2.0.
164 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
166 * pci.ids: Added several new ID's contributed by people
167 on the linux-pci list.
169 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
171 * lspci.c: Display I/O addresses correctly on sparc64.
172 * lib/header.h: Ditto.
174 * lib/configure: On sparc set HAVE_64BIT* as well, we want
175 a binary which works on both 32bit and 64bit SPARCs.
177 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
179 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
182 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
184 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
186 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
187 as a multi-function device, because several single-function devices
188 don't decode the function bits at all.
190 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
192 * Makefile (install): Don't use "-o root -g root" for installation
193 since it breaks on machines where programs are not installed by root.
194 Reported by Richard Gooch <rgooch@atnf.csiro.au>
196 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
198 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
200 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
201 or 64-bit depending on CPU.
203 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
204 according to bus address width.
206 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
208 * Released as 1.99.4.
210 * lspci.c: Capability list parser now recognizes both AGP
211 registers and PCI Power Management registers (the latter
212 is mainly guesswork based on DEC/Intel 21153 bridge specs
213 since I don't have the PCI Power Management document).
215 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
218 * lspci.c: Added bridge checks to bus mapping code.
220 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
222 * lspci.c: Implemented bus mapping mode (-M).
224 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
225 (show): Split to show() and show_device().
227 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
228 set it to the real access method afterwards.
230 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
232 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
233 don't check PCI_COMMAND for I/O and memory enables.
235 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
237 * Makefile: Added target `release' which substitutes new version
238 number to .spec, .lsm and README. Also rewrote target `dist'.
240 * Released as 1.99.3.
242 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
244 * lib/header.h: Until kernel adopts new layout of PCI
245 includes (i.e., separate declaration of header structure,
246 functions and device IDs), which is not going to happen
247 before 2.3, we'll use our own definiton of the header.
249 * lspci.c (show_verbose): Display `Cap' flag in device status.
251 * lspci.c (show_htype0): Display capability lists whereever
252 available. The only capability name we recognize now is `AGP'.
253 Unfortunately, capabilities are stored in device-dependent
254 portion of the configuration space and are thus available
255 only to root unless you read a dump.
257 * lspci.c (scan_devices): Use cache instead of buffering.
259 * lib/buffer.c: Removed (obsoleted by the cache).
261 * lib/access.c: Added general caching mechanism.
263 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
265 * pci.ids: Added few devices.
267 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
269 * Version string is now defined in top-level Makefile, exported
270 to the configure script and also substituted to man pages.
272 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
273 (show_verbose): Rewrote interrupt display logic.
275 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
277 * lib/configure: Rewrote detection of Linux versions. Now it
278 works on 2.0 kernels (only with direct/dump access, of course).
280 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
283 * lib/proc.c (proc_read, proc_write): Distinguish between short
284 read/write and real errors.
286 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
287 libpci respects buscentric mode automatically.
289 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
290 bytes of header (the whole standard part).
292 * common.c: pcilib options are now all uppercase. Also moved
293 PCI access debugging option here.
295 * Released as 1.99.2.
297 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
299 * Wrote configure script and rewrote Makefiles.
301 * Removed few unused variables.
303 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
305 * common.c: Moved several functions used in both setpci and lspci
306 here. This includes parsing of libpci-related options.
308 * More library tweaks.
310 * filter.c, names.c: Moved to library.
312 * setpci: Rewritten to use the library.
314 * Released as 1.99.1.
316 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
318 * lspci.c (scan_devices): For cardbus bridges, read first 128
319 bytes of config space to get full standard header.
321 * Makefile (CFLAGS): Removed "-Wno-unused".
323 * Started the "New Generation" branch and introduced the
326 * lspci: Rewritten to use the library.
328 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
330 * Released as version 1.10.
332 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
334 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
335 Dag Wieers <dag@digibel.be>.
337 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
339 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
341 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
343 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
345 * Released as version 1.09.
347 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
349 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
350 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
352 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
354 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
356 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
358 * Released as version 1.08.
360 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
362 * lspci.8: Changed warning about lspci -xxx.
364 * lspci.c: Require "-xxx" for full configuration space dump, so that
365 it's impossible to crash the machine by single typo.
367 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
369 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
371 * lspci.c (show_bases): Better displaying of unassigned and
372 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
375 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
377 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
378 (thanks to Geert Uytterhoeven for finding this out)
380 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
382 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
383 (show_machine): Print subsystem ID.
385 * names.c: New name resolution engine supporting subsystem IDs.
387 * Released as version 1.07.
389 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
391 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
392 (show_bases): Honor the `cnt' argument.
393 (grow_tree): Parse CardBus headers in tree mode as well.
395 * pci.h: Updated CardBus header field description. I still don't
396 have the CardBus standard available, but OZ6832 specs contain
397 full description of all header fields supported by the chip.
399 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
403 * names.c (parse_name_list): Killed an unused variable.
405 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
406 if they are not defined by glibc (needed for glibc built on older
409 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
411 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
415 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
416 should be gone. Again thanks to Steve for bug report.
418 * filter.c (filter_parse_slot): Fixed ":x" type filters.
420 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
421 <steve@icarus.com> for reporting this.
423 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
425 * lspci.c (main), setpci.c (main): Implemented "--version".
429 * pciutils.h (PCIUTILS_VERSION): Added version string.
431 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
432 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
435 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
437 * pci.ids: More updates from Jens Maurer.
439 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
441 * pci.ids: Updates from Jens Maurer.
443 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
449 * setpci.c: Finished.
451 * lspci.c: Now able to fetch expansion ROM base from kernel device list
452 and print it if not in buscentric mode.
454 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
458 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
460 * lspci.8: Updated the documentation.
462 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
464 * filter.c: Introduced new generic device filter.
466 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
468 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
469 of PCI-to-PCI bridges in the tree format.
471 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
473 * lspci.c (show_machine): Added non-verbose mode of machine-readable
476 * pci.ids: Updates from Jens Maurer.
478 * Released as version 1.02.
480 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
482 * lspci.c: Added a "-m" switch for dumping machine-readable
483 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
485 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
487 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
488 if available. This should avoid all problems with official kernel
489 not synchronized to newer PCI code in CVS -- standard distribution
490 of pciutils now contains pci.h from current CVS kernel, pciutils
491 in CVS contain no pci.h and use the correct kernel include.
493 * Makefile: Fixed installation path for man pages.
495 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
499 * lspci.8: Created a man page.
501 * Releasing as version 1.0.
503 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
505 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
506 to all the C sources. This should eliminate problems with 32-bit compilers
509 * lspci.c (show_verbose): Recognize CardBus bridge header type.
510 (show_htype2): Stub routine.
511 (scan_config): Write sensible error message if the kernel denies reading of
512 upper part of the PCI config space.