1 2020-05-31 Martin Mares <mj@ucw.cz>
5 * Added or improved the following capabilities: Designated Vendor-Specific,
6 Compute eXpress Link, Resizable BARs, VF Resizable BARs, Link
7 Capabilities 2, Link Status 2.
9 * On Linux, lspci can show IOMMU groups.
11 * setpci can be asked to skip bus scan and operate on a device
12 completely specified by its domain/bus/dev/func address. This
13 involved major internal cleanup.
15 * The above feature of setpci uses the pci_get_dev() function,
16 which obtains a struct pci_dev without doing a bus scan. This was
17 always possible, but apparently little used, because back-ends
18 frequently choked when operating on such devices. Fixed a lot
19 of minor bugs related to this.
21 * Also, back-ends which do not support domains now correctly fail when
22 trying to access devices outside domain 0.
24 * Semantics of pci_fill_info() and pci_dev->known_fields was underspecified,
25 which lead to inconsistencies between back-ends. Improved documentation
26 to give a more precise definition and updated all back-ends to conform
27 to it. Most importantly, pci_dev->known_fields shows all fields requested
28 over the lifetime of the pci_dev, but never those which are not supported
31 * As usually, updated pci.ids to the current snapshot of the database.
33 2020-01-25 Martin Mares <mj@ucw.cz>
37 * A new back-end for the GNU Hurd was contributed by Joan Lledó.
39 * When printing VPD item identifiers, non-ASCII characters are escaped.
41 2020-01-22 Martin Mares <mj@ucw.cz>
45 * `lspci -t' (tree mode) can be combined with `-s' to show a sub-tree.
46 We also fixed potential buffer overflows in the tree dumper.
48 * Cleaned messy code for dumping of I/O, memory, and ROM regions.
49 This helped fixing a bug, which caused some 64-bit regions to be
50 reported as virtual. All flags are now printed after the address
51 (previously, "[virtual]" and "[enhanced]" were before it for no good
54 * Added pci_find_cap_nr() to the library, which handles capabilities
55 which occur multiple times in a single device.
57 * Minor improvements in printing of PCIe capabilities.
59 * We now decode the Multicast and Secondary PCI Express extended
62 * The list of capability names available to setpci was updated.
64 * Minor bugs were fixed in FreeBSD and Solaris ports.
66 * We now prefer HTTPS URLs in all documentation
68 * The pci.ids file has a man page.
70 * As usually, updated pci.ids to the current snapshot of the database.
72 2018-08-12 Martin Mares <mj@ucw.cz>
76 * Added "-P" and "-PP" switches to lspci, which display the path
77 through bridges to each device.
79 * Fixed a couple of bugs in computation of bus topology. It was
80 previously used only for the tree display, but we re-use it for
83 * As usually, updated pci.ids to the current snapshot of the database.
85 2018-07-12 Martin Mares <mj@ucw.cz>
89 * Fixed compilation issues on Linux systems with MUSL libc.
91 2018-06-30 Martin Mares <mj@ucw.cz>
95 * BARs reported by the OS, but not set on the device itself are
96 reliably marked with "[virtual]".
98 * Library: Introduced a generic mechanism of string properties. This
99 avoids lots of special cases and makes ABI compatibility easier.
101 * On Linux systems with OpenFirmware, report corresponding device tree nodes
102 as device properties.
104 * VPD decoder knows several non-standard extensions.
106 * When PCIe link speed is less than the maximum supported by the
107 device, it is explicitly marked as "downgraded".
109 * Several new capabilities are not decoded yet, but at least their
112 * The Null capability is easily decoded.
114 * Formatting of several capabilities was cleaned up.
116 * The VGA16 bit in the bridge control register is now supported.
118 * Added a port to SylixOS. Thanks to YuJian Gong for contribution.
120 * Added a port to DOS/DJGPP. Thanks to Rudolf Marek for contribution.
122 * The order in which back-ends are probed was decoupled from the
123 internal back-end IDs. This helps, because new back-ends must have
124 their ID allocated at the end to keep the ABI, but they might need
125 to be probed earlier.
127 * The fbsd-device back-end should work again.
129 * Fixed a couple of bugs. Most notably, DeviceName was not printed.
131 * As usually, updated pci.ids to the current snapshot of the database.
133 2017-11-17 Martin Mares <mj@ucw.cz>
137 * Improvements of the FreeBSD back-end: read-only access for non-root,
138 support DragonFly BSD, support extended config space.
140 * MN VPD keyword is decoded correctly.
142 * As usually, updated pci.ids to the current snapshot of the database.
144 2017-07-05 Martin Mares <mj@ucw.cz>
148 * Better decoding of AER capability.
150 * "Slot Implemented" flag is decoded for PCI/PCI-X to PCIe bridges.
152 * Minor fixes of decoding other capabilities.
154 * As usually, updated pci.ids to the current snapshot of the database.
156 2017-02-25 Martin Mares <mj@ucw.cz>
160 * Previous version broke compilation on systems, for which lib/types.h
161 did not provide a 64-bit integer type. It is provided everywhere now.
163 2017-02-15 Martin Mares <mj@ucw.cz>
167 * When lspci looks for Linux kernel modules, it uses the default
168 path to module directory provided by libkmod. Previously,
169 it tried to construct the path explicitly, which need not
172 * Improved formatting of memory and I/O ranges behind a bridge.
174 * PCIe link capabilities now display GEN4 speed (16GT/s).
176 * PCIe device capabilities now show bits related to atomic operations.
177 Thanks to Satanand Burla for a patch.
179 * As usually, updated pci.ids to the current snapshot of the database.
181 2016-10-03 Martin Mares <mj@ucw.cz>
185 * The L1 power management capability is now decoded more
186 thoroughly. Thanks to Rajat Jain for the patch.
188 * The table of configuration registers used by setpci
189 had a bug in the definition of SUBSYSTEM_VENDOR_ID.
191 2016-05-22 Martin Mares <mj@ucw.cz>
195 * Fixed symbol versioning of pci_init().
197 2016-05-19 Martin Mares <mj@ucw.cz>
201 * New capabilities decoded: Downstream Port Containment,
202 Precision Time Measurement. Thanks to Keith Busch and
205 * Domain numbers extended to 31 bits. This will be used by the
206 Linux kernel on some machines in near future.
208 * Enhanced allocation regions are now decoded on Linux.
210 * The NetBSD back-end supports PCIe extended configuration space.
212 * Updated pci.ids to the current snapshot of the database.
214 2016-01-03 Martin Mares <mj@ucw.cz>
218 * New capabilities decoded: Process Address Space, Page Request
219 Interface, Enhanced Allocation. Thanks to David Daney and
222 * DevCap SlotPowerLimit is now decoded for all components with
225 * Database mirror at SourceForge moved to GitHub.
227 * Updated pci.ids to the current snapshot of the database.
229 2015-09-14 Martin Mares <mj@ucw.cz>
233 * On Linux, we report NUMA nodes of devices.
235 * The sysfs back-end does not die on read errors
236 of optional attributes. Instead, a warning is produced.
238 * Fixed several minor bugs.
240 * Updated pci.ids to the current snapshot of the database.
242 2015-04-09 Martin Mares <mj@ucw.cz>
246 * Removed hacks for backward compatibility with Linux libc5,
247 which were breaking newer non-glibc Linux systems. Thanks
250 * Display VirtIO vendor-specific capability. Patch by Gerd
253 * Fixed memory leak in name cache.
255 * Updated pci.ids to the current snapshot of the database.
257 2014-11-10 Martin Mares <mj@ucw.cz>
260 (celebrating a one-year anniversary of the previous version :))
262 * Device names exported by BIOS are displayed on Linux.
264 * On Linux systems, HWDB is used to look up device names
265 when our ID database gives no match. (More precisely,
266 HWDB is consulted after local pci.ids, but before using
267 network to query online pci.ids.) Thanks to Tom Gundersen
268 for the initial patch.
270 * Added experimental back-end for OS X / Darwin. Thanks to
271 Richard Yao for providing it.
273 * Filters now support matching by device class. Original
274 patch by Matthew Wilcox, wrappers for ABI compatibility
277 * Interrupt Pin and Interrupt Line registers are displayed
278 for bridge devices, too.
280 * Several portability bugs have been fixed.
282 * Several typos have been fixed. Also, use of questionable
283 constructs in man pages has been reduced.
285 * PCIe link capabilities now include the ASPMOptComp bit.
287 * The "CRS Software Visibility" bit is now decoded properly.
289 * Updated pci.ids to the current snapshot of the database.
291 2013-11-10 Martin Mares <mj@ucw.cz>
295 * CardBus bridge capabilities are displayed.
297 * PCIe L1 PM substates are decoded.
299 * Various bugs were fixed in decoding of PCIe capabilities.
301 * The sysfs back-end does not spit out unnecessary warnings when
302 empty slots report only a partial device address. This actually
303 happens on IBM pSeries.
305 * Updated pci.ids to the today's snapshot of the database.
307 2013-04-19 Martin Mares <mj@ucw.cz>
311 * On newer Linux systems, we use libkmod to look up kernel modules
312 (modules.pcimap no longer exists). To facilitate this, libpci
313 is able to look up module aliases in sysfs.
315 * Various minor bug fixes.
317 * Updated pci.ids to the today's snapshot of the database.
319 2012-06-25 Martin Mares <mj@ucw.cz>
321 * Released as 3.1.10.
323 * Decoding of LTR/OBFF in PCIe capabilities.
325 * Various minor bug fixes.
327 * Updated pci.ids to the today's snapshot of the database.
329 2012-01-14 Martin Mares <mj@ucw.cz>
335 * Wherever we mention the PCI ID database, we now refer to
336 http://pci-ids.ucw.cz/ and the sf.net site is mentioned only
337 as a mirror. This includes update-pciids.
339 * Decode PCIe Gen 3 speeds and link status fields.
341 * Various minor bug fixes.
343 * Updated pci.ids to the today's snapshot of the database.
345 2011-10-02 Martin Mares <mj@ucw.cz>
349 * More capabilities: Transaction Processing Hints, Latency Tolerance
350 Reporting. Thanks to Jesse Barnes.
352 * Added BeOS and Haiku ports. Contributed by Francois Revol.
354 * pciutils.pc now uses Libs.private properly.
356 * When we format a name and it does not fit in the buffer, we truncate
357 it instead of returning "buffer too small" instead. This works on all
358 platforms with sane (i.e., C99-compatible) snprintf().
360 * Various minor bug fixes.
362 * Updated pci.ids to the today's snapshot of the database.
364 2010-01-31 Martin Mares <mj@ucw.cz>
368 * Minor improvements and bug fixes in decoding of the Virtual Channel
371 2010-01-24 Martin Mares <mj@ucw.cz>
375 * More capabilities decoded: Virtual Channel (except arbitration
376 tables), Root Complex Link, Vendor-Specific (header only), SATA HBA.
378 * All extended capabilities have their version displayed (-vv or more).
380 2010-01-19 Martin Mares <mj@ucw.cz>
384 * Updated pci.ids to the today's snapshot of the database.
386 * When scanning extended capabilities, properly mask the lowest 2 bits,
387 which are currently reserved. This avoids unaligned access errors on
388 broken hardware (see tests/broken-ecaps).
390 * Large bar sizes are displayed in human-readable format (with units).
391 Thanks to Matthew Wilcox.
393 * Physical slot information is displayed correctly for multi-function cards.
394 Fixed by Matthew Wilcox.
396 * Fixed a couple of typos everywhere.
398 * Library: Fixed bugs in freeing of capabilities.
400 * Windows back-end compiles again.
402 2009-08-14 Martin Mares <mj@ucw.cz>
405 (sorry that I have missed 22/7 and released it later :-))
407 * Updated pci.ids to the today's snapshot of the database.
409 * Fixed memory and file descriptor leak in the dump back-end.
411 * The SR-IOV capability decoder now prints the VF BAR's.
412 Patch by Chris Wright, cleaned up by me.
414 * On request of certain company's lawyers, we now include a copy
415 of the GPL with our package. It seems that the pciutils are getting
416 mature if the most important bug of the month was this one ;-)
418 2009-07-04 Martin Mares <mj@ucw.cz>
422 * Updated pci.ids to the current snapshot of the database.
424 * The VPD parser now reports unknown and vendor-defined items
425 properly. It also stops on any item in unknown format, avoiding long
426 output on bogus VPD data. Thanks to Ben Hutchings and Matthew Wilcox.
428 * The MSI-X table size now matches the spec. Thanks to Michael S.
431 * The Power Management capability now includes the soft reset bit.
434 * Decoding of the Advanced Features capability has been added.
437 * The whole package compiles on GNU/kFreeBSD again.
439 The following patches have been contributed by Matthew Wilcox:
441 * The procfs back-end is able to cope with /proc/bus/pci
442 containing names with domains, which occur on sparc64 and
443 possibly other architectures due to a kernel bug.
445 * The sysfs back-end no longer complains when a slot address
446 is missing, which happens with old versions of Linux fakephp.
448 * The Device Serial Number capability is printed in the right
451 * The MSI and MSI-X capabilities are printed in a prettier way.
453 * The tree output mode (`lspci -t') shows domain numbers only
454 at the root, which makes the output more compact.
456 * Updated documentation on the bus mapping mode (`lspci -M').
458 2009-02-01 Martin Mares <mj@ucw.cz>
462 * Fixed another silly bug in the command-line parser of setpci.
464 2009-01-30 Martin Mares <mj@ucw.cz>
468 * Updated pci.ids to the current snapshot of the database.
470 * The configure script now sets LC_ALL to avoid being fooled by
471 locale-dependent behavior of `tr'.
473 * The command-line parser of setpci did sometimes segfault on invalid
474 input. Thanks to Andreas Wiese for a fix.
476 2009-01-18 Martin Mares <mj@ucw.cz>
480 * Updated pci.ids to the current snapshot of the database.
482 * The Cygwin backend now works on Windows Vista. Thanks to Jonathan
485 * Fixed a bug in decoding of the SR-IOV capability. Patch by Yu Zhao.
487 * Details of some PCIe capabilities are displayed only with -vv.
489 * When a BAR is reported by the OS, but not by the device (i.e.,
490 it is marked as [virtual] in lspci), the [disabled] flag is
491 suppressed, because it does not make sense in such cases.
494 2008-12-13 Martin Mares <mj@ucw.cz>
496 * The source code of lspci has been split to multiple files, hopefully
497 making it easier to maintain.
499 * The library and lspci now know about physical slot names. So far,
500 they are provided by the sysfs back-end only. Thanks go to Alex Chiang.
502 * When a device has the VPD (Vital Product Data) capability and the
503 VPD data are supplied by the OS, they are decoded and printed in the
504 verbose mode. This currently works only on Linux with the sysfs
505 back-end. Thanks to Ben Hutchings of Solarflare for the patch.
507 * `setpci --version' now works properly.
509 * `setpci --dumpregs' prints a table of all known names of
510 registers and capabilities. This replaces the table of registers
511 in the setpci man page.
513 * The dry-run mode of setpci gives better feedback.
515 * The setpci utility is now able to address registers stored in PCI
516 capabilities (actually it allows a more general form of relative
519 * The library has gained functions for working with PCI capabilities.
521 * Address Translation Services capability is now decoded. Patch by
524 2008-11-09 Martin Mares <mj@ucw.cz>
528 * `lspci -k' now displays the subsystem ID, too. This makes `-k'
529 show everything needed to identify the device and the available
530 drivers, which was called for by many users.
532 * Fixed spelling of MSI. Patch by Matthew Wilcox.
534 * Better support for cross-compilation. Thanks to Alon Bar-Lev
537 * Fixed printing of the AER capability. Patch by Max Asbock.
539 * HT 1.02 capabilities are decoded as HT 1.03. Suggested by
540 Carl-Daniel Hailfinger.
542 * Fixed Cygwin build. Thanks to Steve Elliott for reporting the bug.
544 * Updated pci.ids to the current snapshot of the database.
546 2008-09-19 Martin Mares <mj@ucw.cz>
550 * Fixed a minor bug in the configure script, which caused warnings
551 about redefinition of symbols during compilation.
553 2008-09-11 Martin Mares <mj@ucw.cz>
557 * Updated pci.ids to the most recent snapshot.
559 * Added a Cygwin port. Patch by Christopher Voltz, ported to the
560 current tree by Martin Mares.
562 * Worked around compatibility problems with various default settings
563 of wget (we have to set --no-timestamping explicitly). Thanks to Ville
564 Skytta for pointing that out.
566 * Fixed printing of MSI capabilities. Thanks to Matthew Wilcox for
569 * Added decoding of several PCI-X capabilities: device/link/slot 2,
570 Advanced Error Reporting, Access Control Services, Alternative Routing-ID,
571 Single Root I/O Virtualization. Thanks to Yu Zhao for patches.
573 * Fixed bug in filters which caused them to refuse vendor/device ID 0xffff.
575 * README: The linux-pci mailing list has moved to linux-pci@vger.kernel.org.
577 * Fixed several build problems: builds without PCI_USE_DNS on Linux
578 and with PCI_USE_DNS on Solaris and *BSD. Static library mode also
579 compiles again on old versions of GCC.
581 2008-04-10 Martin Mares <mj@ucw.cz>
585 * Updated API and ABI version.
587 2008-02-20 Martin Mares <mj@ucw.cz>
589 * Released as 2.99.1-alpha2.
591 * Changed the default domain for the DNS resolver.
593 2008-02-18 Martin Mares <mj@ucw.cz>
595 * Released as 2.99.1-alpha1.
597 * The makefile system has been reworked. All configuration settings
598 are now passed to the configure script in environment variables,
599 allowing for easy tweaking in the top-level Makefile. All control
600 knobs are now described in the README.
602 * The libpci can be built as a shared library with properly restricted
603 symbol exports. Use `make SHARED=yes' to enable that or `make SHARED=local'
604 for a local testing build (with hardwired paths to the library, so that
605 it does not need installation).
607 * The example program has been moved from lib/example.c to the top-level
608 directory, because it should be built exactly as the other utilities
609 are. It has been also improved slightly to educate better.
611 * The i386-ports method is enabled on Linux/x86_64 as well.
613 2008-02-13 Martin Mares <mj@ucw.cz>
615 * Released as 2.2.10-net2.
617 * Support for resolving of PCI ID's using DNS together with a local
618 cache of resolved entries has been added. See the `-q' and `-Q' options
621 * The library now has a generic system of settable parameters, which
622 also include settings of the DNS resolver and cache. An `-O' option
623 has been added to lspci and setpci to allow setting of these options.
625 * Configuration of the access methods are now specified by the new
626 parameter system, replacing the pci_access->method_params array.
628 * Access methods now also have sensible names and help texts and it
629 is possible to look up method ID by a name.
631 * An `-A' switch has been added to both lspci and setpci, allowing to
632 select an arbitrary access method. The `-P' switch (configure proc
633 backend) has been removed as it is no longer needed and I do not know
636 * Several source files have been split for better maintainability
637 (most notably the resolving of ID's).
639 * Man pages and help texts have been updated. A new man page `pcilib(7)'
640 has been added and description of library options has been moved there.
642 * When an unknown device ID is encountered, we print `Device <id>'
643 instead of `Unknown device <id>'. It uses less space and it also
644 should reduce the number of inexperienced users complaining that
645 the device is not supported by the OS. To lookup up OS drivers,
648 * PCI_LIB_VERSION has been bumped to 0x020299.
650 * Makefile: stripping of the binaries during installation can be
651 overridden by the STRIP variable.
653 * lib/types.h: We use the integer types from <stdint.h> if the
654 compiler claims C99 support.
656 2008-02-11 Martin Mares <mj@ucw.cz>
658 * Released as 2.2.10.
660 * lspci.c, setpci.c: Cleaned up the list of options.
662 * lib/names.c: Fix displaying of errors reported by zlib.
663 Previously, the buffer containing the error message had
664 been deallocated by gzclose() before the message was printed.
666 2008-01-07 Martin Mares <mj@ucw.cz>
668 * update-pciids.sh: Added quiet mode (-q). Clean up uncompressed
669 files left by previous versions of the pciutils. Patch by Mike
672 * update-pciids.man: Mention the -q switch.
674 2007-11-29 Martin Mares <mj@ucw.cz>
676 * lib/dump.c: Squashed compiler warnings about code with
677 no effect (there really were surplus *'s).
679 2007-11-06 Martin Mares <mj@ucw.cz>
683 * lspci.c: Added a new switch `-k' which requests printing
684 of information on kernel drivers attached to each device
685 and on kernel modules reporting the ability to handle the
686 device. So far, this is supported only on Linux with the
687 sysfs back-end, so it is implemented internally in the lspci
688 instead of the libpci. Thanks to Anicka <anicka@anicka.net>
691 2007-10-19 Martin Mares <mj@ucw.cz>
693 * Makefile, lib/Makefile: Moved -lz from LDFLAGS to LDLIBS.
694 Also added an explicit pattern rule for linking to make sure
695 that LDLIBS is used on all platforms. Thanks to Dan Nicholson
698 2007-10-19 Martin Mares <mj@ucw.cz>
702 * pci.ids: Revised class codes to match Conventional PCI 3.0 specs.
703 Added a couple of new ones, renumbered `ADMA continuous operation'
704 prog-if to 0x30 (even the old SATA Class Code ECN doesn't mention
705 0x40) and renumbered the satellite communication controllers.
707 * lib/header.h: Include `PCI hot-plug' and `Secure device'
708 capabilities from PCI 3.0 specs. Also added `SATA HBA' and
709 `Advanced features' caps from various ECN's.
711 * lspci.c: All known capabilities have at least their name displayed
712 now. When we are unable to decode them completely, we signalize it
715 * lspci.man: Document `<?>' and also mention that extended config
716 space is currently available only with the linux_sysfs back-end.
718 * lspci.c: Decode the Debug port capability (per EHCI 0.96 spec).
720 * lspci.c: Big code cleanup: re-arranged functions in the code,
721 renamed everything related to capabilities to cap_* and
722 all options except verbose to opt_*.
724 2007-10-14 Martin Mares <mj@ucw.cz>
726 * lib/[fno]bsd-*: Removed extraneous braces.
728 2007-10-12 Martin Mares <mj@ucw.cz>
730 * Capability loop detection introduced 2.2.7 did not work
731 properly with extended capabilities. Fixed.
733 2007-10-05 Martin Mares <mj@ucw.cz>
737 * lspci.c (show_caps, show_ext_caps): Detect and report loops in
740 * lspci.c, lib/header.h: Finished decoding of the PCI Express
741 capability. The extended capabilities remain undecoded for now,
742 but at least the list of them has been updated to reflect the
743 current PCI Express 2.0 spec.
745 * lspci.c, lib/header.h: Decode new bits of traditional registers
746 as defined by PCIE / PCI-X. This includes discard timers in the bridge
747 control register and INTx enable/status in device control/status
750 * lib/fbsd-device.c: Support domains on new FreeBSD's. Contributed
753 2007-09-12 Hasso Tepper <hasso@estpak.ee>
755 * Extended the fbsd-device backend to run on Dragonfly BSD.
757 * lspci.c: alloca() is declared in <stdlib.h> on BSD's, not <alloca.h>.
759 2007-09-03 Martin Mares <mj@ucw.cz>
761 * Resurrected the Windows port, including cross-compilation by MinGW.
762 Patch by Samuel Bronson <naesten@gmail.com>.
764 2007-08-31 Martin Mares <mj@ucw.cz>
766 * Makefile, lib/Makefile: `ar' and `ranlib' can be overridden to allow
769 2007-08-27 Martin Mares <mj@ucw.cz>
771 * lib/names.c (pci_open): When calling gzopen(), use "rb" file mode
772 instead of "r". This is needed on DOS systems, where this function
773 somewhat illogically uses the binary flag for the compressed file
774 instead of the decompressed stream inside, where binariness really
777 2007-08-14 Martin Mares <mj@ucw.cz>
779 * lspci.c (show_ht): Added decoding of Hypertransport MSI mapping capability,
780 based on a patch by Jason Gunthorpe.
782 * tests/cap-MSI-mapping: Added a test case. I plan to add test cases
783 (which are dumps of config space) for all new features.
785 2007-06-20 Martin Mares <mj@ucw.cz>
789 * Makefile: Added an "install-lib" target. Thanks to Dan Nicholson
792 * Makefile, lib/Makefile: Generate and install pkg-config file
793 for libpci. Again by Dan Nicholson.
795 2007-06-20 Thomas Schwinge <tschwinge@gnu.org>
797 * lib/i386-io-hurd.h: Rewritten for new Hurd kernels.
799 2007-05-04 Martin Mares <mj@ucw.cz>
803 * pci.ids: Updated to the current snapshot of the database.
805 2007-02-14 Martin Mares <mj@ucw.cz>
807 * lspci.c (show_express): Added PCI/PCI-X to PCI-Express Bridge type.
808 Patch by Mark Glines.
810 2007-02-09 Martin Mares <mj@ucw.cz>
812 * pci.ids: Updated to the current snapshot of the database.
814 2007-02-06 Martin Mares <mj@ucw.cz>
816 * Replaced bzero() by memset() everywhere, it's better to lose a tiny
817 bit of readability than maintain hacks to make it work on various systems.
819 * lib/configure: tr on Solaris is a bit weird and it requires `[A-Z]'
820 instead of `A-Z'. Fortunately, the extra brackets don't hurt otherwise.
822 * lib/types.h, lib/configure: Solaris should use <stdint.h> to get precise
825 2007-02-04 Martin Mares <mj@ucw.cz>
827 * lspci.c: alloca() needs <alloca.h>.
829 2006-09-17 Martin Mares <mj@ucw.cz>
831 * lib/dump.c: Fixed a couple of bugs in the dump backend which caused
832 devices with domains or with extended config space to be read incorrectly.
833 Also, dumps with partial lines are allowed now.
835 2006-09-10 Martin Mares <mj@ucw.cz>
837 * pci.ids: Updated to the current database snapshot.
839 * lspci.c (scan_device): If an error occurs when reading the standard config
840 header of a device, report it and ignore the device and return with exit
843 2006-09-09 Martin Mares <mj@ucw.cz>
847 * maint/release: Remind the maintainer about the current PCI_LIB_VERSION.
849 * lib/pci.h: Updated PCI_LIB_VERSION.
851 * lspci.c (show_machine): In the `-m' mode, do proper shell escaping
852 if the fields printed contain quotes or backslashes.
854 * lspci.c (show_machine): Added a `-vmm' mode, which removes the misuse
855 of the `Device' tag for two different purposes.
857 * Makefile: Moved all system-dependent decisions to lib/configure,
858 since config.mk is included in the top-level Makefile anyway.
860 * lib/configure: When configuring for Linux, ignore the kernel version
861 and always build all access methods.
863 * Makefile (CFLAGS): Removed -Winline, it's not needed and triggers
864 at many non-interesting places with gcc 3.4.
866 * Whitespace cleanup of all source files.
868 * The pci.ids file can be stored compressed if zlib is available.
869 Added transparent decompression to lib/names.c, modified update-pciids.sh
870 to keep the file compressed if applicable, updated Makefiles.
871 Based on a patch by Matthew Wilcox, but all the bugs are mine.
873 * Makefile, README: Allow installation to be done to a different directory
874 from the one we will eventually be placed in by setting DESTDIR.
875 Patch by Matthew Wilcox.
877 * Added .gitignore files.
879 * Makefile (clean): Clean *.orig, too.
881 * Cleaned up usage of `char' and `byte'.
883 * lib/header.h: PCI_CLASS_DOCKING_OTHER should be 0x0a80, not 0x0a01.
885 * lib/header.h: Added PCI_CLASS_xxx constants for all classes currently
886 defined in the pci.ids file.
888 2006-08-01 Martin Mares <mj@ucw.cz>
890 * lib/i386-io-hurd.h: Fixed a silly typo.
892 2006-07-30 Martin Mares <mj@ucw.cz>
894 * lib/Makefile: Added a missing rule for obsd-device.o.
896 * lspci.c, lib/header.h: Added support for MSI per-vector masking.
897 Contributed by Petr Vandrovec.
899 * lspci.c, lib/header.h: Added support for the `bridge subsystem ID'
900 capability. Contributed by Petr Vandrovec.
902 * lspci.c (show_htype1): Fixed bug in printing of 64-bit prefetchable
903 memory windows. Fix by Petr Vandrovec.
905 * maint/release.pm: Exclude .git directory from releases.
907 * lib/i386-ports.c, lib/i386-io-*: Report failures during port access
908 initialization by a->warn() instead of calling printf() or perror()
911 * lib/i386-ports.c, lib/i386-io-*: Moved the logic which keeps track of
912 the port access state to generic code.
914 * lib/i386-io-hurd.h: Ask the kernel for I/O port access appropriately.
915 Contributed by Thomas Schwinge and Samuel Thibault.
917 * lib/i386-ports.c: Define _GNU_SOURCE, it's needed by the Hurd module.
919 * lib/header.h: Whitespace cleanups.
921 * lib/i386-io-windows.h: Fixed indentation and spelling.
923 * README.Windows: Mention that WinIO.dll is needed and where to get it.
925 2006-06-27 Martin Mares <mj@ucw.cz>
927 * lib/Makefile, Makefile: Added rules for building and cleaning the example.
929 * lib/example.c: Show how to use PCI_FILL_CLASS and used another register
930 for demonstrating the config space accesses. The example is still very
933 * lib/pci.h, lib/generic.c: Added PCI_FILL_CLASS.
935 * lib/sysfs.c: Fetch device ID and class from sysfs, because they can
936 be modified by kernel fixups.
938 * lspci.c: Use PCI_FILL_CLASS. Thanks to Matthew Willcox for the patch.
940 2006-06-03 Martin Mares <mj@ucw.cz>
942 * lspci.c: Introduced the -nn switch. Thanks to David N. Welton
945 * lib/names.c (pci_lookup_name): Introduced PCI_LOOKUP_MIXED and
946 cleaned up the name selection code.
948 * lib/names.c (pci_lookup_name): If PCI_LOOKUP_NO_NUMBERS is given,
949 pci_access->numeric_ids is ignored.
951 * lib/names.c (pci_lookup_name): When class is identified and
952 subclass isn't, display class name and subclass number.
954 2006-05-31 Martin Mares <mj@ucw.cz>
956 * setpci.c (main): Don't crash when an invalid width is specified.
958 * lspci.c, setpci.c, common.c: die() now uses the right program
959 name when printing an error message.
961 2006-05-19 Martin Mares <mj@ucw.cz>
963 * README: Mention the public GIT tree.
965 * README: Updated the list of ports.
967 2006-05-10 Martin Mares <mj@ucw.cz>
969 * lib/configure, lib/fbsd-device.c: Added support for GNU/kFreeBSD.
970 Thanks to Petr Salinger for the patch.
972 2006-05-05 Martin Mares <mj@ucw.cz>
976 * lspci.c (scan_device): The -D switch didn't work as intended
979 2006-05-05 Martin Mares <mj@ucw.cz>
983 * pci.ids: Updated to the current database snapshot.
985 * lib/obsd-device.c (and other files in lib/*): Added OpenBSD
986 interface by Matthieu Herrb <matthieu.herrb@laas.fr>, based on
987 the existing FreeBSD interface.
989 * Moved pciutils to a GIT repository, which now contains merged
990 history from both CVS and Arch. Good bye, TLA!
992 2006-03-21 Martin Mares <mj@ucw.cz>
994 * lspci.c (show_slot_name): Avoid the previous changes in default
995 display of domain name when in machine-readable mode. However, `-D'
996 forces domain display even there.
998 * lspci.man: Added a warning on -m being the only format, which is
999 guaranteed to be stable between lspci versions.
1001 2006-03-13 Martin Mares <mj@ucw.cz>
1003 * lspci.man: Documented the -D switch.
1005 * lspci.c (show_slot_name, scan_device): If there are multiple PCI
1006 domains or if the `-D' switch is used, show the domain number for
1009 * lspci.c (show_verbose): Report cache line size in bytes.
1011 * update-pciids.sh: Use curl if available. Patch by Matthew Wilcox.
1013 2006-01-04 Martin Mares <mj@ucw.cz>
1015 * lspci.c (show_express_link): Fixed decoding of link status register.
1016 Thanks to Roland Dreier for his report.
1018 2005-12-12 Martin Mares <mj@ucw.cz>
1020 * lib/nbsd-libpci.c: If libpci is used by an ordinary user, allow
1021 at least read-only access. Patch by Pavel Celeda <celeda@liberouter.org>.
1023 * Makefile: Corrected library path on NetBSD.
1025 2005-11-26 Martin Mares <mj@ucw.cz>
1027 * Released as 2.2.1.
1029 * lspci.c (show_machine): Subsystem vendors were printed incorrectly
1030 in machine-readable modes. Thanks to Pavel Celeda for a bug report.
1032 2005-10-11 Martin Mares <mj@ucw.cz>
1034 * lspci.c (new_bus): Fixed a memory leak. Thanks to Paul Sangree for reporting it.
1036 2005-09-21 Martin Mares <mj@ucw.cz>
1038 * Released as 2.2.0.
1040 * pci.ids: Updated copyright header.
1042 * lib/sysfs.c (sysfs_get_resources): Removed warning about unsupported
1043 64-bit addresses, they are now always supported.
1045 * lspci.c (show_bases): Corrected printing of 64-bit addresses
1046 in bus-centric mode.
1048 * lib/configure: Enable 64-bit addresses on all Linux systems.
1050 * lib/types.h: Don't pad 64-bit addresses to 16 xigits, only to 8 if they
1053 2005-09-11 Martin Mares <mj@ucw.cz>
1055 * Released as 2.1.99-test11.
1057 * lspci.c: Removed unnecessary trailing zeros in pci_lookup_name() calls.
1059 2005-09-10 Martin Mares <mj@ucw.cz>
1061 * Released as 2.1.99-test10.
1063 * pci.ids: Synchronized with the current database snapshot.
1065 * update-pciids.sh: Changed the default URL for downloading pci.ids
1066 to http://pciids.sourceforge.net/v2.2/pci.ids.
1068 * lib/pci.h (PCI_LIB_VERSION): Added version identifier.
1070 * lib/names.c: Rewritten the name database module almost from scratch.
1071 Everything is much cleaner and there are hopefully no more memory leaks;
1072 pci_lookup_name() now uses varargs in a backward compatible fashion.
1073 Introduced PCI_LOOKUP_NO_NUMBERS.
1075 The new code supports subsystem entries not tied to a specific device.
1076 I had to extend the format of pci.ids in order to support it, so I have
1077 extended the idea of the "C" (class) blocks and introduced "S" blocks
1078 for subsystems. To avoid doing more incompatible changes in the future,
1079 the parser skips unknown single-letter blocks without reporting errors.
1081 2005-08-23 Martin Mares <mj@ucw.cz>
1083 * Released as 2.1.99-test9.
1085 * Makefile (OPT): Removed -fomit-frame-pointer, it's default in recent
1086 gcc versions when optimizing anyway.
1088 * Made the path to pci.ids customizable and independent on the SHAREDIR.
1089 Just override IDSDIR in the top-level Makefile.
1091 * pci.ids: Synchronized with the current database snapshot.
1093 * lspci.man, setpci.man: Improved the man pages. Documented all access
1094 methods and which operations are privileged.
1096 * lspci.c: Another rewrite of config register caching, now also including
1097 lots of internal checks. It should be now perfectly able to cope with
1098 portions of the configuration space being inaccessible, for example
1099 due to insufficient access rights.
1101 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Cleaned up dumping of PCI-X
1102 capabilities. Includes partial support for PCI-X 2.0 (probably incomplete
1103 as I haven't seen the spec).
1105 * lspci.c: Quell warnings about unused parameters.
1107 * lspci.c: Removed C++ comments.
1109 * lib/header.h: Merged definitions of extended capabilities and some new
1110 PCI-X capability bits from linux-2.6.11/include/pci.h.
1112 * lspci.c (show_caps): Try to scan extended capabilities only if the
1113 device has either PCI-X or PCI Express capability in its normal capability
1116 * lib/dump.c (dump_init): Reading of dumps works again. The dump reader
1117 now also remembers how much data it has read and refuses attempts to
1118 access more than that.
1120 * setpci.man, lspci.c, README: prefer spelling "buses" over "busses".
1122 * lspci.c: If alloca() is not available, use xmalloc(), not malloc().
1124 * lib/configure: Added x86_64 on Linux.
1126 2005-08-22 Martin Mares <mj@ucw.cz>
1128 * lib/filter.c (pci_filter_parse_slot): Fixed parsing of domain filters.
1129 Thanks to Matthew Wilcox for bug report.
1131 * lspci.c: Corrected spelling of "Hz" (it was "hz" at several places).
1132 Thanks to Krzysztof Oledzki for pointing that out.
1134 2004-08-19 Martin Mares <mj@ucw.cz>
1136 * pciutils.spec (%attr): Setting attributes for /sbin/* is an anachronism,
1137 because pciutils by default install to /usr/sbin. Update.
1139 2004-08-13 Martin Mares <mj@ucw.cz>
1141 * Released as 2.1.99-test8.
1143 * lib/types.h, lib/pci.h, lib/sysdep.h: `byte' and `word' are
1144 no longer exported to the outside world.
1146 * README.Windows: Updated.
1148 * maint/release: Substitute version number in win32/config.h.
1150 * win32/config.h: Added.
1152 * lib/sysdep.h (bzero, strcasecmp): are macros on Windows.
1154 * compat/getopt.[ch]: Added copies of getopt.[ch] from the GNU
1155 C library for use on systems where the default libraries lack
1156 proper getopt. Currently used by the Windows port.
1158 * lib/sysdep.h, lib/types.h: Updates of the Windows port from
1161 * lib/types.h: If PCI_HAVE_Uxx_TYPES is defined, libpci doesn't define
1162 its own u8, u16, u32, byte and word types and uses what the user
1163 has supplied instead. With this change, all namespace clashes should
1166 * Makefile, lib/Makefile: Updated dependencies.
1168 * pciutils.h: Include lib/sysdep.h and move NONRET et al. there.
1170 * lib/sysdep.h: No need to include <sys/types.h> on FreeBSD, because
1171 it is included unconditionally in lib/types.h.
1173 * Moved system-dependent stuff from lib/internal.h to lib/sysdep.h,
1174 which is also used by the utilities. Also moved type declarations
1175 from lib/pci.h to lib/types.h.
1177 * All files: Prepend a "PCI_" prefix in front of all configuration
1178 defines to avoid namespace clashes. CAVEAT: If there is any libpci
1179 application using the (undocumented) defines, it has to be updated.
1181 * lib/Makefile: Killed HAVE_OWN_HEADER_H, since we stopped sharing
1182 headers with the kernel a couple of years ago.
1184 * lib/sysfs.c (sysfs_get_resources): We have 7 resources, not 6.
1186 * lspci.c (show_rom): Use the same logic for printing disabled
1187 or unassigned ROM's as we do in show_bases() for the other BAR's.
1189 * lib/generic.c (pci_generic_fill_info): Better reaction to
1190 invalid 64-bit addresses. Also d->hdrtype should not include
1191 bit 7, which caused mysterious errors on multi-function devices.
1193 * lib/generic.c (pci_generic_fill_info): Fill in base addresses
1194 even if the regions are known to be disabled. It is the client's
1195 job to interpret them. (And it is not a trivial job if you want
1196 to do it correctly, since you need to check I/O and memory enables
1197 on all upstream bridges, too.) However, it could be interesting to
1198 introduce functions for interpreting the addresses and even for
1199 mapping the regions and doing I/O on them.
1201 2004-07-30 Martin Mares <mj@ucw.cz>
1203 * lspci.c: HyperTransport improvements from Maciej.
1205 2004-07-11 Martin Mares <mj@ucw.cz>
1207 * lib/sysfs.c (sysfs_get_resources): Arguments now correspond
1208 to the format string. [Patch by Bill Nottingham]
1210 2004-07-05 Martin Mares <mj@ucw.cz>
1212 * Released as 2.1.99-test7.
1214 * lspci.c (config_fetch): Wanted to merge Matthew's bug fix, but
1215 ended up with rewriting the fetching mechanism to be fully dynamic,
1216 but avoid reading config space registers not explicitly requested.
1218 2004-06-29 Matthew Wilcox <willy@debian.org>
1220 * lspci.c: More work on PCI Express dumping.
1222 * lib/header.h: Updated PCI Express capability definitions.
1224 * lib/proc.c (proc_read): Removed bogus warning.
1226 * common.c (xrealloc): Introduced.
1228 * lspci.man: Added -xxxx.
1230 2004-06-27 Martin Mares <mj@ucw.cz>
1232 * Released as 2.1.99-test6.
1234 * lspci.c (show_msix), lib/header.h: Added dumping of MSI-X cap.
1235 Patch by Roland Dreier <roland@topspin.com>, cleaned up by me.
1237 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Handle config_fetch()
1240 * lib/header.h: Added PCI Express extended capabilities. Again by Matthew.
1242 * lspci.c (show_express): Added dumping of PCI Express cap.
1243 Patch by Matthew Wilcox.
1245 * lib/header.h: Added a list of PCI 3.0 capabilities and also details
1246 on PCI Express caps. Patch by Matthew Wilcox <willy@debian.org>.
1248 * lspci.c (check_root): Gone. No explicit checks for root are needed,
1249 report correct errors reported by the libpci instead.
1251 * lspci.c: Added dumping of the extended config space on "-xxxx".
1252 Better caching of config registers.
1254 * setpci.c (main): Allow access to whole 4096 bytes of the config space.
1256 * lib/sysfs.c, lib/proc.c: Don't print error messages on short reads,
1257 just return the appropriate error code.
1259 * lib: Added support for extended (4096-byte) configuration space,
1260 currently implemented only in Linux proc and sysfs access methods
1261 and of course in the dump reader.
1263 2004-05-29 Martin Mares <mj@ucw.cz>
1265 * Released as 2.1.99-test5.
1267 * lib/pci.h: Windows don't have the standard u_int* types.
1269 * lib/internal.h: <sys/param.h> required on Windows for endianity
1272 * lib/i386-ports.c: Connected i386-io-windows.h.
1274 * lspci.c (check_root): geteuid() is not available on Windows.
1276 * lib/i386-io-windows.h: Added Windows port contributed by Alexander
1277 Stock <stock.alexander@gmx.de>.
1279 * lib/configure: Hopefully fixed SunOS port broken by various
1280 changes to the configure script.
1282 * Makefile, lib/configure: Cross-compilation support, patch by Maciej.
1284 2004-05-28 Martin Mares <mj@ucw.cz>
1286 * Released as 2.1.99-test4.
1288 * lspci.c (show_verbose): Header type 1 is probably legal for all
1289 types of bridges, not only for PCI-to-PCI bridges.
1291 * lspci.c (format_agp_rate): Write "x16", not "x@".
1292 (show_agp): rate[] could overflow.
1293 Bugs reported by Jakub Bogusz <qboosh@pld-linux.org>.
1295 * lspci.c (show_ht_*): Show HyperTransport capability with all its
1296 details. Once again code by Maciej simplified (i.e., possibly broken)
1299 * lib/header.h: Added declarations of HyperTransport capability.
1300 Again thanks to Maciej.
1302 * lspci.c: Decode all bits of the secondary status word in type 1 headers.
1303 Thanks to Maciej W. Rozycki <macro@ds2.pg.gda.pl> for the patch.
1305 2003-12-27 Martin Mares <mj@ucw.cz>
1307 * Released as 2.1.99-test3.
1309 * lspci.man, setpci.man: Document domains and correct spelling.
1311 * lib/dump.c (dump_init): Added ability to read domain numbers.
1313 * lspci.c: Devices in domains different from 0 have their slot number
1314 printed as "<domain>:<bus>:<slot>.<func>". Tree view supports domains
1317 * lib/filter.c: Slot filters understand domains.
1319 * lib/generic.c: Mention the domain in slot numbers in all error messages.
1321 * lib/internal.h: The #ifdef for Linux <asm/byteorder.h> was wrong.
1323 * lib/access.c (pci_get_dev): Added support for domains.
1325 * lib/sysfs.c (sysfs_scan): Read vendor and device ID from the config
1326 registers (or to be precise, leave it for the generic parts of the pcilib
1327 to do so) instead of reading them from the sysfs. It's faster this way.
1329 * lspci.c (show_pcix): Don't touch pci_dev->hdrtype, it's an internal
1330 variable. Better read it from the config registers (it's cached anyway).
1332 * lib/sysfs.c (sysfs_scan), lib/proc.c (proc_scan): Don't read the hdrtype.
1333 lib/generic.c (pci_generic_fill_info): If hdrtype is -1 (unset), read it.
1334 Saves lots of unnecessary file accesses.
1336 * lib/pci.h (PCIADDR_PORT_FMT): Use %llx instead of %Lx, because the latter
1337 is not supported by all C libraries.
1339 * Makefile: Always enter the lib directory (remember that we don't have
1340 full dependencies for the library in the top-level Makefile; hmmm, another
1341 thing to rewrite some day).
1343 * lib/sysfs.c: Added Linux sysfs access method based on the patch
1344 written by Matthew Wilcox <willy@fc.hp.com>.
1346 * lib/proc.c: Renamed the access method name from "/proc/bus/pci" to "Linux-proc".
1348 * lib/pread.h: The hacks to support pread on various versions
1349 of Linux libc moved there.
1351 * lib/proc.c (proc_setup): The return value of snprintf() varies
1352 between glibc versions, so we need to check both for a negative
1353 values and for too large values.
1355 * Removed last few references to the "Linux PCI Utilities", the
1356 package is pretty cross-platform now :)
1358 2003-12-27 Martin Mares <mj@ucw.cz>
1360 * Released as 2.1.99-test2.
1362 * README, pciutils.lsm, pciutils.spec: Use @VERSION@ to make the
1363 release scripts insert the current version. "make release" is gone.
1365 * maint/release, maint/release.pm: Added a new system of scripts for
1366 making releases including inter-version diffs etc.
1368 * Makefile: Cleaned up.
1370 * lib/fbsd-device.c: I patched another copy of this file by mistake,
1371 this time the version checks should be right.
1373 2003-12-27 Martin Mares <mj@ucw.cz>
1375 * Released as 2.1.99-test1.
1377 * pciutils.h, common.c, lspci.man, setpci.man, lib/internal.h:
1378 Remove shadows of the syscall access method which was never
1381 * update-pciids.sh: Try to preserve permissions of the old file
1382 if chmod supports --reference. Should close Debian Bug #223740.
1384 * lib/proc.c (proc_setup): Increased path name length limit to 1024.
1385 Thanks for Redhat and Mandrake for inspiration.
1387 * lib/configure: Recognize ppc and ppc64, both have 64-bit addresses.
1388 Grabbed from Redhat (Fedora) patches.
1390 2003-12-27 Martin Mares <mj@ucw.cz>
1392 Merged bug fixes from Debian patches:
1394 * lspci.c (show_verbose): "Cache Line Size" should be capitalized.
1396 * lspci.c (show_pcix_nobridge): Added a missing newline.
1398 * lib/proc.c (proc_scan): When reading the header type, don't
1399 forget to clear the topmost bit indicating that the device has
1402 2003-12-27 Martin Mares <mj@ucw.cz>
1404 Updated the FreeBSD port. Thanks to Samy Al Bahra <samy@kerneled.com>
1407 * lib/Makefile: Add ${FREEBSD_SYS} to the include path if it's defined.
1408 * lib/fbsd-device.c: Select the right set of system includes according
1409 to __FreeBSD_version.
1411 2003-12-27 Martin Mares <mj@ucw.cz>
1413 Merged support for Solaris on i386 by Bill Moore <billm@eng.sun.com>
1416 * lib/configure: Recognize SunOS.
1417 * lib/internal.h: Learn how to recognize byte order on SunOS.
1418 * lib/i386-ports.c: Split OS-dependent I/O port access from i386-ports.c.
1419 * lib/i386-io-linux.h: Linux specific part.
1420 * lib/i386-io-hurd.h: GNU/Hurd specific part.
1421 * lib/i386-io-sunos.h: SunOS specific part.
1423 2003-12-26 Martin Mares <mj@ucw.cz>
1425 * lib/header.h (PCI_*_MASK): Cast to pciaddr_t explicitly.
1427 * lib/pci.h: Types declared in <sys/types.h> should be usable on all
1428 platforms we currently support, so kill the forest of #ifdef's and
1429 use them in all cases.
1431 * lib/pci.h: Use ULONG_MASK to decide whether we should use long
1432 or long long to represent a 64-bit address. Killed HAVE_LONG_ADDRESS.
1433 Define format strings for addresses, port numbers and IRQ numbers
1436 * lib/proc.c (proc_scan): Use PCIADDR_T_FMT for scanf'ing addresses.
1438 2003-12-26 Marco Gerards <metgerards@student.han.nl>
1440 Added support for the GNU Hurd (cleaned up by Martin Mares):
1442 * lib/configure [GNU]: Use the i386 ports for configuration access.
1443 * lib/i386-ports.c: Don't call iopl() on the Hurd.
1444 * lib/pci.h [OS_GNU]: Include <sys/types.h> and use it for defining
1447 2003-12-26 Martin Mares <mj@ucw.cz>
1449 * lspci.c (show_pcix_bridge, show_pcix_nobridge): Don't forget to call
1450 config_fetch() to ensure that the registers have been read. Thanks to
1451 Bill Wood <bill.wood@hp.com> for the patch.
1453 * lspci.c: Ensure that failure of config_fetch() is handled correctly
1456 * lspci.man: There was one more explicit reference to /usr/share/pci.ids.
1457 Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <macro@ds2.pg.gda.pl>.
1459 * setpci.c (main): Better error messages.
1461 * setpci.c (ex_op): The demo mode should disable only writing, not reading.
1463 * setpci.man: The documentation was inconsistent on what should -D do.
1464 Document the new behaviour.
1466 * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
1467 the GCC specific __attribute__((noreturn)) and killed the hack with
1468 redefining __attribute__ on non-GCC compilers.
1470 * Makefile: Added missing dependencies. Parallel builds work now.
1471 Problem reported by Andreas Haumer <andreas@xss.co.at>, but I chose
1474 * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
1475 command every time $(MANDIR) is referenced.
1477 * lspci.c (main): The error message for `lspci -s' incorrectly mentioned
1478 a `-f' switch. Reported by Steve Finney <Steve.Finney@SpirentCom.COM>.
1480 * lib/generic.c: Removed memory leak in pci_generic_bus_scan().
1481 Reported by Gary Parnes <gary_parnes@terago.com>.
1483 * Replaced obsolete syntax of __attribute__((unused)) in the middle of
1484 parameter declarations (which is no longer supported by GCC 3.1) by the
1485 current syntax (attribute at the end). Thanks to pixel@mandrakesoft.com
1486 for reporting this problem.
1488 * Removed CVS $Id$ tags from all files.
1490 * Makefile: Added some more warnings.
1492 * setpci.c: Cleaned up mask/value code.
1494 2003-12-08 Thayne Harbaugh <tharbaugh@lnxi.com>
1496 * setpci.c: Individual bits to be set can be specified as <value>:<mask>.
1498 2003-11-29 Martin Mares <mj@ucw.cz>
1500 * Imported the pciutils sources to my Arch repository. Good-bye, CVS.
1502 2003-01-04 Martin Mares <mj@ucw.cz>
1504 * Released as 2.1.11.
1506 * Makefile: Changed configuration of installation directories --
1507 all paths are now set at the top of the Makefile instead of being
1508 scattered between the installation rules. The default installation
1509 now goes always to /usr/local regardless of the OS as most distributions
1510 already contain some version of pciutils and we don't want custom
1511 installations to interfere with the default ones.
1513 * Makefile: Removed a couple of ancient install hacks: we no longer
1514 try to avoid overwriting a newer pci.ids file (users are now expected
1515 to use update-ids) and we don't try to remove /etc/pci.ids (a long time
1516 has passed since the last version which used it).
1518 * Makefile: Paths to pci.ids in man pages automatically get the right path.
1520 * Added the update-ids utility.
1522 * lib: Removed partially implemented "syscall" access method which will
1523 probably never be needed.
1525 2002-12-27 Martin Mares <mj@ucw.cz>
1527 * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.
1529 * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
1530 discontiguous numbering of functions. This is already present in the Linux
1531 kernel for several years, but I forgot to update pciutils as well.
1533 2002-12-26 Martin Mares <mj@ucw.cz>
1535 * lib/header.h, lspci.c: Dump AGP3 flags and speeds.
1537 * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
1538 there is no reason to prefer the kernel version.
1540 * lib/proc.c (proc_scan): Don't forget to initialize hdrtype.
1542 * Added preliminary version of NetBSD support by Quentin Garnier
1543 <netbsd@quatriemek.com>.
1545 2002-04-06 Martin Mares <mj@ucw.cz>
1547 * lspci.c: Mention "-xxx" in the help.
1549 2002-03-30 Martin Mares <mj@ucw.cz>
1551 * Released as 2.1.10.
1553 * Removed pci.ids from the CVS as they are now maintained separately.
1554 They are still included in the tarball, but if you are building pciutils
1555 from CVS sources or you want to get a newer ID file than the one distributed,
1556 just use "make update-ids" to download the most recent snapshot from
1559 * Makefile, README: Updated accordingly.
1561 * Makefile: Added a couple of maintenance targets.
1563 * maint/*: Maintainer's utilities now reside here (present only in CVS,
1564 not in the tarball).
1566 * lib/names.c (parse_name_list): End-of-line comments are no longer
1567 supported. Hashes are now perfectly valid in all names and they start
1568 a comment only at the start of the line.
1570 2002-03-26 Martin Mares <mj@ucw.cz>
1572 * README: Rewritten.
1574 * Makefile: When the currently installed pci.ids file is newer than
1575 the version to be installed, don't overwrite it. Suggested by
1576 Jean Delvare <khali@linux-fr.org>.
1578 2002-03-24 Martin Mares <mj@ucw.cz>
1580 * lspci.c (show_pcix_bridge): Added PCI-X capability display.
1581 Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
1583 * lib/header.h: Added PCI-X stuff. Again by Jeff.
1585 * Makefile (CFLAGS): -Werror is gone.
1587 * lspci.c (format_agp_rate): Fixed AGP rate reporting.
1589 * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
1592 * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
1593 or device hexadecimally, don't confuse it with chip vendor/device ID.
1594 First reported by Marc Boucher <marc@mbsi.ca>.
1596 2001-11-04 Martin Mares <mj@ucw.cz>
1598 * Released as 2.1.9.
1600 * pci.ids: Synced with the PCI ID Repository at SourceForge
1601 (http://pciids.sourceforge.net/).
1603 2000-08-25 Martin Mares <mj@albireo.ucw.cz>
1605 * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
1607 2000-06-13 Martin Mares <mj@albireo.ucw.cz>
1609 * Makefile (uninstall): Fixed.
1611 * pci.ids: ID updates.
1613 2000-05-20 Martin Mares <mj@albireo.ucw.cz>
1615 * Released as 2.1.8.
1617 * pci.ids: ID updates.
1619 * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
1621 2000-05-04 Martin Mares <mj@albireo.ucw.cz>
1623 * lspci.c (show_verbose): If the header type doesn't match device
1624 class, just print a warning and still use the header type, assuming
1627 2000-05-01 Martin Mares <mj@albireo.ucw.cz>
1629 * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
1631 * pci.ids: Updated Contemporary Control ARCnet card entries.
1633 * pci.ids: Synchronized class list with latest PCI SIG documents.
1635 2000-04-29 Martin Mares <mj@albireo.ucw.cz>
1637 * lib/names.c (pci_lookup_name): Fixed the cheat.
1639 * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
1641 * pci.ids: Various ID updates.
1643 2000-04-21 Martin Mares <mj@albireo.ucw.cz>
1645 * Released as 2.1.7.
1647 * pciutils.spec: Added German description.
1649 * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
1650 are the same as device ID and just output subsystem name according to
1653 * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
1655 * lib/pci.h: Added the correct typedefs for AIX.
1657 * lib/generic.c (pci_generic_scan_bus): Export.
1659 * lib/configure: Detect AIX. Use "echo '...\c'" instead of
1660 "echo -n" if the shell isn't bash.
1662 * lspci.c: Avoid using alloca() if not compiled by GCC.
1663 (insert_dev): Avoid returning a void value.
1665 * Makefile: Choose which install utility to use according to
1666 OS type. Also use `-o' instead of `-or' in find arguments.
1667 Part of the AIX port.
1669 * lib/aix-device.c: Added AIX low-level interface. Contributed
1670 by Dave Johnson <ddj@brown.edu>, thanks a lot!
1672 * pci.ids: Few new ID's.
1674 * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
1675 when not compiled by GCC.
1677 2000-04-17 Martin Mares <mj@albireo.ucw.cz>
1679 * Released as 2.1.6.
1681 * pci.ids: Added a large batch of ID's contributed by Gunther
1682 Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
1683 list with the 2.3.99pre6 kernel.
1685 Thu Mar 9 13:11:39 2000 Martin Mares <mj@albireo.ucw.cz>
1687 * lib/example.c: Added a simple example of how to use
1690 * lspci.man, setpci.man: Revealed --version. Well spotted
1693 * pci.ids: Added lots of new ID's and synced with 2.3.50.
1695 Tue Feb 15 00:16:21 2000 Martin Mares <mj@albireo.ucw.cz>
1697 * Released as 2.1.5.
1699 * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
1700 %{_mandir} to find the right location to install manual pages to.
1702 * pci.ids: New ID's.
1704 * setpci.c (main): Don't crash when `-s' or `-d' is given with
1707 Mon Jan 24 20:04:11 2000 Andreas Jaeger <aj@suse.de>
1709 * lib/i386-ports.c: Include <asm/io.h> only on systems without
1712 Mon Jan 24 11:24:43 2000 Martin Mares <mj@albireo.ucw.cz>
1714 * Makefile: Modified to work with the Linux FHS brain-damaged idea
1715 of putting man pages to /usr/share/man. Now we choose either /usr/man
1716 or /usr/share/man depending on which one exists.
1718 Sun Jan 23 10:52:34 2000 Martin Mares <mj@albireo.ucw.cz>
1720 * pci.ids: Synced with Linux 2.3.40.
1722 * Released as version 2.1.4.
1724 Thu Jan 20 11:08:32 2000 Martin Mares <mj@albireo.ucw.cz>
1726 * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
1728 * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
1730 * lspci.c (format_agp_rate): Better formatting of AGP rates.
1732 * pci.ids: New ID's.
1734 * lib/configure: Added configuration for ia64 (the same as for Alpha).
1735 Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
1737 Thu Jan 13 23:01:52 2000 Martin Mares <mj@albireo.ucw.cz>
1739 * Released as version 2.1.3.
1741 * pci.ids: New ID's.
1743 * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
1745 * lib/access.c: Corrected order of access methods -- it's wonderful how
1746 long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
1748 Sat Dec 11 23:34:48 1999 Martin Mares <mj@albireo.ucw.cz>
1750 * Released as version 2.1.2.
1752 * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
1754 Sat Dec 4 13:11:03 1999 Martin Mares <mj@albireo.ucw.cz>
1756 * Released as version 2.1.1.
1758 * pci.ids: Several new ID's.
1760 * setpci.c (exec_op): Don't forget to increment address after writing
1761 single value, so that `30.b=12,34,56,78' works as expected. Reported
1762 by Petr Soucek <petr@ryston.cz>.
1764 Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz>
1766 * lspci.c (show_terse): If prog-if is zero, but it's present in the
1769 Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
1771 * Released as version 2.1.
1773 * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
1774 lots of contributed entries.
1776 Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
1778 * pci.ids: Added lots of subsystem definitions.
1780 Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
1782 * setpci.man: Better example.
1784 * lspci.c: Resolve prog-if names.
1786 * lib/names.c: Adapted to new pci.ids syntax.
1788 * pci.ids: Reorganized the pci.ids file. Subsystems are listed
1789 under devices, classes can optionally contain prog-if information.
1790 New ID's, as usually.
1792 Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
1794 * pci.ids: New ID's. As usually.
1796 * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
1797 unless we're vvvery verbose.
1799 Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
1801 * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
1803 Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
1805 * pci.ids: New ID's. Again.
1807 Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
1809 * lspci.c (show_size): Don't show size if it's zero (usually
1810 due to bus-centric mode being enabled).
1812 Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
1814 * lib/pci.h: Types are OS dependent.
1816 * lib/internal.h: Byte order hacks are OS dependent.
1818 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
1820 * lib/Makefile, lib/access.c: Added fbsd-device target.
1822 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
1823 incorrectly set to device ID.
1825 * README: Added a note that we support FreeBSD.
1827 * Makefile (PREFIX, ROOT): Set it depending on the OS.
1828 (%.8): Grrr, BSD date is not able to convert date formats the same way
1829 as GNU date does. Use sed instead.
1830 (install): Use `-c' when calling install.
1832 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
1833 by Jari Kirma <kirma@cs.hut.fi>.
1835 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
1836 and pwrite only when we are certain it's safe (i.e., glibc 2.1
1837 on all architectures or any libc on a i386 where we really know
1838 how to use syscalls directly). In all other cases, emulate it
1839 with lseek/read/write.
1841 * pci.ids: Some more IDs.
1843 Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
1845 * pci.ids: Added IDs of parallel port controller cards as sent
1846 by Tim Waugh <tim@cyberelk.demon.co.uk>.
1848 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
1850 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
1852 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
1855 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
1856 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
1857 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
1858 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
1861 * lspci.c (show_msi): Added dumping of the MSI capability.
1862 (show_slotid): The same for SlotID capability.
1863 (show_caps): Separated capability dumping, because it should
1864 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
1865 layout of htype2, so I'm a bit unsure about it wrt capabilities
1866 -- they at least have to live somewhere else since address 0x34
1867 is already defined differently in htype2.
1869 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
1870 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
1871 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
1873 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
1874 (required by the PCI 2.2 specs).
1876 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
1878 * lspci.c (show_size): Added new function for dumping of region sizes.
1879 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
1882 * lib/pci.h (struct pci_dev): known_fields moved to the public part
1885 * Added support for region sizes. Needs support in the kernel, because
1886 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
1887 now returns a bitmask of what fields were really read.
1889 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
1892 Added `uninstall' target - removes all traces of pciutils.
1894 - Lots of cleanups in the ATI, S3, Adaptec vendors.
1895 - Changed Compaq QVision 1280/p definitions, as it's not possible
1896 to determine the revision from the device ID.
1897 - Same for the Tseng ET4000.
1898 The id's said I had a rev C, when it was actually a rev B.
1899 - Removed some unnecessary strings
1900 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
1901 `Ethernet card'. This should be determined from config space.
1902 - Lots of other new vendors & devices
1903 - Other additional small cleanups.
1905 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
1907 * lib/names.c (pci_lookup_name): When device ID lookup
1908 fails, return hexadecimal device ID instead of vendor ID.
1909 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
1910 I've just extended the fix to subsystem ID's.
1912 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
1914 * lspci.c (show_agp): Bug fix from Petr Vandrovec
1915 <vandrove@vc.cvut.cz>. The command register was displayed
1918 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
1920 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
1921 numbers if not supplied by the libc.
1923 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
1925 * Released the whole package as version 2.0.
1927 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
1929 * pci.ids: Added several new ID's contributed by people
1930 on the linux-pci list.
1932 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
1934 * lspci.c: Display I/O addresses correctly on sparc64.
1935 * lib/header.h: Ditto.
1937 * lib/configure: On sparc set HAVE_64BIT* as well, we want
1938 a binary which works on both 32bit and 64bit SPARCs.
1940 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
1942 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
1945 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
1947 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
1949 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
1950 as a multi-function device, because several single-function devices
1951 don't decode the function bits at all.
1953 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
1955 * Makefile (install): Don't use "-o root -g root" for installation
1956 since it breaks on machines where programs are not installed by root.
1957 Reported by Richard Gooch <rgooch@atnf.csiro.au>
1959 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
1961 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
1963 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
1964 or 64-bit depending on CPU.
1966 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
1967 according to bus address width.
1969 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
1971 * Released as 1.99.4.
1973 * lspci.c: Capability list parser now recognizes both AGP
1974 registers and PCI Power Management registers (the latter
1975 is mainly guesswork based on DEC/Intel 21153 bridge specs
1976 since I don't have the PCI Power Management document).
1978 * lspci.c: Replaced numerous occurrences of (x & flag) ? '+' : '-'
1981 * lspci.c: Added bridge checks to bus mapping code.
1983 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
1985 * lspci.c: Implemented bus mapping mode (-M).
1987 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
1988 (show): Split to show() and show_device().
1990 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
1991 set it to the real access method afterwards.
1993 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
1995 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
1996 don't check PCI_COMMAND for I/O and memory enables.
1998 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
2000 * Makefile: Added target `release' which substitutes new version
2001 number to .spec, .lsm and README. Also rewrote target `dist'.
2003 * Released as 1.99.3.
2005 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
2007 * lib/header.h: Until kernel adopts new layout of PCI
2008 includes (i.e., separate declaration of header structure,
2009 functions and device IDs), which is not going to happen
2010 before 2.3, we'll use our own definition of the header.
2012 * lspci.c (show_verbose): Display `Cap' flag in device status.
2014 * lspci.c (show_htype0): Display capability lists wherever
2015 available. The only capability name we recognize now is `AGP'.
2016 Unfortunately, capabilities are stored in device-dependent
2017 portion of the configuration space and are thus available
2018 only to root unless you read a dump.
2020 * lspci.c (scan_devices): Use cache instead of buffering.
2022 * lib/buffer.c: Removed (obsoleted by the cache).
2024 * lib/access.c: Added general caching mechanism.
2026 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
2028 * pci.ids: Added few devices.
2030 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
2032 * Version string is now defined in top-level Makefile, exported
2033 to the configure script and also substituted to man pages.
2035 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
2036 (show_verbose): Rewrote interrupt display logic.
2038 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
2040 * lib/configure: Rewrote detection of Linux versions. Now it
2041 works on 2.0 kernels (only with direct/dump access, of course).
2043 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
2046 * lib/proc.c (proc_read, proc_write): Distinguish between short
2047 read/write and real errors.
2049 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
2050 libpci respects buscentric mode automatically.
2052 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
2053 bytes of header (the whole standard part).
2055 * common.c: pcilib options are now all uppercase. Also moved
2056 PCI access debugging option here.
2058 * Released as 1.99.2.
2060 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
2062 * Wrote configure script and rewrote Makefiles.
2064 * Removed few unused variables.
2066 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
2068 * common.c: Moved several functions used in both setpci and lspci
2069 here. This includes parsing of libpci-related options.
2071 * More library tweaks.
2073 * filter.c, names.c: Moved to library.
2075 * setpci: Rewritten to use the library.
2077 * Released as 1.99.1.
2079 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
2081 * lspci.c (scan_devices): For cardbus bridges, read first 128
2082 bytes of config space to get full standard header.
2084 * Makefile (CFLAGS): Removed "-Wno-unused".
2086 * Started the "New Generation" branch and introduced the
2089 * lspci: Rewritten to use the library.
2091 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
2093 * Released as version 1.10.
2095 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
2097 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
2098 Dag Wieers <dag@digibel.be>.
2100 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
2102 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
2104 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
2106 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
2108 * Released as version 1.09.
2110 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
2112 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
2113 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
2115 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
2117 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
2119 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
2121 * Released as version 1.08.
2123 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
2125 * lspci.8: Changed warning about lspci -xxx.
2127 * lspci.c: Require "-xxx" for full configuration space dump, so that
2128 it's impossible to crash the machine by single typo.
2130 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
2132 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
2134 * lspci.c (show_bases): Better displaying of unassigned and
2135 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
2138 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
2140 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
2141 (thanks to Geert Uytterhoeven for finding this out)
2143 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
2145 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
2146 (show_machine): Print subsystem ID.
2148 * names.c: New name resolution engine supporting subsystem IDs.
2150 * Released as version 1.07.
2152 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
2154 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
2155 (show_bases): Honor the `cnt' argument.
2156 (grow_tree): Parse CardBus headers in tree mode as well.
2158 * pci.h: Updated CardBus header field description. I still don't
2159 have the CardBus standard available, but OZ6832 specs contain
2160 full description of all header fields supported by the chip.
2162 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
2166 * names.c (parse_name_list): Killed an unused variable.
2168 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
2169 if they are not defined by glibc (needed for glibc built on older
2172 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
2174 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
2178 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
2179 should be gone. Again thanks to Steve for bug report.
2181 * filter.c (filter_parse_slot): Fixed ":x" type filters.
2183 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
2184 <steve@icarus.com> for reporting this.
2186 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
2188 * lspci.c (main), setpci.c (main): Implemented "--version".
2192 * pciutils.h (PCIUTILS_VERSION): Added version string.
2194 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
2195 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
2198 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
2200 * pci.ids: More updates from Jens Maurer.
2202 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
2204 * pci.ids: Updates from Jens Maurer.
2206 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
2210 * setpci.8: Written.
2212 * setpci.c: Finished.
2214 * lspci.c: Now able to fetch expansion ROM base from kernel device list
2215 and print it if not in buscentric mode.
2217 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
2221 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
2223 * lspci.8: Updated the documentation.
2225 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
2227 * filter.c: Introduced new generic device filter.
2229 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
2231 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
2232 of PCI-to-PCI bridges in the tree format.
2234 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
2236 * lspci.c (show_machine): Added non-verbose mode of machine-readable
2239 * pci.ids: Updates from Jens Maurer.
2241 * Released as version 1.02.
2243 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
2245 * lspci.c: Added a "-m" switch for dumping machine-readable
2246 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
2248 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
2250 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
2251 if available. This should avoid all problems with official kernel
2252 not synchronized to newer PCI code in CVS -- standard distribution
2253 of pciutils now contains pci.h from current CVS kernel, pciutils
2254 in CVS contain no pci.h and use the correct kernel include.
2256 * Makefile: Fixed installation path for man pages.
2258 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
2262 * lspci.8: Created a man page.
2264 * Releasing as version 1.0.
2266 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
2268 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
2269 to all the C sources. This should eliminate problems with 32-bit compilers
2272 * lspci.c (show_verbose): Recognize CardBus bridge header type.
2273 (show_htype2): Stub routine.
2274 (scan_config): Write sensible error message if the kernel denies reading of
2275 upper part of the PCI config space.
projects / pciutils.git / blob