1 2007-10-05 Martin Mares <mj@ucw.cz>
3 * lspci.c (show_caps, show_ext_caps): Detect and report loops in
6 2007-09-12 Hasso Tepper <hasso@estpak.ee>
8 * Extended the fbsd-device backend to run on Dragonfly BSD.
10 * lspci.c: alloca() is declared in <stdlib.h> on BSD's, not <alloca.h>.
12 2007-09-03 Martin Mares <mj@ucw.cz>
14 * Resurrected the Windows port, including cross-compilation by MinGW.
15 Patch by Samuel Bronson <naesten@gmail.com>.
17 2007-08-31 Martin Mares <mj@ucw.cz>
19 * Makefile, lib/Makefile: `ar' and `ranlib' can be overriden to allow
22 2007-08-27 Martin Mares <mj@ucw.cz>
24 * lib/names.c (pci_open): When calling gzopen(), use "rb" file mode
25 instead of "r". This is needed on DOS systems, where this function
26 somewhat illogically uses the binary flag for the compressed file
27 instead of the decompressed stream inside, where binariness really
30 2007-08-14 Martin Mares <mj@ucw.cz>
32 * lspci.c (show_ht): Added decoding of Hypertransport MSI mapping capability,
33 based on a patch by Jason Gunthorpe.
35 * tests/cap-MSI-mapping: Added a test case. I plan to add test cases
36 (which are dumps of config space) for all new features.
38 2007-06-20 Martin Mares <mj@ucw.cz>
42 * Makefile: Added an "install-lib" target. Thanks to Dan Nicholson
45 * Makefile, lib/Makefile: Generate and install pkg-config file
46 for libpci. Again by Dan Nicholson.
48 2007-06-20 Thomas Schwinge <tschwinge@gnu.org>
50 * lib/i386-io-hurd.h: Rewritten for new Hurd kernels.
52 2007-05-04 Martin Mares <mj@ucw.cz>
56 * pci.ids: Updated to the current snapshot of the database.
58 2007-02-14 Martin Mares <mj@ucw.cz>
60 * lspci.c (show_express): Added PCI/PCI-X to PCI-Express Bridge type.
63 2007-02-09 Martin Mares <mj@ucw.cz>
65 * pci.ids: Updated to the current snapshot of the database.
67 2007-02-06 Martin Mares <mj@ucw.cz>
69 * Replaced bzero() by memset() everywhere, it's better to lose a tiny
70 bit of readability than maintain hacks to make it work on various systems.
72 * lib/configure: tr on Solaris is a bit weird and it requires `[A-Z]'
73 instead of `A-Z'. Fortunately, the extra brackets don't hurt otherwise.
75 * lib/types.h, lib/configure: Solaris should use <stdint.h> to get precise
78 2007-02-04 Martin Mares <mj@ucw.cz>
80 * lspci.c: alloca() needs <alloca.h>.
82 2006-09-17 Martin Mares <mj@ucw.cz>
84 * lib/dump.c: Fixed a couple of bugs in the dump backend which caused
85 devices with domains or with extended config space to be read incorrectly.
86 Also, dumps with partial lines are allowed now.
88 2006-09-10 Martin Mares <mj@ucw.cz>
90 * pci.ids: Updated to the current database snapshot.
92 * lspci.c (scan_device): If an error occurs when reading the standard config
93 header of a device, report it and ignore the device and return with exit
96 2006-09-09 Martin Mares <mj@ucw.cz>
100 * maint/release: Remind the maintainer about the current PCI_LIB_VERSION.
102 * lib/pci.h: Updated PCI_LIB_VERSION.
104 * lspci.c (show_machine): In the `-m' mode, do proper shell escaping
105 if the fields printed contain quotes or backslashes.
107 * lspci.c (show_machine): Added a `-vmm' mode, which removes the misuse
108 of the `Device' tag for two different purposes.
110 * Makefile: Moved all system-dependent decisions to lib/configure,
111 since config.mk is included in the top-level Makefile anyway.
113 * lib/configure: When configuring for Linux, ignore the kernel version
114 and always build all access methods.
116 * Makefile (CFLAGS): Removed -Winline, it's not needed and triggers
117 at many non-interesting places with gcc 3.4.
119 * Whitespace cleanup of all source files.
121 * The pci.ids file can be stored compressed if zlib is available.
122 Added transparent decompression to lib/names.c, modified update-pciids.sh
123 to keep the file compressed if applicable, updated Makefiles.
124 Based on a patch by Matthew Wilcox, but all the bugs are mine.
126 * Makefile, README: Allow installation to be done to a different directory
127 from the one we will eventually be placed in by setting DESTDIR.
128 Patch by Matthew Wilcox.
130 * Added .gitignore files.
132 * Makefile (clean): Clean *.orig, too.
134 * Cleaned up usage of `char' and `byte'.
136 * lib/header.h: PCI_CLASS_DOCKING_OTHER should be 0x0a80, not 0x0a01.
138 * lib/header.h: Added PCI_CLASS_xxx constants for all classes currently
139 defined in the pci.ids file.
141 2006-08-01 Martin Mares <mj@ucw.cz>
143 * lib/i386-io-hurd.h: Fixed a silly typo.
145 2006-07-30 Martin Mares <mj@ucw.cz>
147 * lib/Makefile: Added a missing rule for obsd-device.o.
149 * lspci.c, lib/header.h: Added support for MSI per-vector masking.
150 Contributed by Petr Vandrovec.
152 * lspci.c, lib/header.h: Added support for the `bridge subsystem ID'
153 capability. Contributed by Petr Vandrovec.
155 * lspci.c (show_htype1): Fixed bug in printing of 64-bit prefetchable
156 memory windows. Fix by Petr Vandrovec.
158 * maint/release.pm: Exclude .git directory from releases.
160 * lib/i386-ports.c, lib/i386-io-*: Report failures during port access
161 initialization by a->warn() instead of calling printf() or perror()
164 * lib/i386-ports.c, lib/i386-io-*: Moved the logic which keeps track of
165 the port access state to generic code.
167 * lib/i386-io-hurd.h: Ask the kernel for I/O port access appropriately.
168 Contributed by Thomas Schwinge and Samuel Thibault.
170 * lib/i386-ports.c: Define _GNU_SOURCE, it's needed by the Hurd module.
172 * lib/header.h: Whitespace cleanups.
174 * lib/i386-io-windows.h: Fixed indentation and spelling.
176 * README.Windows: Mention that WinIO.dll is needed and where to get it.
178 2006-06-27 Martin Mares <mj@ucw.cz>
180 * lib/Makefile, Makefile: Added rules for building and cleaning the example.
182 * lib/example.c: Show how to use PCI_FILL_CLASS and used another register
183 for demonstrating the config space accesses. The example is still very
186 * lib/pci.h, lib/generic.c: Added PCI_FILL_CLASS.
188 * lib/sysfs.c: Fetch device ID and class from sysfs, because they can
189 be modified by kernel fixups.
191 * lspci.c: Use PCI_FILL_CLASS. Thanks to Matthew Willcox for the patch.
193 2006-06-03 Martin Mares <mj@ucw.cz>
195 * lspci.c: Introduced the -nn switch. Thanks to David N. Welton
198 * lib/names.c (pci_lookup_name): Introduced PCI_LOOKUP_MIXED and
199 cleaned up the name selection code.
201 * lib/names.c (pci_lookup_name): If PCI_LOOKUP_NO_NUMBERS is given,
202 pci_access->numeric_ids is ignored.
204 * lib/names.c (pci_lookup_name): When class is identified and
205 subclass isn't, display class name and subclass number.
207 2006-05-31 Martin Mares <mj@ucw.cz>
209 * setpci.c (main): Don't crash when an invalid width is specified.
211 * lspci.c, setpci.c, common.c: die() now uses the right program
212 name when printing an error message.
214 2006-05-19 Martin Mares <mj@ucw.cz>
216 * README: Mention the public GIT tree.
218 * README: Updated the list of ports.
220 2006-05-10 Martin Mares <mj@ucw.cz>
222 * lib/configure, lib/fbsd-device.c: Added support for GNU/kFreeBSD.
223 Thanks to Petr Salinger for the patch.
225 2006-05-05 Martin Mares <mj@ucw.cz>
229 * lspci.c (scan_device): The -D switch didn't work as intended
232 2006-05-05 Martin Mares <mj@ucw.cz>
236 * pci.ids: Updated to the current database snapshot.
238 * lib/obsd-device.c (and other files in lib/*): Added OpenBSD
239 interface by Matthieu Herrb <matthieu.herrb@laas.fr>, based on
240 the existing FreeBSD interface.
242 * Moved pciutils to a GIT repository, which now contains merged
243 history from both CVS and Arch. Good bye, TLA!
245 2006-03-21 Martin Mares <mj@ucw.cz>
247 * lspci.c (show_slot_name): Avoid the previous changes in default
248 display of domain name when in machine-readable mode. However, `-D'
249 forces domain display even there.
251 * lspci.man: Added a warning on -m being the only format, which is
252 guaranteed to be stable between lspci versions.
254 2006-03-13 Martin Mares <mj@ucw.cz>
256 * lspci.man: Documented the -D switch.
258 * lspci.c (show_slot_name, scan_device): If there are multiple PCI
259 domains or if the `-D' switch is used, show the domain number for
262 * lspci.c (show_verbose): Report cache line size in bytes.
264 * update-pciids.sh: Use curl if available. Patch by Matthew Wilcox.
266 2006-01-04 Martin Mares <mj@ucw.cz>
268 * lspci.c (show_express_link): Fixed decoding of link status register.
269 Thanks to Roland Dreier for his report.
271 2005-12-12 Martin Mares <mj@ucw.cz>
273 * lib/nbsd-libpci.c: If libpci is used by an ordinary user, allow
274 at least read-only access. Patch by Pavel Celeda <celeda@liberouter.org>.
276 * Makefile: Corrected library path on NetBSD.
278 2005-11-26 Martin Mares <mj@ucw.cz>
282 * lspci.c (show_machine): Subsystem vendors were printed incorrectly
283 in machine-readable modes. Thanks to Pavel Celeda for a bug report.
285 2005-10-11 Martin Mares <mj@ucw.cz>
287 * lspci.c (new_bus): Fixed a memory leak. Thanks to Paul Sangree for reporting it.
289 2005-09-21 Martin Mares <mj@ucw.cz>
293 * pci.ids: Updated copyright header.
295 * lib/sysfs.c (sysfs_get_resources): Removed warning about unsupported
296 64-bit addresses, they are now always supported.
298 * lspci.c (show_bases): Corrected printing of 64-bit addresses
301 * lib/configure: Enable 64-bit addresses on all Linux systems.
303 * lib/types.h: Don't pad 64-bit addresses to 16 xigits, only to 8 if they
306 2005-09-11 Martin Mares <mj@ucw.cz>
308 * Released as 2.1.99-test11.
310 * lspci.c: Removed unnecessary trailing zeros in pci_lookup_name() calls.
312 2005-09-10 Martin Mares <mj@ucw.cz>
314 * Released as 2.1.99-test10.
316 * pci.ids: Synchronized with the current database snapshot.
318 * update-pciids.sh: Changed the default URL for downloading pci.ids
319 to http://pciids.sourceforge.net/v2.2/pci.ids.
321 * lib/pci.h (PCI_LIB_VERSION): Added version identifier.
323 * lib/names.c: Rewritten the name database module almost from scratch.
324 Everything is much cleaner and there are hopefully no more memory leaks;
325 pci_lookup_name() now uses varargs in a backward compatible fashion.
326 Introduced PCI_LOOKUP_NO_NUMBERS.
328 The new code supports subsystem entries not tied to a specific device.
329 I had to extend the format of pci.ids in order to support it, so I have
330 extended the idea of the "C" (class) blocks and introduced "S" blocks
331 for subsystems. To avoid doing more incompatible changes in the future,
332 the parser skips unknown single-letter blocks without reporting errors.
334 2005-08-23 Martin Mares <mj@ucw.cz>
336 * Released as 2.1.99-test9.
338 * Makefile (OPT): Removed -fomit-frame-pointer, it's default in recent
339 gcc versions when optimizing anyway.
341 * Made the path to pci.ids customizable and independent on the SHAREDIR.
342 Just override IDSDIR in the top-level Makefile.
344 * pci.ids: Synchronized with the current database snapshot.
346 * lspci.man, setpci.man: Improved the man pages. Documented all access
347 methods and which operations are privileged.
349 * lspci.c: Another rewrite of config register caching, now also including
350 lots of internal checks. It should be now perfectly able to cope with
351 portions of the configuration space being inaccessible, for example
352 due to insufficient access rights.
354 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Cleaned up dumping of PCI-X
355 capabilities. Includes partial support for PCI-X 2.0 (probably incomplete
356 as I haven't seen the spec).
358 * lspci.c: Quell warnings about unused parameters.
360 * lspci.c: Removed C++ comments.
362 * lib/header.h: Merged definitions of extended capabilities and some new
363 PCI-X capability bits from linux-2.6.11/include/pci.h.
365 * lspci.c (show_caps): Try to scan extended capabilities only if the
366 device has either PCI-X or PCI Express capability in its normal capability
369 * lib/dump.c (dump_init): Reading of dumps works again. The dump reader
370 now also remembers how much data it has read and refuses attempts to
371 access more than that.
373 * setpci.man, lspci.c, README: prefer spelling "buses" over "busses".
375 * lspci.c: If alloca() is not available, use xmalloc(), not malloc().
377 * lib/configure: Added x86_64 on Linux.
379 2005-08-22 Martin Mares <mj@ucw.cz>
381 * lib/filter.c (pci_filter_parse_slot): Fixed parsing of domain filters.
382 Thanks to Matthew Wilcox for bug report.
384 * lspci.c: Corrected spelling of "Hz" (it was "hz" at several places).
385 Thanks to Krzysztof Oledzki for pointing that out.
387 2004-08-19 Martin Mares <mj@ucw.cz>
389 * pciutils.spec (%attr): Setting attributes for /sbin/* is an anachronism,
390 because pciutils by default install to /usr/sbin. Update.
392 2004-08-13 Martin Mares <mj@ucw.cz>
394 * Released as 2.1.99-test8.
396 * lib/types.h, lib/pci.h, lib/sysdep.h: `byte' and `word' are
397 no longer exported to the outside world.
399 * README.Windows: Updated.
401 * maint/release: Substitute version number in win32/config.h.
403 * win32/config.h: Added.
405 * lib/sysdep.h (bzero, strcasecmp): are macros on Windows.
407 * compat/getopt.[ch]: Added copies of getopt.[ch] from the GNU
408 C library for use on systems where the default libraries lack
409 proper getopt. Currently used by the Windows port.
411 * lib/sysdep.h, lib/types.h: Updates of the Windows port from
414 * lib/types.h: If PCI_HAVE_Uxx_TYPES is defined, libpci doesn't define
415 its own u8, u16, u32, byte and word types and uses what the user
416 has supplied instead. With this change, all namespace clashes should
419 * Makefile, lib/Makefile: Updated dependencies.
421 * pciutils.h: Include lib/sysdep.h and move NONRET et al. there.
423 * lib/sysdep.h: No need to include <sys/types.h> on FreeBSD, because
424 it is included unconditionally in lib/types.h.
426 * Moved system-dependent stuff from lib/internal.h to lib/sysdep.h,
427 which is also used by the utilities. Also moved type declarations
428 from lib/pci.h to lib/types.h.
430 * All files: Prepend a "PCI_" prefix in front of all configuration
431 defines to avoid namespace clashes. CAVEAT: If there is any libpci
432 application using the (undocumented) defines, it has to be updated.
434 * lib/Makefile: Killed HAVE_OWN_HEADER_H, since we stopped sharing
435 headers with the kernel a couple of years ago.
437 * lib/sysfs.c (sysfs_get_resources): We have 7 resources, not 6.
439 * lspci.c (show_rom): Use the same logic for printing disabled
440 or unassigned ROM's as we do in show_bases() for the other BAR's.
442 * lib/generic.c (pci_generic_fill_info): Better reaction to
443 invalid 64-bit addresses. Also d->hdrtype should not include
444 bit 7, which caused mysterious errors on multi-function devices.
446 * lib/generic.c (pci_generic_fill_info): Fill in base addresses
447 even if the regions are known to be disabled. It is the client's
448 job to interpret them. (And it is not a trivial job if you want
449 to do it correctly, since you need to check I/O and memory enables
450 on all upstream bridges, too.) However, it could be interesting to
451 introduce functions for interpreting the addresses and even for
452 mapping the regions and doing I/O on them.
454 2004-07-30 Martin Mares <mj@ucw.cz>
456 * lspci.c: HyperTransport improvements from Maciej.
458 2004-07-11 Martin Mares <mj@ucw.cz>
460 * lib/sysfs.c (sysfs_get_resources): Arguments now correspond
461 to the format string. [Patch by Bill Nottingham]
463 2004-07-05 Martin Mares <mj@ucw.cz>
465 * Released as 2.1.99-test7.
467 * lspci.c (config_fetch): Wanted to merge Matthew's bug fix, but
468 ended up with rewriting the fetching mechanism to be fully dynamic,
469 but avoid reading config space registers not explicitly requested.
471 2004-06-29 Matthew Wilcox <willy@debian.org>
473 * lspci.c: More work on PCI Express dumping.
475 * lib/header.h: Updated PCI Express capability definitions.
477 * lib/proc.c (proc_read): Removed bogus warning.
479 * common.c (xrealloc): Introduced.
481 * lspci.man: Added -xxxx.
483 2004-06-27 Martin Mares <mj@ucw.cz>
485 * Released as 2.1.99-test6.
487 * lspci.c (show_msix), lib/header.h: Added dumping of MSI-X cap.
488 Patch by Roland Dreier <roland@topspin.com>, cleaned up by me.
490 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Handle config_fetch()
493 * lib/header.h: Added PCI Express extended capabilities. Again by Matthew.
495 * lspci.c (show_express): Added dumping of PCI Express cap.
496 Patch by Matthew Wilcox.
498 * lib/header.h: Added a list of PCI 3.0 capabilities and also details
499 on PCI Express caps. Patch by Matthew Wilcox <willy@debian.org>.
501 * lspci.c (check_root): Gone. No explicit checks for root are needed,
502 report correct errors reported by the libpci instead.
504 * lspci.c: Added dumping of the extended config space on "-xxxx".
505 Better caching of config registers.
507 * setpci.c (main): Allow access to whole 4096 bytes of the config space.
509 * lib/sysfs.c, lib/proc.c: Don't print error messages on short reads,
510 just return the appropriate error code.
512 * lib: Added support for extended (4096-byte) configuration space,
513 currently implemented only in Linux proc and sysfs access methods
514 and of course in the dump reader.
516 2004-05-29 Martin Mares <mj@ucw.cz>
518 * Released as 2.1.99-test5.
520 * lib/pci.h: Windows don't have the standard u_int* types.
522 * lib/internal.h: <sys/param.h> required on Windows for endianity
525 * lib/i386-ports.c: Connected i386-io-windows.h.
527 * lspci.c (check_root): geteuid() is not available on Windows.
529 * lib/i386-io-windows.h: Added Windows port contributed by Alexander
530 Stock <stock.alexander@gmx.de>.
532 * lib/configure: Hopefully fixed SunOS port broken by various
533 changes to the configure script.
535 * Makefile, lib/configure: Cross-compilation support, patch by Maciej.
537 2004-05-28 Martin Mares <mj@ucw.cz>
539 * Released as 2.1.99-test4.
541 * lspci.c (show_verbose): Header type 1 is probably legal for all
542 types of bridges, not only for PCI-to-PCI bridges.
544 * lspci.c (format_agp_rate): Write "x16", not "x@".
545 (show_agp): rate[] could overflow.
546 Bugs reported by Jakub Bogusz <qboosh@pld-linux.org>.
548 * lspci.c (show_ht_*): Show HyperTransport capability with all its
549 details. Once again code by Maciej simplified (i.e., possibly broken)
552 * lib/header.h: Added declarations of HyperTransport capability.
553 Again thanks to Maciej.
555 * lspci.c: Decode all bits of the secondary status word in type 1 headers.
556 Thanks to Maciej W. Rozycki <macro@ds2.pg.gda.pl> for the patch.
558 2003-12-27 Martin Mares <mj@ucw.cz>
560 * Released as 2.1.99-test3.
562 * lspci.man, setpci.man: Document domains and correct spelling.
564 * lib/dump.c (dump_init): Added ability to read domain numbers.
566 * lspci.c: Devices in domains different from 0 have their slot number
567 printed as "<domain>:<bus>:<slot>.<func>". Tree view supports domains
570 * lib/filter.c: Slot filters understand domains.
572 * lib/generic.c: Mention the domain in slot numbers in all error messages.
574 * lib/internal.h: The #ifdef for Linux <asm/byteorder.h> was wrong.
576 * lib/access.c (pci_get_dev): Added support for domains.
578 * lib/sysfs.c (sysfs_scan): Read vendor and device ID from the config
579 registers (or to be precise, leave it for the generic parts of the pcilib
580 to do so) instead of reading them from the sysfs. It's faster this way.
582 * lspci.c (show_pcix): Don't touch pci_dev->hdrtype, it's an internal
583 variable. Better read it from the config registers (it's cached anyway).
585 * lib/sysfs.c (sysfs_scan), lib/proc.c (proc_scan): Don't read the hdrtype.
586 lib/generic.c (pci_generic_fill_info): If hdrtype is -1 (unset), read it.
587 Saves lots of unnecessary file accesses.
589 * lib/pci.h (PCIADDR_PORT_FMT): Use %llx instead of %Lx, because the latter
590 is not supported by all C libraries.
592 * Makefile: Always enter the lib directory (remember that we don't have
593 full dependecies for the library in the top-level Makefile; hmmm, another
594 thing to rewrite some day).
596 * lib/sysfs.c: Added Linux sysfs access method based on the patch
597 written by Matthew Wilcox <willy@fc.hp.com>.
599 * lib/proc.c: Renamed the access method name from "/proc/bus/pci" to "Linux-proc".
601 * lib/pread.h: The hacks to support pread on various versions
602 of Linux libc moved there.
604 * lib/proc.c (proc_setup): The return value of snprintf() varies
605 between glibc versions, so we need to check both for a negative
606 values and for too large values.
608 * Removed last few references to the "Linux PCI Utilities", the
609 package is pretty cross-platform now :)
611 2003-12-27 Martin Mares <mj@ucw.cz>
613 * Released as 2.1.99-test2.
615 * README, pciutils.lsm, pciutils.spec: Use @VERSION@ to make the
616 release scripts insert the current version. "make release" is gone.
618 * maint/release, maint/release.pm: Added a new system of scripts for
619 making releases including inter-version diffs etc.
621 * Makefile: Cleaned up.
623 * lib/fbsd-device.c: I patched another copy of this file by mistake,
624 this time the version checks should be right.
626 2003-12-27 Martin Mares <mj@ucw.cz>
628 * Released as 2.1.99-test1.
630 * pciutils.h, common.c, lspci.man, setpci.man, lib/internal.h:
631 Remove shadows of the syscall access method which was never
634 * update-pciids.sh: Try to preserve permissions of the old file
635 if chmod supports --reference. Should close Debian Bug #223740.
637 * lib/proc.c (proc_setup): Increased path name length limit to 1024.
638 Thanks for Redhat and Mandrake for inspiration.
640 * lib/configure: Recognize ppc and ppc64, both have 64-bit addresses.
641 Grabbed from Redhat (Fedora) patches.
643 2003-12-27 Martin Mares <mj@ucw.cz>
645 Merged bug fixes from Debian patches:
647 * lspci.c (show_verbose): "Cache Line Size" should be capitalized.
649 * lspci.c (show_pcix_nobridge): Added a missing newline.
651 * lib/proc.c (proc_scan): When reading the header type, don't
652 forget to clear the topmost bit indicating that the device has
655 2003-12-27 Martin Mares <mj@ucw.cz>
657 Updated the FreeBSD port. Thanks to Samy Al Bahra <samy@kerneled.com>
660 * lib/Makefile: Add ${FREEBSD_SYS} to the include path if it's defined.
661 * lib/fbsd-device.c: Select the right set of system includes according
662 to __FreeBSD_version.
664 2003-12-27 Martin Mares <mj@ucw.cz>
666 Merged support for Solaris on i386 by Bill Moore <billm@eng.sun.com>
669 * lib/configure: Recognize SunOS.
670 * lib/internal.h: Learn how to recognize byte order on SunOS.
671 * lib/i386-ports.c: Split OS-dependent I/O port access from i386-ports.c.
672 * lib/i386-io-linux.h: Linux specific part.
673 * lib/i386-io-hurd.h: GNU/Hurd specific part.
674 * lib/i386-io-sunos.h: SunOS specific part.
676 2003-12-26 Martin Mares <mj@ucw.cz>
678 * lib/header.h (PCI_*_MASK): Cast to pciaddr_t explicitly.
680 * lib/pci.h: Types declared in <sys/types.h> should be usable on all
681 platforms we currently support, so kill the forest of #ifdef's and
682 use them in all cases.
684 * lib/pci.h: Use ULONG_MASK to decide whether we should use long
685 or long long to represent a 64-bit address. Killed HAVE_LONG_ADDRESS.
686 Define format strings for addresses, port numbers and IRQ numbers
689 * lib/proc.c (proc_scan): Use PCIADDR_T_FMT for scanf'ing addresses.
691 2003-12-26 Marco Gerards <metgerards@student.han.nl>
693 Added support for the GNU Hurd (cleaned up by Martin Mares):
695 * lib/configure [GNU]: Use the i386 ports for configuration access.
696 * lib/i386-ports.c: Don't call iopl() on the Hurd.
697 * lib/pci.h [OS_GNU]: Include <sys/types.h> and use it for defining
700 2003-12-26 Martin Mares <mj@ucw.cz>
702 * lspci.c (show_pcix_bridge, show_pcix_nobridge): Don't forget to call
703 config_fetch() to ensure that the registers have been read. Thanks to
704 Bill Wood <bill.wood@hp.com> for the patch.
706 * lspci.c: Ensure that failure of config_fetch() is handled correctly
709 * lspci.man: There was one more explicit reference to /usr/share/pci.ids.
710 Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <macro@ds2.pg.gda.pl>.
712 * setpci.c (main): Better error messages.
714 * setpci.c (ex_op): The demo mode should disable only writing, not reading.
716 * setpci.man: The documentation was inconsistent on what should -D do.
717 Document the new behaviour.
719 * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
720 the GCC specific __attribute__((noreturn)) and killed the hack with
721 redefining __attribute__ on non-GCC compilers.
723 * Makefile: Added missing dependencies. Parallel builds work now.
724 Problem reported by Andreas Haumer <andreas@xss.co.at>, but I chose
727 * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
728 command every time $(MANDIR) is referenced.
730 * lspci.c (main): The error message for `lspci -s' incorrectly mentioned
731 a `-f' switch. Reported by Steve Finney <Steve.Finney@SpirentCom.COM>.
733 * lib/generic.c: Removed memory leak in pci_generic_bus_scan().
734 Reported by Gary Parnes <gary_parnes@terago.com>.
736 * Replaced obsolete syntax of __attribute__((unused)) in the middle of
737 parameter declarations (which is no longer supported by GCC 3.1) by the
738 current syntax (attribute at the end). Thanks to pixel@mandrakesoft.com
739 for reporting this problem.
741 * Removed CVS $Id$ tags from all files.
743 * Makefile: Added some more warnings.
745 * setpci.c: Cleaned up mask/value code.
747 2003-12-08 Thayne Harbaugh <tharbaugh@lnxi.com>
749 * setpci.c: Individual bits to be set can be specified as <value>:<mask>.
751 2003-11-29 Martin Mares <mj@ucw.cz>
753 * Imported the pciutils sources to my Arch repository. Good-bye, CVS.
755 2003-01-04 Martin Mares <mj@ucw.cz>
757 * Released as 2.1.11.
759 * Makefile: Changed configuration of installation directories --
760 all paths are now set at the top of the Makefile instead of being
761 scattered between the installation rules. The default installation
762 now goes always to /usr/local regardless of the OS as most distributions
763 already contain some version of pciutils and we don't want custom
764 installations to interfere with the default ones.
766 * Makefile: Removed a couple of ancient install hacks: we no longer
767 try to avoid overwriting a newer pci.ids file (users are now expected
768 to use update-ids) and we don't try to remove /etc/pci.ids (a long time
769 has passed since the last version which used it).
771 * Makefile: Paths to pci.ids in man pages automatically get the right path.
773 * Added the update-ids utility.
775 * lib: Removed partially implemented "syscall" access method which will
776 probably never be needed.
778 2002-12-27 Martin Mares <mj@ucw.cz>
780 * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.
782 * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
783 discontiguous numbering of functions. This is already present in the Linux
784 kernel for several years, but I forgot to update pciutils as well.
786 2002-12-26 Martin Mares <mj@ucw.cz>
788 * lib/header.h, lspci.c: Dump AGP3 flags and speeds.
790 * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
791 there is no reason to prefer the kernel version.
793 * lib/proc.c (proc_scan): Don't forget to initialize hdrtype.
795 * Added preliminary version of NetBSD support by Quentin Garnier
796 <netbsd@quatriemek.com>.
798 2002-04-06 Martin Mares <mj@ucw.cz>
800 * lspci.c: Mention "-xxx" in the help.
802 2002-03-30 Martin Mares <mj@ucw.cz>
804 * Released as 2.1.10.
806 * Removed pci.ids from the CVS as they are now maintained separately.
807 They are still included in the tarball, but if you are building pciutils
808 from CVS sources or you want to get a newer ID file than the one distributed,
809 just use "make update-ids" to download the most recent snapshot from
812 * Makefile, README: Updated accordingly.
814 * Makefile: Added a couple of maintenance targets.
816 * maint/*: Maintainer's utilities now reside here (present only in CVS,
819 * lib/names.c (parse_name_list): End-of-line comments are no longer
820 supported. Hashes are now perfectly valid in all names and they start
821 a comment only at the start of the line.
823 2002-03-26 Martin Mares <mj@ucw.cz>
827 * Makefile: When the currently installed pci.ids file is newer than
828 the version to be installed, don't overwrite it. Suggested by
829 Jean Delvare <khali@linux-fr.org>.
831 2002-03-24 Martin Mares <mj@ucw.cz>
833 * lspci.c (show_pcix_bridge): Added PCI-X capability display.
834 Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
836 * lib/header.h: Added PCI-X stuff. Again by Jeff.
838 * Makefile (CFLAGS): -Werror is gone.
840 * lspci.c (format_agp_rate): Fixed AGP rate reporting.
842 * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
845 * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
846 or device hexadecimally, don't confuse it with chip vendor/device ID.
847 First reported by Marc Boucher <marc@mbsi.ca>.
849 2001-11-04 Martin Mares <mj@ucw.cz>
853 * pci.ids: Synced with the PCI ID Repository at SourceForge
854 (http://pciids.sourceforge.net/).
856 2000-08-25 Martin Mares <mj@albireo.ucw.cz>
858 * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
860 2000-06-13 Martin Mares <mj@albireo.ucw.cz>
862 * Makefile (uninstall): Fixed.
864 * pci.ids: ID updates.
866 2000-05-20 Martin Mares <mj@albireo.ucw.cz>
870 * pci.ids: ID updates.
872 * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
874 2000-05-04 Martin Mares <mj@albireo.ucw.cz>
876 * lspci.c (show_verbose): If the header type doesn't match device
877 class, just print a warning and still use the header type, assuming
880 2000-05-01 Martin Mares <mj@albireo.ucw.cz>
882 * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
884 * pci.ids: Updated Contemporary Control ARCnet card entries.
886 * pci.ids: Synchronized class list with latest PCI SIG documents.
888 2000-04-29 Martin Mares <mj@albireo.ucw.cz>
890 * lib/names.c (pci_lookup_name): Fixed the cheat.
892 * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
894 * pci.ids: Various ID updates.
896 2000-04-21 Martin Mares <mj@albireo.ucw.cz>
900 * pciutils.spec: Added German description.
902 * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
903 are the same as device ID and just output subsystem name according to
906 * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
908 * lib/pci.h: Added the correct typedefs for AIX.
910 * lib/generic.c (pci_generic_scan_bus): Export.
912 * lib/configure: Detect AIX. Use "echo '...\c'" instead of
913 "echo -n" if the shell isn't bash.
915 * lspci.c: Avoid using alloca() if not compiled by GCC.
916 (insert_dev): Avoid returning a void value.
918 * Makefile: Choose which install utility to use according to
919 OS type. Also use `-o' instead of `-or' in find arguments.
920 Part of the AIX port.
922 * lib/aix-device.c: Added AIX low-level interface. Contributed
923 by Dave Johnson <ddj@brown.edu>, thanks a lot!
925 * pci.ids: Few new ID's.
927 * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
928 when not compiled by GCC.
930 2000-04-17 Martin Mares <mj@albireo.ucw.cz>
934 * pci.ids: Added a large batch of ID's contributed by Gunther
935 Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
936 list with the 2.3.99pre6 kernel.
938 Thu Mar 9 13:11:39 2000 Martin Mares <mj@albireo.ucw.cz>
940 * lib/example.c: Added a simple example of how to use
943 * lspci.man, setpci.man: Revealed --version. Well spotted
946 * pci.ids: Added lots of new ID's and synced with 2.3.50.
948 Tue Feb 15 00:16:21 2000 Martin Mares <mj@albireo.ucw.cz>
952 * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
953 %{_mandir} to find the right location to install manual pages to.
957 * setpci.c (main): Don't crash when `-s' or `-d' is given with
960 Mon Jan 24 20:04:11 2000 Andreas Jaeger <aj@suse.de>
962 * lib/i386-ports.c: Include <asm/io.h> only on systems without
965 Mon Jan 24 11:24:43 2000 Martin Mares <mj@albireo.ucw.cz>
967 * Makefile: Modified to work with the Linux FHS brain-damaged idea
968 of putting man pages to /usr/share/man. Now we choose either /usr/man
969 or /usr/share/man depending on which one exists.
971 Sun Jan 23 10:52:34 2000 Martin Mares <mj@albireo.ucw.cz>
973 * pci.ids: Synced with Linux 2.3.40.
975 * Released as version 2.1.4.
977 Thu Jan 20 11:08:32 2000 Martin Mares <mj@albireo.ucw.cz>
979 * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
981 * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
983 * lspci.c (format_agp_rate): Better formatting of AGP rates.
987 * lib/configure: Added configuration for ia64 (the same as for Alpha).
988 Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
990 Thu Jan 13 23:01:52 2000 Martin Mares <mj@albireo.ucw.cz>
992 * Released as version 2.1.3.
996 * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
998 * lib/access.c: Corrected order of access methods -- it's wonderful how
999 long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
1001 Sat Dec 11 23:34:48 1999 Martin Mares <mj@albireo.ucw.cz>
1003 * Released as version 2.1.2.
1005 * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
1007 Sat Dec 4 13:11:03 1999 Martin Mares <mj@albireo.ucw.cz>
1009 * Released as version 2.1.1.
1011 * pci.ids: Several new ID's.
1013 * setpci.c (exec_op): Don't forget to increment address after writing
1014 single value, so that `30.b=12,34,56,78' works as expected. Reported
1015 by Petr Soucek <petr@ryston.cz>.
1017 Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz>
1019 * lspci.c (show_terse): If prog-if is zero, but it's present in the
1022 Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
1024 * Released as version 2.1.
1026 * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
1027 lots of contributed entries.
1029 Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
1031 * pci.ids: Added lots of subsystem definitions.
1033 Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
1035 * setpci.man: Better example.
1037 * lspci.c: Resolve prog-if names.
1039 * lib/names.c: Adapted to new pci.ids syntax.
1041 * pci.ids: Reorganized the pci.ids file. Subsystems are listed
1042 under devices, classes can optionally contain prog-if information.
1043 New ID's, as usually.
1045 Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
1047 * pci.ids: New ID's. As usually.
1049 * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
1050 unless we're vvvery verbose.
1052 Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
1054 * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
1056 Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
1058 * pci.ids: New ID's. Again.
1060 Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
1062 * lspci.c (show_size): Don't show size if it's zero (usually
1063 due to bus-centric mode being enabled).
1065 Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
1067 * lib/pci.h: Types are OS dependent.
1069 * lib/internal.h: Byte order hacks are OS dependent.
1071 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
1073 * lib/Makefile, lib/access.c: Added fbsd-device target.
1075 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
1076 incorrectly set to device ID.
1078 * README: Added a note that we support FreeBSD.
1080 * Makefile (PREFIX, ROOT): Set it depending on the OS.
1081 (%.8): Grrr, BSD date is not able to convert date formats the same way
1082 as GNU date does. Use sed instead.
1083 (install): Use `-c' when calling install.
1085 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
1086 by Jari Kirma <kirma@cs.hut.fi>.
1088 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
1089 and pwrite only when we are certain it's safe (i.e., glibc 2.1
1090 on all architectures or any libc on a i386 where we really know
1091 how to use syscalls directly). In all other cases, emulate it
1092 with lseek/read/write.
1094 * pci.ids: Some more IDs.
1096 Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
1098 * pci.ids: Added IDs of parallel port controller cards as sent
1099 by Tim Waugh <tim@cyberelk.demon.co.uk>.
1101 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
1103 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
1105 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
1108 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
1109 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
1110 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
1111 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
1114 * lspci.c (show_msi): Added dumping of the MSI capability.
1115 (show_slotid): The same for SlotID capability.
1116 (show_caps): Seperated capability dumping, because it should
1117 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
1118 layout of htype2, so I'm a bit unsure about it wrt capabilities
1119 -- they at least have to live somewhere else since address 0x34
1120 is already defined differently in htype2.
1122 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
1123 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
1124 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
1126 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
1127 (required by the PCI 2.2 specs).
1129 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
1131 * lspci.c (show_size): Added new function for dumping of region sizes.
1132 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
1135 * lib/pci.h (struct pci_dev): known_fields moved to the public part
1138 * Added support for region sizes. Needs support in the kernel, because
1139 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
1140 now returns a bitmask of what fields were really read.
1142 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
1145 Added `uninstall' target - removes all traces of pciutils.
1147 - Lots of cleanups in the ATI, S3, Adaptec vendors.
1148 - Changed Compaq QVision 1280/p definitions, as it's not possible
1149 to determine the revision from the device ID.
1150 - Same for the Tseng ET4000.
1151 The id's said I had a rev C, when it was actually a rev B.
1152 - Removed some unnecessary strings
1153 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
1154 `Ethernet card'. This should be determined from config space.
1155 - Lots of other new vendors & devices
1156 - Other additional small cleanups.
1158 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
1160 * lib/names.c (pci_lookup_name): When device ID lookup
1161 fails, return hexadecimal device ID instead of vendor ID.
1162 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
1163 I've just extended the fix to subsystem ID's.
1165 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
1167 * lspci.c (show_agp): Bug fix from Petr Vandrovec
1168 <vandrove@vc.cvut.cz>. The command register was displayed
1171 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
1173 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
1174 numbers if not supplied by the libc.
1176 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
1178 * Released the whole package as version 2.0.
1180 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
1182 * pci.ids: Added several new ID's contributed by people
1183 on the linux-pci list.
1185 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
1187 * lspci.c: Display I/O addresses correctly on sparc64.
1188 * lib/header.h: Ditto.
1190 * lib/configure: On sparc set HAVE_64BIT* as well, we want
1191 a binary which works on both 32bit and 64bit SPARCs.
1193 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
1195 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
1198 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
1200 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
1202 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
1203 as a multi-function device, because several single-function devices
1204 don't decode the function bits at all.
1206 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
1208 * Makefile (install): Don't use "-o root -g root" for installation
1209 since it breaks on machines where programs are not installed by root.
1210 Reported by Richard Gooch <rgooch@atnf.csiro.au>
1212 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
1214 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
1216 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
1217 or 64-bit depending on CPU.
1219 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
1220 according to bus address width.
1222 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
1224 * Released as 1.99.4.
1226 * lspci.c: Capability list parser now recognizes both AGP
1227 registers and PCI Power Management registers (the latter
1228 is mainly guesswork based on DEC/Intel 21153 bridge specs
1229 since I don't have the PCI Power Management document).
1231 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
1234 * lspci.c: Added bridge checks to bus mapping code.
1236 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
1238 * lspci.c: Implemented bus mapping mode (-M).
1240 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
1241 (show): Split to show() and show_device().
1243 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
1244 set it to the real access method afterwards.
1246 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
1248 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
1249 don't check PCI_COMMAND for I/O and memory enables.
1251 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
1253 * Makefile: Added target `release' which substitutes new version
1254 number to .spec, .lsm and README. Also rewrote target `dist'.
1256 * Released as 1.99.3.
1258 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
1260 * lib/header.h: Until kernel adopts new layout of PCI
1261 includes (i.e., separate declaration of header structure,
1262 functions and device IDs), which is not going to happen
1263 before 2.3, we'll use our own definiton of the header.
1265 * lspci.c (show_verbose): Display `Cap' flag in device status.
1267 * lspci.c (show_htype0): Display capability lists whereever
1268 available. The only capability name we recognize now is `AGP'.
1269 Unfortunately, capabilities are stored in device-dependent
1270 portion of the configuration space and are thus available
1271 only to root unless you read a dump.
1273 * lspci.c (scan_devices): Use cache instead of buffering.
1275 * lib/buffer.c: Removed (obsoleted by the cache).
1277 * lib/access.c: Added general caching mechanism.
1279 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
1281 * pci.ids: Added few devices.
1283 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
1285 * Version string is now defined in top-level Makefile, exported
1286 to the configure script and also substituted to man pages.
1288 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
1289 (show_verbose): Rewrote interrupt display logic.
1291 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
1293 * lib/configure: Rewrote detection of Linux versions. Now it
1294 works on 2.0 kernels (only with direct/dump access, of course).
1296 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
1299 * lib/proc.c (proc_read, proc_write): Distinguish between short
1300 read/write and real errors.
1302 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
1303 libpci respects buscentric mode automatically.
1305 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
1306 bytes of header (the whole standard part).
1308 * common.c: pcilib options are now all uppercase. Also moved
1309 PCI access debugging option here.
1311 * Released as 1.99.2.
1313 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
1315 * Wrote configure script and rewrote Makefiles.
1317 * Removed few unused variables.
1319 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
1321 * common.c: Moved several functions used in both setpci and lspci
1322 here. This includes parsing of libpci-related options.
1324 * More library tweaks.
1326 * filter.c, names.c: Moved to library.
1328 * setpci: Rewritten to use the library.
1330 * Released as 1.99.1.
1332 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
1334 * lspci.c (scan_devices): For cardbus bridges, read first 128
1335 bytes of config space to get full standard header.
1337 * Makefile (CFLAGS): Removed "-Wno-unused".
1339 * Started the "New Generation" branch and introduced the
1342 * lspci: Rewritten to use the library.
1344 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
1346 * Released as version 1.10.
1348 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
1350 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
1351 Dag Wieers <dag@digibel.be>.
1353 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
1355 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
1357 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
1359 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
1361 * Released as version 1.09.
1363 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
1365 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
1366 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
1368 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
1370 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
1372 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
1374 * Released as version 1.08.
1376 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
1378 * lspci.8: Changed warning about lspci -xxx.
1380 * lspci.c: Require "-xxx" for full configuration space dump, so that
1381 it's impossible to crash the machine by single typo.
1383 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
1385 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
1387 * lspci.c (show_bases): Better displaying of unassigned and
1388 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
1391 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
1393 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
1394 (thanks to Geert Uytterhoeven for finding this out)
1396 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
1398 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
1399 (show_machine): Print subsystem ID.
1401 * names.c: New name resolution engine supporting subsystem IDs.
1403 * Released as version 1.07.
1405 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
1407 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
1408 (show_bases): Honor the `cnt' argument.
1409 (grow_tree): Parse CardBus headers in tree mode as well.
1411 * pci.h: Updated CardBus header field description. I still don't
1412 have the CardBus standard available, but OZ6832 specs contain
1413 full description of all header fields supported by the chip.
1415 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
1419 * names.c (parse_name_list): Killed an unused variable.
1421 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
1422 if they are not defined by glibc (needed for glibc built on older
1425 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
1427 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
1431 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
1432 should be gone. Again thanks to Steve for bug report.
1434 * filter.c (filter_parse_slot): Fixed ":x" type filters.
1436 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
1437 <steve@icarus.com> for reporting this.
1439 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
1441 * lspci.c (main), setpci.c (main): Implemented "--version".
1445 * pciutils.h (PCIUTILS_VERSION): Added version string.
1447 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
1448 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
1451 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
1453 * pci.ids: More updates from Jens Maurer.
1455 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
1457 * pci.ids: Updates from Jens Maurer.
1459 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
1463 * setpci.8: Written.
1465 * setpci.c: Finished.
1467 * lspci.c: Now able to fetch expansion ROM base from kernel device list
1468 and print it if not in buscentric mode.
1470 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
1474 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
1476 * lspci.8: Updated the documentation.
1478 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
1480 * filter.c: Introduced new generic device filter.
1482 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
1484 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
1485 of PCI-to-PCI bridges in the tree format.
1487 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
1489 * lspci.c (show_machine): Added non-verbose mode of machine-readable
1492 * pci.ids: Updates from Jens Maurer.
1494 * Released as version 1.02.
1496 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
1498 * lspci.c: Added a "-m" switch for dumping machine-readable
1499 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
1501 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
1503 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
1504 if available. This should avoid all problems with official kernel
1505 not synchronized to newer PCI code in CVS -- standard distribution
1506 of pciutils now contains pci.h from current CVS kernel, pciutils
1507 in CVS contain no pci.h and use the correct kernel include.
1509 * Makefile: Fixed installation path for man pages.
1511 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
1515 * lspci.8: Created a man page.
1517 * Releasing as version 1.0.
1519 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
1521 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
1522 to all the C sources. This should eliminate problems with 32-bit compilers
1525 * lspci.c (show_verbose): Recognize CardBus bridge header type.
1526 (show_htype2): Stub routine.
1527 (scan_config): Write sensible error message if the kernel denies reading of
1528 upper part of the PCI config space.