1 2007-11-06 Martin Mares <mj@ucw.cz>
5 * lspci.c: Added a new switch `-k' which requests printing
6 of information on kernel drivers attached to each device
7 and on kernel modules reporting the ability to handle the
8 device. So far, this is supported only on Linux with the
9 sysfs back-end, so it is implemented internally in the lspci
10 instead of the libpci. Thanks to Anicka <anicka@anicka.net>
13 2007-10-19 Martin Mares <mj@ucw.cz>
15 * Makefile, lib/Makefile: Moved -lz from LDFLAGS to LDLIBS.
16 Also added an explicit pattern rule for linking to make sure
17 that LDLIBS is used on all platforms. Thanks to Dan Nicholson
20 2007-10-19 Martin Mares <mj@ucw.cz>
24 * pci.ids: Revised class codes to match Conventional PCI 3.0 specs.
25 Added a couple of new ones, renumbered `ADMA continuous operation'
26 prog-if to 0x30 (even the old SATA Class Code ECN doesn't mention
27 0x40) and renumbered the satellite communication controllers.
29 * lib/header.h: Include `PCI hot-plug' and `Secure device'
30 capabilities from PCI 3.0 specs. Also added `SATA HBA' and
31 `Advanced features' caps from various ECN's.
33 * lspci.c: All known capabilities have at least their name displayed
34 now. When we are unable to decode them completely, we signalize it
37 * lspci.man: Document `<?>' and also mention that extended config
38 space is currently available only with the linux_sysfs back-end.
40 * lspci.c: Decode the Debug port capability (per EHCI 0.96 spec).
42 * lspci.c: Big code cleanup: re-arranged functions in the code,
43 renamed everything related to capabilities to cap_* and
44 all options except verbose to opt_*.
46 2007-10-14 Martin Mares <mj@ucw.cz>
48 * lib/[fno]bsd-*: Removed extraneous braces.
50 2007-10-12 Martin Mares <mj@ucw.cz>
52 * Capability loop detection introduced 2.2.7 did not work
53 properly with extended capabilities. Fixed.
55 2007-10-05 Martin Mares <mj@ucw.cz>
59 * lspci.c (show_caps, show_ext_caps): Detect and report loops in
62 * lspci.c, lib/header.h: Finished decoding of the PCI Express
63 capability. The extended capabilities remain undecoded for now,
64 but at least the list of them has been updated to reflect the
65 current PCI Express 2.0 spec.
67 * lspci.c, lib/header.h: Decode new bits of traditional registers
68 as defined by PCIE / PCI-X. This includes discard timers in the bridge
69 control register and INTx enable/status in device control/status
72 * lib/fbsd-device.c: Support domains on new FreeBSD's. Contributed
75 2007-09-12 Hasso Tepper <hasso@estpak.ee>
77 * Extended the fbsd-device backend to run on Dragonfly BSD.
79 * lspci.c: alloca() is declared in <stdlib.h> on BSD's, not <alloca.h>.
81 2007-09-03 Martin Mares <mj@ucw.cz>
83 * Resurrected the Windows port, including cross-compilation by MinGW.
84 Patch by Samuel Bronson <naesten@gmail.com>.
86 2007-08-31 Martin Mares <mj@ucw.cz>
88 * Makefile, lib/Makefile: `ar' and `ranlib' can be overriden to allow
91 2007-08-27 Martin Mares <mj@ucw.cz>
93 * lib/names.c (pci_open): When calling gzopen(), use "rb" file mode
94 instead of "r". This is needed on DOS systems, where this function
95 somewhat illogically uses the binary flag for the compressed file
96 instead of the decompressed stream inside, where binariness really
99 2007-08-14 Martin Mares <mj@ucw.cz>
101 * lspci.c (show_ht): Added decoding of Hypertransport MSI mapping capability,
102 based on a patch by Jason Gunthorpe.
104 * tests/cap-MSI-mapping: Added a test case. I plan to add test cases
105 (which are dumps of config space) for all new features.
107 2007-06-20 Martin Mares <mj@ucw.cz>
111 * Makefile: Added an "install-lib" target. Thanks to Dan Nicholson
114 * Makefile, lib/Makefile: Generate and install pkg-config file
115 for libpci. Again by Dan Nicholson.
117 2007-06-20 Thomas Schwinge <tschwinge@gnu.org>
119 * lib/i386-io-hurd.h: Rewritten for new Hurd kernels.
121 2007-05-04 Martin Mares <mj@ucw.cz>
125 * pci.ids: Updated to the current snapshot of the database.
127 2007-02-14 Martin Mares <mj@ucw.cz>
129 * lspci.c (show_express): Added PCI/PCI-X to PCI-Express Bridge type.
130 Patch by Mark Glines.
132 2007-02-09 Martin Mares <mj@ucw.cz>
134 * pci.ids: Updated to the current snapshot of the database.
136 2007-02-06 Martin Mares <mj@ucw.cz>
138 * Replaced bzero() by memset() everywhere, it's better to lose a tiny
139 bit of readability than maintain hacks to make it work on various systems.
141 * lib/configure: tr on Solaris is a bit weird and it requires `[A-Z]'
142 instead of `A-Z'. Fortunately, the extra brackets don't hurt otherwise.
144 * lib/types.h, lib/configure: Solaris should use <stdint.h> to get precise
147 2007-02-04 Martin Mares <mj@ucw.cz>
149 * lspci.c: alloca() needs <alloca.h>.
151 2006-09-17 Martin Mares <mj@ucw.cz>
153 * lib/dump.c: Fixed a couple of bugs in the dump backend which caused
154 devices with domains or with extended config space to be read incorrectly.
155 Also, dumps with partial lines are allowed now.
157 2006-09-10 Martin Mares <mj@ucw.cz>
159 * pci.ids: Updated to the current database snapshot.
161 * lspci.c (scan_device): If an error occurs when reading the standard config
162 header of a device, report it and ignore the device and return with exit
165 2006-09-09 Martin Mares <mj@ucw.cz>
169 * maint/release: Remind the maintainer about the current PCI_LIB_VERSION.
171 * lib/pci.h: Updated PCI_LIB_VERSION.
173 * lspci.c (show_machine): In the `-m' mode, do proper shell escaping
174 if the fields printed contain quotes or backslashes.
176 * lspci.c (show_machine): Added a `-vmm' mode, which removes the misuse
177 of the `Device' tag for two different purposes.
179 * Makefile: Moved all system-dependent decisions to lib/configure,
180 since config.mk is included in the top-level Makefile anyway.
182 * lib/configure: When configuring for Linux, ignore the kernel version
183 and always build all access methods.
185 * Makefile (CFLAGS): Removed -Winline, it's not needed and triggers
186 at many non-interesting places with gcc 3.4.
188 * Whitespace cleanup of all source files.
190 * The pci.ids file can be stored compressed if zlib is available.
191 Added transparent decompression to lib/names.c, modified update-pciids.sh
192 to keep the file compressed if applicable, updated Makefiles.
193 Based on a patch by Matthew Wilcox, but all the bugs are mine.
195 * Makefile, README: Allow installation to be done to a different directory
196 from the one we will eventually be placed in by setting DESTDIR.
197 Patch by Matthew Wilcox.
199 * Added .gitignore files.
201 * Makefile (clean): Clean *.orig, too.
203 * Cleaned up usage of `char' and `byte'.
205 * lib/header.h: PCI_CLASS_DOCKING_OTHER should be 0x0a80, not 0x0a01.
207 * lib/header.h: Added PCI_CLASS_xxx constants for all classes currently
208 defined in the pci.ids file.
210 2006-08-01 Martin Mares <mj@ucw.cz>
212 * lib/i386-io-hurd.h: Fixed a silly typo.
214 2006-07-30 Martin Mares <mj@ucw.cz>
216 * lib/Makefile: Added a missing rule for obsd-device.o.
218 * lspci.c, lib/header.h: Added support for MSI per-vector masking.
219 Contributed by Petr Vandrovec.
221 * lspci.c, lib/header.h: Added support for the `bridge subsystem ID'
222 capability. Contributed by Petr Vandrovec.
224 * lspci.c (show_htype1): Fixed bug in printing of 64-bit prefetchable
225 memory windows. Fix by Petr Vandrovec.
227 * maint/release.pm: Exclude .git directory from releases.
229 * lib/i386-ports.c, lib/i386-io-*: Report failures during port access
230 initialization by a->warn() instead of calling printf() or perror()
233 * lib/i386-ports.c, lib/i386-io-*: Moved the logic which keeps track of
234 the port access state to generic code.
236 * lib/i386-io-hurd.h: Ask the kernel for I/O port access appropriately.
237 Contributed by Thomas Schwinge and Samuel Thibault.
239 * lib/i386-ports.c: Define _GNU_SOURCE, it's needed by the Hurd module.
241 * lib/header.h: Whitespace cleanups.
243 * lib/i386-io-windows.h: Fixed indentation and spelling.
245 * README.Windows: Mention that WinIO.dll is needed and where to get it.
247 2006-06-27 Martin Mares <mj@ucw.cz>
249 * lib/Makefile, Makefile: Added rules for building and cleaning the example.
251 * lib/example.c: Show how to use PCI_FILL_CLASS and used another register
252 for demonstrating the config space accesses. The example is still very
255 * lib/pci.h, lib/generic.c: Added PCI_FILL_CLASS.
257 * lib/sysfs.c: Fetch device ID and class from sysfs, because they can
258 be modified by kernel fixups.
260 * lspci.c: Use PCI_FILL_CLASS. Thanks to Matthew Willcox for the patch.
262 2006-06-03 Martin Mares <mj@ucw.cz>
264 * lspci.c: Introduced the -nn switch. Thanks to David N. Welton
267 * lib/names.c (pci_lookup_name): Introduced PCI_LOOKUP_MIXED and
268 cleaned up the name selection code.
270 * lib/names.c (pci_lookup_name): If PCI_LOOKUP_NO_NUMBERS is given,
271 pci_access->numeric_ids is ignored.
273 * lib/names.c (pci_lookup_name): When class is identified and
274 subclass isn't, display class name and subclass number.
276 2006-05-31 Martin Mares <mj@ucw.cz>
278 * setpci.c (main): Don't crash when an invalid width is specified.
280 * lspci.c, setpci.c, common.c: die() now uses the right program
281 name when printing an error message.
283 2006-05-19 Martin Mares <mj@ucw.cz>
285 * README: Mention the public GIT tree.
287 * README: Updated the list of ports.
289 2006-05-10 Martin Mares <mj@ucw.cz>
291 * lib/configure, lib/fbsd-device.c: Added support for GNU/kFreeBSD.
292 Thanks to Petr Salinger for the patch.
294 2006-05-05 Martin Mares <mj@ucw.cz>
298 * lspci.c (scan_device): The -D switch didn't work as intended
301 2006-05-05 Martin Mares <mj@ucw.cz>
305 * pci.ids: Updated to the current database snapshot.
307 * lib/obsd-device.c (and other files in lib/*): Added OpenBSD
308 interface by Matthieu Herrb <matthieu.herrb@laas.fr>, based on
309 the existing FreeBSD interface.
311 * Moved pciutils to a GIT repository, which now contains merged
312 history from both CVS and Arch. Good bye, TLA!
314 2006-03-21 Martin Mares <mj@ucw.cz>
316 * lspci.c (show_slot_name): Avoid the previous changes in default
317 display of domain name when in machine-readable mode. However, `-D'
318 forces domain display even there.
320 * lspci.man: Added a warning on -m being the only format, which is
321 guaranteed to be stable between lspci versions.
323 2006-03-13 Martin Mares <mj@ucw.cz>
325 * lspci.man: Documented the -D switch.
327 * lspci.c (show_slot_name, scan_device): If there are multiple PCI
328 domains or if the `-D' switch is used, show the domain number for
331 * lspci.c (show_verbose): Report cache line size in bytes.
333 * update-pciids.sh: Use curl if available. Patch by Matthew Wilcox.
335 2006-01-04 Martin Mares <mj@ucw.cz>
337 * lspci.c (show_express_link): Fixed decoding of link status register.
338 Thanks to Roland Dreier for his report.
340 2005-12-12 Martin Mares <mj@ucw.cz>
342 * lib/nbsd-libpci.c: If libpci is used by an ordinary user, allow
343 at least read-only access. Patch by Pavel Celeda <celeda@liberouter.org>.
345 * Makefile: Corrected library path on NetBSD.
347 2005-11-26 Martin Mares <mj@ucw.cz>
351 * lspci.c (show_machine): Subsystem vendors were printed incorrectly
352 in machine-readable modes. Thanks to Pavel Celeda for a bug report.
354 2005-10-11 Martin Mares <mj@ucw.cz>
356 * lspci.c (new_bus): Fixed a memory leak. Thanks to Paul Sangree for reporting it.
358 2005-09-21 Martin Mares <mj@ucw.cz>
362 * pci.ids: Updated copyright header.
364 * lib/sysfs.c (sysfs_get_resources): Removed warning about unsupported
365 64-bit addresses, they are now always supported.
367 * lspci.c (show_bases): Corrected printing of 64-bit addresses
370 * lib/configure: Enable 64-bit addresses on all Linux systems.
372 * lib/types.h: Don't pad 64-bit addresses to 16 xigits, only to 8 if they
375 2005-09-11 Martin Mares <mj@ucw.cz>
377 * Released as 2.1.99-test11.
379 * lspci.c: Removed unnecessary trailing zeros in pci_lookup_name() calls.
381 2005-09-10 Martin Mares <mj@ucw.cz>
383 * Released as 2.1.99-test10.
385 * pci.ids: Synchronized with the current database snapshot.
387 * update-pciids.sh: Changed the default URL for downloading pci.ids
388 to http://pciids.sourceforge.net/v2.2/pci.ids.
390 * lib/pci.h (PCI_LIB_VERSION): Added version identifier.
392 * lib/names.c: Rewritten the name database module almost from scratch.
393 Everything is much cleaner and there are hopefully no more memory leaks;
394 pci_lookup_name() now uses varargs in a backward compatible fashion.
395 Introduced PCI_LOOKUP_NO_NUMBERS.
397 The new code supports subsystem entries not tied to a specific device.
398 I had to extend the format of pci.ids in order to support it, so I have
399 extended the idea of the "C" (class) blocks and introduced "S" blocks
400 for subsystems. To avoid doing more incompatible changes in the future,
401 the parser skips unknown single-letter blocks without reporting errors.
403 2005-08-23 Martin Mares <mj@ucw.cz>
405 * Released as 2.1.99-test9.
407 * Makefile (OPT): Removed -fomit-frame-pointer, it's default in recent
408 gcc versions when optimizing anyway.
410 * Made the path to pci.ids customizable and independent on the SHAREDIR.
411 Just override IDSDIR in the top-level Makefile.
413 * pci.ids: Synchronized with the current database snapshot.
415 * lspci.man, setpci.man: Improved the man pages. Documented all access
416 methods and which operations are privileged.
418 * lspci.c: Another rewrite of config register caching, now also including
419 lots of internal checks. It should be now perfectly able to cope with
420 portions of the configuration space being inaccessible, for example
421 due to insufficient access rights.
423 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Cleaned up dumping of PCI-X
424 capabilities. Includes partial support for PCI-X 2.0 (probably incomplete
425 as I haven't seen the spec).
427 * lspci.c: Quell warnings about unused parameters.
429 * lspci.c: Removed C++ comments.
431 * lib/header.h: Merged definitions of extended capabilities and some new
432 PCI-X capability bits from linux-2.6.11/include/pci.h.
434 * lspci.c (show_caps): Try to scan extended capabilities only if the
435 device has either PCI-X or PCI Express capability in its normal capability
438 * lib/dump.c (dump_init): Reading of dumps works again. The dump reader
439 now also remembers how much data it has read and refuses attempts to
440 access more than that.
442 * setpci.man, lspci.c, README: prefer spelling "buses" over "busses".
444 * lspci.c: If alloca() is not available, use xmalloc(), not malloc().
446 * lib/configure: Added x86_64 on Linux.
448 2005-08-22 Martin Mares <mj@ucw.cz>
450 * lib/filter.c (pci_filter_parse_slot): Fixed parsing of domain filters.
451 Thanks to Matthew Wilcox for bug report.
453 * lspci.c: Corrected spelling of "Hz" (it was "hz" at several places).
454 Thanks to Krzysztof Oledzki for pointing that out.
456 2004-08-19 Martin Mares <mj@ucw.cz>
458 * pciutils.spec (%attr): Setting attributes for /sbin/* is an anachronism,
459 because pciutils by default install to /usr/sbin. Update.
461 2004-08-13 Martin Mares <mj@ucw.cz>
463 * Released as 2.1.99-test8.
465 * lib/types.h, lib/pci.h, lib/sysdep.h: `byte' and `word' are
466 no longer exported to the outside world.
468 * README.Windows: Updated.
470 * maint/release: Substitute version number in win32/config.h.
472 * win32/config.h: Added.
474 * lib/sysdep.h (bzero, strcasecmp): are macros on Windows.
476 * compat/getopt.[ch]: Added copies of getopt.[ch] from the GNU
477 C library for use on systems where the default libraries lack
478 proper getopt. Currently used by the Windows port.
480 * lib/sysdep.h, lib/types.h: Updates of the Windows port from
483 * lib/types.h: If PCI_HAVE_Uxx_TYPES is defined, libpci doesn't define
484 its own u8, u16, u32, byte and word types and uses what the user
485 has supplied instead. With this change, all namespace clashes should
488 * Makefile, lib/Makefile: Updated dependencies.
490 * pciutils.h: Include lib/sysdep.h and move NONRET et al. there.
492 * lib/sysdep.h: No need to include <sys/types.h> on FreeBSD, because
493 it is included unconditionally in lib/types.h.
495 * Moved system-dependent stuff from lib/internal.h to lib/sysdep.h,
496 which is also used by the utilities. Also moved type declarations
497 from lib/pci.h to lib/types.h.
499 * All files: Prepend a "PCI_" prefix in front of all configuration
500 defines to avoid namespace clashes. CAVEAT: If there is any libpci
501 application using the (undocumented) defines, it has to be updated.
503 * lib/Makefile: Killed HAVE_OWN_HEADER_H, since we stopped sharing
504 headers with the kernel a couple of years ago.
506 * lib/sysfs.c (sysfs_get_resources): We have 7 resources, not 6.
508 * lspci.c (show_rom): Use the same logic for printing disabled
509 or unassigned ROM's as we do in show_bases() for the other BAR's.
511 * lib/generic.c (pci_generic_fill_info): Better reaction to
512 invalid 64-bit addresses. Also d->hdrtype should not include
513 bit 7, which caused mysterious errors on multi-function devices.
515 * lib/generic.c (pci_generic_fill_info): Fill in base addresses
516 even if the regions are known to be disabled. It is the client's
517 job to interpret them. (And it is not a trivial job if you want
518 to do it correctly, since you need to check I/O and memory enables
519 on all upstream bridges, too.) However, it could be interesting to
520 introduce functions for interpreting the addresses and even for
521 mapping the regions and doing I/O on them.
523 2004-07-30 Martin Mares <mj@ucw.cz>
525 * lspci.c: HyperTransport improvements from Maciej.
527 2004-07-11 Martin Mares <mj@ucw.cz>
529 * lib/sysfs.c (sysfs_get_resources): Arguments now correspond
530 to the format string. [Patch by Bill Nottingham]
532 2004-07-05 Martin Mares <mj@ucw.cz>
534 * Released as 2.1.99-test7.
536 * lspci.c (config_fetch): Wanted to merge Matthew's bug fix, but
537 ended up with rewriting the fetching mechanism to be fully dynamic,
538 but avoid reading config space registers not explicitly requested.
540 2004-06-29 Matthew Wilcox <willy@debian.org>
542 * lspci.c: More work on PCI Express dumping.
544 * lib/header.h: Updated PCI Express capability definitions.
546 * lib/proc.c (proc_read): Removed bogus warning.
548 * common.c (xrealloc): Introduced.
550 * lspci.man: Added -xxxx.
552 2004-06-27 Martin Mares <mj@ucw.cz>
554 * Released as 2.1.99-test6.
556 * lspci.c (show_msix), lib/header.h: Added dumping of MSI-X cap.
557 Patch by Roland Dreier <roland@topspin.com>, cleaned up by me.
559 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Handle config_fetch()
562 * lib/header.h: Added PCI Express extended capabilities. Again by Matthew.
564 * lspci.c (show_express): Added dumping of PCI Express cap.
565 Patch by Matthew Wilcox.
567 * lib/header.h: Added a list of PCI 3.0 capabilities and also details
568 on PCI Express caps. Patch by Matthew Wilcox <willy@debian.org>.
570 * lspci.c (check_root): Gone. No explicit checks for root are needed,
571 report correct errors reported by the libpci instead.
573 * lspci.c: Added dumping of the extended config space on "-xxxx".
574 Better caching of config registers.
576 * setpci.c (main): Allow access to whole 4096 bytes of the config space.
578 * lib/sysfs.c, lib/proc.c: Don't print error messages on short reads,
579 just return the appropriate error code.
581 * lib: Added support for extended (4096-byte) configuration space,
582 currently implemented only in Linux proc and sysfs access methods
583 and of course in the dump reader.
585 2004-05-29 Martin Mares <mj@ucw.cz>
587 * Released as 2.1.99-test5.
589 * lib/pci.h: Windows don't have the standard u_int* types.
591 * lib/internal.h: <sys/param.h> required on Windows for endianity
594 * lib/i386-ports.c: Connected i386-io-windows.h.
596 * lspci.c (check_root): geteuid() is not available on Windows.
598 * lib/i386-io-windows.h: Added Windows port contributed by Alexander
599 Stock <stock.alexander@gmx.de>.
601 * lib/configure: Hopefully fixed SunOS port broken by various
602 changes to the configure script.
604 * Makefile, lib/configure: Cross-compilation support, patch by Maciej.
606 2004-05-28 Martin Mares <mj@ucw.cz>
608 * Released as 2.1.99-test4.
610 * lspci.c (show_verbose): Header type 1 is probably legal for all
611 types of bridges, not only for PCI-to-PCI bridges.
613 * lspci.c (format_agp_rate): Write "x16", not "x@".
614 (show_agp): rate[] could overflow.
615 Bugs reported by Jakub Bogusz <qboosh@pld-linux.org>.
617 * lspci.c (show_ht_*): Show HyperTransport capability with all its
618 details. Once again code by Maciej simplified (i.e., possibly broken)
621 * lib/header.h: Added declarations of HyperTransport capability.
622 Again thanks to Maciej.
624 * lspci.c: Decode all bits of the secondary status word in type 1 headers.
625 Thanks to Maciej W. Rozycki <macro@ds2.pg.gda.pl> for the patch.
627 2003-12-27 Martin Mares <mj@ucw.cz>
629 * Released as 2.1.99-test3.
631 * lspci.man, setpci.man: Document domains and correct spelling.
633 * lib/dump.c (dump_init): Added ability to read domain numbers.
635 * lspci.c: Devices in domains different from 0 have their slot number
636 printed as "<domain>:<bus>:<slot>.<func>". Tree view supports domains
639 * lib/filter.c: Slot filters understand domains.
641 * lib/generic.c: Mention the domain in slot numbers in all error messages.
643 * lib/internal.h: The #ifdef for Linux <asm/byteorder.h> was wrong.
645 * lib/access.c (pci_get_dev): Added support for domains.
647 * lib/sysfs.c (sysfs_scan): Read vendor and device ID from the config
648 registers (or to be precise, leave it for the generic parts of the pcilib
649 to do so) instead of reading them from the sysfs. It's faster this way.
651 * lspci.c (show_pcix): Don't touch pci_dev->hdrtype, it's an internal
652 variable. Better read it from the config registers (it's cached anyway).
654 * lib/sysfs.c (sysfs_scan), lib/proc.c (proc_scan): Don't read the hdrtype.
655 lib/generic.c (pci_generic_fill_info): If hdrtype is -1 (unset), read it.
656 Saves lots of unnecessary file accesses.
658 * lib/pci.h (PCIADDR_PORT_FMT): Use %llx instead of %Lx, because the latter
659 is not supported by all C libraries.
661 * Makefile: Always enter the lib directory (remember that we don't have
662 full dependecies for the library in the top-level Makefile; hmmm, another
663 thing to rewrite some day).
665 * lib/sysfs.c: Added Linux sysfs access method based on the patch
666 written by Matthew Wilcox <willy@fc.hp.com>.
668 * lib/proc.c: Renamed the access method name from "/proc/bus/pci" to "Linux-proc".
670 * lib/pread.h: The hacks to support pread on various versions
671 of Linux libc moved there.
673 * lib/proc.c (proc_setup): The return value of snprintf() varies
674 between glibc versions, so we need to check both for a negative
675 values and for too large values.
677 * Removed last few references to the "Linux PCI Utilities", the
678 package is pretty cross-platform now :)
680 2003-12-27 Martin Mares <mj@ucw.cz>
682 * Released as 2.1.99-test2.
684 * README, pciutils.lsm, pciutils.spec: Use @VERSION@ to make the
685 release scripts insert the current version. "make release" is gone.
687 * maint/release, maint/release.pm: Added a new system of scripts for
688 making releases including inter-version diffs etc.
690 * Makefile: Cleaned up.
692 * lib/fbsd-device.c: I patched another copy of this file by mistake,
693 this time the version checks should be right.
695 2003-12-27 Martin Mares <mj@ucw.cz>
697 * Released as 2.1.99-test1.
699 * pciutils.h, common.c, lspci.man, setpci.man, lib/internal.h:
700 Remove shadows of the syscall access method which was never
703 * update-pciids.sh: Try to preserve permissions of the old file
704 if chmod supports --reference. Should close Debian Bug #223740.
706 * lib/proc.c (proc_setup): Increased path name length limit to 1024.
707 Thanks for Redhat and Mandrake for inspiration.
709 * lib/configure: Recognize ppc and ppc64, both have 64-bit addresses.
710 Grabbed from Redhat (Fedora) patches.
712 2003-12-27 Martin Mares <mj@ucw.cz>
714 Merged bug fixes from Debian patches:
716 * lspci.c (show_verbose): "Cache Line Size" should be capitalized.
718 * lspci.c (show_pcix_nobridge): Added a missing newline.
720 * lib/proc.c (proc_scan): When reading the header type, don't
721 forget to clear the topmost bit indicating that the device has
724 2003-12-27 Martin Mares <mj@ucw.cz>
726 Updated the FreeBSD port. Thanks to Samy Al Bahra <samy@kerneled.com>
729 * lib/Makefile: Add ${FREEBSD_SYS} to the include path if it's defined.
730 * lib/fbsd-device.c: Select the right set of system includes according
731 to __FreeBSD_version.
733 2003-12-27 Martin Mares <mj@ucw.cz>
735 Merged support for Solaris on i386 by Bill Moore <billm@eng.sun.com>
738 * lib/configure: Recognize SunOS.
739 * lib/internal.h: Learn how to recognize byte order on SunOS.
740 * lib/i386-ports.c: Split OS-dependent I/O port access from i386-ports.c.
741 * lib/i386-io-linux.h: Linux specific part.
742 * lib/i386-io-hurd.h: GNU/Hurd specific part.
743 * lib/i386-io-sunos.h: SunOS specific part.
745 2003-12-26 Martin Mares <mj@ucw.cz>
747 * lib/header.h (PCI_*_MASK): Cast to pciaddr_t explicitly.
749 * lib/pci.h: Types declared in <sys/types.h> should be usable on all
750 platforms we currently support, so kill the forest of #ifdef's and
751 use them in all cases.
753 * lib/pci.h: Use ULONG_MASK to decide whether we should use long
754 or long long to represent a 64-bit address. Killed HAVE_LONG_ADDRESS.
755 Define format strings for addresses, port numbers and IRQ numbers
758 * lib/proc.c (proc_scan): Use PCIADDR_T_FMT for scanf'ing addresses.
760 2003-12-26 Marco Gerards <metgerards@student.han.nl>
762 Added support for the GNU Hurd (cleaned up by Martin Mares):
764 * lib/configure [GNU]: Use the i386 ports for configuration access.
765 * lib/i386-ports.c: Don't call iopl() on the Hurd.
766 * lib/pci.h [OS_GNU]: Include <sys/types.h> and use it for defining
769 2003-12-26 Martin Mares <mj@ucw.cz>
771 * lspci.c (show_pcix_bridge, show_pcix_nobridge): Don't forget to call
772 config_fetch() to ensure that the registers have been read. Thanks to
773 Bill Wood <bill.wood@hp.com> for the patch.
775 * lspci.c: Ensure that failure of config_fetch() is handled correctly
778 * lspci.man: There was one more explicit reference to /usr/share/pci.ids.
779 Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <macro@ds2.pg.gda.pl>.
781 * setpci.c (main): Better error messages.
783 * setpci.c (ex_op): The demo mode should disable only writing, not reading.
785 * setpci.man: The documentation was inconsistent on what should -D do.
786 Document the new behaviour.
788 * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
789 the GCC specific __attribute__((noreturn)) and killed the hack with
790 redefining __attribute__ on non-GCC compilers.
792 * Makefile: Added missing dependencies. Parallel builds work now.
793 Problem reported by Andreas Haumer <andreas@xss.co.at>, but I chose
796 * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
797 command every time $(MANDIR) is referenced.
799 * lspci.c (main): The error message for `lspci -s' incorrectly mentioned
800 a `-f' switch. Reported by Steve Finney <Steve.Finney@SpirentCom.COM>.
802 * lib/generic.c: Removed memory leak in pci_generic_bus_scan().
803 Reported by Gary Parnes <gary_parnes@terago.com>.
805 * Replaced obsolete syntax of __attribute__((unused)) in the middle of
806 parameter declarations (which is no longer supported by GCC 3.1) by the
807 current syntax (attribute at the end). Thanks to pixel@mandrakesoft.com
808 for reporting this problem.
810 * Removed CVS $Id$ tags from all files.
812 * Makefile: Added some more warnings.
814 * setpci.c: Cleaned up mask/value code.
816 2003-12-08 Thayne Harbaugh <tharbaugh@lnxi.com>
818 * setpci.c: Individual bits to be set can be specified as <value>:<mask>.
820 2003-11-29 Martin Mares <mj@ucw.cz>
822 * Imported the pciutils sources to my Arch repository. Good-bye, CVS.
824 2003-01-04 Martin Mares <mj@ucw.cz>
826 * Released as 2.1.11.
828 * Makefile: Changed configuration of installation directories --
829 all paths are now set at the top of the Makefile instead of being
830 scattered between the installation rules. The default installation
831 now goes always to /usr/local regardless of the OS as most distributions
832 already contain some version of pciutils and we don't want custom
833 installations to interfere with the default ones.
835 * Makefile: Removed a couple of ancient install hacks: we no longer
836 try to avoid overwriting a newer pci.ids file (users are now expected
837 to use update-ids) and we don't try to remove /etc/pci.ids (a long time
838 has passed since the last version which used it).
840 * Makefile: Paths to pci.ids in man pages automatically get the right path.
842 * Added the update-ids utility.
844 * lib: Removed partially implemented "syscall" access method which will
845 probably never be needed.
847 2002-12-27 Martin Mares <mj@ucw.cz>
849 * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.
851 * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
852 discontiguous numbering of functions. This is already present in the Linux
853 kernel for several years, but I forgot to update pciutils as well.
855 2002-12-26 Martin Mares <mj@ucw.cz>
857 * lib/header.h, lspci.c: Dump AGP3 flags and speeds.
859 * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
860 there is no reason to prefer the kernel version.
862 * lib/proc.c (proc_scan): Don't forget to initialize hdrtype.
864 * Added preliminary version of NetBSD support by Quentin Garnier
865 <netbsd@quatriemek.com>.
867 2002-04-06 Martin Mares <mj@ucw.cz>
869 * lspci.c: Mention "-xxx" in the help.
871 2002-03-30 Martin Mares <mj@ucw.cz>
873 * Released as 2.1.10.
875 * Removed pci.ids from the CVS as they are now maintained separately.
876 They are still included in the tarball, but if you are building pciutils
877 from CVS sources or you want to get a newer ID file than the one distributed,
878 just use "make update-ids" to download the most recent snapshot from
881 * Makefile, README: Updated accordingly.
883 * Makefile: Added a couple of maintenance targets.
885 * maint/*: Maintainer's utilities now reside here (present only in CVS,
888 * lib/names.c (parse_name_list): End-of-line comments are no longer
889 supported. Hashes are now perfectly valid in all names and they start
890 a comment only at the start of the line.
892 2002-03-26 Martin Mares <mj@ucw.cz>
896 * Makefile: When the currently installed pci.ids file is newer than
897 the version to be installed, don't overwrite it. Suggested by
898 Jean Delvare <khali@linux-fr.org>.
900 2002-03-24 Martin Mares <mj@ucw.cz>
902 * lspci.c (show_pcix_bridge): Added PCI-X capability display.
903 Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
905 * lib/header.h: Added PCI-X stuff. Again by Jeff.
907 * Makefile (CFLAGS): -Werror is gone.
909 * lspci.c (format_agp_rate): Fixed AGP rate reporting.
911 * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
914 * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
915 or device hexadecimally, don't confuse it with chip vendor/device ID.
916 First reported by Marc Boucher <marc@mbsi.ca>.
918 2001-11-04 Martin Mares <mj@ucw.cz>
922 * pci.ids: Synced with the PCI ID Repository at SourceForge
923 (http://pciids.sourceforge.net/).
925 2000-08-25 Martin Mares <mj@albireo.ucw.cz>
927 * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
929 2000-06-13 Martin Mares <mj@albireo.ucw.cz>
931 * Makefile (uninstall): Fixed.
933 * pci.ids: ID updates.
935 2000-05-20 Martin Mares <mj@albireo.ucw.cz>
939 * pci.ids: ID updates.
941 * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
943 2000-05-04 Martin Mares <mj@albireo.ucw.cz>
945 * lspci.c (show_verbose): If the header type doesn't match device
946 class, just print a warning and still use the header type, assuming
949 2000-05-01 Martin Mares <mj@albireo.ucw.cz>
951 * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
953 * pci.ids: Updated Contemporary Control ARCnet card entries.
955 * pci.ids: Synchronized class list with latest PCI SIG documents.
957 2000-04-29 Martin Mares <mj@albireo.ucw.cz>
959 * lib/names.c (pci_lookup_name): Fixed the cheat.
961 * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
963 * pci.ids: Various ID updates.
965 2000-04-21 Martin Mares <mj@albireo.ucw.cz>
969 * pciutils.spec: Added German description.
971 * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
972 are the same as device ID and just output subsystem name according to
975 * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
977 * lib/pci.h: Added the correct typedefs for AIX.
979 * lib/generic.c (pci_generic_scan_bus): Export.
981 * lib/configure: Detect AIX. Use "echo '...\c'" instead of
982 "echo -n" if the shell isn't bash.
984 * lspci.c: Avoid using alloca() if not compiled by GCC.
985 (insert_dev): Avoid returning a void value.
987 * Makefile: Choose which install utility to use according to
988 OS type. Also use `-o' instead of `-or' in find arguments.
989 Part of the AIX port.
991 * lib/aix-device.c: Added AIX low-level interface. Contributed
992 by Dave Johnson <ddj@brown.edu>, thanks a lot!
994 * pci.ids: Few new ID's.
996 * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
997 when not compiled by GCC.
999 2000-04-17 Martin Mares <mj@albireo.ucw.cz>
1001 * Released as 2.1.6.
1003 * pci.ids: Added a large batch of ID's contributed by Gunther
1004 Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
1005 list with the 2.3.99pre6 kernel.
1007 Thu Mar 9 13:11:39 2000 Martin Mares <mj@albireo.ucw.cz>
1009 * lib/example.c: Added a simple example of how to use
1012 * lspci.man, setpci.man: Revealed --version. Well spotted
1015 * pci.ids: Added lots of new ID's and synced with 2.3.50.
1017 Tue Feb 15 00:16:21 2000 Martin Mares <mj@albireo.ucw.cz>
1019 * Released as 2.1.5.
1021 * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
1022 %{_mandir} to find the right location to install manual pages to.
1024 * pci.ids: New ID's.
1026 * setpci.c (main): Don't crash when `-s' or `-d' is given with
1029 Mon Jan 24 20:04:11 2000 Andreas Jaeger <aj@suse.de>
1031 * lib/i386-ports.c: Include <asm/io.h> only on systems without
1034 Mon Jan 24 11:24:43 2000 Martin Mares <mj@albireo.ucw.cz>
1036 * Makefile: Modified to work with the Linux FHS brain-damaged idea
1037 of putting man pages to /usr/share/man. Now we choose either /usr/man
1038 or /usr/share/man depending on which one exists.
1040 Sun Jan 23 10:52:34 2000 Martin Mares <mj@albireo.ucw.cz>
1042 * pci.ids: Synced with Linux 2.3.40.
1044 * Released as version 2.1.4.
1046 Thu Jan 20 11:08:32 2000 Martin Mares <mj@albireo.ucw.cz>
1048 * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
1050 * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
1052 * lspci.c (format_agp_rate): Better formatting of AGP rates.
1054 * pci.ids: New ID's.
1056 * lib/configure: Added configuration for ia64 (the same as for Alpha).
1057 Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
1059 Thu Jan 13 23:01:52 2000 Martin Mares <mj@albireo.ucw.cz>
1061 * Released as version 2.1.3.
1063 * pci.ids: New ID's.
1065 * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
1067 * lib/access.c: Corrected order of access methods -- it's wonderful how
1068 long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
1070 Sat Dec 11 23:34:48 1999 Martin Mares <mj@albireo.ucw.cz>
1072 * Released as version 2.1.2.
1074 * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
1076 Sat Dec 4 13:11:03 1999 Martin Mares <mj@albireo.ucw.cz>
1078 * Released as version 2.1.1.
1080 * pci.ids: Several new ID's.
1082 * setpci.c (exec_op): Don't forget to increment address after writing
1083 single value, so that `30.b=12,34,56,78' works as expected. Reported
1084 by Petr Soucek <petr@ryston.cz>.
1086 Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz>
1088 * lspci.c (show_terse): If prog-if is zero, but it's present in the
1091 Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
1093 * Released as version 2.1.
1095 * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
1096 lots of contributed entries.
1098 Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
1100 * pci.ids: Added lots of subsystem definitions.
1102 Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
1104 * setpci.man: Better example.
1106 * lspci.c: Resolve prog-if names.
1108 * lib/names.c: Adapted to new pci.ids syntax.
1110 * pci.ids: Reorganized the pci.ids file. Subsystems are listed
1111 under devices, classes can optionally contain prog-if information.
1112 New ID's, as usually.
1114 Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
1116 * pci.ids: New ID's. As usually.
1118 * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
1119 unless we're vvvery verbose.
1121 Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
1123 * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
1125 Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
1127 * pci.ids: New ID's. Again.
1129 Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
1131 * lspci.c (show_size): Don't show size if it's zero (usually
1132 due to bus-centric mode being enabled).
1134 Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
1136 * lib/pci.h: Types are OS dependent.
1138 * lib/internal.h: Byte order hacks are OS dependent.
1140 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
1142 * lib/Makefile, lib/access.c: Added fbsd-device target.
1144 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
1145 incorrectly set to device ID.
1147 * README: Added a note that we support FreeBSD.
1149 * Makefile (PREFIX, ROOT): Set it depending on the OS.
1150 (%.8): Grrr, BSD date is not able to convert date formats the same way
1151 as GNU date does. Use sed instead.
1152 (install): Use `-c' when calling install.
1154 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
1155 by Jari Kirma <kirma@cs.hut.fi>.
1157 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
1158 and pwrite only when we are certain it's safe (i.e., glibc 2.1
1159 on all architectures or any libc on a i386 where we really know
1160 how to use syscalls directly). In all other cases, emulate it
1161 with lseek/read/write.
1163 * pci.ids: Some more IDs.
1165 Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
1167 * pci.ids: Added IDs of parallel port controller cards as sent
1168 by Tim Waugh <tim@cyberelk.demon.co.uk>.
1170 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
1172 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
1174 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
1177 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
1178 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
1179 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
1180 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
1183 * lspci.c (show_msi): Added dumping of the MSI capability.
1184 (show_slotid): The same for SlotID capability.
1185 (show_caps): Seperated capability dumping, because it should
1186 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
1187 layout of htype2, so I'm a bit unsure about it wrt capabilities
1188 -- they at least have to live somewhere else since address 0x34
1189 is already defined differently in htype2.
1191 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
1192 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
1193 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
1195 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
1196 (required by the PCI 2.2 specs).
1198 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
1200 * lspci.c (show_size): Added new function for dumping of region sizes.
1201 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
1204 * lib/pci.h (struct pci_dev): known_fields moved to the public part
1207 * Added support for region sizes. Needs support in the kernel, because
1208 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
1209 now returns a bitmask of what fields were really read.
1211 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
1214 Added `uninstall' target - removes all traces of pciutils.
1216 - Lots of cleanups in the ATI, S3, Adaptec vendors.
1217 - Changed Compaq QVision 1280/p definitions, as it's not possible
1218 to determine the revision from the device ID.
1219 - Same for the Tseng ET4000.
1220 The id's said I had a rev C, when it was actually a rev B.
1221 - Removed some unnecessary strings
1222 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
1223 `Ethernet card'. This should be determined from config space.
1224 - Lots of other new vendors & devices
1225 - Other additional small cleanups.
1227 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
1229 * lib/names.c (pci_lookup_name): When device ID lookup
1230 fails, return hexadecimal device ID instead of vendor ID.
1231 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
1232 I've just extended the fix to subsystem ID's.
1234 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
1236 * lspci.c (show_agp): Bug fix from Petr Vandrovec
1237 <vandrove@vc.cvut.cz>. The command register was displayed
1240 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
1242 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
1243 numbers if not supplied by the libc.
1245 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
1247 * Released the whole package as version 2.0.
1249 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
1251 * pci.ids: Added several new ID's contributed by people
1252 on the linux-pci list.
1254 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
1256 * lspci.c: Display I/O addresses correctly on sparc64.
1257 * lib/header.h: Ditto.
1259 * lib/configure: On sparc set HAVE_64BIT* as well, we want
1260 a binary which works on both 32bit and 64bit SPARCs.
1262 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
1264 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
1267 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
1269 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
1271 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
1272 as a multi-function device, because several single-function devices
1273 don't decode the function bits at all.
1275 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
1277 * Makefile (install): Don't use "-o root -g root" for installation
1278 since it breaks on machines where programs are not installed by root.
1279 Reported by Richard Gooch <rgooch@atnf.csiro.au>
1281 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
1283 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
1285 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
1286 or 64-bit depending on CPU.
1288 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
1289 according to bus address width.
1291 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
1293 * Released as 1.99.4.
1295 * lspci.c: Capability list parser now recognizes both AGP
1296 registers and PCI Power Management registers (the latter
1297 is mainly guesswork based on DEC/Intel 21153 bridge specs
1298 since I don't have the PCI Power Management document).
1300 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
1303 * lspci.c: Added bridge checks to bus mapping code.
1305 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
1307 * lspci.c: Implemented bus mapping mode (-M).
1309 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
1310 (show): Split to show() and show_device().
1312 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
1313 set it to the real access method afterwards.
1315 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
1317 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
1318 don't check PCI_COMMAND for I/O and memory enables.
1320 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
1322 * Makefile: Added target `release' which substitutes new version
1323 number to .spec, .lsm and README. Also rewrote target `dist'.
1325 * Released as 1.99.3.
1327 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
1329 * lib/header.h: Until kernel adopts new layout of PCI
1330 includes (i.e., separate declaration of header structure,
1331 functions and device IDs), which is not going to happen
1332 before 2.3, we'll use our own definiton of the header.
1334 * lspci.c (show_verbose): Display `Cap' flag in device status.
1336 * lspci.c (show_htype0): Display capability lists whereever
1337 available. The only capability name we recognize now is `AGP'.
1338 Unfortunately, capabilities are stored in device-dependent
1339 portion of the configuration space and are thus available
1340 only to root unless you read a dump.
1342 * lspci.c (scan_devices): Use cache instead of buffering.
1344 * lib/buffer.c: Removed (obsoleted by the cache).
1346 * lib/access.c: Added general caching mechanism.
1348 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
1350 * pci.ids: Added few devices.
1352 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
1354 * Version string is now defined in top-level Makefile, exported
1355 to the configure script and also substituted to man pages.
1357 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
1358 (show_verbose): Rewrote interrupt display logic.
1360 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
1362 * lib/configure: Rewrote detection of Linux versions. Now it
1363 works on 2.0 kernels (only with direct/dump access, of course).
1365 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
1368 * lib/proc.c (proc_read, proc_write): Distinguish between short
1369 read/write and real errors.
1371 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
1372 libpci respects buscentric mode automatically.
1374 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
1375 bytes of header (the whole standard part).
1377 * common.c: pcilib options are now all uppercase. Also moved
1378 PCI access debugging option here.
1380 * Released as 1.99.2.
1382 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
1384 * Wrote configure script and rewrote Makefiles.
1386 * Removed few unused variables.
1388 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
1390 * common.c: Moved several functions used in both setpci and lspci
1391 here. This includes parsing of libpci-related options.
1393 * More library tweaks.
1395 * filter.c, names.c: Moved to library.
1397 * setpci: Rewritten to use the library.
1399 * Released as 1.99.1.
1401 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
1403 * lspci.c (scan_devices): For cardbus bridges, read first 128
1404 bytes of config space to get full standard header.
1406 * Makefile (CFLAGS): Removed "-Wno-unused".
1408 * Started the "New Generation" branch and introduced the
1411 * lspci: Rewritten to use the library.
1413 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
1415 * Released as version 1.10.
1417 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
1419 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
1420 Dag Wieers <dag@digibel.be>.
1422 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
1424 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
1426 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
1428 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
1430 * Released as version 1.09.
1432 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
1434 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
1435 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
1437 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
1439 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
1441 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
1443 * Released as version 1.08.
1445 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
1447 * lspci.8: Changed warning about lspci -xxx.
1449 * lspci.c: Require "-xxx" for full configuration space dump, so that
1450 it's impossible to crash the machine by single typo.
1452 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
1454 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
1456 * lspci.c (show_bases): Better displaying of unassigned and
1457 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
1460 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
1462 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
1463 (thanks to Geert Uytterhoeven for finding this out)
1465 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
1467 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
1468 (show_machine): Print subsystem ID.
1470 * names.c: New name resolution engine supporting subsystem IDs.
1472 * Released as version 1.07.
1474 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
1476 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
1477 (show_bases): Honor the `cnt' argument.
1478 (grow_tree): Parse CardBus headers in tree mode as well.
1480 * pci.h: Updated CardBus header field description. I still don't
1481 have the CardBus standard available, but OZ6832 specs contain
1482 full description of all header fields supported by the chip.
1484 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
1488 * names.c (parse_name_list): Killed an unused variable.
1490 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
1491 if they are not defined by glibc (needed for glibc built on older
1494 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
1496 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
1500 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
1501 should be gone. Again thanks to Steve for bug report.
1503 * filter.c (filter_parse_slot): Fixed ":x" type filters.
1505 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
1506 <steve@icarus.com> for reporting this.
1508 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
1510 * lspci.c (main), setpci.c (main): Implemented "--version".
1514 * pciutils.h (PCIUTILS_VERSION): Added version string.
1516 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
1517 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
1520 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
1522 * pci.ids: More updates from Jens Maurer.
1524 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
1526 * pci.ids: Updates from Jens Maurer.
1528 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
1532 * setpci.8: Written.
1534 * setpci.c: Finished.
1536 * lspci.c: Now able to fetch expansion ROM base from kernel device list
1537 and print it if not in buscentric mode.
1539 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
1543 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
1545 * lspci.8: Updated the documentation.
1547 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
1549 * filter.c: Introduced new generic device filter.
1551 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
1553 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
1554 of PCI-to-PCI bridges in the tree format.
1556 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
1558 * lspci.c (show_machine): Added non-verbose mode of machine-readable
1561 * pci.ids: Updates from Jens Maurer.
1563 * Released as version 1.02.
1565 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
1567 * lspci.c: Added a "-m" switch for dumping machine-readable
1568 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
1570 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
1572 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
1573 if available. This should avoid all problems with official kernel
1574 not synchronized to newer PCI code in CVS -- standard distribution
1575 of pciutils now contains pci.h from current CVS kernel, pciutils
1576 in CVS contain no pci.h and use the correct kernel include.
1578 * Makefile: Fixed installation path for man pages.
1580 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
1584 * lspci.8: Created a man page.
1586 * Releasing as version 1.0.
1588 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
1590 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
1591 to all the C sources. This should eliminate problems with 32-bit compilers
1594 * lspci.c (show_verbose): Recognize CardBus bridge header type.
1595 (show_htype2): Stub routine.
1596 (scan_config): Write sensible error message if the kernel denies reading of
1597 upper part of the PCI config space.