1 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
3 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
4 as a multi-function device, because several single-function devices
5 don't decode the function bits at all.
7 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
9 * Makefile (install): Don't use "-o root -g root" for installation
10 since it breaks on machines where programs are not installed by root.
11 Reported by Richard Gooch <rgooch@atnf.csiro.au>
13 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
15 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
17 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
18 or 64-bit depending on CPU.
20 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
21 according to bus address width.
23 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
27 * lspci.c: Capability list parser now recognizes both AGP
28 registers and PCI Power Management registers (the latter
29 is mainly guesswork based on DEC/Intel 21153 bridge specs
30 since I don't have the PCI Power Management document).
32 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
35 * lspci.c: Added bridge checks to bus mapping code.
37 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
39 * lspci.c: Implemented bus mapping mode (-M).
41 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
42 (show): Split to show() and show_device().
44 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
45 set it to the real access method afterwards.
47 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
49 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
50 don't check PCI_COMMAND for I/O and memory enables.
52 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
54 * Makefile: Added target `release' which substitutes new version
55 number to .spec, .lsm and README. Also rewrote target `dist'.
59 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
61 * lib/header.h: Until kernel adopts new layout of PCI
62 includes (i.e., separate declaration of header structure,
63 functions and device IDs), which is not going to happen
64 before 2.3, we'll use our own definiton of the header.
66 * lspci.c (show_verbose): Display `Cap' flag in device status.
68 * lspci.c (show_htype0): Display capability lists whereever
69 available. The only capability name we recognize now is `AGP'.
70 Unfortunately, capabilities are stored in device-dependent
71 portion of the configuration space and are thus available
72 only to root unless you read a dump.
74 * lspci.c (scan_devices): Use cache instead of buffering.
76 * lib/buffer.c: Removed (obsoleted by the cache).
78 * lib/access.c: Added general caching mechanism.
80 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
82 * pci.ids: Added few devices.
84 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
86 * Version string is now defined in top-level Makefile, exported
87 to the configure script and also substituted to man pages.
89 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
90 (show_verbose): Rewrote interrupt display logic.
92 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
94 * lib/configure: Rewrote detection of Linux versions. Now it
95 works on 2.0 kernels (only with direct/dump access, of course).
97 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
100 * lib/proc.c (proc_read, proc_write): Distinguish between short
101 read/write and real errors.
103 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
104 libpci respects buscentric mode automatically.
106 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
107 bytes of header (the whole standard part).
109 * common.c: pcilib options are now all uppercase. Also moved
110 PCI access debugging option here.
112 * Released as 1.99.2.
114 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
116 * Wrote configure script and rewrote Makefiles.
118 * Removed few unused variables.
120 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
122 * common.c: Moved several functions used in both setpci and lspci
123 here. This includes parsing of libpci-related options.
125 * More library tweaks.
127 * filter.c, names.c: Moved to library.
129 * setpci: Rewritten to use the library.
131 * Released as 1.99.1.
133 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
135 * lspci.c (scan_devices): For cardbus bridges, read first 128
136 bytes of config space to get full standard header.
138 * Makefile (CFLAGS): Removed "-Wno-unused".
140 * Started the "New Generation" branch and introduced the
143 * lspci: Rewritten to use the library.
145 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
147 * Released as version 1.10.
149 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
151 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
152 Dag Wieers <dag@digibel.be>.
154 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
156 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
158 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
160 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
162 * Released as version 1.09.
164 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
166 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
167 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
169 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
171 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
173 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
175 * Released as version 1.08.
177 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
179 * lspci.8: Changed warning about lspci -xxx.
181 * lspci.c: Require "-xxx" for full configuration space dump, so that
182 it's impossible to crash the machine by single typo.
184 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
186 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
188 * lspci.c (show_bases): Better displaying of unassigned and
189 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
192 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
194 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
195 (thanks to Geert Uytterhoeven for finding this out)
197 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
199 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
200 (show_machine): Print subsystem ID.
202 * names.c: New name resolution engine supporting subsystem IDs.
204 * Released as version 1.07.
206 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
208 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
209 (show_bases): Honor the `cnt' argument.
210 (grow_tree): Parse CardBus headers in tree mode as well.
212 * pci.h: Updated CardBus header field description. I still don't
213 have the CardBus standard available, but OZ6832 specs contain
214 full description of all header fields supported by the chip.
216 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
220 * names.c (parse_name_list): Killed an unused variable.
222 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
223 if they are not defined by glibc (needed for glibc built on older
226 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
228 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
232 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
233 should be gone. Again thanks to Steve for bug report.
235 * filter.c (filter_parse_slot): Fixed ":x" type filters.
237 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
238 <steve@icarus.com> for reporting this.
240 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
242 * lspci.c (main), setpci.c (main): Implemented "--version".
246 * pciutils.h (PCIUTILS_VERSION): Added version string.
248 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
249 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
252 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
254 * pci.ids: More updates from Jens Maurer.
256 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
258 * pci.ids: Updates from Jens Maurer.
260 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
266 * setpci.c: Finished.
268 * lspci.c: Now able to fetch expansion ROM base from kernel device list
269 and print it if not in buscentric mode.
271 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
275 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
277 * lspci.8: Updated the documentation.
279 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
281 * filter.c: Introduced new generic device filter.
283 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
285 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
286 of PCI-to-PCI bridges in the tree format.
288 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
290 * lspci.c (show_machine): Added non-verbose mode of machine-readable
293 * pci.ids: Updates from Jens Maurer.
295 * Released as version 1.02.
297 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
299 * lspci.c: Added a "-m" switch for dumping machine-readable
300 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
302 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
304 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
305 if available. This should avoid all problems with official kernel
306 not synchronized to newer PCI code in CVS -- standard distribution
307 of pciutils now contains pci.h from current CVS kernel, pciutils
308 in CVS contain no pci.h and use the correct kernel include.
310 * Makefile: Fixed installation path for man pages.
312 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
316 * lspci.8: Created a man page.
318 * Releasing as version 1.0.
320 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
322 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
323 to all the C sources. This should eliminate problems with 32-bit compilers
326 * lspci.c (show_verbose): Recognize CardBus bridge header type.
327 (show_htype2): Stub routine.
328 (scan_config): Write sensible error message if the kernel denies reading of
329 upper part of the PCI config space.