1 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
3 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
5 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
8 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
9 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
10 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
11 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
14 * lspci.c (show_msi): Added dumping of the MSI capability.
15 (show_slotid): The same for SlotID capability.
16 (show_caps): Seperated capability dumping, because it should
17 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
18 layout of htype2, so I'm a bit unsure about it wrt capabilities
19 -- they at least have to live somewhere else since address 0x34
20 is already defined differently in htype2.
22 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
23 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
24 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
26 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
27 (required by the PCI 2.2 specs).
29 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
31 * lspci.c (show_size): Added new function for dumping of region sizes.
32 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
35 * lib/pci.h (struct pci_dev): known_fields moved to the public part
38 * Added support for region sizes. Needs support in the kernel, because
39 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
40 now returns a bitmask of what fields were really read.
42 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
45 Added `uninstall' target - removes all traces of pciutils.
47 - Lots of cleanups in the ATI, S3, Adaptec vendors.
48 - Changed Compaq QVision 1280/p definitions, as it's not possible
49 to determine the revision from the device ID.
50 - Same for the Tseng ET4000.
51 The id's said I had a rev C, when it was actually a rev B.
52 - Removed some unnecessary strings
53 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
54 `Ethernet card'. This should be determined from config space.
55 - Lots of other new vendors & devices
56 - Other additional small cleanups.
58 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
60 * lib/names.c (pci_lookup_name): When device ID lookup
61 fails, return hexadecimal device ID instead of vendor ID.
62 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
63 I've just extended the fix to subsystem ID's.
65 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
67 * lspci.c (show_agp): Bug fix from Petr Vandrovec
68 <vandrove@vc.cvut.cz>. The command register was displayed
71 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
73 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
74 numbers if not supplied by the libc.
76 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
78 * Released the whole package as version 2.0.
80 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
82 * pci.ids: Added several new ID's contributed by people
83 on the linux-pci list.
85 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
87 * lspci.c: Display I/O addresses correctly on sparc64.
88 * lib/header.h: Ditto.
90 * lib/configure: On sparc set HAVE_64BIT* as well, we want
91 a binary which works on both 32bit and 64bit SPARCs.
93 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
95 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
98 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
100 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
102 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
103 as a multi-function device, because several single-function devices
104 don't decode the function bits at all.
106 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
108 * Makefile (install): Don't use "-o root -g root" for installation
109 since it breaks on machines where programs are not installed by root.
110 Reported by Richard Gooch <rgooch@atnf.csiro.au>
112 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
114 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
116 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
117 or 64-bit depending on CPU.
119 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
120 according to bus address width.
122 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
124 * Released as 1.99.4.
126 * lspci.c: Capability list parser now recognizes both AGP
127 registers and PCI Power Management registers (the latter
128 is mainly guesswork based on DEC/Intel 21153 bridge specs
129 since I don't have the PCI Power Management document).
131 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
134 * lspci.c: Added bridge checks to bus mapping code.
136 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
138 * lspci.c: Implemented bus mapping mode (-M).
140 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
141 (show): Split to show() and show_device().
143 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
144 set it to the real access method afterwards.
146 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
148 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
149 don't check PCI_COMMAND for I/O and memory enables.
151 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
153 * Makefile: Added target `release' which substitutes new version
154 number to .spec, .lsm and README. Also rewrote target `dist'.
156 * Released as 1.99.3.
158 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
160 * lib/header.h: Until kernel adopts new layout of PCI
161 includes (i.e., separate declaration of header structure,
162 functions and device IDs), which is not going to happen
163 before 2.3, we'll use our own definiton of the header.
165 * lspci.c (show_verbose): Display `Cap' flag in device status.
167 * lspci.c (show_htype0): Display capability lists whereever
168 available. The only capability name we recognize now is `AGP'.
169 Unfortunately, capabilities are stored in device-dependent
170 portion of the configuration space and are thus available
171 only to root unless you read a dump.
173 * lspci.c (scan_devices): Use cache instead of buffering.
175 * lib/buffer.c: Removed (obsoleted by the cache).
177 * lib/access.c: Added general caching mechanism.
179 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
181 * pci.ids: Added few devices.
183 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
185 * Version string is now defined in top-level Makefile, exported
186 to the configure script and also substituted to man pages.
188 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
189 (show_verbose): Rewrote interrupt display logic.
191 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
193 * lib/configure: Rewrote detection of Linux versions. Now it
194 works on 2.0 kernels (only with direct/dump access, of course).
196 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
199 * lib/proc.c (proc_read, proc_write): Distinguish between short
200 read/write and real errors.
202 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
203 libpci respects buscentric mode automatically.
205 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
206 bytes of header (the whole standard part).
208 * common.c: pcilib options are now all uppercase. Also moved
209 PCI access debugging option here.
211 * Released as 1.99.2.
213 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
215 * Wrote configure script and rewrote Makefiles.
217 * Removed few unused variables.
219 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
221 * common.c: Moved several functions used in both setpci and lspci
222 here. This includes parsing of libpci-related options.
224 * More library tweaks.
226 * filter.c, names.c: Moved to library.
228 * setpci: Rewritten to use the library.
230 * Released as 1.99.1.
232 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
234 * lspci.c (scan_devices): For cardbus bridges, read first 128
235 bytes of config space to get full standard header.
237 * Makefile (CFLAGS): Removed "-Wno-unused".
239 * Started the "New Generation" branch and introduced the
242 * lspci: Rewritten to use the library.
244 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
246 * Released as version 1.10.
248 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
250 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
251 Dag Wieers <dag@digibel.be>.
253 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
255 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
257 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
259 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
261 * Released as version 1.09.
263 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
265 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
266 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
268 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
270 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
272 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
274 * Released as version 1.08.
276 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
278 * lspci.8: Changed warning about lspci -xxx.
280 * lspci.c: Require "-xxx" for full configuration space dump, so that
281 it's impossible to crash the machine by single typo.
283 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
285 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
287 * lspci.c (show_bases): Better displaying of unassigned and
288 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
291 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
293 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
294 (thanks to Geert Uytterhoeven for finding this out)
296 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
298 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
299 (show_machine): Print subsystem ID.
301 * names.c: New name resolution engine supporting subsystem IDs.
303 * Released as version 1.07.
305 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
307 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
308 (show_bases): Honor the `cnt' argument.
309 (grow_tree): Parse CardBus headers in tree mode as well.
311 * pci.h: Updated CardBus header field description. I still don't
312 have the CardBus standard available, but OZ6832 specs contain
313 full description of all header fields supported by the chip.
315 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
319 * names.c (parse_name_list): Killed an unused variable.
321 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
322 if they are not defined by glibc (needed for glibc built on older
325 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
327 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
331 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
332 should be gone. Again thanks to Steve for bug report.
334 * filter.c (filter_parse_slot): Fixed ":x" type filters.
336 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
337 <steve@icarus.com> for reporting this.
339 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
341 * lspci.c (main), setpci.c (main): Implemented "--version".
345 * pciutils.h (PCIUTILS_VERSION): Added version string.
347 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
348 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
351 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
353 * pci.ids: More updates from Jens Maurer.
355 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
357 * pci.ids: Updates from Jens Maurer.
359 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
365 * setpci.c: Finished.
367 * lspci.c: Now able to fetch expansion ROM base from kernel device list
368 and print it if not in buscentric mode.
370 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
374 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
376 * lspci.8: Updated the documentation.
378 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
380 * filter.c: Introduced new generic device filter.
382 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
384 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
385 of PCI-to-PCI bridges in the tree format.
387 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
389 * lspci.c (show_machine): Added non-verbose mode of machine-readable
392 * pci.ids: Updates from Jens Maurer.
394 * Released as version 1.02.
396 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
398 * lspci.c: Added a "-m" switch for dumping machine-readable
399 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
401 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
403 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
404 if available. This should avoid all problems with official kernel
405 not synchronized to newer PCI code in CVS -- standard distribution
406 of pciutils now contains pci.h from current CVS kernel, pciutils
407 in CVS contain no pci.h and use the correct kernel include.
409 * Makefile: Fixed installation path for man pages.
411 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
415 * lspci.8: Created a man page.
417 * Releasing as version 1.0.
419 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
421 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
422 to all the C sources. This should eliminate problems with 32-bit compilers
425 * lspci.c (show_verbose): Recognize CardBus bridge header type.
426 (show_htype2): Stub routine.
427 (scan_config): Write sensible error message if the kernel denies reading of
428 upper part of the PCI config space.