1 2007-10-14 Martin Mares <mj@ucw.cz>
3 * lib/[fno]bsd-*: Removed extraneous braces.
5 2007-10-12 Martin Mares <mj@ucw.cz>
7 * Capability loop detection introduced 2.2.7 did not work
8 properly with extended capabilities. Fixed.
10 2007-10-05 Martin Mares <mj@ucw.cz>
14 * lspci.c (show_caps, show_ext_caps): Detect and report loops in
17 * lspci.c, lib/header.h: Finished decoding of the PCI Express
18 capability. The extended capabilities remain undecoded for now,
19 but at least the list of them has been updated to reflect the
20 current PCI Express 2.0 spec.
22 * lspci.c, lib/header.h: Decode new bits of traditional registers
23 as defined by PCIE / PCI-X. This includes discard timers in the bridge
24 control register and INTx enable/status in device control/status
27 * lib/fbsd-device.c: Support domains on new FreeBSD's. Contributed
30 2007-09-12 Hasso Tepper <hasso@estpak.ee>
32 * Extended the fbsd-device backend to run on Dragonfly BSD.
34 * lspci.c: alloca() is declared in <stdlib.h> on BSD's, not <alloca.h>.
36 2007-09-03 Martin Mares <mj@ucw.cz>
38 * Resurrected the Windows port, including cross-compilation by MinGW.
39 Patch by Samuel Bronson <naesten@gmail.com>.
41 2007-08-31 Martin Mares <mj@ucw.cz>
43 * Makefile, lib/Makefile: `ar' and `ranlib' can be overriden to allow
46 2007-08-27 Martin Mares <mj@ucw.cz>
48 * lib/names.c (pci_open): When calling gzopen(), use "rb" file mode
49 instead of "r". This is needed on DOS systems, where this function
50 somewhat illogically uses the binary flag for the compressed file
51 instead of the decompressed stream inside, where binariness really
54 2007-08-14 Martin Mares <mj@ucw.cz>
56 * lspci.c (show_ht): Added decoding of Hypertransport MSI mapping capability,
57 based on a patch by Jason Gunthorpe.
59 * tests/cap-MSI-mapping: Added a test case. I plan to add test cases
60 (which are dumps of config space) for all new features.
62 2007-06-20 Martin Mares <mj@ucw.cz>
66 * Makefile: Added an "install-lib" target. Thanks to Dan Nicholson
69 * Makefile, lib/Makefile: Generate and install pkg-config file
70 for libpci. Again by Dan Nicholson.
72 2007-06-20 Thomas Schwinge <tschwinge@gnu.org>
74 * lib/i386-io-hurd.h: Rewritten for new Hurd kernels.
76 2007-05-04 Martin Mares <mj@ucw.cz>
80 * pci.ids: Updated to the current snapshot of the database.
82 2007-02-14 Martin Mares <mj@ucw.cz>
84 * lspci.c (show_express): Added PCI/PCI-X to PCI-Express Bridge type.
87 2007-02-09 Martin Mares <mj@ucw.cz>
89 * pci.ids: Updated to the current snapshot of the database.
91 2007-02-06 Martin Mares <mj@ucw.cz>
93 * Replaced bzero() by memset() everywhere, it's better to lose a tiny
94 bit of readability than maintain hacks to make it work on various systems.
96 * lib/configure: tr on Solaris is a bit weird and it requires `[A-Z]'
97 instead of `A-Z'. Fortunately, the extra brackets don't hurt otherwise.
99 * lib/types.h, lib/configure: Solaris should use <stdint.h> to get precise
102 2007-02-04 Martin Mares <mj@ucw.cz>
104 * lspci.c: alloca() needs <alloca.h>.
106 2006-09-17 Martin Mares <mj@ucw.cz>
108 * lib/dump.c: Fixed a couple of bugs in the dump backend which caused
109 devices with domains or with extended config space to be read incorrectly.
110 Also, dumps with partial lines are allowed now.
112 2006-09-10 Martin Mares <mj@ucw.cz>
114 * pci.ids: Updated to the current database snapshot.
116 * lspci.c (scan_device): If an error occurs when reading the standard config
117 header of a device, report it and ignore the device and return with exit
120 2006-09-09 Martin Mares <mj@ucw.cz>
124 * maint/release: Remind the maintainer about the current PCI_LIB_VERSION.
126 * lib/pci.h: Updated PCI_LIB_VERSION.
128 * lspci.c (show_machine): In the `-m' mode, do proper shell escaping
129 if the fields printed contain quotes or backslashes.
131 * lspci.c (show_machine): Added a `-vmm' mode, which removes the misuse
132 of the `Device' tag for two different purposes.
134 * Makefile: Moved all system-dependent decisions to lib/configure,
135 since config.mk is included in the top-level Makefile anyway.
137 * lib/configure: When configuring for Linux, ignore the kernel version
138 and always build all access methods.
140 * Makefile (CFLAGS): Removed -Winline, it's not needed and triggers
141 at many non-interesting places with gcc 3.4.
143 * Whitespace cleanup of all source files.
145 * The pci.ids file can be stored compressed if zlib is available.
146 Added transparent decompression to lib/names.c, modified update-pciids.sh
147 to keep the file compressed if applicable, updated Makefiles.
148 Based on a patch by Matthew Wilcox, but all the bugs are mine.
150 * Makefile, README: Allow installation to be done to a different directory
151 from the one we will eventually be placed in by setting DESTDIR.
152 Patch by Matthew Wilcox.
154 * Added .gitignore files.
156 * Makefile (clean): Clean *.orig, too.
158 * Cleaned up usage of `char' and `byte'.
160 * lib/header.h: PCI_CLASS_DOCKING_OTHER should be 0x0a80, not 0x0a01.
162 * lib/header.h: Added PCI_CLASS_xxx constants for all classes currently
163 defined in the pci.ids file.
165 2006-08-01 Martin Mares <mj@ucw.cz>
167 * lib/i386-io-hurd.h: Fixed a silly typo.
169 2006-07-30 Martin Mares <mj@ucw.cz>
171 * lib/Makefile: Added a missing rule for obsd-device.o.
173 * lspci.c, lib/header.h: Added support for MSI per-vector masking.
174 Contributed by Petr Vandrovec.
176 * lspci.c, lib/header.h: Added support for the `bridge subsystem ID'
177 capability. Contributed by Petr Vandrovec.
179 * lspci.c (show_htype1): Fixed bug in printing of 64-bit prefetchable
180 memory windows. Fix by Petr Vandrovec.
182 * maint/release.pm: Exclude .git directory from releases.
184 * lib/i386-ports.c, lib/i386-io-*: Report failures during port access
185 initialization by a->warn() instead of calling printf() or perror()
188 * lib/i386-ports.c, lib/i386-io-*: Moved the logic which keeps track of
189 the port access state to generic code.
191 * lib/i386-io-hurd.h: Ask the kernel for I/O port access appropriately.
192 Contributed by Thomas Schwinge and Samuel Thibault.
194 * lib/i386-ports.c: Define _GNU_SOURCE, it's needed by the Hurd module.
196 * lib/header.h: Whitespace cleanups.
198 * lib/i386-io-windows.h: Fixed indentation and spelling.
200 * README.Windows: Mention that WinIO.dll is needed and where to get it.
202 2006-06-27 Martin Mares <mj@ucw.cz>
204 * lib/Makefile, Makefile: Added rules for building and cleaning the example.
206 * lib/example.c: Show how to use PCI_FILL_CLASS and used another register
207 for demonstrating the config space accesses. The example is still very
210 * lib/pci.h, lib/generic.c: Added PCI_FILL_CLASS.
212 * lib/sysfs.c: Fetch device ID and class from sysfs, because they can
213 be modified by kernel fixups.
215 * lspci.c: Use PCI_FILL_CLASS. Thanks to Matthew Willcox for the patch.
217 2006-06-03 Martin Mares <mj@ucw.cz>
219 * lspci.c: Introduced the -nn switch. Thanks to David N. Welton
222 * lib/names.c (pci_lookup_name): Introduced PCI_LOOKUP_MIXED and
223 cleaned up the name selection code.
225 * lib/names.c (pci_lookup_name): If PCI_LOOKUP_NO_NUMBERS is given,
226 pci_access->numeric_ids is ignored.
228 * lib/names.c (pci_lookup_name): When class is identified and
229 subclass isn't, display class name and subclass number.
231 2006-05-31 Martin Mares <mj@ucw.cz>
233 * setpci.c (main): Don't crash when an invalid width is specified.
235 * lspci.c, setpci.c, common.c: die() now uses the right program
236 name when printing an error message.
238 2006-05-19 Martin Mares <mj@ucw.cz>
240 * README: Mention the public GIT tree.
242 * README: Updated the list of ports.
244 2006-05-10 Martin Mares <mj@ucw.cz>
246 * lib/configure, lib/fbsd-device.c: Added support for GNU/kFreeBSD.
247 Thanks to Petr Salinger for the patch.
249 2006-05-05 Martin Mares <mj@ucw.cz>
253 * lspci.c (scan_device): The -D switch didn't work as intended
256 2006-05-05 Martin Mares <mj@ucw.cz>
260 * pci.ids: Updated to the current database snapshot.
262 * lib/obsd-device.c (and other files in lib/*): Added OpenBSD
263 interface by Matthieu Herrb <matthieu.herrb@laas.fr>, based on
264 the existing FreeBSD interface.
266 * Moved pciutils to a GIT repository, which now contains merged
267 history from both CVS and Arch. Good bye, TLA!
269 2006-03-21 Martin Mares <mj@ucw.cz>
271 * lspci.c (show_slot_name): Avoid the previous changes in default
272 display of domain name when in machine-readable mode. However, `-D'
273 forces domain display even there.
275 * lspci.man: Added a warning on -m being the only format, which is
276 guaranteed to be stable between lspci versions.
278 2006-03-13 Martin Mares <mj@ucw.cz>
280 * lspci.man: Documented the -D switch.
282 * lspci.c (show_slot_name, scan_device): If there are multiple PCI
283 domains or if the `-D' switch is used, show the domain number for
286 * lspci.c (show_verbose): Report cache line size in bytes.
288 * update-pciids.sh: Use curl if available. Patch by Matthew Wilcox.
290 2006-01-04 Martin Mares <mj@ucw.cz>
292 * lspci.c (show_express_link): Fixed decoding of link status register.
293 Thanks to Roland Dreier for his report.
295 2005-12-12 Martin Mares <mj@ucw.cz>
297 * lib/nbsd-libpci.c: If libpci is used by an ordinary user, allow
298 at least read-only access. Patch by Pavel Celeda <celeda@liberouter.org>.
300 * Makefile: Corrected library path on NetBSD.
302 2005-11-26 Martin Mares <mj@ucw.cz>
306 * lspci.c (show_machine): Subsystem vendors were printed incorrectly
307 in machine-readable modes. Thanks to Pavel Celeda for a bug report.
309 2005-10-11 Martin Mares <mj@ucw.cz>
311 * lspci.c (new_bus): Fixed a memory leak. Thanks to Paul Sangree for reporting it.
313 2005-09-21 Martin Mares <mj@ucw.cz>
317 * pci.ids: Updated copyright header.
319 * lib/sysfs.c (sysfs_get_resources): Removed warning about unsupported
320 64-bit addresses, they are now always supported.
322 * lspci.c (show_bases): Corrected printing of 64-bit addresses
325 * lib/configure: Enable 64-bit addresses on all Linux systems.
327 * lib/types.h: Don't pad 64-bit addresses to 16 xigits, only to 8 if they
330 2005-09-11 Martin Mares <mj@ucw.cz>
332 * Released as 2.1.99-test11.
334 * lspci.c: Removed unnecessary trailing zeros in pci_lookup_name() calls.
336 2005-09-10 Martin Mares <mj@ucw.cz>
338 * Released as 2.1.99-test10.
340 * pci.ids: Synchronized with the current database snapshot.
342 * update-pciids.sh: Changed the default URL for downloading pci.ids
343 to http://pciids.sourceforge.net/v2.2/pci.ids.
345 * lib/pci.h (PCI_LIB_VERSION): Added version identifier.
347 * lib/names.c: Rewritten the name database module almost from scratch.
348 Everything is much cleaner and there are hopefully no more memory leaks;
349 pci_lookup_name() now uses varargs in a backward compatible fashion.
350 Introduced PCI_LOOKUP_NO_NUMBERS.
352 The new code supports subsystem entries not tied to a specific device.
353 I had to extend the format of pci.ids in order to support it, so I have
354 extended the idea of the "C" (class) blocks and introduced "S" blocks
355 for subsystems. To avoid doing more incompatible changes in the future,
356 the parser skips unknown single-letter blocks without reporting errors.
358 2005-08-23 Martin Mares <mj@ucw.cz>
360 * Released as 2.1.99-test9.
362 * Makefile (OPT): Removed -fomit-frame-pointer, it's default in recent
363 gcc versions when optimizing anyway.
365 * Made the path to pci.ids customizable and independent on the SHAREDIR.
366 Just override IDSDIR in the top-level Makefile.
368 * pci.ids: Synchronized with the current database snapshot.
370 * lspci.man, setpci.man: Improved the man pages. Documented all access
371 methods and which operations are privileged.
373 * lspci.c: Another rewrite of config register caching, now also including
374 lots of internal checks. It should be now perfectly able to cope with
375 portions of the configuration space being inaccessible, for example
376 due to insufficient access rights.
378 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Cleaned up dumping of PCI-X
379 capabilities. Includes partial support for PCI-X 2.0 (probably incomplete
380 as I haven't seen the spec).
382 * lspci.c: Quell warnings about unused parameters.
384 * lspci.c: Removed C++ comments.
386 * lib/header.h: Merged definitions of extended capabilities and some new
387 PCI-X capability bits from linux-2.6.11/include/pci.h.
389 * lspci.c (show_caps): Try to scan extended capabilities only if the
390 device has either PCI-X or PCI Express capability in its normal capability
393 * lib/dump.c (dump_init): Reading of dumps works again. The dump reader
394 now also remembers how much data it has read and refuses attempts to
395 access more than that.
397 * setpci.man, lspci.c, README: prefer spelling "buses" over "busses".
399 * lspci.c: If alloca() is not available, use xmalloc(), not malloc().
401 * lib/configure: Added x86_64 on Linux.
403 2005-08-22 Martin Mares <mj@ucw.cz>
405 * lib/filter.c (pci_filter_parse_slot): Fixed parsing of domain filters.
406 Thanks to Matthew Wilcox for bug report.
408 * lspci.c: Corrected spelling of "Hz" (it was "hz" at several places).
409 Thanks to Krzysztof Oledzki for pointing that out.
411 2004-08-19 Martin Mares <mj@ucw.cz>
413 * pciutils.spec (%attr): Setting attributes for /sbin/* is an anachronism,
414 because pciutils by default install to /usr/sbin. Update.
416 2004-08-13 Martin Mares <mj@ucw.cz>
418 * Released as 2.1.99-test8.
420 * lib/types.h, lib/pci.h, lib/sysdep.h: `byte' and `word' are
421 no longer exported to the outside world.
423 * README.Windows: Updated.
425 * maint/release: Substitute version number in win32/config.h.
427 * win32/config.h: Added.
429 * lib/sysdep.h (bzero, strcasecmp): are macros on Windows.
431 * compat/getopt.[ch]: Added copies of getopt.[ch] from the GNU
432 C library for use on systems where the default libraries lack
433 proper getopt. Currently used by the Windows port.
435 * lib/sysdep.h, lib/types.h: Updates of the Windows port from
438 * lib/types.h: If PCI_HAVE_Uxx_TYPES is defined, libpci doesn't define
439 its own u8, u16, u32, byte and word types and uses what the user
440 has supplied instead. With this change, all namespace clashes should
443 * Makefile, lib/Makefile: Updated dependencies.
445 * pciutils.h: Include lib/sysdep.h and move NONRET et al. there.
447 * lib/sysdep.h: No need to include <sys/types.h> on FreeBSD, because
448 it is included unconditionally in lib/types.h.
450 * Moved system-dependent stuff from lib/internal.h to lib/sysdep.h,
451 which is also used by the utilities. Also moved type declarations
452 from lib/pci.h to lib/types.h.
454 * All files: Prepend a "PCI_" prefix in front of all configuration
455 defines to avoid namespace clashes. CAVEAT: If there is any libpci
456 application using the (undocumented) defines, it has to be updated.
458 * lib/Makefile: Killed HAVE_OWN_HEADER_H, since we stopped sharing
459 headers with the kernel a couple of years ago.
461 * lib/sysfs.c (sysfs_get_resources): We have 7 resources, not 6.
463 * lspci.c (show_rom): Use the same logic for printing disabled
464 or unassigned ROM's as we do in show_bases() for the other BAR's.
466 * lib/generic.c (pci_generic_fill_info): Better reaction to
467 invalid 64-bit addresses. Also d->hdrtype should not include
468 bit 7, which caused mysterious errors on multi-function devices.
470 * lib/generic.c (pci_generic_fill_info): Fill in base addresses
471 even if the regions are known to be disabled. It is the client's
472 job to interpret them. (And it is not a trivial job if you want
473 to do it correctly, since you need to check I/O and memory enables
474 on all upstream bridges, too.) However, it could be interesting to
475 introduce functions for interpreting the addresses and even for
476 mapping the regions and doing I/O on them.
478 2004-07-30 Martin Mares <mj@ucw.cz>
480 * lspci.c: HyperTransport improvements from Maciej.
482 2004-07-11 Martin Mares <mj@ucw.cz>
484 * lib/sysfs.c (sysfs_get_resources): Arguments now correspond
485 to the format string. [Patch by Bill Nottingham]
487 2004-07-05 Martin Mares <mj@ucw.cz>
489 * Released as 2.1.99-test7.
491 * lspci.c (config_fetch): Wanted to merge Matthew's bug fix, but
492 ended up with rewriting the fetching mechanism to be fully dynamic,
493 but avoid reading config space registers not explicitly requested.
495 2004-06-29 Matthew Wilcox <willy@debian.org>
497 * lspci.c: More work on PCI Express dumping.
499 * lib/header.h: Updated PCI Express capability definitions.
501 * lib/proc.c (proc_read): Removed bogus warning.
503 * common.c (xrealloc): Introduced.
505 * lspci.man: Added -xxxx.
507 2004-06-27 Martin Mares <mj@ucw.cz>
509 * Released as 2.1.99-test6.
511 * lspci.c (show_msix), lib/header.h: Added dumping of MSI-X cap.
512 Patch by Roland Dreier <roland@topspin.com>, cleaned up by me.
514 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Handle config_fetch()
517 * lib/header.h: Added PCI Express extended capabilities. Again by Matthew.
519 * lspci.c (show_express): Added dumping of PCI Express cap.
520 Patch by Matthew Wilcox.
522 * lib/header.h: Added a list of PCI 3.0 capabilities and also details
523 on PCI Express caps. Patch by Matthew Wilcox <willy@debian.org>.
525 * lspci.c (check_root): Gone. No explicit checks for root are needed,
526 report correct errors reported by the libpci instead.
528 * lspci.c: Added dumping of the extended config space on "-xxxx".
529 Better caching of config registers.
531 * setpci.c (main): Allow access to whole 4096 bytes of the config space.
533 * lib/sysfs.c, lib/proc.c: Don't print error messages on short reads,
534 just return the appropriate error code.
536 * lib: Added support for extended (4096-byte) configuration space,
537 currently implemented only in Linux proc and sysfs access methods
538 and of course in the dump reader.
540 2004-05-29 Martin Mares <mj@ucw.cz>
542 * Released as 2.1.99-test5.
544 * lib/pci.h: Windows don't have the standard u_int* types.
546 * lib/internal.h: <sys/param.h> required on Windows for endianity
549 * lib/i386-ports.c: Connected i386-io-windows.h.
551 * lspci.c (check_root): geteuid() is not available on Windows.
553 * lib/i386-io-windows.h: Added Windows port contributed by Alexander
554 Stock <stock.alexander@gmx.de>.
556 * lib/configure: Hopefully fixed SunOS port broken by various
557 changes to the configure script.
559 * Makefile, lib/configure: Cross-compilation support, patch by Maciej.
561 2004-05-28 Martin Mares <mj@ucw.cz>
563 * Released as 2.1.99-test4.
565 * lspci.c (show_verbose): Header type 1 is probably legal for all
566 types of bridges, not only for PCI-to-PCI bridges.
568 * lspci.c (format_agp_rate): Write "x16", not "x@".
569 (show_agp): rate[] could overflow.
570 Bugs reported by Jakub Bogusz <qboosh@pld-linux.org>.
572 * lspci.c (show_ht_*): Show HyperTransport capability with all its
573 details. Once again code by Maciej simplified (i.e., possibly broken)
576 * lib/header.h: Added declarations of HyperTransport capability.
577 Again thanks to Maciej.
579 * lspci.c: Decode all bits of the secondary status word in type 1 headers.
580 Thanks to Maciej W. Rozycki <macro@ds2.pg.gda.pl> for the patch.
582 2003-12-27 Martin Mares <mj@ucw.cz>
584 * Released as 2.1.99-test3.
586 * lspci.man, setpci.man: Document domains and correct spelling.
588 * lib/dump.c (dump_init): Added ability to read domain numbers.
590 * lspci.c: Devices in domains different from 0 have their slot number
591 printed as "<domain>:<bus>:<slot>.<func>". Tree view supports domains
594 * lib/filter.c: Slot filters understand domains.
596 * lib/generic.c: Mention the domain in slot numbers in all error messages.
598 * lib/internal.h: The #ifdef for Linux <asm/byteorder.h> was wrong.
600 * lib/access.c (pci_get_dev): Added support for domains.
602 * lib/sysfs.c (sysfs_scan): Read vendor and device ID from the config
603 registers (or to be precise, leave it for the generic parts of the pcilib
604 to do so) instead of reading them from the sysfs. It's faster this way.
606 * lspci.c (show_pcix): Don't touch pci_dev->hdrtype, it's an internal
607 variable. Better read it from the config registers (it's cached anyway).
609 * lib/sysfs.c (sysfs_scan), lib/proc.c (proc_scan): Don't read the hdrtype.
610 lib/generic.c (pci_generic_fill_info): If hdrtype is -1 (unset), read it.
611 Saves lots of unnecessary file accesses.
613 * lib/pci.h (PCIADDR_PORT_FMT): Use %llx instead of %Lx, because the latter
614 is not supported by all C libraries.
616 * Makefile: Always enter the lib directory (remember that we don't have
617 full dependecies for the library in the top-level Makefile; hmmm, another
618 thing to rewrite some day).
620 * lib/sysfs.c: Added Linux sysfs access method based on the patch
621 written by Matthew Wilcox <willy@fc.hp.com>.
623 * lib/proc.c: Renamed the access method name from "/proc/bus/pci" to "Linux-proc".
625 * lib/pread.h: The hacks to support pread on various versions
626 of Linux libc moved there.
628 * lib/proc.c (proc_setup): The return value of snprintf() varies
629 between glibc versions, so we need to check both for a negative
630 values and for too large values.
632 * Removed last few references to the "Linux PCI Utilities", the
633 package is pretty cross-platform now :)
635 2003-12-27 Martin Mares <mj@ucw.cz>
637 * Released as 2.1.99-test2.
639 * README, pciutils.lsm, pciutils.spec: Use @VERSION@ to make the
640 release scripts insert the current version. "make release" is gone.
642 * maint/release, maint/release.pm: Added a new system of scripts for
643 making releases including inter-version diffs etc.
645 * Makefile: Cleaned up.
647 * lib/fbsd-device.c: I patched another copy of this file by mistake,
648 this time the version checks should be right.
650 2003-12-27 Martin Mares <mj@ucw.cz>
652 * Released as 2.1.99-test1.
654 * pciutils.h, common.c, lspci.man, setpci.man, lib/internal.h:
655 Remove shadows of the syscall access method which was never
658 * update-pciids.sh: Try to preserve permissions of the old file
659 if chmod supports --reference. Should close Debian Bug #223740.
661 * lib/proc.c (proc_setup): Increased path name length limit to 1024.
662 Thanks for Redhat and Mandrake for inspiration.
664 * lib/configure: Recognize ppc and ppc64, both have 64-bit addresses.
665 Grabbed from Redhat (Fedora) patches.
667 2003-12-27 Martin Mares <mj@ucw.cz>
669 Merged bug fixes from Debian patches:
671 * lspci.c (show_verbose): "Cache Line Size" should be capitalized.
673 * lspci.c (show_pcix_nobridge): Added a missing newline.
675 * lib/proc.c (proc_scan): When reading the header type, don't
676 forget to clear the topmost bit indicating that the device has
679 2003-12-27 Martin Mares <mj@ucw.cz>
681 Updated the FreeBSD port. Thanks to Samy Al Bahra <samy@kerneled.com>
684 * lib/Makefile: Add ${FREEBSD_SYS} to the include path if it's defined.
685 * lib/fbsd-device.c: Select the right set of system includes according
686 to __FreeBSD_version.
688 2003-12-27 Martin Mares <mj@ucw.cz>
690 Merged support for Solaris on i386 by Bill Moore <billm@eng.sun.com>
693 * lib/configure: Recognize SunOS.
694 * lib/internal.h: Learn how to recognize byte order on SunOS.
695 * lib/i386-ports.c: Split OS-dependent I/O port access from i386-ports.c.
696 * lib/i386-io-linux.h: Linux specific part.
697 * lib/i386-io-hurd.h: GNU/Hurd specific part.
698 * lib/i386-io-sunos.h: SunOS specific part.
700 2003-12-26 Martin Mares <mj@ucw.cz>
702 * lib/header.h (PCI_*_MASK): Cast to pciaddr_t explicitly.
704 * lib/pci.h: Types declared in <sys/types.h> should be usable on all
705 platforms we currently support, so kill the forest of #ifdef's and
706 use them in all cases.
708 * lib/pci.h: Use ULONG_MASK to decide whether we should use long
709 or long long to represent a 64-bit address. Killed HAVE_LONG_ADDRESS.
710 Define format strings for addresses, port numbers and IRQ numbers
713 * lib/proc.c (proc_scan): Use PCIADDR_T_FMT for scanf'ing addresses.
715 2003-12-26 Marco Gerards <metgerards@student.han.nl>
717 Added support for the GNU Hurd (cleaned up by Martin Mares):
719 * lib/configure [GNU]: Use the i386 ports for configuration access.
720 * lib/i386-ports.c: Don't call iopl() on the Hurd.
721 * lib/pci.h [OS_GNU]: Include <sys/types.h> and use it for defining
724 2003-12-26 Martin Mares <mj@ucw.cz>
726 * lspci.c (show_pcix_bridge, show_pcix_nobridge): Don't forget to call
727 config_fetch() to ensure that the registers have been read. Thanks to
728 Bill Wood <bill.wood@hp.com> for the patch.
730 * lspci.c: Ensure that failure of config_fetch() is handled correctly
733 * lspci.man: There was one more explicit reference to /usr/share/pci.ids.
734 Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <macro@ds2.pg.gda.pl>.
736 * setpci.c (main): Better error messages.
738 * setpci.c (ex_op): The demo mode should disable only writing, not reading.
740 * setpci.man: The documentation was inconsistent on what should -D do.
741 Document the new behaviour.
743 * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
744 the GCC specific __attribute__((noreturn)) and killed the hack with
745 redefining __attribute__ on non-GCC compilers.
747 * Makefile: Added missing dependencies. Parallel builds work now.
748 Problem reported by Andreas Haumer <andreas@xss.co.at>, but I chose
751 * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
752 command every time $(MANDIR) is referenced.
754 * lspci.c (main): The error message for `lspci -s' incorrectly mentioned
755 a `-f' switch. Reported by Steve Finney <Steve.Finney@SpirentCom.COM>.
757 * lib/generic.c: Removed memory leak in pci_generic_bus_scan().
758 Reported by Gary Parnes <gary_parnes@terago.com>.
760 * Replaced obsolete syntax of __attribute__((unused)) in the middle of
761 parameter declarations (which is no longer supported by GCC 3.1) by the
762 current syntax (attribute at the end). Thanks to pixel@mandrakesoft.com
763 for reporting this problem.
765 * Removed CVS $Id$ tags from all files.
767 * Makefile: Added some more warnings.
769 * setpci.c: Cleaned up mask/value code.
771 2003-12-08 Thayne Harbaugh <tharbaugh@lnxi.com>
773 * setpci.c: Individual bits to be set can be specified as <value>:<mask>.
775 2003-11-29 Martin Mares <mj@ucw.cz>
777 * Imported the pciutils sources to my Arch repository. Good-bye, CVS.
779 2003-01-04 Martin Mares <mj@ucw.cz>
781 * Released as 2.1.11.
783 * Makefile: Changed configuration of installation directories --
784 all paths are now set at the top of the Makefile instead of being
785 scattered between the installation rules. The default installation
786 now goes always to /usr/local regardless of the OS as most distributions
787 already contain some version of pciutils and we don't want custom
788 installations to interfere with the default ones.
790 * Makefile: Removed a couple of ancient install hacks: we no longer
791 try to avoid overwriting a newer pci.ids file (users are now expected
792 to use update-ids) and we don't try to remove /etc/pci.ids (a long time
793 has passed since the last version which used it).
795 * Makefile: Paths to pci.ids in man pages automatically get the right path.
797 * Added the update-ids utility.
799 * lib: Removed partially implemented "syscall" access method which will
800 probably never be needed.
802 2002-12-27 Martin Mares <mj@ucw.cz>
804 * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.
806 * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
807 discontiguous numbering of functions. This is already present in the Linux
808 kernel for several years, but I forgot to update pciutils as well.
810 2002-12-26 Martin Mares <mj@ucw.cz>
812 * lib/header.h, lspci.c: Dump AGP3 flags and speeds.
814 * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
815 there is no reason to prefer the kernel version.
817 * lib/proc.c (proc_scan): Don't forget to initialize hdrtype.
819 * Added preliminary version of NetBSD support by Quentin Garnier
820 <netbsd@quatriemek.com>.
822 2002-04-06 Martin Mares <mj@ucw.cz>
824 * lspci.c: Mention "-xxx" in the help.
826 2002-03-30 Martin Mares <mj@ucw.cz>
828 * Released as 2.1.10.
830 * Removed pci.ids from the CVS as they are now maintained separately.
831 They are still included in the tarball, but if you are building pciutils
832 from CVS sources or you want to get a newer ID file than the one distributed,
833 just use "make update-ids" to download the most recent snapshot from
836 * Makefile, README: Updated accordingly.
838 * Makefile: Added a couple of maintenance targets.
840 * maint/*: Maintainer's utilities now reside here (present only in CVS,
843 * lib/names.c (parse_name_list): End-of-line comments are no longer
844 supported. Hashes are now perfectly valid in all names and they start
845 a comment only at the start of the line.
847 2002-03-26 Martin Mares <mj@ucw.cz>
851 * Makefile: When the currently installed pci.ids file is newer than
852 the version to be installed, don't overwrite it. Suggested by
853 Jean Delvare <khali@linux-fr.org>.
855 2002-03-24 Martin Mares <mj@ucw.cz>
857 * lspci.c (show_pcix_bridge): Added PCI-X capability display.
858 Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
860 * lib/header.h: Added PCI-X stuff. Again by Jeff.
862 * Makefile (CFLAGS): -Werror is gone.
864 * lspci.c (format_agp_rate): Fixed AGP rate reporting.
866 * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
869 * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
870 or device hexadecimally, don't confuse it with chip vendor/device ID.
871 First reported by Marc Boucher <marc@mbsi.ca>.
873 2001-11-04 Martin Mares <mj@ucw.cz>
877 * pci.ids: Synced with the PCI ID Repository at SourceForge
878 (http://pciids.sourceforge.net/).
880 2000-08-25 Martin Mares <mj@albireo.ucw.cz>
882 * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
884 2000-06-13 Martin Mares <mj@albireo.ucw.cz>
886 * Makefile (uninstall): Fixed.
888 * pci.ids: ID updates.
890 2000-05-20 Martin Mares <mj@albireo.ucw.cz>
894 * pci.ids: ID updates.
896 * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
898 2000-05-04 Martin Mares <mj@albireo.ucw.cz>
900 * lspci.c (show_verbose): If the header type doesn't match device
901 class, just print a warning and still use the header type, assuming
904 2000-05-01 Martin Mares <mj@albireo.ucw.cz>
906 * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
908 * pci.ids: Updated Contemporary Control ARCnet card entries.
910 * pci.ids: Synchronized class list with latest PCI SIG documents.
912 2000-04-29 Martin Mares <mj@albireo.ucw.cz>
914 * lib/names.c (pci_lookup_name): Fixed the cheat.
916 * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
918 * pci.ids: Various ID updates.
920 2000-04-21 Martin Mares <mj@albireo.ucw.cz>
924 * pciutils.spec: Added German description.
926 * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
927 are the same as device ID and just output subsystem name according to
930 * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
932 * lib/pci.h: Added the correct typedefs for AIX.
934 * lib/generic.c (pci_generic_scan_bus): Export.
936 * lib/configure: Detect AIX. Use "echo '...\c'" instead of
937 "echo -n" if the shell isn't bash.
939 * lspci.c: Avoid using alloca() if not compiled by GCC.
940 (insert_dev): Avoid returning a void value.
942 * Makefile: Choose which install utility to use according to
943 OS type. Also use `-o' instead of `-or' in find arguments.
944 Part of the AIX port.
946 * lib/aix-device.c: Added AIX low-level interface. Contributed
947 by Dave Johnson <ddj@brown.edu>, thanks a lot!
949 * pci.ids: Few new ID's.
951 * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
952 when not compiled by GCC.
954 2000-04-17 Martin Mares <mj@albireo.ucw.cz>
958 * pci.ids: Added a large batch of ID's contributed by Gunther
959 Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
960 list with the 2.3.99pre6 kernel.
962 Thu Mar 9 13:11:39 2000 Martin Mares <mj@albireo.ucw.cz>
964 * lib/example.c: Added a simple example of how to use
967 * lspci.man, setpci.man: Revealed --version. Well spotted
970 * pci.ids: Added lots of new ID's and synced with 2.3.50.
972 Tue Feb 15 00:16:21 2000 Martin Mares <mj@albireo.ucw.cz>
976 * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
977 %{_mandir} to find the right location to install manual pages to.
981 * setpci.c (main): Don't crash when `-s' or `-d' is given with
984 Mon Jan 24 20:04:11 2000 Andreas Jaeger <aj@suse.de>
986 * lib/i386-ports.c: Include <asm/io.h> only on systems without
989 Mon Jan 24 11:24:43 2000 Martin Mares <mj@albireo.ucw.cz>
991 * Makefile: Modified to work with the Linux FHS brain-damaged idea
992 of putting man pages to /usr/share/man. Now we choose either /usr/man
993 or /usr/share/man depending on which one exists.
995 Sun Jan 23 10:52:34 2000 Martin Mares <mj@albireo.ucw.cz>
997 * pci.ids: Synced with Linux 2.3.40.
999 * Released as version 2.1.4.
1001 Thu Jan 20 11:08:32 2000 Martin Mares <mj@albireo.ucw.cz>
1003 * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
1005 * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
1007 * lspci.c (format_agp_rate): Better formatting of AGP rates.
1009 * pci.ids: New ID's.
1011 * lib/configure: Added configuration for ia64 (the same as for Alpha).
1012 Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
1014 Thu Jan 13 23:01:52 2000 Martin Mares <mj@albireo.ucw.cz>
1016 * Released as version 2.1.3.
1018 * pci.ids: New ID's.
1020 * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
1022 * lib/access.c: Corrected order of access methods -- it's wonderful how
1023 long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
1025 Sat Dec 11 23:34:48 1999 Martin Mares <mj@albireo.ucw.cz>
1027 * Released as version 2.1.2.
1029 * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
1031 Sat Dec 4 13:11:03 1999 Martin Mares <mj@albireo.ucw.cz>
1033 * Released as version 2.1.1.
1035 * pci.ids: Several new ID's.
1037 * setpci.c (exec_op): Don't forget to increment address after writing
1038 single value, so that `30.b=12,34,56,78' works as expected. Reported
1039 by Petr Soucek <petr@ryston.cz>.
1041 Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz>
1043 * lspci.c (show_terse): If prog-if is zero, but it's present in the
1046 Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
1048 * Released as version 2.1.
1050 * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
1051 lots of contributed entries.
1053 Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
1055 * pci.ids: Added lots of subsystem definitions.
1057 Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
1059 * setpci.man: Better example.
1061 * lspci.c: Resolve prog-if names.
1063 * lib/names.c: Adapted to new pci.ids syntax.
1065 * pci.ids: Reorganized the pci.ids file. Subsystems are listed
1066 under devices, classes can optionally contain prog-if information.
1067 New ID's, as usually.
1069 Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
1071 * pci.ids: New ID's. As usually.
1073 * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
1074 unless we're vvvery verbose.
1076 Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
1078 * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
1080 Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
1082 * pci.ids: New ID's. Again.
1084 Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
1086 * lspci.c (show_size): Don't show size if it's zero (usually
1087 due to bus-centric mode being enabled).
1089 Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
1091 * lib/pci.h: Types are OS dependent.
1093 * lib/internal.h: Byte order hacks are OS dependent.
1095 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
1097 * lib/Makefile, lib/access.c: Added fbsd-device target.
1099 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
1100 incorrectly set to device ID.
1102 * README: Added a note that we support FreeBSD.
1104 * Makefile (PREFIX, ROOT): Set it depending on the OS.
1105 (%.8): Grrr, BSD date is not able to convert date formats the same way
1106 as GNU date does. Use sed instead.
1107 (install): Use `-c' when calling install.
1109 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
1110 by Jari Kirma <kirma@cs.hut.fi>.
1112 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
1113 and pwrite only when we are certain it's safe (i.e., glibc 2.1
1114 on all architectures or any libc on a i386 where we really know
1115 how to use syscalls directly). In all other cases, emulate it
1116 with lseek/read/write.
1118 * pci.ids: Some more IDs.
1120 Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
1122 * pci.ids: Added IDs of parallel port controller cards as sent
1123 by Tim Waugh <tim@cyberelk.demon.co.uk>.
1125 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
1127 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
1129 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
1132 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
1133 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
1134 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
1135 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
1138 * lspci.c (show_msi): Added dumping of the MSI capability.
1139 (show_slotid): The same for SlotID capability.
1140 (show_caps): Seperated capability dumping, because it should
1141 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
1142 layout of htype2, so I'm a bit unsure about it wrt capabilities
1143 -- they at least have to live somewhere else since address 0x34
1144 is already defined differently in htype2.
1146 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
1147 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
1148 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
1150 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
1151 (required by the PCI 2.2 specs).
1153 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
1155 * lspci.c (show_size): Added new function for dumping of region sizes.
1156 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
1159 * lib/pci.h (struct pci_dev): known_fields moved to the public part
1162 * Added support for region sizes. Needs support in the kernel, because
1163 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
1164 now returns a bitmask of what fields were really read.
1166 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
1169 Added `uninstall' target - removes all traces of pciutils.
1171 - Lots of cleanups in the ATI, S3, Adaptec vendors.
1172 - Changed Compaq QVision 1280/p definitions, as it's not possible
1173 to determine the revision from the device ID.
1174 - Same for the Tseng ET4000.
1175 The id's said I had a rev C, when it was actually a rev B.
1176 - Removed some unnecessary strings
1177 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
1178 `Ethernet card'. This should be determined from config space.
1179 - Lots of other new vendors & devices
1180 - Other additional small cleanups.
1182 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
1184 * lib/names.c (pci_lookup_name): When device ID lookup
1185 fails, return hexadecimal device ID instead of vendor ID.
1186 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
1187 I've just extended the fix to subsystem ID's.
1189 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
1191 * lspci.c (show_agp): Bug fix from Petr Vandrovec
1192 <vandrove@vc.cvut.cz>. The command register was displayed
1195 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
1197 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
1198 numbers if not supplied by the libc.
1200 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
1202 * Released the whole package as version 2.0.
1204 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
1206 * pci.ids: Added several new ID's contributed by people
1207 on the linux-pci list.
1209 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
1211 * lspci.c: Display I/O addresses correctly on sparc64.
1212 * lib/header.h: Ditto.
1214 * lib/configure: On sparc set HAVE_64BIT* as well, we want
1215 a binary which works on both 32bit and 64bit SPARCs.
1217 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
1219 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
1222 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
1224 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
1226 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
1227 as a multi-function device, because several single-function devices
1228 don't decode the function bits at all.
1230 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
1232 * Makefile (install): Don't use "-o root -g root" for installation
1233 since it breaks on machines where programs are not installed by root.
1234 Reported by Richard Gooch <rgooch@atnf.csiro.au>
1236 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
1238 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
1240 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
1241 or 64-bit depending on CPU.
1243 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
1244 according to bus address width.
1246 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
1248 * Released as 1.99.4.
1250 * lspci.c: Capability list parser now recognizes both AGP
1251 registers and PCI Power Management registers (the latter
1252 is mainly guesswork based on DEC/Intel 21153 bridge specs
1253 since I don't have the PCI Power Management document).
1255 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
1258 * lspci.c: Added bridge checks to bus mapping code.
1260 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
1262 * lspci.c: Implemented bus mapping mode (-M).
1264 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
1265 (show): Split to show() and show_device().
1267 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
1268 set it to the real access method afterwards.
1270 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
1272 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
1273 don't check PCI_COMMAND for I/O and memory enables.
1275 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
1277 * Makefile: Added target `release' which substitutes new version
1278 number to .spec, .lsm and README. Also rewrote target `dist'.
1280 * Released as 1.99.3.
1282 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
1284 * lib/header.h: Until kernel adopts new layout of PCI
1285 includes (i.e., separate declaration of header structure,
1286 functions and device IDs), which is not going to happen
1287 before 2.3, we'll use our own definiton of the header.
1289 * lspci.c (show_verbose): Display `Cap' flag in device status.
1291 * lspci.c (show_htype0): Display capability lists whereever
1292 available. The only capability name we recognize now is `AGP'.
1293 Unfortunately, capabilities are stored in device-dependent
1294 portion of the configuration space and are thus available
1295 only to root unless you read a dump.
1297 * lspci.c (scan_devices): Use cache instead of buffering.
1299 * lib/buffer.c: Removed (obsoleted by the cache).
1301 * lib/access.c: Added general caching mechanism.
1303 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
1305 * pci.ids: Added few devices.
1307 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
1309 * Version string is now defined in top-level Makefile, exported
1310 to the configure script and also substituted to man pages.
1312 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
1313 (show_verbose): Rewrote interrupt display logic.
1315 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
1317 * lib/configure: Rewrote detection of Linux versions. Now it
1318 works on 2.0 kernels (only with direct/dump access, of course).
1320 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
1323 * lib/proc.c (proc_read, proc_write): Distinguish between short
1324 read/write and real errors.
1326 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
1327 libpci respects buscentric mode automatically.
1329 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
1330 bytes of header (the whole standard part).
1332 * common.c: pcilib options are now all uppercase. Also moved
1333 PCI access debugging option here.
1335 * Released as 1.99.2.
1337 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
1339 * Wrote configure script and rewrote Makefiles.
1341 * Removed few unused variables.
1343 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
1345 * common.c: Moved several functions used in both setpci and lspci
1346 here. This includes parsing of libpci-related options.
1348 * More library tweaks.
1350 * filter.c, names.c: Moved to library.
1352 * setpci: Rewritten to use the library.
1354 * Released as 1.99.1.
1356 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
1358 * lspci.c (scan_devices): For cardbus bridges, read first 128
1359 bytes of config space to get full standard header.
1361 * Makefile (CFLAGS): Removed "-Wno-unused".
1363 * Started the "New Generation" branch and introduced the
1366 * lspci: Rewritten to use the library.
1368 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
1370 * Released as version 1.10.
1372 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
1374 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
1375 Dag Wieers <dag@digibel.be>.
1377 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
1379 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
1381 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
1383 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
1385 * Released as version 1.09.
1387 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
1389 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
1390 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
1392 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
1394 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
1396 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
1398 * Released as version 1.08.
1400 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
1402 * lspci.8: Changed warning about lspci -xxx.
1404 * lspci.c: Require "-xxx" for full configuration space dump, so that
1405 it's impossible to crash the machine by single typo.
1407 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
1409 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
1411 * lspci.c (show_bases): Better displaying of unassigned and
1412 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
1415 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
1417 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
1418 (thanks to Geert Uytterhoeven for finding this out)
1420 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
1422 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
1423 (show_machine): Print subsystem ID.
1425 * names.c: New name resolution engine supporting subsystem IDs.
1427 * Released as version 1.07.
1429 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
1431 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
1432 (show_bases): Honor the `cnt' argument.
1433 (grow_tree): Parse CardBus headers in tree mode as well.
1435 * pci.h: Updated CardBus header field description. I still don't
1436 have the CardBus standard available, but OZ6832 specs contain
1437 full description of all header fields supported by the chip.
1439 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
1443 * names.c (parse_name_list): Killed an unused variable.
1445 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
1446 if they are not defined by glibc (needed for glibc built on older
1449 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
1451 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
1455 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
1456 should be gone. Again thanks to Steve for bug report.
1458 * filter.c (filter_parse_slot): Fixed ":x" type filters.
1460 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
1461 <steve@icarus.com> for reporting this.
1463 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
1465 * lspci.c (main), setpci.c (main): Implemented "--version".
1469 * pciutils.h (PCIUTILS_VERSION): Added version string.
1471 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
1472 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
1475 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
1477 * pci.ids: More updates from Jens Maurer.
1479 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
1481 * pci.ids: Updates from Jens Maurer.
1483 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
1487 * setpci.8: Written.
1489 * setpci.c: Finished.
1491 * lspci.c: Now able to fetch expansion ROM base from kernel device list
1492 and print it if not in buscentric mode.
1494 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
1498 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
1500 * lspci.8: Updated the documentation.
1502 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
1504 * filter.c: Introduced new generic device filter.
1506 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
1508 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
1509 of PCI-to-PCI bridges in the tree format.
1511 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
1513 * lspci.c (show_machine): Added non-verbose mode of machine-readable
1516 * pci.ids: Updates from Jens Maurer.
1518 * Released as version 1.02.
1520 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
1522 * lspci.c: Added a "-m" switch for dumping machine-readable
1523 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
1525 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
1527 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
1528 if available. This should avoid all problems with official kernel
1529 not synchronized to newer PCI code in CVS -- standard distribution
1530 of pciutils now contains pci.h from current CVS kernel, pciutils
1531 in CVS contain no pci.h and use the correct kernel include.
1533 * Makefile: Fixed installation path for man pages.
1535 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
1539 * lspci.8: Created a man page.
1541 * Releasing as version 1.0.
1543 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
1545 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
1546 to all the C sources. This should eliminate problems with 32-bit compilers
1549 * lspci.c (show_verbose): Recognize CardBus bridge header type.
1550 (show_htype2): Stub routine.
1551 (scan_config): Write sensible error message if the kernel denies reading of
1552 upper part of the PCI config space.