1 2003-12-26 Martin Mares <mj@ucw.cz>
3 * setpci.c (main): Better error messages.
5 * setpci.c (ex_op): The demo mode was never documented to disable reads,
6 only writes, so conform with the definition.
8 * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
9 the GCC specific __attribute__((noreturn)) and killed the hack with
10 redefining __attribute__ on non-GCC compilers.
12 * Makefile: Added missing dependencies. Parallel builds work now.
13 Problem reported by Andreas Haumer <andreas@xss.co.at>, but I chose
16 * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
17 command every time $(MANDIR) is referenced.
19 * lspci.c (main): The error message for `lspci -s' incorrectly mentioned
20 a `-f' switch. Reported by Steve Finney <Steve.Finney@SpirentCom.COM>.
22 * lib/generic.c: Removed memory leak in pci_generic_bus_scan().
23 Reported by Gary Parnes <gary_parnes@terago.com>.
25 * Replaced obsolete syntax of __attribute__((unused)) in the middle of
26 parameter declarations (which is no longer supported by GCC 3.1) by the
27 current syntax (attribute at the end). Thanks to pixel@mandrakesoft.com
28 for reporting this problem.
30 * Removed CVS $Id$ tags from all files.
32 * Makefile: Added some more warnings.
34 * setpci.c: Cleaned up mask/value code.
36 2003-12-08 Thayne Harbaugh <tharbaugh@lnxi.com>
38 * setpci.c: Individual bits to be set can be specified as <value>:<mask>.
40 2003-11-29 Martin Mares <mj@ucw.cz>
42 * Imported the pciutils sources to my Arch repository. Good-bye, CVS.
44 2003-01-04 Martin Mares <mj@ucw.cz>
48 * Makefile: Changed configuration of installation directories --
49 all paths are now set at the top of the Makefile instead of being
50 scattered between the installation rules. The default installation
51 now goes always to /usr/local regardless of the OS as most distributions
52 already contain some version of pciutils and we don't want custom
53 installations to interfere with the default ones.
55 * Makefile: Removed a couple of ancient install hacks: we no longer
56 try to avoid overwriting a newer pci.ids file (users are now expected
57 to use update-ids) and we don't try to remove /etc/pci.ids (a long time
58 has passed since the last version which used it).
60 * Makefile: Paths to pci.ids in man pages automatically get the right path.
62 * Added the update-ids utility.
64 * lib: Removed partially implemented "syscall" access method which will
65 probably never be needed.
67 2002-12-27 Martin Mares <mj@ucw.cz>
69 * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.
71 * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
72 discontiguous numbering of functions. This is already present in the Linux
73 kernel for several years, but I forgot to update pciutils as well.
75 2002-12-26 Martin Mares <mj@ucw.cz>
77 * lib/header.h, lspci.c: Dump AGP3 flags and speeds.
79 * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
80 there is no reason to prefer the kernel version.
82 * lib/proc.c (proc_scan): Don't forget to initialize hdrtype.
84 * Added preliminary version of NetBSD support by Quentin Garnier
85 <netbsd@quatriemek.com>.
87 2002-04-06 Martin Mares <mj@ucw.cz>
89 * lspci.c: Mention "-xxx" in the help.
91 2002-03-30 Martin Mares <mj@ucw.cz>
95 * Removed pci.ids from the CVS as they are now maintained separately.
96 They are still included in the tarball, but if you are building pciutils
97 from CVS sources or you want to get a newer ID file than the one distributed,
98 just use "make update-ids" to download the most recent snapshot from
101 * Makefile, README: Updated accordingly.
103 * Makefile: Added a couple of maintenance targets.
105 * maint/*: Maintainer's utilities now reside here (present only in CVS,
108 * lib/names.c (parse_name_list): End-of-line comments are no longer
109 supported. Hashes are now perfectly valid in all names and they start
110 a comment only at the start of the line.
112 2002-03-26 Martin Mares <mj@ucw.cz>
116 * Makefile: When the currently installed pci.ids file is newer than
117 the version to be installed, don't overwrite it. Suggested by
118 Jean Delvare <khali@linux-fr.org>.
120 2002-03-24 Martin Mares <mj@ucw.cz>
122 * lspci.c (show_pcix_bridge): Added PCI-X capability display.
123 Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
125 * lib/header.h: Added PCI-X stuff. Again by Jeff.
127 * Makefile (CFLAGS): -Werror is gone.
129 * lspci.c (format_agp_rate): Fixed AGP rate reporting.
131 * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
134 * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
135 or device hexadecimally, don't confuse it with chip vendor/device ID.
136 First reported by Marc Boucher <marc@mbsi.ca>.
138 2001-11-04 Martin Mares <mj@ucw.cz>
142 * pci.ids: Synced with the PCI ID Repository at SourceForge
143 (http://pciids.sourceforge.net/).
145 2000-08-25 Martin Mares <mj@albireo.ucw.cz>
147 * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
149 2000-06-13 Martin Mares <mj@albireo.ucw.cz>
151 * Makefile (uninstall): Fixed.
153 * pci.ids: ID updates.
155 2000-05-20 Martin Mares <mj@albireo.ucw.cz>
159 * pci.ids: ID updates.
161 * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
163 2000-05-04 Martin Mares <mj@albireo.ucw.cz>
165 * lspci.c (show_verbose): If the header type doesn't match device
166 class, just print a warning and still use the header type, assuming
169 2000-05-01 Martin Mares <mj@albireo.ucw.cz>
171 * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
173 * pci.ids: Updated Contemporary Control ARCnet card entries.
175 * pci.ids: Synchronized class list with latest PCI SIG documents.
177 2000-04-29 Martin Mares <mj@albireo.ucw.cz>
179 * lib/names.c (pci_lookup_name): Fixed the cheat.
181 * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
183 * pci.ids: Various ID updates.
185 2000-04-21 Martin Mares <mj@albireo.ucw.cz>
189 * pciutils.spec: Added German description.
191 * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
192 are the same as device ID and just output subsystem name according to
195 * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
197 * lib/pci.h: Added the correct typedefs for AIX.
199 * lib/generic.c (pci_generic_scan_bus): Export.
201 * lib/configure: Detect AIX. Use "echo '...\c'" instead of
202 "echo -n" if the shell isn't bash.
204 * lspci.c: Avoid using alloca() if not compiled by GCC.
205 (insert_dev): Avoid returning a void value.
207 * Makefile: Choose which install utility to use according to
208 OS type. Also use `-o' instead of `-or' in find arguments.
209 Part of the AIX port.
211 * lib/aix-device.c: Added AIX low-level interface. Contributed
212 by Dave Johnson <ddj@brown.edu>, thanks a lot!
214 * pci.ids: Few new ID's.
216 * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
217 when not compiled by GCC.
219 2000-04-17 Martin Mares <mj@albireo.ucw.cz>
223 * pci.ids: Added a large batch of ID's contributed by Gunther
224 Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
225 list with the 2.3.99pre6 kernel.
227 Thu Mar 9 13:11:39 2000 Martin Mares <mj@albireo.ucw.cz>
229 * lib/example.c: Added a simple example of how to use
232 * lspci.man, setpci.man: Revealed --version. Well spotted
235 * pci.ids: Added lots of new ID's and synced with 2.3.50.
237 Tue Feb 15 00:16:21 2000 Martin Mares <mj@albireo.ucw.cz>
241 * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
242 %{_mandir} to find the right location to install manual pages to.
246 * setpci.c (main): Don't crash when `-s' or `-d' is given with
249 Mon Jan 24 20:04:11 2000 Andreas Jaeger <aj@suse.de>
251 * lib/i386-ports.c: Include <asm/io.h> only on systems without
254 Mon Jan 24 11:24:43 2000 Martin Mares <mj@albireo.ucw.cz>
256 * Makefile: Modified to work with the Linux FHS brain-damaged idea
257 of putting man pages to /usr/share/man. Now we choose either /usr/man
258 or /usr/share/man depending on which one exists.
260 Sun Jan 23 10:52:34 2000 Martin Mares <mj@albireo.ucw.cz>
262 * pci.ids: Synced with Linux 2.3.40.
264 * Released as version 2.1.4.
266 Thu Jan 20 11:08:32 2000 Martin Mares <mj@albireo.ucw.cz>
268 * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
270 * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
272 * lspci.c (format_agp_rate): Better formatting of AGP rates.
276 * lib/configure: Added configuration for ia64 (the same as for Alpha).
277 Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
279 Thu Jan 13 23:01:52 2000 Martin Mares <mj@albireo.ucw.cz>
281 * Released as version 2.1.3.
285 * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
287 * lib/access.c: Corrected order of access methods -- it's wonderful how
288 long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
290 Sat Dec 11 23:34:48 1999 Martin Mares <mj@albireo.ucw.cz>
292 * Released as version 2.1.2.
294 * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
296 Sat Dec 4 13:11:03 1999 Martin Mares <mj@albireo.ucw.cz>
298 * Released as version 2.1.1.
300 * pci.ids: Several new ID's.
302 * setpci.c (exec_op): Don't forget to increment address after writing
303 single value, so that `30.b=12,34,56,78' works as expected. Reported
304 by Petr Soucek <petr@ryston.cz>.
306 Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz>
308 * lspci.c (show_terse): If prog-if is zero, but it's present in the
311 Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
313 * Released as version 2.1.
315 * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
316 lots of contributed entries.
318 Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
320 * pci.ids: Added lots of subsystem definitions.
322 Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
324 * setpci.man: Better example.
326 * lspci.c: Resolve prog-if names.
328 * lib/names.c: Adapted to new pci.ids syntax.
330 * pci.ids: Reorganized the pci.ids file. Subsystems are listed
331 under devices, classes can optionally contain prog-if information.
332 New ID's, as usually.
334 Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
336 * pci.ids: New ID's. As usually.
338 * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
339 unless we're vvvery verbose.
341 Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
343 * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
345 Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
347 * pci.ids: New ID's. Again.
349 Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
351 * lspci.c (show_size): Don't show size if it's zero (usually
352 due to bus-centric mode being enabled).
354 Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
356 * lib/pci.h: Types are OS dependent.
358 * lib/internal.h: Byte order hacks are OS dependent.
360 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
362 * lib/Makefile, lib/access.c: Added fbsd-device target.
364 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
365 incorrectly set to device ID.
367 * README: Added a note that we support FreeBSD.
369 * Makefile (PREFIX, ROOT): Set it depending on the OS.
370 (%.8): Grrr, BSD date is not able to convert date formats the same way
371 as GNU date does. Use sed instead.
372 (install): Use `-c' when calling install.
374 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
375 by Jari Kirma <kirma@cs.hut.fi>.
377 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
378 and pwrite only when we are certain it's safe (i.e., glibc 2.1
379 on all architectures or any libc on a i386 where we really know
380 how to use syscalls directly). In all other cases, emulate it
381 with lseek/read/write.
383 * pci.ids: Some more IDs.
385 Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
387 * pci.ids: Added IDs of parallel port controller cards as sent
388 by Tim Waugh <tim@cyberelk.demon.co.uk>.
390 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
392 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
394 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
397 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
398 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
399 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
400 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
403 * lspci.c (show_msi): Added dumping of the MSI capability.
404 (show_slotid): The same for SlotID capability.
405 (show_caps): Seperated capability dumping, because it should
406 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
407 layout of htype2, so I'm a bit unsure about it wrt capabilities
408 -- they at least have to live somewhere else since address 0x34
409 is already defined differently in htype2.
411 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
412 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
413 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
415 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
416 (required by the PCI 2.2 specs).
418 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
420 * lspci.c (show_size): Added new function for dumping of region sizes.
421 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
424 * lib/pci.h (struct pci_dev): known_fields moved to the public part
427 * Added support for region sizes. Needs support in the kernel, because
428 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
429 now returns a bitmask of what fields were really read.
431 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
434 Added `uninstall' target - removes all traces of pciutils.
436 - Lots of cleanups in the ATI, S3, Adaptec vendors.
437 - Changed Compaq QVision 1280/p definitions, as it's not possible
438 to determine the revision from the device ID.
439 - Same for the Tseng ET4000.
440 The id's said I had a rev C, when it was actually a rev B.
441 - Removed some unnecessary strings
442 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
443 `Ethernet card'. This should be determined from config space.
444 - Lots of other new vendors & devices
445 - Other additional small cleanups.
447 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
449 * lib/names.c (pci_lookup_name): When device ID lookup
450 fails, return hexadecimal device ID instead of vendor ID.
451 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
452 I've just extended the fix to subsystem ID's.
454 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
456 * lspci.c (show_agp): Bug fix from Petr Vandrovec
457 <vandrove@vc.cvut.cz>. The command register was displayed
460 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
462 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
463 numbers if not supplied by the libc.
465 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
467 * Released the whole package as version 2.0.
469 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
471 * pci.ids: Added several new ID's contributed by people
472 on the linux-pci list.
474 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
476 * lspci.c: Display I/O addresses correctly on sparc64.
477 * lib/header.h: Ditto.
479 * lib/configure: On sparc set HAVE_64BIT* as well, we want
480 a binary which works on both 32bit and 64bit SPARCs.
482 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
484 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
487 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
489 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
491 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
492 as a multi-function device, because several single-function devices
493 don't decode the function bits at all.
495 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
497 * Makefile (install): Don't use "-o root -g root" for installation
498 since it breaks on machines where programs are not installed by root.
499 Reported by Richard Gooch <rgooch@atnf.csiro.au>
501 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
503 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
505 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
506 or 64-bit depending on CPU.
508 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
509 according to bus address width.
511 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
513 * Released as 1.99.4.
515 * lspci.c: Capability list parser now recognizes both AGP
516 registers and PCI Power Management registers (the latter
517 is mainly guesswork based on DEC/Intel 21153 bridge specs
518 since I don't have the PCI Power Management document).
520 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
523 * lspci.c: Added bridge checks to bus mapping code.
525 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
527 * lspci.c: Implemented bus mapping mode (-M).
529 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
530 (show): Split to show() and show_device().
532 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
533 set it to the real access method afterwards.
535 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
537 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
538 don't check PCI_COMMAND for I/O and memory enables.
540 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
542 * Makefile: Added target `release' which substitutes new version
543 number to .spec, .lsm and README. Also rewrote target `dist'.
545 * Released as 1.99.3.
547 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
549 * lib/header.h: Until kernel adopts new layout of PCI
550 includes (i.e., separate declaration of header structure,
551 functions and device IDs), which is not going to happen
552 before 2.3, we'll use our own definiton of the header.
554 * lspci.c (show_verbose): Display `Cap' flag in device status.
556 * lspci.c (show_htype0): Display capability lists whereever
557 available. The only capability name we recognize now is `AGP'.
558 Unfortunately, capabilities are stored in device-dependent
559 portion of the configuration space and are thus available
560 only to root unless you read a dump.
562 * lspci.c (scan_devices): Use cache instead of buffering.
564 * lib/buffer.c: Removed (obsoleted by the cache).
566 * lib/access.c: Added general caching mechanism.
568 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
570 * pci.ids: Added few devices.
572 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
574 * Version string is now defined in top-level Makefile, exported
575 to the configure script and also substituted to man pages.
577 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
578 (show_verbose): Rewrote interrupt display logic.
580 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
582 * lib/configure: Rewrote detection of Linux versions. Now it
583 works on 2.0 kernels (only with direct/dump access, of course).
585 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
588 * lib/proc.c (proc_read, proc_write): Distinguish between short
589 read/write and real errors.
591 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
592 libpci respects buscentric mode automatically.
594 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
595 bytes of header (the whole standard part).
597 * common.c: pcilib options are now all uppercase. Also moved
598 PCI access debugging option here.
600 * Released as 1.99.2.
602 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
604 * Wrote configure script and rewrote Makefiles.
606 * Removed few unused variables.
608 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
610 * common.c: Moved several functions used in both setpci and lspci
611 here. This includes parsing of libpci-related options.
613 * More library tweaks.
615 * filter.c, names.c: Moved to library.
617 * setpci: Rewritten to use the library.
619 * Released as 1.99.1.
621 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
623 * lspci.c (scan_devices): For cardbus bridges, read first 128
624 bytes of config space to get full standard header.
626 * Makefile (CFLAGS): Removed "-Wno-unused".
628 * Started the "New Generation" branch and introduced the
631 * lspci: Rewritten to use the library.
633 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
635 * Released as version 1.10.
637 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
639 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
640 Dag Wieers <dag@digibel.be>.
642 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
644 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
646 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
648 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
650 * Released as version 1.09.
652 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
654 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
655 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
657 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
659 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
661 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
663 * Released as version 1.08.
665 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
667 * lspci.8: Changed warning about lspci -xxx.
669 * lspci.c: Require "-xxx" for full configuration space dump, so that
670 it's impossible to crash the machine by single typo.
672 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
674 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
676 * lspci.c (show_bases): Better displaying of unassigned and
677 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
680 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
682 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
683 (thanks to Geert Uytterhoeven for finding this out)
685 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
687 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
688 (show_machine): Print subsystem ID.
690 * names.c: New name resolution engine supporting subsystem IDs.
692 * Released as version 1.07.
694 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
696 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
697 (show_bases): Honor the `cnt' argument.
698 (grow_tree): Parse CardBus headers in tree mode as well.
700 * pci.h: Updated CardBus header field description. I still don't
701 have the CardBus standard available, but OZ6832 specs contain
702 full description of all header fields supported by the chip.
704 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
708 * names.c (parse_name_list): Killed an unused variable.
710 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
711 if they are not defined by glibc (needed for glibc built on older
714 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
716 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
720 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
721 should be gone. Again thanks to Steve for bug report.
723 * filter.c (filter_parse_slot): Fixed ":x" type filters.
725 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
726 <steve@icarus.com> for reporting this.
728 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
730 * lspci.c (main), setpci.c (main): Implemented "--version".
734 * pciutils.h (PCIUTILS_VERSION): Added version string.
736 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
737 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
740 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
742 * pci.ids: More updates from Jens Maurer.
744 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
746 * pci.ids: Updates from Jens Maurer.
748 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
754 * setpci.c: Finished.
756 * lspci.c: Now able to fetch expansion ROM base from kernel device list
757 and print it if not in buscentric mode.
759 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
763 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
765 * lspci.8: Updated the documentation.
767 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
769 * filter.c: Introduced new generic device filter.
771 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
773 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
774 of PCI-to-PCI bridges in the tree format.
776 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
778 * lspci.c (show_machine): Added non-verbose mode of machine-readable
781 * pci.ids: Updates from Jens Maurer.
783 * Released as version 1.02.
785 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
787 * lspci.c: Added a "-m" switch for dumping machine-readable
788 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
790 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
792 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
793 if available. This should avoid all problems with official kernel
794 not synchronized to newer PCI code in CVS -- standard distribution
795 of pciutils now contains pci.h from current CVS kernel, pciutils
796 in CVS contain no pci.h and use the correct kernel include.
798 * Makefile: Fixed installation path for man pages.
800 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
804 * lspci.8: Created a man page.
806 * Releasing as version 1.0.
808 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
810 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
811 to all the C sources. This should eliminate problems with 32-bit compilers
814 * lspci.c (show_verbose): Recognize CardBus bridge header type.
815 (show_htype2): Stub routine.
816 (scan_config): Write sensible error message if the kernel denies reading of
817 upper part of the PCI config space.