1 2003-12-26 Martin Mares <mj@ucw.cz>
3 * lspci.man: There was one more explicit reference to /usr/share/pci.ids.
4 Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <macro@ds2.pg.gda.pl>.
6 * setpci.c (main): Better error messages.
8 * setpci.c (ex_op): The demo mode should disable only writing, not reading.
10 * setpci.man: The documentation was inconsistent on what should -D do.
11 Document the new behaviour.
13 * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
14 the GCC specific __attribute__((noreturn)) and killed the hack with
15 redefining __attribute__ on non-GCC compilers.
17 * Makefile: Added missing dependencies. Parallel builds work now.
18 Problem reported by Andreas Haumer <andreas@xss.co.at>, but I chose
21 * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
22 command every time $(MANDIR) is referenced.
24 * lspci.c (main): The error message for `lspci -s' incorrectly mentioned
25 a `-f' switch. Reported by Steve Finney <Steve.Finney@SpirentCom.COM>.
27 * lib/generic.c: Removed memory leak in pci_generic_bus_scan().
28 Reported by Gary Parnes <gary_parnes@terago.com>.
30 * Replaced obsolete syntax of __attribute__((unused)) in the middle of
31 parameter declarations (which is no longer supported by GCC 3.1) by the
32 current syntax (attribute at the end). Thanks to pixel@mandrakesoft.com
33 for reporting this problem.
35 * Removed CVS $Id$ tags from all files.
37 * Makefile: Added some more warnings.
39 * setpci.c: Cleaned up mask/value code.
41 2003-12-08 Thayne Harbaugh <tharbaugh@lnxi.com>
43 * setpci.c: Individual bits to be set can be specified as <value>:<mask>.
45 2003-11-29 Martin Mares <mj@ucw.cz>
47 * Imported the pciutils sources to my Arch repository. Good-bye, CVS.
49 2003-01-04 Martin Mares <mj@ucw.cz>
53 * Makefile: Changed configuration of installation directories --
54 all paths are now set at the top of the Makefile instead of being
55 scattered between the installation rules. The default installation
56 now goes always to /usr/local regardless of the OS as most distributions
57 already contain some version of pciutils and we don't want custom
58 installations to interfere with the default ones.
60 * Makefile: Removed a couple of ancient install hacks: we no longer
61 try to avoid overwriting a newer pci.ids file (users are now expected
62 to use update-ids) and we don't try to remove /etc/pci.ids (a long time
63 has passed since the last version which used it).
65 * Makefile: Paths to pci.ids in man pages automatically get the right path.
67 * Added the update-ids utility.
69 * lib: Removed partially implemented "syscall" access method which will
70 probably never be needed.
72 2002-12-27 Martin Mares <mj@ucw.cz>
74 * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.
76 * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
77 discontiguous numbering of functions. This is already present in the Linux
78 kernel for several years, but I forgot to update pciutils as well.
80 2002-12-26 Martin Mares <mj@ucw.cz>
82 * lib/header.h, lspci.c: Dump AGP3 flags and speeds.
84 * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
85 there is no reason to prefer the kernel version.
87 * lib/proc.c (proc_scan): Don't forget to initialize hdrtype.
89 * Added preliminary version of NetBSD support by Quentin Garnier
90 <netbsd@quatriemek.com>.
92 2002-04-06 Martin Mares <mj@ucw.cz>
94 * lspci.c: Mention "-xxx" in the help.
96 2002-03-30 Martin Mares <mj@ucw.cz>
100 * Removed pci.ids from the CVS as they are now maintained separately.
101 They are still included in the tarball, but if you are building pciutils
102 from CVS sources or you want to get a newer ID file than the one distributed,
103 just use "make update-ids" to download the most recent snapshot from
106 * Makefile, README: Updated accordingly.
108 * Makefile: Added a couple of maintenance targets.
110 * maint/*: Maintainer's utilities now reside here (present only in CVS,
113 * lib/names.c (parse_name_list): End-of-line comments are no longer
114 supported. Hashes are now perfectly valid in all names and they start
115 a comment only at the start of the line.
117 2002-03-26 Martin Mares <mj@ucw.cz>
121 * Makefile: When the currently installed pci.ids file is newer than
122 the version to be installed, don't overwrite it. Suggested by
123 Jean Delvare <khali@linux-fr.org>.
125 2002-03-24 Martin Mares <mj@ucw.cz>
127 * lspci.c (show_pcix_bridge): Added PCI-X capability display.
128 Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
130 * lib/header.h: Added PCI-X stuff. Again by Jeff.
132 * Makefile (CFLAGS): -Werror is gone.
134 * lspci.c (format_agp_rate): Fixed AGP rate reporting.
136 * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
139 * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
140 or device hexadecimally, don't confuse it with chip vendor/device ID.
141 First reported by Marc Boucher <marc@mbsi.ca>.
143 2001-11-04 Martin Mares <mj@ucw.cz>
147 * pci.ids: Synced with the PCI ID Repository at SourceForge
148 (http://pciids.sourceforge.net/).
150 2000-08-25 Martin Mares <mj@albireo.ucw.cz>
152 * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
154 2000-06-13 Martin Mares <mj@albireo.ucw.cz>
156 * Makefile (uninstall): Fixed.
158 * pci.ids: ID updates.
160 2000-05-20 Martin Mares <mj@albireo.ucw.cz>
164 * pci.ids: ID updates.
166 * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
168 2000-05-04 Martin Mares <mj@albireo.ucw.cz>
170 * lspci.c (show_verbose): If the header type doesn't match device
171 class, just print a warning and still use the header type, assuming
174 2000-05-01 Martin Mares <mj@albireo.ucw.cz>
176 * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
178 * pci.ids: Updated Contemporary Control ARCnet card entries.
180 * pci.ids: Synchronized class list with latest PCI SIG documents.
182 2000-04-29 Martin Mares <mj@albireo.ucw.cz>
184 * lib/names.c (pci_lookup_name): Fixed the cheat.
186 * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
188 * pci.ids: Various ID updates.
190 2000-04-21 Martin Mares <mj@albireo.ucw.cz>
194 * pciutils.spec: Added German description.
196 * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
197 are the same as device ID and just output subsystem name according to
200 * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
202 * lib/pci.h: Added the correct typedefs for AIX.
204 * lib/generic.c (pci_generic_scan_bus): Export.
206 * lib/configure: Detect AIX. Use "echo '...\c'" instead of
207 "echo -n" if the shell isn't bash.
209 * lspci.c: Avoid using alloca() if not compiled by GCC.
210 (insert_dev): Avoid returning a void value.
212 * Makefile: Choose which install utility to use according to
213 OS type. Also use `-o' instead of `-or' in find arguments.
214 Part of the AIX port.
216 * lib/aix-device.c: Added AIX low-level interface. Contributed
217 by Dave Johnson <ddj@brown.edu>, thanks a lot!
219 * pci.ids: Few new ID's.
221 * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
222 when not compiled by GCC.
224 2000-04-17 Martin Mares <mj@albireo.ucw.cz>
228 * pci.ids: Added a large batch of ID's contributed by Gunther
229 Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
230 list with the 2.3.99pre6 kernel.
232 Thu Mar 9 13:11:39 2000 Martin Mares <mj@albireo.ucw.cz>
234 * lib/example.c: Added a simple example of how to use
237 * lspci.man, setpci.man: Revealed --version. Well spotted
240 * pci.ids: Added lots of new ID's and synced with 2.3.50.
242 Tue Feb 15 00:16:21 2000 Martin Mares <mj@albireo.ucw.cz>
246 * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
247 %{_mandir} to find the right location to install manual pages to.
251 * setpci.c (main): Don't crash when `-s' or `-d' is given with
254 Mon Jan 24 20:04:11 2000 Andreas Jaeger <aj@suse.de>
256 * lib/i386-ports.c: Include <asm/io.h> only on systems without
259 Mon Jan 24 11:24:43 2000 Martin Mares <mj@albireo.ucw.cz>
261 * Makefile: Modified to work with the Linux FHS brain-damaged idea
262 of putting man pages to /usr/share/man. Now we choose either /usr/man
263 or /usr/share/man depending on which one exists.
265 Sun Jan 23 10:52:34 2000 Martin Mares <mj@albireo.ucw.cz>
267 * pci.ids: Synced with Linux 2.3.40.
269 * Released as version 2.1.4.
271 Thu Jan 20 11:08:32 2000 Martin Mares <mj@albireo.ucw.cz>
273 * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
275 * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
277 * lspci.c (format_agp_rate): Better formatting of AGP rates.
281 * lib/configure: Added configuration for ia64 (the same as for Alpha).
282 Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
284 Thu Jan 13 23:01:52 2000 Martin Mares <mj@albireo.ucw.cz>
286 * Released as version 2.1.3.
290 * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
292 * lib/access.c: Corrected order of access methods -- it's wonderful how
293 long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
295 Sat Dec 11 23:34:48 1999 Martin Mares <mj@albireo.ucw.cz>
297 * Released as version 2.1.2.
299 * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
301 Sat Dec 4 13:11:03 1999 Martin Mares <mj@albireo.ucw.cz>
303 * Released as version 2.1.1.
305 * pci.ids: Several new ID's.
307 * setpci.c (exec_op): Don't forget to increment address after writing
308 single value, so that `30.b=12,34,56,78' works as expected. Reported
309 by Petr Soucek <petr@ryston.cz>.
311 Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz>
313 * lspci.c (show_terse): If prog-if is zero, but it's present in the
316 Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
318 * Released as version 2.1.
320 * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
321 lots of contributed entries.
323 Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
325 * pci.ids: Added lots of subsystem definitions.
327 Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
329 * setpci.man: Better example.
331 * lspci.c: Resolve prog-if names.
333 * lib/names.c: Adapted to new pci.ids syntax.
335 * pci.ids: Reorganized the pci.ids file. Subsystems are listed
336 under devices, classes can optionally contain prog-if information.
337 New ID's, as usually.
339 Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
341 * pci.ids: New ID's. As usually.
343 * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
344 unless we're vvvery verbose.
346 Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
348 * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
350 Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
352 * pci.ids: New ID's. Again.
354 Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
356 * lspci.c (show_size): Don't show size if it's zero (usually
357 due to bus-centric mode being enabled).
359 Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
361 * lib/pci.h: Types are OS dependent.
363 * lib/internal.h: Byte order hacks are OS dependent.
365 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
367 * lib/Makefile, lib/access.c: Added fbsd-device target.
369 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
370 incorrectly set to device ID.
372 * README: Added a note that we support FreeBSD.
374 * Makefile (PREFIX, ROOT): Set it depending on the OS.
375 (%.8): Grrr, BSD date is not able to convert date formats the same way
376 as GNU date does. Use sed instead.
377 (install): Use `-c' when calling install.
379 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
380 by Jari Kirma <kirma@cs.hut.fi>.
382 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
383 and pwrite only when we are certain it's safe (i.e., glibc 2.1
384 on all architectures or any libc on a i386 where we really know
385 how to use syscalls directly). In all other cases, emulate it
386 with lseek/read/write.
388 * pci.ids: Some more IDs.
390 Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
392 * pci.ids: Added IDs of parallel port controller cards as sent
393 by Tim Waugh <tim@cyberelk.demon.co.uk>.
395 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
397 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
399 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
402 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
403 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
404 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
405 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
408 * lspci.c (show_msi): Added dumping of the MSI capability.
409 (show_slotid): The same for SlotID capability.
410 (show_caps): Seperated capability dumping, because it should
411 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
412 layout of htype2, so I'm a bit unsure about it wrt capabilities
413 -- they at least have to live somewhere else since address 0x34
414 is already defined differently in htype2.
416 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
417 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
418 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
420 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
421 (required by the PCI 2.2 specs).
423 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
425 * lspci.c (show_size): Added new function for dumping of region sizes.
426 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
429 * lib/pci.h (struct pci_dev): known_fields moved to the public part
432 * Added support for region sizes. Needs support in the kernel, because
433 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
434 now returns a bitmask of what fields were really read.
436 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
439 Added `uninstall' target - removes all traces of pciutils.
441 - Lots of cleanups in the ATI, S3, Adaptec vendors.
442 - Changed Compaq QVision 1280/p definitions, as it's not possible
443 to determine the revision from the device ID.
444 - Same for the Tseng ET4000.
445 The id's said I had a rev C, when it was actually a rev B.
446 - Removed some unnecessary strings
447 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
448 `Ethernet card'. This should be determined from config space.
449 - Lots of other new vendors & devices
450 - Other additional small cleanups.
452 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
454 * lib/names.c (pci_lookup_name): When device ID lookup
455 fails, return hexadecimal device ID instead of vendor ID.
456 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
457 I've just extended the fix to subsystem ID's.
459 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
461 * lspci.c (show_agp): Bug fix from Petr Vandrovec
462 <vandrove@vc.cvut.cz>. The command register was displayed
465 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
467 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
468 numbers if not supplied by the libc.
470 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
472 * Released the whole package as version 2.0.
474 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
476 * pci.ids: Added several new ID's contributed by people
477 on the linux-pci list.
479 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
481 * lspci.c: Display I/O addresses correctly on sparc64.
482 * lib/header.h: Ditto.
484 * lib/configure: On sparc set HAVE_64BIT* as well, we want
485 a binary which works on both 32bit and 64bit SPARCs.
487 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
489 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
492 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
494 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
496 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
497 as a multi-function device, because several single-function devices
498 don't decode the function bits at all.
500 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
502 * Makefile (install): Don't use "-o root -g root" for installation
503 since it breaks on machines where programs are not installed by root.
504 Reported by Richard Gooch <rgooch@atnf.csiro.au>
506 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
508 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
510 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
511 or 64-bit depending on CPU.
513 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
514 according to bus address width.
516 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
518 * Released as 1.99.4.
520 * lspci.c: Capability list parser now recognizes both AGP
521 registers and PCI Power Management registers (the latter
522 is mainly guesswork based on DEC/Intel 21153 bridge specs
523 since I don't have the PCI Power Management document).
525 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
528 * lspci.c: Added bridge checks to bus mapping code.
530 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
532 * lspci.c: Implemented bus mapping mode (-M).
534 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
535 (show): Split to show() and show_device().
537 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
538 set it to the real access method afterwards.
540 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
542 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
543 don't check PCI_COMMAND for I/O and memory enables.
545 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
547 * Makefile: Added target `release' which substitutes new version
548 number to .spec, .lsm and README. Also rewrote target `dist'.
550 * Released as 1.99.3.
552 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
554 * lib/header.h: Until kernel adopts new layout of PCI
555 includes (i.e., separate declaration of header structure,
556 functions and device IDs), which is not going to happen
557 before 2.3, we'll use our own definiton of the header.
559 * lspci.c (show_verbose): Display `Cap' flag in device status.
561 * lspci.c (show_htype0): Display capability lists whereever
562 available. The only capability name we recognize now is `AGP'.
563 Unfortunately, capabilities are stored in device-dependent
564 portion of the configuration space and are thus available
565 only to root unless you read a dump.
567 * lspci.c (scan_devices): Use cache instead of buffering.
569 * lib/buffer.c: Removed (obsoleted by the cache).
571 * lib/access.c: Added general caching mechanism.
573 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
575 * pci.ids: Added few devices.
577 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
579 * Version string is now defined in top-level Makefile, exported
580 to the configure script and also substituted to man pages.
582 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
583 (show_verbose): Rewrote interrupt display logic.
585 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
587 * lib/configure: Rewrote detection of Linux versions. Now it
588 works on 2.0 kernels (only with direct/dump access, of course).
590 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
593 * lib/proc.c (proc_read, proc_write): Distinguish between short
594 read/write and real errors.
596 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
597 libpci respects buscentric mode automatically.
599 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
600 bytes of header (the whole standard part).
602 * common.c: pcilib options are now all uppercase. Also moved
603 PCI access debugging option here.
605 * Released as 1.99.2.
607 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
609 * Wrote configure script and rewrote Makefiles.
611 * Removed few unused variables.
613 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
615 * common.c: Moved several functions used in both setpci and lspci
616 here. This includes parsing of libpci-related options.
618 * More library tweaks.
620 * filter.c, names.c: Moved to library.
622 * setpci: Rewritten to use the library.
624 * Released as 1.99.1.
626 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
628 * lspci.c (scan_devices): For cardbus bridges, read first 128
629 bytes of config space to get full standard header.
631 * Makefile (CFLAGS): Removed "-Wno-unused".
633 * Started the "New Generation" branch and introduced the
636 * lspci: Rewritten to use the library.
638 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
640 * Released as version 1.10.
642 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
644 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
645 Dag Wieers <dag@digibel.be>.
647 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
649 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
651 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
653 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
655 * Released as version 1.09.
657 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
659 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
660 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
662 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
664 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
666 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
668 * Released as version 1.08.
670 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
672 * lspci.8: Changed warning about lspci -xxx.
674 * lspci.c: Require "-xxx" for full configuration space dump, so that
675 it's impossible to crash the machine by single typo.
677 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
679 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
681 * lspci.c (show_bases): Better displaying of unassigned and
682 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
685 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
687 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
688 (thanks to Geert Uytterhoeven for finding this out)
690 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
692 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
693 (show_machine): Print subsystem ID.
695 * names.c: New name resolution engine supporting subsystem IDs.
697 * Released as version 1.07.
699 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
701 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
702 (show_bases): Honor the `cnt' argument.
703 (grow_tree): Parse CardBus headers in tree mode as well.
705 * pci.h: Updated CardBus header field description. I still don't
706 have the CardBus standard available, but OZ6832 specs contain
707 full description of all header fields supported by the chip.
709 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
713 * names.c (parse_name_list): Killed an unused variable.
715 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
716 if they are not defined by glibc (needed for glibc built on older
719 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
721 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
725 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
726 should be gone. Again thanks to Steve for bug report.
728 * filter.c (filter_parse_slot): Fixed ":x" type filters.
730 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
731 <steve@icarus.com> for reporting this.
733 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
735 * lspci.c (main), setpci.c (main): Implemented "--version".
739 * pciutils.h (PCIUTILS_VERSION): Added version string.
741 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
742 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
745 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
747 * pci.ids: More updates from Jens Maurer.
749 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
751 * pci.ids: Updates from Jens Maurer.
753 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
759 * setpci.c: Finished.
761 * lspci.c: Now able to fetch expansion ROM base from kernel device list
762 and print it if not in buscentric mode.
764 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
768 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
770 * lspci.8: Updated the documentation.
772 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
774 * filter.c: Introduced new generic device filter.
776 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
778 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
779 of PCI-to-PCI bridges in the tree format.
781 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
783 * lspci.c (show_machine): Added non-verbose mode of machine-readable
786 * pci.ids: Updates from Jens Maurer.
788 * Released as version 1.02.
790 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
792 * lspci.c: Added a "-m" switch for dumping machine-readable
793 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
795 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
797 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
798 if available. This should avoid all problems with official kernel
799 not synchronized to newer PCI code in CVS -- standard distribution
800 of pciutils now contains pci.h from current CVS kernel, pciutils
801 in CVS contain no pci.h and use the correct kernel include.
803 * Makefile: Fixed installation path for man pages.
805 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
809 * lspci.8: Created a man page.
811 * Releasing as version 1.0.
813 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
815 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
816 to all the C sources. This should eliminate problems with 32-bit compilers
819 * lspci.c (show_verbose): Recognize CardBus bridge header type.
820 (show_htype2): Stub routine.
821 (scan_config): Write sensible error message if the kernel denies reading of
822 upper part of the PCI config space.